Creative Zen vision 3.7" connecting to tv iss

i try to connect it to my tv, it works and i can see it on the tv yay, but after some minutes the colors start flacking(or however it's written), 2 times in a row this happened 7 mins after i turned it on, and sometimes it flacks when i connect it, this is pissing me off, any idea whats wrong?Message Edited by SimSim on -5-200603:36 PM

Be sure you have the latest XP service pack and WMP0 installed in your computer. You can also check this Knowledgebase article SID9287 and follow its troubleshooting guide in the mean time.
Jason

Similar Messages

  • Creative Zen Vision M 30g wont dock

    Creative Zen Vision M 30g wont dockt Hello,
    Purchased the above player off of ebay, the player works in everyway but will not dock with the computer. I bought this for my son for Christmas because I have one and love it. Mine docks with the computer but his will not. When I try to dock the connection will turn the player on but the docking symbol will not come on.
    I have tried several different connector clips and usb cables and nothing, but all of the same clips and cables work just fine on mine. Also, when I use the wall charger for the player that does work and does charge.
    Any suggestions, and also could for some reason could the connection part at the bottom of the player be damaged in some way?
    Ive tried the reboot suggestion, Ive formated the player and nothing works.
    Sincerely,
    Alan

    Re: Creative Zen Vision M 30g wont dock?
    Darthvader6 wrote:
    Hello,
    Purchased the above player off of ebay, the player works in everyway but will not dock with the computer. I bought this for my son for Christmas because I have one and love it. Mine docks with the computer but his will not. When I try to dock the connection will turn the player on but? the docking symbol will not come on.
    I have tried several different connector clips and usb cables and nothing, but all of the same clips and cables work just fine on mine. Also, when I use the wall charger for the player that does work and does charge.
    Any suggestions, and also could for some reason could the connection part at the bottom of the player be damaged in some way?
    Ive tried the reboot suggestion, Ive formated the player and nothing works.
    Sincerely,
    Alan
    Yes that could be .You may want to return to the seller if you can.Are you using WMP? Try opening Media Player & going to the sync tab to see if that helps it to load the driver for recognition.Formatting the player again could help also. In the past I have had to format more than once for a player to be seen by Windows.

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • Creative Zen Vision M (30gb) - Is it the end?

    Hi all,
    I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
    I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
    Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
    Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
    I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
    So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
    Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

    If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

  • Zen Vision M 30gb Connection Prob

    Hello,?After using my Zen for months without any problems, yesterday, I couldn't make my player recognized by either Windows Media Player or Zen Vision:M Media Explorer. I made a big search on the internet, found too many posts, followed the instructions and nothing happened. - My operating system is SP2 installed Windows XP.- My Zen is fully charged.- I tried all 6 USB inputs.- I also tried three different USB cables.- In Device Manager, I can see my Zen with the name "Creative Zen Vision:M" under the Portable Devices category. No problems, no question marks, no conflicts...- I made the "Permissions for Everyone" change from Registry. People recommended me to install the latest firmware but it also says "your device is not connected". Then in another forum, I noticed that some people are experiencing problems with Media Player . I tried to uninstall it but couldn't do that, too! I tried to rollback the drivers, nothing happened. I tried to delete the files and registry keys, nothing happened. I tried to install Media Player 0 on , of course nothing happened. I want my Zen back! Your suggestions will be very much appreciated. )?Thanks,Ozan.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Zen Vision M not connecting

    ?I've searched through everything I could find here and tried them all, to no avail. Here's what's happened. My Zen Vision M (30 Gb) wouldn't start when connected to 3 different PCs I use it with. I figured it needed firmware update or something, so I tried that, but all update tools say I need to connect the Zen. I tried clean up and formatting all to no avail. Same not connected issue. Then I searched through the forum and saw the exclamation point in device manager issue, so I uninstalled and then plugged it back in. No more exclamation point and it shows up in device manager, but none of the firmware update options recognize the Zen is connected (or Media Player 0 or ). Device manager says it's operating fine, but Zen Media Explorer, MP3 recovery tool, and Media player do not recognize it as connected. Since it's older, all Creative said was EOSL... Are there things I haven't tried?

    Re: Zen Vision M not connecting,Thanks, I had thought I'd tried everything, but as it turns out, one laptop I was using that I thought had Media Player 0 had . I don't think my player was ever exposed to 0, but I rolled back one on a laptop to 0 and then tried the firmware updater I had saved on that laptop and it worked! I'm back in business!? Now am reloading about 25 Gb of music, but that's a pain I can deal with. I tried the different cords and as for OS, one is Vista, one XP Media Center, and one XP. All are up-to-date with service packs etc. I had just updated Norton 360 and I read somewhere that it can mess up USB ports, so that may have started all the fun. In the end, thanks to all in these forums as I never would have thought of rolling back Media Player and the other things I did. Kudos to all....

  • HELP!!! Creative Zen Vision M - unresponsive in ANY way...NEED HELP!

    Ok, so this might be a very simple question to answer, but I'm very worried.
    Pretty much, I had been using my Creative Zen Vision M (30 gig) for a long time, but stopped about a year ago. The batteried drained, and I didnt get around to charging it.
    Now, it's been about a year, and I've tried plugging in the Zen into my computers to charge.
    There is NO recognition of the player, no yellow alert, no new device alert, NOTHING.
    The blue light at the top DOES NOT flash
    And My media explorer thinks that it is not connected to the computer.
    I've read a lot about Zens going black, and the blue light keeps flashing, but literally, from the time I plug in the Zen, to when it's sitting on my shelf, I notice no difference. I cannot turn on the player and it wont charge.
    I tried using USB ports in the back, as well as leaving the zen plugged in all day to "Charge". Over 8 hours later, and the player does not budge.
    I do not own an adapter to the Zen, but I tried a 4.5V sony one, and recieved nothing.
    The simple question is:
    After letting the player drain, and die after just under a year of no use, has my player bit the bisquit's
    OR
    Is my battery (or firmware, which unfortunately I have no idea what it is, but it sounds like I can upgrade without having the player turn on) simply taking it's sweet time to recouperate.
    PLEASE LET ME KNOW!!! I am very desperate to get my player working again.

    Leave the player connected to the computer & use a REAR USB port(with the computer on) for 24hrs. Or use a wall charger to charge the battery . It may take a hour for it to just start charging plugged in but once it does let it FULLY charge. That means until it stops blinking the battery icon it full & the player cuts off when done. Now I know Creative wall chargers are not easy to find & they are not cheap. The Sony PSP wallcharger is compatible with the players adapter(plugs into the center hole on the dongle) Also to get it charging after it has been connected for a time hit the Reset? while connected.Not easy but doable with a thin pin.

  • Sick Of This - Creative Zen Vision:M isn't recognized by SO

    Hi everyone,
    My PC doesn't recognice my Creative Zen Vision:M 30GB, it used to show my mp3 player as connected before, but since last week neither my PC nor the Creative Media Explorer can't connect to the player.
    I have reverted the Microsoft Windows Media Player to the v0.
    My SO is XP SP3.
    I already have installed the Creative Media Source.
    I couldn't get into "reboot mode" on my mp3 player 'cause it has run out of battery.
    Thanks in advance.

    Zen Vision M 309Well, I had my zen for going on 3 years...Strangest things is that it will not turn on at all.. I tried all the online documents
    -Resetting it with the USB (nothing plugged in , using the back ports)<-- in which my computer does not recognize the device even if i change to another computer or another USB port; i even purchased another USB cord and same results
    - I bought a wall charger (left it plugged in overnight); nothing i only see the CREATIVE screen that displays, doesn't respond to any buttons I push
    Same two?effects will wall charging/ computer charging
    -When plugged into computer or wall sometimes it will show the CREATIVE screen, or sometimes it will show a blinking light above where the power is...
    I tried also to reset it while it powers on and it doesn't do anything
    When trying to update the firmware, a message says that the device is not connected when it is..
    This is becoming expensi've, and i cannot find my receipt to even get a warranty,,, please help

  • Where I can find free drivers for Creative Zen Vision

    I've lost my Creative Zen Vision:M drivers, so I can't share with my friends my music, videos and photos. Do you know where I can find these free drivers for Zen Vision:M?

    I've downloaded Creative ZEN Vision:M 30 GB Firmware .62.02e and it says to me "Your player is not connected, please connect your player". I've connected my Creative Zen Vision:M with PC and it always says to me "Your player is not connected, please connect your player". What I must do now Thanks.

  • Creative Zen Vision:M Problen, PLEASE HELP

    I have had my Creative Zen Vision:M for a little over a year now. I has remained my favorite MP3 player by far in comparision to the rest of the competition. The problem I am having is that recently I went to transfer some music onto it after I hadn't done it in a while. I opened up the Creative Zen Vision:M Explorer, and to my dismay it said that the player was not connected. I have tried multiple reconnections with the wire, startup/shutdown many times even uninstalled and reinstalled the software but it always remains having the transfer files etc options faded out regardless of the player being connected or not. The Device manager has it listed without the yellow exclamation point so I know it is recognized by the computer but I am at a total loss for what to do now. Also, I have tried system restore to a time where it was working properly but to no avail it's the same thing. Any advice will be appreciated.

    well im not really scared. but it won't wpork anymore. like everytime i turn it off reset it or reboot it. it would just show the recovery mode and nothign else. that worries me ebcause i can't get it to work as normal agains. =[ so yea. maybe the filmwire thingy would work.

  • Creative Zen Vision M Vista Problem(s

    I have recently purchased a creative zen vision M and its a great player. However I am having problems with vista ultimate 64 bit edition, it seems everytime I connect my player it stalls the player (it locks on the dock screen) meaning I cant access files on the player. I have the lates creative media source , play for sure plugins and the latest firmware (it dident stall before I put the latest firmware on)
    THe player docks fine on my spare Windows XP machine, but it would be nice to have it dock with my primary machine which is sadly vista :P lol
    Any advice/comments ?
    Thanks

    here try this, work for melink

  • Creative Zen Vision M won't power up. Doesn't even show LED lig

    I received a Creative Zen Vision M as a Christmas gift last year. Worked fine for about 3 months, then I started having repeated freezing problems. Fixed those, but eventually the unit just died. No indication of any power. Not even the blinking light. Went to Best Buy where it was purchased, but they could not help. Best Buy tried to find a purchase record, but no luck. After giving up on it for a few months, I thought I'd try again today. I've had it connected by USB for the last 7 hours, but no luck. So what can I do now I like the Creative Zen products (I have had no problems with another Creative MP3 player), and I'd love to get this player working again because I enjoyed watching movies on it in flight.
    Your thoughts would be appreciated.

    This happened to me once, so I purchased a new battery, then left it plugged in for a few hours after that.
    It froze when I started it up, but when I reformatted it, everything worked fine again.
    That may or may not help, sorry.
    Good luck =]

  • Creative Zen Vision:M FM Radio Completely Disappeared!! (Reinstalling firmware doesn't hel

    I turned on my Creative Zen Vision: M, and the FM Radio wasn't there. It just simply disappeared; it's not listed on the Main Menu, nor is it listed as an option from "Configure Menu". This has nothing to do with a new Firmware update that removes the?radio; my player was not connected to?my computer. I have had my player since July of 2006, so it's obviously too late to return it. I've looked around on the forum and many other people have had the same problem, but the only solution has been to reinstall/upgrade the firmware. This doesn't solve the problem. I've tried everything on the recovery menu--formatting, rebooting, cleaning disk, etc, but nothing has worked. I've also contacted Customer Support, but from what I've heard, it's probably not going to help. Has ANYONE been able to solve this problem? It's really frustrating that so many people have this problem and nothing has worked.

    Oh, right, sorry.
    "OS Name: Microsoft Windows XP Home Edition
    Version: 5..2600 Service Pack 2 Build 2600"
    Though currently, I'm installing Windows XP Service Pack 3 via Windows Automatic Updates.
    WMP Version: .0.572.5230
    Should I uninstall WMP entirely to eliminate it as a possible factor?
    (I have Winamp so I don't really need WMP.)
    Are you saying that once I rollback my WMP to WMP0, my computer will be capable of reading my Zen & thus, allowing me to download the firmware and restoring it's previous condition (minus the contents-music, video, pictures, etc.)
    Also, I tried to see if my Zen would try to connect to my laptop - I uninstalled the Zen program on it before connecting it, to see if anything would come up, allowing me to do anything, etc. But no, it just said "My Zen" but I couldn't do anything with that. And then I installed all of the software on the Creative Installation CD. After all of that, apparently my computer acknowledges that a device is connected via USB because it gives me an option as to what to do with it - open it, play it with wmp, explore, etc. The problem though was that the Creative program itself wouldn't acknowledge that it was connected. So I still had the "The player is not connected."
    Just thought this might make a difference -
    I also was looking for some kind of repair shops or sites that would be capable of repairing my Zen - the only thing I came across was http://www.zenrepair.com/Zen/index.jsp - does anyone know anything about this site? If it's reliable, etc. (Just a back up option in case this situation isn't solveable by other Zen peers.)
    Also, thanks again for any help, effort, attempt, etc.

  • Firmware Problem Creative Zen Vision : M 30

    Hello
    I switched my Creative Zen Vision : M 30gb on today to find a firmware problem screen.
    I tried to dock it with my PC but it was not working.
    Tried using the reset button but it doesnt work
    Tried going into recovery mode to reload the firmware but when i try to put the update on its says my player is not connected.
    I tried using the MP3 recovry tool which recognizes my player but then when it tries to install the firmware it says it is not connected.
    The firmware it is trying to put on says it for the 60gb model, would this stop it from reconizing my player?
    It says it for a DVP-HD0004 but on the back of mine it says it is a DVP-HD0003
    Could anyone find the right software because i cant find it's
    Michael

    The first step is to do a cleanup >reboot on the player if that don't work? then while connected uninstall thru Device Manager,reboot computer then plugin to have Windows find & reinstall the player, if that? doesn't work then format,cleanup>reboot player to see if that solves the problem. loosing files is a last resort . Whatever you do DO NOT choose RELOAD FIRMWARE as you don't have recognition from the computer & can not reload it. RELOAD firmware ERASES the firmware making the player useless until it can be reloaded. Link for resue/recovery access on player? http://forums.creative.com/creativel...ap&thread.id=3

  • Creative Zen Vision: M Software problems, player not detec

    <SPAN class=postbody>hi, i just got a creative zen vision: m a couple of days back and i've had problems with it being detected by my computer. i've installed the software but when i connect the player to my pc, it shows up for about a second then it's not detected anymore. i brought it back to the store for them to check and it works on their lap-top. any ideas?Message Edited by wongkenji on 08-06-2006 08:26 PM

    wongkenji wrote:
    hmm.. something just struck my mind, do you think my printers could be affecting it's i'll go back and try later, hopefully it'll work. otherwise i have no idea lol.. thanks for the help!
    Hmm, your printer?
    I sort of doubt that...hmmm.
    Did you contact CS?

Maybe you are looking for

  • How to get the changed lines in POWL

    Hi Experts, I need your help on POWL. In the project I have set some fields as input field and they are editable. But I cannot get the lines which i have changed, and the method handl_action wasn't triggered after i pressing 'Enter' key. How can I so

  • How to simulate sms serviceS

    Hi there Currently I am working on J2ME project but I am stucked in SMS problem. How can I simulate sms sending and receiving to and from emulators. I want to send sms from my PC to emulator and receive sms form emulator. Could you please help me wit

  • Apply update 7.0.3 to Developer version of InDesign Server

    Is there any way i could apply this update to a developer version of InDesign Server? We have an export PDF problem with our Live InDesign Server which we can replicate on our development server. I would like to apply the update to our development se

  • Data protection

    i don't want my data to be accessible outside the firewall, but need to be displayed on a web page If i generate an XML document of an oracle table, data changing daily, and use it to build an html page, does this assure that the data is safe? Where

  • Getting Web Start to use JDK's javaw.exe, not JRE's

    On Windows, I need a Web Started app (actually, my Glossitope desklet) to run with the JDK's javaw.exe, not the JRE's, because I use the Java Compiler API, which is more or less a no-op in the JRE. I've tried using the Java Control Panel to change th