Creative Zen Vision M 30 GB-firmware prob

I want to update me Zen Vision throw Recovery Mode....Select Reload firmware,player remove old firmware. Then i open file of firmware on my PC, but update not see my pleyer : "your pleyer is not . plese connect your pleyer.... WTF? Some body help.Before .50 firmvare i update normaly!(From .40 to .5)?Sorry for my English.i.m from Russia

There are a multitude of problems that could be causing your player to exhibit this behavior in addition to battery failure, including the failure of the main logic board. If the player has been dropped a few times, exposed to excessi've heat, or high humidity/water, the problem might not be the battery. On the other hand, if the battery has been allowed to fully exhaust on a regular basis and left uncharged for long periods, it is possible that the battery could be dead, but LIon batteries usually last at least 2-3 years with regular use and normal recharging practices if they haven't been abused.

Similar Messages

CAUTION!!!! CREATIVE ZEN VISION M 60 GB FIRMWARE 1.21.02

I RECENTLY UPDATED MY FIRMWARE FROM THE ORIGINAL ..04 VERSION THE PLAYER CAME WITH TO THE .2.02 IMPROVED VERSION OFFERED ON THE CREATIVE WEBSITE. THE NEW VERSION WAS SUPPOSE TO IMPROVE THE STABILITY DURING STARTUP. 3 TO 5 SECOND DIFFERENCE IS NO IMPROVEMENT IF IT AFFECTS THE OVERALL OPERATION OF THE PLAYER. THE UPDATED VERSION SCREWED UP MY PLAYER WITH NO IMPROVEMENT WHAT SO EVER. I FOLLOWED ALL INSTRUCTIONS AND BACKED UP ALL MY FILES/VIDEOS. AFTER UPDATING I HAD THE FOLLOWING PROBLEMS:
TAGGED ALBUM ART WOULDN'T SHOW UP ON MP3 FILES THAT DID SHOW ON THE OLD VERSION.
MUSIC FILES WOULD PLAY TO 2 SEC. OF ANOTHER SONG WHILE THE SELECTED MUSIC FILE WAS PLAYING.
WHEN SCROLLING THRU THE FILES THE PLAYER WOULD MAKE A SMALL KNOCKING SOUND AND WOULD FREEZE.
I GOT A HOLD OF TECH SUPPORT AND THIS IS THE ACTUALL RESPONSE THEY SENT ME:
"Based upon the age of your product, it appears it has reached its End of Service Life (EOSL). As such, support for your product is limited to the information and resources that were available on the Creative Customer Support website before it was discontinued."
QUESTION: WHY DO YOU NOT OFFER OLD VERSIONS OF FIRMWARE IF YOUR UPDATED ONES SUCK?
I HAVE HAD MY 60 GB PLAYER SINCE 2005 AND HAVEN'T HAD ANY PROBLEMS WITH IT. SO I GUESS IT'S CONSIDERED IMMORTAL NOW.
IF YOU UPDATE YOUR FIRMWARE AND YOU HAVE ANY OF THE PROBELMS I LISTED BELOW OR JUST WANT TO GO BACK TO YOUR OLD FRIMWARE VERSION. DON'T ASK CREATIVE SUPPORT FOR SUPPORT BECAUSE IT'S NOT THERE.
HERE IS A LINK WHERE I GOT A COPY OF MY OLD..04 FIRMWARE VERSION WHICH WORKS FINE:
http://www.downloadatoz.com/driver/i...ware---04.html
BASED ON THIS TECH SUPPORT EXPERIENCE, ONCE MY PLAYER DOES DIE. I THINK MY NEXT PLAYER OF CHOICE WILL BE THE "ZUNE".
GOOD LUCK ALL!!
FROM "SPIN2PLEAZE"

fazalpro wrote:
Dude... Please Help.... Its happen to me... and I cant get that link you posted...... to download it....can you send me a copy of it.... this is seriously flumped....
You will find the file on this page. http://dapjukebox.altervista.org/mod...y=dateD&show=0

Where I can find free drivers for Creative Zen Vision

I've lost my Creative Zen Vision:M drivers, so I can't share with my friends my music, videos and photos. Do you know where I can find these free drivers for Zen Vision:M?

I've downloaded Creative ZEN Vision:M 30 GB Firmware .62.02e and it says to me "Your player is not connected, please connect your player". I've connected my Creative Zen Vision:M with PC and it always says to me "Your player is not connected, please connect your player". What I must do now Thanks.

Creative Zen Vision:M FM Radio Completely Disappeared!! (Reinstalling firmware doesn't hel

I turned on my Creative Zen Vision: M, and the FM Radio wasn't there. It just simply disappeared; it's not listed on the Main Menu, nor is it listed as an option from "Configure Menu". This has nothing to do with a new Firmware update that removes the?radio; my player was not connected to?my computer. I have had my player since July of 2006, so it's obviously too late to return it. I've looked around on the forum and many other people have had the same problem, but the only solution has been to reinstall/upgrade the firmware. This doesn't solve the problem. I've tried everything on the recovery menu--formatting, rebooting, cleaning disk, etc, but nothing has worked. I've also contacted Customer Support, but from what I've heard, it's probably not going to help. Has ANYONE been able to solve this problem? It's really frustrating that so many people have this problem and nothing has worked.

Oh, right, sorry.
"OS Name: Microsoft Windows XP Home Edition
Version: 5..2600 Service Pack 2 Build 2600"
Though currently, I'm installing Windows XP Service Pack 3 via Windows Automatic Updates.
WMP Version: .0.572.5230
Should I uninstall WMP entirely to eliminate it as a possible factor?
(I have Winamp so I don't really need WMP.)
Are you saying that once I rollback my WMP to WMP0, my computer will be capable of reading my Zen & thus, allowing me to download the firmware and restoring it's previous condition (minus the contents-music, video, pictures, etc.)
Also, I tried to see if my Zen would try to connect to my laptop - I uninstalled the Zen program on it before connecting it, to see if anything would come up, allowing me to do anything, etc. But no, it just said "My Zen" but I couldn't do anything with that. And then I installed all of the software on the Creative Installation CD. After all of that, apparently my computer acknowledges that a device is connected via USB because it gives me an option as to what to do with it - open it, play it with wmp, explore, etc. The problem though was that the Creative program itself wouldn't acknowledge that it was connected. So I still had the "The player is not connected."
Just thought this might make a difference -
I also was looking for some kind of repair shops or sites that would be capable of repairing my Zen - the only thing I came across was http://www.zenrepair.com/Zen/index.jsp - does anyone know anything about this site? If it's reliable, etc. (Just a back up option in case this situation isn't solveable by other Zen peers.)
Also, thanks again for any help, effort, attempt, etc.

Firmware Problem Creative Zen Vision : M 30

Hello
I switched my Creative Zen Vision : M 30gb on today to find a firmware problem screen.
I tried to dock it with my PC but it was not working.
Tried using the reset button but it doesnt work
Tried going into recovery mode to reload the firmware but when i try to put the update on its says my player is not connected.
I tried using the MP3 recovry tool which recognizes my player but then when it tries to install the firmware it says it is not connected.
The firmware it is trying to put on says it for the 60gb model, would this stop it from reconizing my player?
It says it for a DVP-HD0004 but on the back of mine it says it is a DVP-HD0003
Could anyone find the right software because i cant find it's
Michael

The first step is to do a cleanup >reboot on the player if that don't work? then while connected uninstall thru Device Manager,reboot computer then plugin to have Windows find & reinstall the player, if that? doesn't work then format,cleanup>reboot player to see if that solves the problem. loosing files is a last resort . Whatever you do DO NOT choose RELOAD FIRMWARE as you don't have recognition from the computer & can not reload it. RELOAD firmware ERASES the firmware making the player useless until it can be reloaded. Link for resue/recovery access on player? http://forums.creative.com/creativel...ap&thread.id=3

Creative Zen Vision: M, Firmware 1.40.02 and screen backlight not blank

Is there a bug in the .40.02 firmware?
I just bought a Creative Zen Vision: M yesterday.
I noticed that with the out of the box firmware (.30.02), the LCD screen backlight would turn off to conserve battery power.
Later in the day, I upgraded to the .40.02 firmware posted May 24, 2006. Now my LCD screen backlight stays lit all the time.
Since the player is so new, I wonder if I'm imagining things.
Can someone with .30.02 or earlier firmware confirm that their screen backlight turns off after some period of time turning the screen dark?
Can someone reproduce the problem with the .40.02 firmware that the screen backlight stays lit, no matter how long since the last button press?
If I'm not imagining things, this would seem to dramatically affect the playtime on a full charge.
Thanks.

This is INDEED a problem.
The screen is? SUPPOSED to blank all by itself , NOT only with the lock button engaged. I have this exact problem and returned one player only to see the same thing with the next. I also have the .40.02 firmware !!! Creative support said to upgrade my firmware to .6.xx? and see what happens. If the screen doesn't blank by itself without the lock button,? they are sending me another player !

Creative Zen Vision: M 30 gb - DRM information corrupt or missing.....???????

So I just started having this problem yesterday but it seem I'm the only ever to have it. I've scanned every page I can and can't find a solution. Yesterday I started playing my music then all of the sudden it stopped. Granted I was having problems before even though I just got this unit a month..........! I sent an email and still haven't received a response.
Here's the problem. While listening to my music yesterday I encountered a message saying - Playback Error. This error persisted after changing the track. After going home and reformatting, reinstalling firmware, downgrading -> upgrading firmware, reformatting over and over and over again, disk clean up, system restore, reboots, default restore, reformatting, again reformatting, deleting every piece of information I could delete...... you might be getting the picture so far.... After doing all of this I was unable to download tracks again onto my MP3 player. The only ones I can upload are unprotected content. I got thinking maybe there is a problem in my DRM file..... Where is my DRM file on the MP3 player and how do I delete it's You can't. At least not what I found. So again I tried everything over and over again and nothing works. I'm at my wits end trying to figure this out. I have a 30gb Creative Zen Vision: M player, Windows XP/Vista 64, Napster ToGo and now I can't use my MP3. This unit is a month old and I cannot use it. PLEASE HELP ME. This is very long winded but I'm hoping this will help a little. Thanks in advance, I'm going insane without my music.

Well I have never used a service like that. That's all I can think of off hand.

Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Creative zen vision navigat

Creative zen vision
firmware .40.03
problem: i cant use my navigation buttons (so buttons on right side of my zen vision)
and when i remove battery it doesnt help instal new firmware neither go in recover mode.. its working only thing... navigation doesnt work so useless...
so basicly everything worx i guess only my navigation doesnt so i cant do anyting atm
i have read faq and searched forum but nothing specifik for this problem
Message Edited by skeevn on 04--2008 07:43 PM

That sounds like an electrical or electomechanical problem with the player. Since the Zen Vision has been long since discontinued, you probably can't get Creative to repair it, but you might want to seek out some of the third party repair businesses that might be able to restore it to original functionality.

Creative Zen Vision M (30gb) - Is it the end?

Hi all,
I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

HELP!!! Creative Zen Vision M - unresponsive in ANY way...NEED HELP!

Ok, so this might be a very simple question to answer, but I'm very worried.
Pretty much, I had been using my Creative Zen Vision M (30 gig) for a long time, but stopped about a year ago. The batteried drained, and I didnt get around to charging it.
Now, it's been about a year, and I've tried plugging in the Zen into my computers to charge.
There is NO recognition of the player, no yellow alert, no new device alert, NOTHING.
The blue light at the top DOES NOT flash
And My media explorer thinks that it is not connected to the computer.
I've read a lot about Zens going black, and the blue light keeps flashing, but literally, from the time I plug in the Zen, to when it's sitting on my shelf, I notice no difference. I cannot turn on the player and it wont charge.
I tried using USB ports in the back, as well as leaving the zen plugged in all day to "Charge". Over 8 hours later, and the player does not budge.
I do not own an adapter to the Zen, but I tried a 4.5V sony one, and recieved nothing.
The simple question is:
After letting the player drain, and die after just under a year of no use, has my player bit the bisquit's
OR
Is my battery (or firmware, which unfortunately I have no idea what it is, but it sounds like I can upgrade without having the player turn on) simply taking it's sweet time to recouperate.
PLEASE LET ME KNOW!!! I am very desperate to get my player working again.

Leave the player connected to the computer & use a REAR USB port(with the computer on) for 24hrs. Or use a wall charger to charge the battery . It may take a hour for it to just start charging plugged in but once it does let it FULLY charge. That means until it stops blinking the battery icon it full & the player cuts off when done. Now I know Creative wall chargers are not easy to find & they are not cheap. The Sony PSP wallcharger is compatible with the players adapter(plugs into the center hole on the dongle) Also to get it charging after it has been connected for a time hit the Reset? while connected.Not easy but doable with a thin pin.

Sick Of This - Creative Zen Vision:M isn't recognized by SO

Hi everyone,
My PC doesn't recognice my Creative Zen Vision:M 30GB, it used to show my mp3 player as connected before, but since last week neither my PC nor the Creative Media Explorer can't connect to the player.
I have reverted the Microsoft Windows Media Player to the v0.
My SO is XP SP3.
I already have installed the Creative Media Source.
I couldn't get into "reboot mode" on my mp3 player 'cause it has run out of battery.
Thanks in advance.

Zen Vision M 309Well, I had my zen for going on 3 years...Strangest things is that it will not turn on at all.. I tried all the online documents
-Resetting it with the USB (nothing plugged in , using the back ports)<-- in which my computer does not recognize the device even if i change to another computer or another USB port; i even purchased another USB cord and same results
- I bought a wall charger (left it plugged in overnight); nothing i only see the CREATIVE screen that displays, doesn't respond to any buttons I push
Same two?effects will wall charging/ computer charging
-When plugged into computer or wall sometimes it will show the CREATIVE screen, or sometimes it will show a blinking light above where the power is...
I tried also to reset it while it powers on and it doesn't do anything
When trying to update the firmware, a message says that the device is not connected when it is..
This is becoming expensi've, and i cannot find my receipt to even get a warranty,,, please help

I need help with my Creative Zen Vision M 3

Hi!? So I was listening to my creative zen vision M 30g mp3 player when it froze in the middle of a song. I tried to reset it using the reset hole on the bottom. When I reset it, it rebooted to the recovery mode and it has been stuck there ever since. I tried using all the options on the screen, clean up, format all, reload firmware and the reboot. The only one that really works is the reboot. The other ones will go through the motions then stop and give me the message " hard disk problem"? anyway, I can fix this at home or do I have to send it away? I have had it for about /2 now so its factory warrenty has expired so I guess I am concerned about the cost of repair. At the same time however, It was almost $300 when I bought it so I dont want to just settle for the fact that it is now not working.
Any help or advice or similar stories would be helpful. Or cost?Amas2

Hi,
I have this problem for 2 mounth. I have never change anythinhg on my player. And i don't get back errors from the software.
There are mp3 on my player and photos, programs...
I don't know why i can't get back these datas.
When i cancel a date by the logiciel, it say me ok, but when i return to see if it's canceled, it's not do!!!
A message error arri've : "it's cannot be read in the juxbox" (it's a translation).
And i can't listen my music on my computer with the creative's logiciel but i can listen music directly on it!!! very strange problem.
Thank u for your help John.
I hope you can find a solution.
Pupystyler.

Creative Zen Vision : M Hardisk error? W

A few days ago I purchased a Creative Zen Vision: M mp3 player.
Creative Zen Vision : M
So anyway, I put a few song on here about 4 or 5 playlists and all of a sudden... Its went into recovery mode.
The only options its giving me are the following and its repercutions:
v0.0.22
Clean Up - I enter this mode and it gets stuck.
Format All - I've entered this mode already, but it says something about Harddisc error?!
Reload Firmware - Same as format all, it says something about a harddisc error.
Reboot - All this does is restart the mp3.
Im stuck with a brand new mp3 that cannot do any of the functions it says it can do.

I think waiting more then 5 minutes would wield a better result. But I think the player might have a defecti've harddri've. You may need to contact Creative support about it.

Creative Zen Vision:M - awful or no sound at

Hello,
I have a problem with my Creative Zen Vision:M. The player has been running extremely slow for about 2 months and it was bought in January 2006. The player crashes when I play an mp3 file. The FM radio works just fine. I hear a lot of noise or the sound is choppy. I have tried formatting the player and update the firmware, but the problem still persists.
Could somebody please help me out with my issue? And also, if somebody has a link to an older firmware release, please provide one just to check if it is from the firmware.
Thank you in advance!
Regards,
PavelMessage Edited by LittleGrave on 09-04-200706:8 PM

Sounds like a hard-dri've problem - I'd try formatting the hard-dri've, if that doesn't help then I think you may need to return it to Creative to get it repaired. Sorry i can't be more positi've!

Creative Zen Vision M 30 GB-firmware prob

Similar Messages

Maybe you are looking for