Creative Zen Vision M no longer charges with the wall char

I have had a zen vision M for about 5 months and have never had a problem with it til now. I was listening to it this morning and realised it needed charging so i plugged in the charger as well and all was fine. It seemed to charge for awhile and then it stopped and the charge went backwards. Now every time i plug in the wall charger (that came with the player when i bought it in July 2006) it just shows as being on AC power unless i hold it in a specific position. I have it plugged into my computer at the moment and it seems to be charging. the blue light is on and the battery is showing as charging.How do i know if its a problem with my charger or not - i tried my PSP charger as i had seen that in some posts on here and the same thing happened. I think its something internal. I don't want to send it anywhere as of course its out of warranty and i don't want to pay for anything.Anyone have any ideas. I read something about firmware fixing battery charging ability but then it wipes out FM recording - not that i use it that much but i still use it.Anyway im wondering if anyone has any ideas or if anyone else has had the same problem. I searched high and low but i could only find people with charging problems when they first bought the units.Any help would be appreciated as i like to listen to it at work and my work computer won't accept my player as im not an administrator so i can't install it etc. I need to be able to charge it either at home or at work so i can listen to it. Thanks for your time in advance, i really hope someone can help me as i love this groovy player and i just lectured my sister the other day on how much better than an ipod it is and now it goes and does this. Thanks again

It seems to have fully charged. I left it on while i went out and it now says it has full battery although it still seems to be charging. Does that mean there could be a problem with the AC charger slot on the adapter? Is there any way to buy a new adapter? if that seems to be the problem. If i upgrade to the latest firmware can i go back to the original if necessary?

Similar Messages

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • My iPhone 4 will only charge on the computer.  It no longer charges using the wall charger.  I know the wall chargers work.  Anyone have any ideas??

    It no longer charges using the wall charger.  I know the wall chargers work.  Anyone have any ideas??

    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...

  • Why does my iPhone not charge with the wall charger?

    i have recently purchased an iphone 4 (within the last month). it has charged via the wall charger at first but now, the wall charger does not work. it does charge by connecting the USB cable to my computer. is there any way i can get my wall charger working? or will i have to get a new one? thanks.

    Try a different wall socket - if you haven't already and/or try this.... reset the iPad
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider - let go of the buttons. then try again.
    You could also try updating your software as I have no idea which version you are running on your iPad.
    Message was edited by: Demo

  • HELP W/ CREATIVE ZEN VISION: M STUFF AND CHARGING PLZ SO M

    ??Hi, I just bought a zv m and dynex uni'versal mp3 accessory kit (I was going to buy the creative stuffs like power?adapter and a/v cable but he said this worked too and it was?more in count ... i checked on the back of it's product and there was compabilitys with some zens and this one:zvm30engbk wich he said was zen vision m 30g black) all right .. so i bought it ( at usa ) and gone home ( at brazil ) ... yeterday at first time?i tried to charge and it didn't work ... the sign of recharging appears and evberything but it just dont charges ( like i can stay all the time using the mp3 with it's plugged but if i unplug it just turn off automatically?) .. .then i got the think that .. maybe is the voltage .. .here in brazil is 0 volts while there in usa is?220?right ? but after charging it on my computer with?creatives cables and etc i gone test the a/v cable and it didnt work well. .the sound was perfect but the image wasn't showing up ... my dad said it was something about pal video config and not ntsc or whatever?.... but anyways i tried alll the ways and?still?got?no image?=/ ... anyone got some idea of whats going on plz? thanks so very much for your attencion and help.

    hi i need your help . i own a vision m and i cant seem to find how to record my fm radio directly into my vision m . i had the 5g and 8 g and they record ok but i just cant find from where i have to go in to find the record button wen listening to radio

  • My iPod touch 4g won't charge with the wall or computer usb cord!! HELP?

    my ipod 4g wont charge. i've tried plugging it in to different outlets in the wall but to no avail it won't charge. when I put it on my the ipod dock it charges fine, but not with the usb that isn't from Apple. i've turned it off and let it charge and it charged to full battery but i really want to know what's going on with my Ipod. is it the usb or is it the iPod? help please

    Simple, it's the cable.

  • I have had my ipad for 6 months. We had a power failure and ever since my ipad will not charge with the wall adapter that came with it.  It will SLOWLY charge when plugged into computer port. Can anyone help me resolve this?

    I have had my iPad for 6 months.  We recently had a power outage and my iPad was plugged in with the adapter that came with it.  Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer.  Do you think the adapter got fried?  Also do you HAVE to have iTunes with an iPad, they were charging me alot of fees for games I did not download NOR give my password to have them downloaded so I cancelled iTunes because fo too many fees. Could this have anyting to do with the battery not charging?

    Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer. 
    Well, something's definitely wrong if it won't charge from a wall outlet. Make an appointment at a Genius Bar or take it to an Apple certified repair provider.
    As for iTunes charges, according to Apple  iTunes Store: All Sales Are Final
    You can try contacting iTunes Billing:
    http://www.apple.com/support/itunes/
    Click: iTunes Store Account & Billing / Billing Inquiries / Email Us

  • My ipad won't charge with the wall charger

    I have been able to charge my ipad and ipod using the wall charger. Now when I plug my ipad in, it won't charge. It also doesn't charge when plugged into the computer.

    iPad Charging
    "The fastest way to charge your iPad is with the included USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

  • Creative Zen Vision M doesnt st

    Hi, My creative zen vision M does not start. when the power button is pressed and held for a few seconds the blue light just keeps blinking. i've charged the player for over 4 hours yet it doesnt start. while charging, the blue light keeps blinking. I've tried resetting the player but this didnt help either. Does anyone have suggestions? I was told by Creative's customer support to do a cleanup or format but the player doesnt start at all. Could it be some kinda hardware problem?
    I would like to locate a service centre in Mumbai, India so that I can have the player checked.
    Regards, Amlan

    I don't know if it's appropriate, but I've had really good success repairing these units, 6 out of 8 working so far.
    Shoot me an email to [email protected] if any of you want me to look at it. No charge if I can't repair it other than return shipping costs, or I might buy the unit off you if you don't want it back at standard eBay pricing for as is units.
    I do this more for fun than for profit, and want to help.
    Cheers!
    Curt

  • My ipad charges using the usb plug but not using the wall charger. The wall charger works with my wife's ipad2

    My ipad2 only charges with the usb plug. It does not charge with the wall charger, My wife's ipad2 does charge with the same wall charger.

    Stephen-
    Your iPad may have a defective cable.  Try your Wife's and see it it makes a difference.
    I don't know if iPod and iPhone cables are compatible with iPad, but could you have switched by accident?
    Fred

  • Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

    I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • I need help with my Creative Zen Vision M 3

    Hi!? So I was listening to my creative zen vision M 30g mp3 player when it froze in the middle of a song. I tried to reset it using the reset hole on the bottom. When I reset it, it rebooted to the recovery mode and it has been stuck there ever since. I tried using all the options on the screen, clean up, format all, reload firmware and the reboot. The only one that really works is the reboot. The other ones will go through the motions then stop and give me the message " hard disk problem"? anyway, I can fix this at home or do I have to send it away? I have had it for about /2 now so its factory warrenty has expired so I guess I am concerned about the cost of repair. At the same time however, It was almost $300 when I bought it so I dont want to just settle for the fact that it is now not working.
    Any help or advice or similar stories would be helpful. Or cost?Amas2

    Hi,
    I have this problem for 2 mounth. I have never change anythinhg on my player. And i don't get back errors from the software.
    There are mp3 on my player and photos, programs...
    I don't know why i can't get back these datas.
    When i cancel a date by the logiciel, it say me ok, but when i return to see if it's canceled, it's not do!!!
    A message error arri've : "it's cannot be read in the juxbox" (it's a translation).
    And i can't listen my music on my computer with the creative's logiciel but i can listen music directly on it!!! very strange problem.
    Thank u for your help John.
    I hope you can find a solution.
    Pupystyler.

  • Firmeware issues with Creative Zen Vision:M

    My creative Zen vision m 30g had started playing up, songs were being played super fast, or not being played at all, it would also go to FM radio randomly. The first step I took was to format the player and put my music back on, but the problem persisted. I then decided to do a clean up, but again the problem still persisted. I finally decided to reload the firmware, I first downloaded from the site, but when it had got to the final stages it took me to connect my player, but my player was actually connected!
    I then downloaded the Creative MP3 player recovery tool, it detected that I had a creative vision Zen me but it told me in the final stages again that my player wasn't connected. Any help will be greatly appreciated.

    Hi Topstarxx,
    It would be advisable to get in touch with support so that they can help you with this.
    Message Edited by KokChoy-CL on <span class='local-date'> -2-2008<span class='local-time'> 04:45 PM

  • Help with Creative Zen Vision:m navigat

    Hello, I am thrilled to get my new creative zen vision:m player. However, I am confused by the navigation buttons. How do I return to the main menu of the player (the one that contains, music, videos, fm, system etc. sub menus) by a single click?
    I am also not sure about the function of the two buttons on the sides of the touch pad.
    Can anyone please clarify?
    Thanks,

    Press and hold the Menu/Back button to return to the main menu. The two buttons to the side of the touchpad are Previous/Rewind and Next/Fast.
    Cat

  • Creative Zen vision M 30 GB MP3 player does not resp

    My Creative Zen vision M 30 GB MP3 player stopped working. It does not turn on, does not charge, does not respond to anything. Is the battery dead or what would be the problem. Please help.

    There are a multitude of problems that could be causing your player to exhibit this behavior in addition to battery failure, including the failure of the main logic board. If the player has been dropped a few times, exposed to excessi've heat, or high humidity/water, the problem might not be the battery. On the other hand, if the battery has been allowed to fully exhaust on a regular basis and left uncharged for long periods, it is possible that the battery could be dead, but LIon batteries usually last at least 2-3 years with regular use and normal recharging practices if they haven't been abused.

Maybe you are looking for

  • RPD Patching ISSUES in OBIEE 11G

    Hi all, when i am doing the RPD patching in OBIEE 11G i ll be missing one subject area in the process of merging can some one provide the solution for this. i have two rpds one rpd contains the two subject areas and another rpd contains the single su

  • Error : You have encountered an unexpected error. Please contact the System

    Hi All, When i am try to open the system administrator it shows the following error You have encountered an unexpected error. Please contact the System Administrator for assistance. Click here for exception details. Exception details as follows : Exc

  • Unable to calculate the Sub totals

    Hi, Currently we are in BI7. I had created a query based on aging buckets. it has all the calculations in the columns section. I have to calculate the sub totoals based on a particular info object Customer. For that I made the Result rows of the ream

  • Integration with Weblogic Server 10.3.x

    Hello! When I use mod_oc4j in OAS 10.1.2., then I can use the directive Oc4jMount configured OHS. If you use this directive html-code that is returned to the client will contain only the URL that hosts the portal. Get some opaque proxy (much like mod

  • Converting video to Flash

    I need to get right up to speed on this issue. So, does anyone know a website that has what I need to know, and what is the simplest most efficient program for either exporting from FCP to flash, or a converter from QT to Flash. Also, for those in th