Creative zen vision: m syncing problems-please he

if I use WMP to sync playlists to my vision:m, it will sync all the tracks in the playlist but not the playlist itself.
what do I do?

i don't use media player to sync playlists. So i don't know if it will add the file again. Try it I can tell you that Wmp0 did add it again. that may be something that was fixed in WMP. If it adds a duplicate delete it just do a short one for testing. All my music is cds ripped as albums so i can use the creative media explorer to to playlists. i don't have individual lone tracks. The media explorer works perfect when your music library is organized when it isn't then i guess it would seem retarded.

Similar Messages

  • Creative Zen Vision M Vista Problem(s

    I have recently purchased a creative zen vision M and its a great player. However I am having problems with vista ultimate 64 bit edition, it seems everytime I connect my player it stalls the player (it locks on the dock screen) meaning I cant access files on the player. I have the lates creative media source , play for sure plugins and the latest firmware (it dident stall before I put the latest firmware on)
    THe player docks fine on my spare Windows XP machine, but it would be nice to have it dock with my primary machine which is sadly vista :P lol
    Any advice/comments ?
    Thanks

    here try this, work for melink

  • Creative Zen Vision M Display Problems

    I purchased a Creative Zen Vision M MP3 player around 2-3 years ago and it's been great so far. I've even bought most of the accessories for it!
    I switched it on today and found that there was a problem with the display - it's gone taint and there are stripey lines across it. Any idea what this might be?
    I've tried to reset it and plugged it into the television through the AV function and it displays just fine on the television.
    I've sent off an e-mail to Creative but just wondered if anyone has experienced something similar? And if so, how did you get it working again?
    Many thanks,
    Dan

    thedanholt wrote:
    I purchased a Creative Zen Vision M MP3 player around 2-3 years ago and it's been great so far. I've even bought most of the accessories for it!
    I switched it on today and found that there was a problem with the display - it's gone taint and there are stripey lines across it. Any idea what this might be?
    I've tried to reset it and plugged it into the television through the AV function and it displays just fine on the television.
    I've sent off an e-mail to Creative but just wondered if anyone has experienced something similar? And if so, how did you get it working again?
    Many thanks,
    Dan
    Replace the screen that is a hardware problem. http://cgi.ebay.com/ws/eBayISAPI.dll...n%3D4%26ps%3D0? Here is a source to purchase a new one? http://www.youtube.com/watch?v=_Drkr...e=channel_page? & a video to dismantle the player.

  • Creative Zen Vision: M Software problems, player not detec

    <SPAN class=postbody>hi, i just got a creative zen vision: m a couple of days back and i've had problems with it being detected by my computer. i've installed the software but when i connect the player to my pc, it shows up for about a second then it's not detected anymore. i brought it back to the store for them to check and it works on their lap-top. any ideas?Message Edited by wongkenji on 08-06-2006 08:26 PM

    wongkenji wrote:
    hmm.. something just struck my mind, do you think my printers could be affecting it's i'll go back and try later, hopefully it'll work. otherwise i have no idea lol.. thanks for the help!
    Hmm, your printer?
    I sort of doubt that...hmmm.
    Did you contact CS?

  • Creative Zen Vision W Sync Mana

    Hi everyone here!
    I have this zen vision W and whenever, i want to sync with my PC using the creative sync manager, it seems crashing on me. Any idea to resolve it's?
    Message Edited by xxhellinvaderxx on 0-28-2008 0:37 PM

    Yes & no It uses a library database from (by default) the My Music folder of your documents to build a music library. You add the files to the sycn list in the program or playlist & click sync. Has an options menu for you to set up. My advice is to use Manual for syncing not auto-sync.

  • Creative Zen Vision M firmware problems

    I have a brand new zen vision M that has some firmware issues. it essentially has no firmware on it, and when i connect it to the computer it only has 50mb of space. I'm running windows XP service pack 2

    How did you roll it back? Did you confirm it to be WMP0 & nit WMP 9 after rollback http://forums.creative.com/t5/MP3-Pl...dows/td-p/3697

  • Creative zen : vision M 30gb strange problem

    ,Creative zen : vision M 30gb strange problem. Hi people,
    My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
    Afther a few ours of ?assembling it was ready for charging a thought..
    I used the usb charger and de sync adapter...
    the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
    Also my PC does noet see my MP3
    tested on :
    windows xp service pack 3?
    vista?
    windows 7?
    please help me
    Stijn van Vilsteren?
    DUTCH?
    i am sorry for my pore english !

    Squipy wrote:
    Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
    My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
    Thanks in advance!
    The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

  • Creative Zen Vision:M Problen, PLEASE HELP

    I have had my Creative Zen Vision:M for a little over a year now. I has remained my favorite MP3 player by far in comparision to the rest of the competition. The problem I am having is that recently I went to transfer some music onto it after I hadn't done it in a while. I opened up the Creative Zen Vision:M Explorer, and to my dismay it said that the player was not connected. I have tried multiple reconnections with the wire, startup/shutdown many times even uninstalled and reinstalled the software but it always remains having the transfer files etc options faded out regardless of the player being connected or not. The Device manager has it listed without the yellow exclamation point so I know it is recognized by the computer but I am at a total loss for what to do now. Also, I have tried system restore to a time where it was working properly but to no avail it's the same thing. Any advice will be appreciated.

    well im not really scared. but it won't wpork anymore. like everytime i turn it off reset it or reboot it. it would just show the recovery mode and nothign else. that worries me ebcause i can't get it to work as normal agains. =[ so yea. maybe the filmwire thingy would work.

  • Firmware Problem Creative Zen Vision : M 30

    Hello
    I switched my Creative Zen Vision : M 30gb on today to find a firmware problem screen.
    I tried to dock it with my PC but it was not working.
    Tried using the reset button but it doesnt work
    Tried going into recovery mode to reload the firmware but when i try to put the update on its says my player is not connected.
    I tried using the MP3 recovry tool which recognizes my player but then when it tries to install the firmware it says it is not connected.
    The firmware it is trying to put on says it for the 60gb model, would this stop it from reconizing my player?
    It says it for a DVP-HD0004 but on the back of mine it says it is a DVP-HD0003
    Could anyone find the right software because i cant find it's
    Michael

    The first step is to do a cleanup >reboot on the player if that don't work? then while connected uninstall thru Device Manager,reboot computer then plugin to have Windows find & reinstall the player, if that? doesn't work then format,cleanup>reboot player to see if that solves the problem. loosing files is a last resort . Whatever you do DO NOT choose RELOAD FIRMWARE as you don't have recognition from the computer & can not reload it. RELOAD firmware ERASES the firmware making the player useless until it can be reloaded. Link for resue/recovery access on player? http://forums.creative.com/creativel...ap&thread.id=3

  • Buying a creative ZEn Vision M Please help !

    Hi there
    I am debating on buying a creative zen Vision M after two years of i pod problems. My issue is can u convert the music from the i tunes libary to the player? or will u lose all that music
    Thanks

    --- If you have purchased the music from the iTunes Music Store, you will not be able to use the music on the player - iTMS music is iPod only.
    There is a workaround (but it might not be legal, if you like to stay that way) - burn the music to a CD, then re-rip it in MP3 format using your favourite ripper. (iTunes will rip to MP3 - the option is under the 'Importing' tab on 'Advanced'.)
    --- If your music is in AAC format, you can use a converter to change them into MP3. Be advised that this causes a major loss in quality - and if you own the CDs, you'll be better to re-rip them from scratch to ensure that they sound good.
    You can do this conversion in iTunes - simply make sure that the format in the Advanced/Importing settings is set to MP3 (92kbps is fine for conversion). You can open the Settings window by clicking 'Preferences' in the Edit menu.
    --- If your music is in MP3 format, you don't have to do anything! The ZV:M will play it nati'vely.Message Edited by Lokiz0r on 07--2006 09:8 AM

  • Creative Zen: Vision M... Faulty Wires? My player is pretty broken! Please He

    Hello and thank you for reading this post!?My player,Creative Zen: Vision M... (which i have not dropped much and when i did it was only on to a couch or a bed) has been playing up over the last few months, it started out with when i push down on the headphone jack when it's inside the player, it freezes. the problem has gradually got worse, where now if i even lightly touch anywhere on the right hand side of the player (when looking at the front, where the screen is) the whole thing freezes, this can even occur when im not touching it... just through the weight of the player itself.. it also happens when im turning it on and of so sometimes it can be accidently left on for hours, frozen. The only way i can listen to music or do anything with it is if i put my finger nails underneath the play/pause button and lift it up really high. I would?appreciate any advice or help?anyone?could give me. Thanks.

    There are a multitude of problems that could be causing your player to exhibit this behavior in addition to battery failure, including the failure of the main logic board. If the player has been dropped a few times, exposed to excessi've heat, or high humidity/water, the problem might not be the battery. On the other hand, if the battery has been allowed to fully exhaust on a regular basis and left uncharged for long periods, it is possible that the battery could be dead, but LIon batteries usually last at least 2-3 years with regular use and normal recharging practices if they haven't been abused.

  • Creative Zen Vision M:30Gb freeze problem skipping between tracks

    Hi guys,
    I bought my Zen Vision M:30GB 2 years ago. It was a regenerated model by Creative.
    I'm fully satisfied of this product, i think the best of his category, but It has this problem since two years...Sometimes when i skip between mp3s (especially in random mode) it freezes and remains on the screen of current mp3, blocked...even I try to touch all buttons it doesn't unblock and i have to reset with a clip in the reset hole.
    I've noticed that this problem comes especially when i use random mode of entire library (about 4000 songs) or however with a long playlist...it doesn't happen when i listen a single album (about 20 mp3s in playlist)
    Sincerely i'm a little bored ...
    I tried to do some clean and format up by the system menu, but the problem persists...
    I've also thinked the problem could be because there are in library mp3 with variant bitrate...or a physical problem (I hope not)
    What do you think of?
    Thanks for help!

    Squipy wrote:
    Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
    My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
    Thanks in advance!
    The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

  • Zen Vision 30GB Firmware Problem - No solution wo

    I have a Zen Vision 30GB (not a Zen Vision M or W, just a Zen Vision). On Friday I was trying to add songs to my Zen and halfway through adding the songs I got an error on the computer saying "player not connected". So I undocked the player, turned it off and reset my computer. Saturday morning I turned on my Zen to try to add songs again and I got the error message on my Zen?"Firmware Problem" and it put me in "Recovery Mode". The first thing I did was try to reload the firmware, but when I plugged the Zen to the computer it says "docked", but I cannot move through the menu. When I unhook it from the computer I can move through the menu. BTW I am running Windows Vista 32-bit. I have uninstalled the Zen software and installed the software off the Creative website for Vista, but when I try to run the firmware it says "Player not connected, please connect player."? When I plug the player in via USB my computer recognizes it and prompts me if I want to sync my player, so there isn't anything wrong with my USB connection. The?Device Manager recognizes it however Windows Media Player does not. I get the same error message when I try to do the Recovery Tool on the Creative website. I have looked for solutions on the forums and just doing Google searches, but I have not been able to get anything to work. Please help me!? The player is less than a year old. I have never had any problems with it before, never been dropped or anything like that, so i am not sure what is going on. Any help or suggestions would be great!? I sent an email to customer support yesterday and the reply I received this morning was no help. First they thought I had the Zen Vision M, even though I specifically said I had the Zen Vision and gave them the serial number and everything. I sent them back a message today and hopefully they can help, but it is frustrating having to send an email and wait around for a reply.

    Re: Zen Vision 30GB Firmware Problem - No solution works\ I recently had this problem with a player i got off Ebay. What I did was format>cleanup>reboot the device thru the recovery screen on the the player. Problem solved . Be advised this will erase all the files (music ect.) http://forums.creative.com/creativel...ap&thread.id=3
    Dragonboy wrote:
    I seem to have a very similar problem as you. I have a zen vision m (30g) and i also use vista. I am getting the message "firmware problem" after is tries to "rebuild". I need some major help. I ended up giving up a while ago and bought a microsoft zune. It is not as good and i miss my zen. If anyone can give me some info it would be much appreciated.

  • Creative Zen Vision: M 30 gb - DRM information corrupt or missing.....???????

    So I just started having this problem yesterday but it seem I'm the only ever to have it. I've scanned every page I can and can't find a solution. Yesterday I started playing my music then all of the sudden it stopped. Granted I was having problems before even though I just got this unit a month..........! I sent an email and still haven't received a response.
    Here's the problem. While listening to my music yesterday I encountered a message saying - Playback Error. This error persisted after changing the track. After going home and reformatting, reinstalling firmware, downgrading -> upgrading firmware, reformatting over and over and over again, disk clean up, system restore, reboots, default restore, reformatting, again reformatting, deleting every piece of information I could delete...... you might be getting the picture so far.... After doing all of this I was unable to download tracks again onto my MP3 player. The only ones I can upload are unprotected content. I got thinking maybe there is a problem in my DRM file..... Where is my DRM file on the MP3 player and how do I delete it's You can't. At least not what I found. So again I tried everything over and over again and nothing works. I'm at my wits end trying to figure this out. I have a 30gb Creative Zen Vision: M player, Windows XP/Vista 64, Napster ToGo and now I can't use my MP3. This unit is a month old and I cannot use it. PLEASE HELP ME. This is very long winded but I'm hoping this will help a little. Thanks in advance, I'm going insane without my music.

    Well I have never used a service like that. That's all I can think of off hand.

  • Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

    I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Maybe you are looking for

  • Depot sales return to vendor process

    Hi Gurus, Our client is importing material and directly selling to the end customer. I have configured Depot sales scenario and its working fine. Now my client want to return material from the customer to vendor. Could you please provide me the custo

  • Linking to external topics

    Hi - I'm hoping someone can advise me on this: I have three WebHelp projects. I would like the user to be able to open one project and then click a link to the starting topic of one of the other projects. That topic and project would then replace the

  • How to connect to airport extreme

    How do I connect to my airport extreme? I need to add a second router to extend the range.

  • Grid Control cannot determine primary host architecture

    Dear all i try to create new standby database for my oracle rac database (2 node) in grid control 10.2.0.2 but after first step of wizard i get this error without any oraerr number : "cannot determine primary host architecture" , but i have all datab

  • Adding a 2nd SharePoint 2013 Farm to the domain

    hello. in my production domain environment i have a SharePoint farm consisting on a single SQL server and a SharePoint server, sadly this has a few underlying issues, so in isolation i have built a new FARM and now want to migrate it into the product