Creator 3D failure on ultra1 after upgrade to prom

Hi, has anyone had a problem using boot prom 3.11 on an ultra1 200, after flashing the prom my system reports an fcode error fff72000 with the creator 3D card installed. The creator card worked fine before the flash, so I don't suspect the card. Should I go to 3.25 or 3.33, or go back to an earlier version (and run 32 bit)?

Hello Derek,
have you browsed Sunsolve regarding this error message ?
Updating to a more recent OBP might be a good idea. There have been reports on problems with OBP 3.33. Please review the following thread before upgrading to 3.33.
Upgraded OBP on Ultra 1 - now can't boot
http://supportforum.sun.com/hardware/index.php?t=msg&goto=4146&rid=23&SQ=336d87c6b641ec86c047a92758b476bb
Michael

Similar Messages

Plug-in failure in safari after upgrading to lion

after upgrading to lion, seems like there is a plug-in issue - not sure if it's in safari or quicktime (i think the former). any idea on how to fix so you can view quicktime videos on web? already tried to reload latest (version 11) adobe flash without success.

This problem just hit me.
I have just spent 3 hours trying every combo of Flash and Java install/uninstall in order to get video on Safari on MBPr with ML. There are various posts on this issues going back thought several OSs.
Flash 10.3 can make it work on Firefox, but that is likely to be a security hazard, acccording to Apple, so was not ideal. I tried everything that I could find on line.
Nothing would make Safari function... then I hit on a simple solution. I keep a clone of my HDD via Carbon Copy Cloner (although Time Machine should work too). I trashed all the /Library/Internet Plugins, and replaced them with those from the clone, which was a couple of days old. I repaired permissions (there were quite a few to do from this), but then... back to normal.
Good luck!

Failure to launch after upgrade to 34.0.5

Did the auto upgrade to 34.0.5. Couldn't launch Firefox. Reinstalled to new folder and the product launched. When I closed Firefox and tried to launch from desktop it would not launch. Completely removed Firefox. Reinstalled and still have the same problem. Ran Norton Scan and no issues. Am at the end of my rope. When I look at Task Manager after trying to launch I see firefox.exe *32 but shows no CPU time. Each time I tri the *32 issue appears in Task Manager. I end the tasks and try again with the same results. Any suggestions. I had posted a similar issue a few hours ago and I thought it was resolved when I reinstalled Firefox but then I closed it and the problem is back,.

I once had an issue. After an update, Firefox had no access to the web at all.
But other programs were working fine. I started doing the normal diagnostic
things. No joy. So I thru everything. I finally discovered the problem. Somehow,
during the update, my proxy setting was changed from No Proxy. After I
changed it back, FF was back on the web.

Kerberos Authentication Failure for POP3 After Upgrading to 10.6.5

So I just upgraded from 10.6.4 to 10.6.5 and now Kerberos authentication for POP3 from Mail fails. Kerberos authentication for SMTP outgoing mail is just fine, it's only POP3 incoming mail that fails to authenticate. POP3 Kerberos authentication still works fine for the same account from another machine running 10.5.8. The mailaccess.log file contains the following:
Nov 23 15:36:59 server master[423]: about to exec /usr/bin/cyrus/bin/pop3d
Nov 23 15:36:59 server pop3[423]: executed
Nov 23 15:37:00 server pop3[423]: accepted connection
Nov 23 15:37:00 server pop3[423]: Major Error (1): A token was invalid (gssaccept_seccontext)
Nov 23 15:37:01 server pop3[423]: Minor Error (1): Token header is malformed or corrupt (gssaccept_seccontext)
Nov 23 15:37:01 server pop3[423]: Major Error (1): A token was invalid (gssaccept_seccontext)
Nov 23 15:37:01 server pop3[423]: Minor Error (1): Token header is malformed or corrupt (gssaccept_seccontext)
Nov 23 15:37:04 server pop3[423]: badlogin: FQDN [192.168.0.4] GSSAPI
Nov 23 15:37:04 server master[52]: process 423 exited, status 0
The server is running Mac OS X Server 10.4.11 and cannot be upgraded any further than as it is ancient hardware.
Any thoughts?
Cheers,
Derek

Makes perfect sense to me that ending one session by logging out enables him to begin a new session by logging back in. I give the young man credit for figuring out how to get around this deficiency in Parental Controls, as, deep down, I'm sure you do, too.
If you can't trust him to stick to his agreed upon half an hour a day, you can always (threaten to) lock him out of the computer for 23.5 hrs/day using the Bedtime settings. ; )

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.

Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

Safari Plug-In Failure after upgrading Flash Player

I've got OS X 10.9.2, Maverick, running on my iMac, and Safari 7.0.3.
Today I upgraded Flash Player to 13.0.0.182 version.
After upgrading I starting receiving the error message "Plug-in Failure" in every page I opened with video broadcasting, such as Youtube for instances, and no videos would be displayed anymore.
I already reinstalled Flash Player, rebooted my machine, have all plug-ins enabled in Safari Preferences, but no success whatsoever.
Think the solution could be downgrading to the early version of Flash Player, but have no idea how to do that now, since the Adobe site only allows me to UPgrade and not DOWNgrade.
Could anyone help me with this?
Many Thanks...

From the menu bar, select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

[Solved] Boot failure after upgrade to udev 0.84

After upgrading my system it no longer boot properly.
The kernel boots fine. Initrd executes and the normal init starts.
First of is the start of udev. This starts and immediately complains that nss_ldap is unable to contact the ldap server. Not very strange when networking isn't started yet.
After a little while and a few repetitions of the nss_ldap error message udev says its done.
After this activating swap fails but mounting Root readonly succeds. After this init proceeds with "Checking file system". This fails miserably saying "no such file or directory /dev/sda3" which is the previously mounted root filesystem.
It seems like udev gets busy when not able to connect to the ldap server and hence doesn't create the device nodes for my harddrive in time.
Because the check of the filesystem fails i end up on a rescue prompt. And when logging in to that and check /dev the sda* nodes are there.
Does anyone have a clue on how udev depends on nss_ldap? Any other thought on whats going on?

Ok, after some investigation it turns out that it seems like udev starts a few /sbin/vol_id on the disks/partitions attached. These processes in turn triggered nss_ldap which couldnt connect to the remote ldap server due to network not being up.
I have a less than beautiful solution to the problem. Altering nss_ldap to do soft binds instead of the default that is hard binding. When using hard bind and connect fails it uses an exponential backoff and tries again a little later. Changing to soft bind makes nss_ldap returning immediately when failing.
To change this edit /etc/nss_ldap.conf and change the line saying something like
#bind_policy hard
to
bind_policy soft
This at least helped me getting a system that boots again.

Logon failure after upgrade Windows 2003 domain functional level and schema

Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!

OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM

Visual voicemail failure after upgrading to ios 7

I see MANY people having trouble with visual voicemail failing after upgrading to iOS 7. It appears across many carriers. In my case, my wife and I have the same phone model and carrier. I upgraded to iOS7 and VVM stopped working. My wife did not and hers still works. VVM is a nice feature so I don't have to manual call and do the keypad stuff. It is also nice that I get the visual indication when there is a new VM.
After trying a few things from various forums, I stopped by the ocal Apple Store and got help at the Genius Bar. We tried a number more things without success - hardware diagnostics, various resets, changed VM password, etc. The next step was to do a Reset->Erase all content and settings. However, it so happened another customer was in with the same issue being helped by another tech. This customer was on a different carrier. So I left with the agreement from my tech he would contact me with the results so I did not needlessly wipe my phone. Have not heard back.
This seems pretty clearly an iOS 7 issue. I wonder if anyone has gotten a clear answer on whether this is a known defect being worked.
Thanks

If you have performed all of those troubleshooting steps, I would next call the carrier and ask them to reset your voicemail and reset your password. This should take care of it on the phone.

Trackpad failure after upgrading to X

After upgrading my 13" macpro, the trackpad would randomly fail when I was doing commands like switching desktops, mission control, or dashboard. Not always, but randomly, like it was going fine, but after I woke it up from sleep, it just didn't work out. Other trackpad gestures in a single desktop were fine however.

You and me both. No trouble with a trackpad after three plus years with Leopard, Snow Leopard, and Lion. Mountain Lion breaks my trackpad to the point where I can only hold the power button and press enter to shutdown. I cannot select or click anything with the left or right side of the trackpad. Neither the "tap tp click" nor the "full physical push works with either on my mid-2009 Macbook Pro, aka MacBookPro5,2. Happens after every wake from sleep.
Frustrating and disappointing. Is there a KB article regarding this? It happened immediately after the Mountain Lion upgrade and was not expereienced before.
Ran repair permissions after upgrade. Advice? SMC (PRAM) reset?
Thanks,
fellow

Airport Card failure after upgrade to OSX 10.5.6

My airport suddenly down after upgrade to OSX 10.5.6.
It showing "airport card not installed". I work very well in the past 8 moths before upgarde
Any one has same problem ? How can I re-install the Airport card (DIY)
Great thanks
My Macbook is late 2007 with 2.2G (4GB ram)

Hi,
Look at this link http://www.macfixit.com/article.php?story=2005093011343164
Rgrds

Synchronization failure after upgrade to Desktop Software v.7.0

When trying to synchronize with Outlook after upgrade to Desktop Software v.7.0 got a message "CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string". The other options like device backup, synchronization of images and videos, file transfer, work fine. I am on BB Bold9700 (v.6.0, 2949) and Sony Vaio with Windows 7. The direction of synchronization does not matter and the same error pops up when e.g. only Tasks are attempted to synchronize.  There were no problems with Desktop Software v.6.

Hello again.
I have a few ideas...including the registry cleansing that you did not do, along with the other things in that thread that you may have skipped over.
In addition, hHere is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

Creator 3D failure on ultra1 after upgrade to prom

Similar Messages

Maybe you are looking for