Credential manager question.

Hi folks,
How can I assign a credential manager to a service from command line? Is it possible? Or, is there some configuration files where it can be specified?
Thanks in advance,
Bala

Hi,
>>enable “Network access: Do not allow storage of passwords and credentials for network authentication”.
This security setting determines whether Credential Manager saves passwords and credentials for later use when it gains domain authentication.
It is a recommended practice to disable the ability of the Windows operating system to cache credentials on any computer where credentials are not needed. Evaluate our servers
and workstations to determine the requirements. Cached credentials are designed primarily to be used on laptops that require domain credentials when disconnected from the domain.
Regarding this setting, the following article can be referred to for more information.
Network access: Do not allow storage of passwords and credentials for network authentication
http://technet.microsoft.com/en-us/library/jj852185(v=ws.10).aspx
Best regards,
Frank Shen

Similar Messages

  • Credential manager to see credentials stored for all users?

    Is there a way to see and manage credentials stored for all users on a server (we use 2008 R2) rather than just the user who logs on and uses credential manager (or the cmdkey command)? We have users using three terminal servers and some of them store
    incorrect creds (wrong username or password), so would be good for myself as domain admin, if I could go to the servers myself, and remove any credentials that OTHER users have stored.

    Hi
    The cached credential are stored in a special location in the registry. (an example there;
    http://msitpros.com/?p=1029)
    I doubt you can manipulate the string directly as it's encrypted (possibly "salted" with the user token), but maybe their is some workaround that I don't know of. (edited; to erase it's surelly easily doable)
    Regards, Philippe
    Don't forget to mark as answer or vote as
    helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • Disable creation of VPN "*Session" credential in Credential Manager without disabling all of Credential Manager?

    Is there a way to disable creation of the VPN "*Session" credential in Credential Manager without disabling all of Credential Manager?
    I know that you can disallow storing all domain creds in Credential Manager by setting the following registry entry to 1 (but this doesn't fix my issue):
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
    Value Name: DisableDomainCreds
    Value Type: REG_DWORD
    Value: 1
    On my Windows 8 Enterprise workstation, I use mapped drives with one domain account and Outlook with a different domain account. Using the fix above fixes my issue with mapped drives (after sleep mode, reconnect to VPN and my mapped drives won't reconnect until
    I delete the '*Session' credential) but then I cannot use Outlook at all.  Note: I do not log on to Windows 8 with either of the domain
    accounts mentioned above (I use a local admin account) and I do not 'save my password' in Outlook.

    I should clarify my question: Is there a way to disable creation of the VPN "*Session" credential in Credential Manager
    without disabling all domain creds in Credential Manager?
    On my Windows 8 Enterprise workstation, I use mapped drives with one domain account and Outlook with a different domain account.
    Normally I can use Outlook if I am connected to the vpn and I can use it if I am not connected to the vpn.
    Normally I can use the mapped drives if I am connected to the vpn and I I can use the mapped drives if I am not connected to the vpn.
    The vpn is essential for me to do my work for reasons other than the mapped drives and the usage of Outlook, but I need to be able to use the mapped drives and Outlook whether I am connected to the vpn or not.
    Let's say my two domain accounts are these: drive-account and outlook-account.  I must use the outlook-account for the connection to the vpn.  When I connect to the vpn, it creates the '*Session' credential in the Credential Manager for outlook-account,
    the mapped drives disconnect and they will not reconnect until I delete the newly created '*Session' credential.  The error is 'An error occurred while reconnecting <drive letter1:> to <\\network\path>  Microsoft Windows Network: The
    local device name is already in use.  This connection has not been restored.'  Further evidence that it is the '*Session' credential causing the failure to reconnect is that I have two mapped drives and if I disconnect one of them and try to reconnect
    the other one, I get a different error, 'An error occurred while reconnecting <drive letter2:> to <\\network\path2> Microsoft Windows Network: Multiple connections to a server or shared resource by the same user, using more than one user name,
    are not allowed. Disconnect all previous connections to the server or shared resource and try again.  This connection has not been restored.'  Manually recreating that first connection then allows me to get back into both, but I should not have to
    manually delete and recreate a mapped drive every time my computer goes to sleep.  At least the manual deletion of the '*Session' credential is slightly less intrusive, but I'd still appreciate if there is a way to disable the creation of the '*Session'
    credential without disabling all domain creds in Credential Manager.  As I have said, if I disable domain creds using the registry fix some have suggested, I do not get the drive errors (after sleep mode and reconnecting to vpn), but I cannot use Outlook
    at all.
    Note: I do not log on to Windows 8 with either of the domain accounts mentioned above (I use a local admin account) and I do not 'save my password' in Outlook.

  • Outlook Password Stored in Credential Manager

    Hi all,
    What is the reason behind outlook password getting stored in Credential Manager?
    Most of the domain account gets locked due to the same reason.
    I have to remove it every time using the following command
    rundll32.exe keymgr.dll, KRShowKeyMgr
    Please update.
    Regards, Hemanth
    The Trusted Admin

    Hi all,
    What is the reason behind outlook password getting stored in Credential Manager?
    Most of the domain account gets locked due to the same reason.
    I have to remove it every time using the following command
    rundll32.exe keymgr.dll, KRShowKeyMgr
    Please update.
    Regards, Hemanth
    The Trusted Admin
    That would be question for the Outlook or client forums I would think 
    You can disable the credentials manager with a GPO or by uninstalling/disabling it
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Project Management Question - timelines for Production system deployment

    Hi
    I need an expert advice on setting up timelines for establishing an Oracle Apps Production environment. We are implementing Oracle HR & Payroll at an organization.
    Our system architecture is a 2-node application tier and 2-node DB tier (RAC). RAC is configured by another party and we only have to prepare the application tier (2 nodes)
    We would be installing Oracle Apps R11i (11.5.10) with jserv load balancing on the 2-nodes
    Can anyone suggest how much time this should take to install/configure & patching of the application tier (on 2 nodes)?
    Regards
    Saira

    Duplicate post (check your other thread):
    Project Management Question - timelines for Production system deployment
    Re: Project Management Question - timelines for Production system deployment

  • How can I stop credential manager single sign on prompting me for a password for every untrusted connection?

    How can I set defaults for credential manager? I keep having to close a dialogue box prompting me for my credentials for untrusted sites, when I don't have passwords for these sites. I click 'close' and it disappears, but it slows things down.

    Hi mikehoft,
    Welcome to the Apple Support Communities!
    I understand that you are receiving repeated prompts to sign in with your account when you open iTunes on your Windows computer. It sounds like to me, because you mention Automatic Downloads, that you are being prompted to authorize your account. If this is the case, I would recommend working through all of the troubleshooting, in order, in the attached article to resolve this issue. 
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
    Best regards,
    Joe

  • Command line for credential manager

    can anyone help me in getting command line for credential manager ... ?
    Thanks,
    VRAGHU

    If there are a lot of them you could go to a command prompt and type:
    cmdkey /list
    Or better yet:  cmdkey /list > del_creds.cmd
    Then edit the file so you are only left with, for example:
        cmdkey /delete:info-services.dev-inside.lni.wa.gov
        cmdkey /delete:info-services.inside.lni.wa.gov
        cmdkey /delete:inside.lni.wa.gov
        cmdkey /delete:lnidaptumtfs08.wads.res
        cmdkey /delete:lniduttumvm05
        cmdkey /delete:lnipstum01.wads.res
        cmdkey /delete:lnipstum02.wads.res
        cmdkey /delete:lnixapolysrm1.wads.res
        cmdkey /delete:ohr.apps-inside.lni.wa.gov
        cmdkey /delete:portal.apps-inside.lni.wa.gov
        cmdkey /delete:portal.dev-inside.lni.wa.gov
        cmdkey /delete:scsd8.unit-test.wads.wa.gov
    then run your del_creds.cmd file and they will all be gone.
    Steven Shippee

  • Windows credential manager password decoder

    For your sake, I hope someone can prove me wrong.

    Is there a legit program that can decode passwords saved in the credential manager?
    The story is no one wrote down the password for our customer service email, and I had to delete someone's profile and I now have to attach the account back on.  The password is still saved in the person's credential manager, sucks that I couldn't copy and paste out of it.
    My only other option I can think of is to just reset the password, but then that means updating everyone else's credentials
    fyi, I'm not the one who created and forgot to write the password down.
    This topic first appeared in the Spiceworks Community

  • Another color management question

    Hi folks,
    Apologies for yet another color management question, but Im getting very confused and could do with some help. I use a Canon 10D and Canon 30D. Ive come to LightRoom from Pixmantec Raw Shooter.
    As Ive gotten more serious about producing high quality images for both the web and as prints, I thought Id invest in the Colorvision Spyder2 calibration product. So my monitor is now calibrated (quite a difference from what I was seeing!) and I have a calibration profile applied.
    My needs are pretty obvious I want my images to look the same wherever theyre viewed including exported files (such as JPEGs) whether this be on my monitor (in LightRoom, a web browser, Paint Shop Pro, whatever) and on a printer.
    Perhaps Im getting confused because Im trying to compare what LightRoom does with what RawShooter does.
    In RawShooter, when exporting from RAW to JPEG, I can specify the RGB Working Space Im using and then select my monitor profile. I think that what happens is that the export mechanism takes this profile into account and, low and behold, the JPEG looks fine when viewed in any web browser - the colours are exactly the same as in RawShooter. In Paint Shop Pro they look fine too unless I enable Color Management in which case (Im guessing) the monitor profile is, essentially, applied twice! But the upshot is I seem to get the results I want.
    What I cant figure out is how I do this in LightRoom. I can make the same adjustments to the RAW image as I did in RawShooter, but there doesnt seem an option for me to select my profile on export to JPEG only the standard 3 color spaces. Anyway the result is a JPEG that looks somewhat different when viewed in a web browser, or Paint Shop Pro with Color Management turned off. However, if I turn Color Management on in Paint Shop Pro, then it looks fine. So Im assuming that my profile isnt accounted for when exporting JPEGs from LightRoom.
    So any pointers or explanations would be really appreciated. I also acknowledge that this is my first foray into color management, and feel free to tell me to go and read some introductory article (link please!) and then come back with a sensible question if thats whats needed!
    Thanks in advance.
    - Pete

    Lightroom color management.
    a.) Monitor profile used: The profile set as the default in your operating system (e.g. Windows xp). (your monitor profile software usually does this when you calibrate/profile your monitor).
    b.) Working space: ProPhotoRGB
    c.) Export color space: You can choose one of the following sRGB; Adobe RGB or Pro Photo RGB.
    There is no option (afaik) to change a.) or b.) the option you choose in c.) will affect how the exported image will be displayed in color managed applications or non-color managed applications.
    Non-color managed applications are not able to display Adobe RGB or Pro Photo RGB correctly. I guess if you wish a consistent display of your images in color managed and non-color managed applications then the only common factor is sRGB and you should export your images in sRGB color space.
    The benefits of the other expanded color spaces are in printing and you also would have to get this end of your color management correct. Printing profiles to match your printer and each paper being used etc.
    Until you can get this all sorted out you will get better results from sRGB, this is also applicable when using most commercial printing services.

  • Audit Management: Question List (questionnaire)

    Hello,
    There is a scenario where a questionnaire is required to be created at the time of 'Opportunity Creation' in order to perform some checks. This is required to be incorporated within the opportunity flow. example: <i>based on the asnwer in question the status of the opportunity would change.</i>
    In this context:
    <b>1.</b> In configuration <b>IMG --> CRM --> Audit Management --> Question List</b>, there is a option "Question List". Could that be used for this purpose ?. If 'Yes'  than Is it possible to use these questionnaire for other application then Audit Management ?
    <b>2.</b> Is there a option to create a questionnaire in SAP-CRM (sales) and assign it to the opportunity flow ? how this can be achieved?
    <b>3.</b> What can be the other approach options to achieve this functionality ?
    Thanks in advance
    /Manik

    Hi Manik,
    the question list you talking about is used for Audit management onyl.
    There is hierarchy
    Question list
    Question element
    questions
    Niranjan
    Award if useful

  • Unable to get credential manager version

    When I tried to start iFS ServerManager I got the message:
    Login to Oracle iFS Manager failed.
    IFS-10110:unable to construct directory service
    IFS-10140:Unable to instantiate credential manager Ifs
    IFS-10150:Unable to construct credential manager
    (oracle.ifs.server.IfsCredentialManager)
    IFS-10176:Unable to get credential manager version
    What is this about? tks!

    Were you upgrading from 1.0 to 1.1.
    If so please see the following post
    http://technet.oracle.com:89/ubb/Forum36/HTML/001000.html

  • All saved credentials get deleted from Credential Manager when changing password

    We have Windows 7 computers that are joined to domain. Credential Manager does its job but whenever users change their AD user password, it deletes all saved credentials. does anyone know why this is happening?

    This may casued by group policies?
    Check with your system admin and see if there are any task schedulers that make the password change a trigger to clean all the saved credentials.
    Normally it should just saved the changed information according to the special user account. Werid thing.
    Rgds

  • RDS 2012 and Credential Manager

    Hi,
    We have a customer with a RDS Cluster (Windows 2012) which consists of 4 RDS Session Servers.
    Some of the users are complaining that their passwords are not stored in Internet Explorer 10.
    we did some digging into this and found out that it's because of the fact that Credential Manager is storing the passwords locally on the RDS server the user currently is logged in to. when the user get's redirected to another RDS server the passwords are
    gone.
    Is there a workaround for this? or is there some way to change the Credential Manager store location? 

    Hi Pascal,
    Agree with words of “panagiotis” as no way to backup. There is way where you can save the credentials with user login script but for that also credential will not roam. You can check
    this thread for information.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Solution Manager question answers for certification

    Hi Experts,
    Please provide document link for solution manager question answers
    I am preparing for SAP MM Certification
    Thanks,
    Senthil

    Check this link [How to get SAP Certified in Solution Manager u2013 a Step by Step Guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d040b4f5-b837-2c10-0c8b-964ab985dcd3?quicklink=index&overridelayout=true]
    Check also this useful link
    http://www.sap-img.com/mm015.htm
    Edited by: Jeyakanthan A on Jun 18, 2010 10:20 AM

  • Difference between Control Panel Credential Manager and rundll32.exe keymgr.dll,KRShowKeyMgr

    Hello
    With keymgr.dll,KRShowKeyMgr I can find Lync certificates not showing in Control Panel  > Credential Manager. Is there a difference between the two? What would be the explanation for that?
    Thank you and regards,
    Alex

    Hi,
    They are the same settings.
    If you sign in your Windows 8.1 and Lync with the same account, it will not save the credential in Credential Manager.  
    Karen Hu
    TechNet Community Support

Maybe you are looking for

  • Multiple versions on one computer?

    Hi! I am a new Macbook user that I bought to start developing Mac software. I would like to use multiple versions of Mac OS X on my macbook if possible. Can this be done so that I would have 10.3, 10.4 and 10.5 of Mac OS X installed and select the ve

  • Entries made in Sprint BB 8330 will not sync to Outlook Calendar

    I just got a Sprint BB 8330 and have set up 2-way sync for Outlook Calendar, Tasks, Memos & Address Book. The 2-way sync works for Tasks, Memos and Address Book except the Outlook Calendar. The Outlook Calendar syncs to the BB but entries made on the

  • IMac boot issues, panic report since Yosemite upgrade

    I've been having serious issues getting my iMac to boot ever since upgrading to Yosemite - Basically it turns on, makes the chiming sound, goes to the white screen with the apple logo and progress bar and at about 1/3 of the way, goes blank white/bla

  • Icons for purchased apps are missing

    I bought this iPad 16GB from a friend. All apps that imahve purchased say installed no matter how I come at it. However there are several that did not install an icon you can tap on. And I don't know how to fins them or use them now.

  • Focus Lost when Dragging JInternalFrame?

    Hopefully this should be a simple question: I have a JInternalFrame with numerous simple components like JTextFields. When I click the title bar, or click and drag the Frame, the JTextField that had focus prior to that clicking loses focus. Focus goe