Credential Not working

hi ,
  My SharePoint portal application is asking for credential again and again .I am entering portal account and farm account but none of them are accepting .I am calling the application from share point server only .I have disabled loop back check .Added
the site to trusted zone but still no luck .
Did all steps in the following link 
http://www.sharepointdiary.com/2012/04/sharepoint-keeps-asking-for-password.html
But no luck .
Thanks
Bibin

Hi Bibin,
Were you prompted to authenticate 3 times and then the screen turns white but nothing is displayed when accessing the site?
If yes, please follow the steps in Anil’s suggestion or the link below to check if the LoopbackCheck is disabled correctly and remember to reboot the server after that.
http://blog.incworx.com/blog/sharepoint-2010-tips-and-tricks/prompted-to-login-3-times-and-then-get-a-white-screen-with-sharepoint-2010
Please also check the ULS log to see if there are anything unexpected occurred.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Credential Mapping Mapping not working

    "Please tell where I am wrong in configuring and calling credential mapper???
    I wanted to achieve single sign on using in-built Credential mapping feature of weblogic server.
    I thought of getting connected to pointbase which can act as Enterprise Information System(EIS).
    I did following steps.
    Configuration Phase
    1 I made Examples as user and Examples as password in pointbase which will act as my EIS.
    2 I wrote and deploy one connector class for connecting to pointbase.
    3 I configured Admin as user and Admin as password in my configured security realm which will act as Weblogic User.
    4 I did credential mapping in the connector class for mapping my Weblogic (Admin) user to EIS(Examples) user.
    Calling Phase
    1 I deployed one application to call pointbase server using the connector class.
    2 I try to get connection to pointbase server using following code
    getConnection("Admin","Admin");
    Where Admin user is my weblogic user mapped to Examples user of point base server whose mapping is done in the connector.
    I hope it to work for getting the connection.But it didn't work.
    whearas when i try to get connection using
    getConnection("Examples","Examples");
    which is my pointbase user.It works.
    So,I can assume it is not working for mapped user for credential provider.
    I don't know where I am

    Mario
    There is a bug with this, but in SP10 and SP11 - I found out the hardware and impleneted some didgy fixes from SAP that broke more than they fixed...
    What's the error you were getting?  Were both paths evaluated?
    These are the two OSS Notes I know of:
    Note 1061202 - Function "if" evaluates both branches
    https://service.sap.com/sap/support/notes/1061202
    Note 1053706 - Function "if" produces wrong result in Message-Mapping
    https://service.sap.com/sap/support/notes/1053706

  • Managed Attachments - I/PM is not working when called from EBS

    Hi.
    When we click on "Managed Attachments" I/PM login screen should be populated. It was working fine before... Today, it is not working as expected. The following exception is coming in I/PM console logs...
    *<Dec 18, 2011 5:00:23 PM GMT+04:00> <Error> <oracle.wsm.policymanager.bean.util.PolicySetBuilder> <BEA-000000> <The policy referenced by URI "oracle/wss_username_token_ service_policy" could not be retrieved since Policy Manager is not deployed. oracle.wsm.policymanager.PolicyManagerException: WSM-02054 : Failure in looking up EJB component DocumentManager#oracle.wsm.policymanager.bean.ejb.IRemoteDocumentManager.*
    Caused By: javax.naming.NameNotFoundException: While trying to lookup 'DocumentManager#oracle.wsm.policymanager.bean.ejb.IRemoteDocumentManager' didn't find subcontext 'DocumentManager#oracle'. Resolved ''; remaining name 'DocumentManager#oracle/wsm/policymanager/bean/ejb/IRemoteDocumentManager'
    I think its the problem with Security Providers... We are using the default only... not using any LDAP etc... when we check in Enterprise Manager it is showing the store type as FILE for "Policy Store", "Credential Store", and "Key Store"....
    The same exception is coming when we test the webservices under Imaging deployment in Weblogic Console...
    Not sure how to crack it...
    Anybody please help!!

    The issue has been resolved by configuring Oracle Web Service Manager security policy as per the doucment 1332250.1
    Oracle Web Services Manager (OWSM) is necessary for applying WS-Security headers to UCM web services. The WebLogic domain that UCM/IPM runs in must have OWSM installed in order for this to work. OWSM can be selected upon domain creation, or added to a domain by extending the domain.

  • Web Content Source - Not Working

    Created a new web-content source & full crawled it.
    When i searched with content text, not working.

    Hi ,
    According to your description, my understanding is that it did not work when you searched a new web site content source in SharePoint 2013.
    Please check whether the web site allows anonymous access to its content. If not, we need to configure a rule for the URL which allows us to enter the credential to access the content of site
    More information, please refer to the link:
    http://mohitvash.wordpress.com/2012/03/07/configure-external-site-as-content-sources-in-sharepoint-search/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • IPad Mini 2 security feature is not working as claimed!

    I recently bought my iPad Mini2 (Retina Display – 64GB with T-Mobile service; Serial #DLXLPCE1FLMP) and less than 2 weeks of usage - it has been stolen on December 3, 2013 at airport.  I put my iPad Mini2 on “airplane” mode (no internet service) to save the life of the battery while on the plane and never turn it back on when landed...  I had my iPad Mini2 in my purse when landed in ATL… I picked up my luggage – walking and standing in the crowds…  When I got home, that’s when I realized my iPad Mini2 was no longer in the purse. 
    The next thing I tried to do was “Find My iPhone” option from my other Apple device (iPad2) to locate the missing iPad Mini2 but it’s showing as “offline”.  I then issued “Play Sound”, “Lost Mode” and “Erase iPad” from the “Find My iPhone” feature (see screenshot).  Since the device was offline, the “Erase iPad” function will not work until it’s online.  It was updated with the iOS 7
    I’ve been calling AppleCare Support and at the Apple Store (in person) for help of how ensure that my credential on that iPad Mini2 will not be stolen as well.  They ensured me that since I issued the “Lost Mode” and “Erase iPad”, no one can access to the device to turn off the “Airplane” mode in order to get the internet… not even through my 4-digit security code.  They were wrong! Somehow my device was security breach and that my iPad Mini2 was ERASED at 2:33 AM (Eastern Time) – meaning that whoever has my device had it disabled the “airplane” mode and had internet signal in order for the data to be erased (see screenshot).  I spoke to multiple representatives from Apple and they said that it shouldn’t happen…  I was on the phone for hours and no resolution as far as security goes.
    I’ve tried my best to recover the item but it looks like it belongs into a wrong hand.  I want Apple to replace my newly purchased  iPad Mini2 (Retina Display – 64GB with T-Mobile service) because the Security is not working as claimed…
    Very unhappy customer!!!

    Good luck with that.

  • Java script is not working in custom tabular form

    hai all,
    i have changed my built in tabular form to custom tabular form.my java script is coding working fine in built in tabular form . But in my custom tabular form java script is not working ,since it is created as standard report(Display As).
    pls help me.
    with thanks and regards
    sivakumar.G

    Is the appostrophe function test(pthis) *'* present in your javascript code...
    If not can you post the same in apex.oracle.com and give the credential so that I can the why its not wroking
    Regards,
    Shijesh

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

  • Cached credentials are not working on the lock screen (Windows 7)

    Hello all,
    We are having a difficult time trying to troubleshoot a problem with credential caching seemingly not working on the lock screen for our laptop users. Users are instructed to logon to the laptop while connected to the domain to cache their credentials. The
    user then leaves the network, and is able to log in to the laptop using cached credentials. The laptop locks either due to a manual lock, or due to an inactivity timer. The user tries to relog and is presented with the error “no logon servers available to
    service the request.” Users are reporting the problem from both home and public networks. We have been able to recreate the issue by logging on the laptop while in the office and setting our internal wireless network to manually connect, and then simply clicking
    start > shutdown arrow > lock. Many users have reported that they were able to get back into the laptop after a hard shut down, but would be unable to log in again if they returned to the lock screen. One user has reported that selecting other credentials
    > switch user > other user while on the lock screen and then entering in his DC credentials would allow him to get back into the laptop. I was unable to recreate this workaround on our test machine. I also tried to logon using the switch user account
    with the “.\username” method to see if that would look for cached credentials. One user has reported that he was unable to hard shut down the computer to get back in. He also reported that he tried to pull the battery and give it time before trying again.
    We have set the value for “Interactive logon: Number of previous logons to cache” to 50. The status of “Interactive Logon: Require Domain Controller to unlock workstation” is disabled. We have tried to turn the Wi-Fi switch off and then back on while on
    the lock screen. Error logs that we think are related to the problem include – Event ID:5719, NETLOGON and Event ID:4343, NlaSvc error 0x4C6 and error 0x51
    I have a slightly sinking feeling it has something to do with NLA thinking that they are connected to a domain while on the lock screen, but this is pure speculation. Thanks for reading my post and any potential solutions are greatly appreciated! 

    I'd try them over here.
    Windows IT Pro forums on TechNet
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Oracle 11g Express Edition not working

    Hi, I have installed Oracle 11g Express Edition correctly but when I try to log in :
    http://127.0.0.1:8080/htmldb
    I use SYSTEM and my password and it logs in but says: The requested URL /htmldb was not found on this server
    If I try to acced to :
    http://127.0.0.1:8080/apex
    the problem is that I cannot login either with SYS, SYSTEM, sys or system.
    Edit: I have windows 8.1

    Try ...:8080/apex/f?p=4950 for the URL with the system credential, that is the apex admin URL, and SYSTEM credential should work for that one.
    Most any other Apex URLs require an Apex login, which is not SYS, nor SYSTEM, those are database users, they aren't apex users.
    And if you get a "page not found" or similar error, check output of:
    lsnrctl status
    For Apex to work, both the database and the listener must be running, and there also must be a "...presentation=HTTP... port=8080" line showing up in the ...status output, in Endpoints... section.
    If that endpoint isn't there, apex won't work, something may not be quite correct with the network settings in listener.ora done by the installer.

  • OIM-OAM 11g BP 02 integration not working as expected

    Hi Experts,
    We have OIM 11g and OAM 11g both upgraded to BP02 installed on separate hosts. We are using OID 11g as the directory servers and OVD 11g fronting OID for integration. We followed the steps mentioned in Oracle Document Oracle® Fusion Middleware Integration Guide for Oracle Access Manager 11g Release 1 (11.1.1)Part Number E15740-04 for integration purpose.
    After performing all the integration tasks mentioned in the document, while testing the ingtegration, the expected results are not been serverd.
    If I access OIM admin console URL, am getting default OIM admin console URl instead of OAM SSO login page for authencation. and also I am unable to login using either xelsysadm\oimadmin\oamadmin but I can login using weblogic, so this is referin to the default embeded LDAP of weblogic for credential validation.
    OIM and OAM are deployed on separate hosts, please find the deployment details below.
    1. JDK: 1.6.0_29
    2. WLS : 10.3.5
    3. LDAP: Oracle Internet Directory: 11.1.1.5.0
    Oracle Virtual Directory: 11.1.1.2.0
    4. Webserver: Oracle HTTP Server fronting the OIM
    The Integration videa on Support.oracle assumes that all components OIM\OAM/OID/OHS being on the same host.
    I have my OIM and OAM both patched to the latest BP which is BP 02. There is a support article which specifically talks about few settings ton be made for BP 02.
    the article ID is 1447494.1.
    Even after doing all these, the integration is not working.
    As per the support article, I need to use preferred host name for agent fronting OIM as IAMSuiteAgent and if I do that, the proxying of OIM server with the webserver host will not work at all and ends with 404 not found error when I access using http://OHShost:OHSport/oim.
    but if i use the name of agent i.e webserver name in the preferred host field, the redirection would happen and i get OAM SSO login page for authentication, however with the credential validation at this page, the OIM login page (http://OIMhost:OIMport/oim) is provided prompting for login again.
    also if i access OIM login page http://OIMhost:OIMport/oim directly, the OAM SSO page is not coming for authentication.
    I am awaiting your advice\suggestions or workarounds if any one has come across this kind of issue, which i am sure is an obvious case.
    Thanks,
    Nagendra

    Hi,
    Any help in this regard please/
    Thanks
    Nagendra

  • Get-Member not working in ISE

    When i try to use Ge-member command in ISE it not work but it work without ISE ...?
    PS C:\> Get-WindowsFeature | Get-Member
    Get-WindowsFeature : The target of the specified cmdlet cannot be a Windows client-based operating system.
    At line:1 char:1
    + Get-WindowsFeature | Get-Member
    + ~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : DeviceError: (localhost:String) [Get-WindowsFeature], Exception
        + FullyQualifiedErrorId : WindowsClient_NotSupported,Microsoft.Windows.ServerManager.Commands.GetWindowsFeatureCommand

    when i try to access my core server from my domain using power shell i get error
    PS C:\> Enter-PSSession -ComputerName WIN-CORE -Credential 0SGMS\bhagwatritesh
    Enter-PSSession : Connecting to remote server WIN-CORE failed with the following error message : WinRM cannot process
    the request. The following error with errorcode 0x80090311 occurred while using Kerberos authentication: There are
    currently no logon servers available to service the logon request.
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or
    use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more
    information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + Enter-PSSession -ComputerName WIN-CORE -Credential 0SGMS\bhagwatritesh
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (WIN-CORE:String) [Enter-PSSession], PSRemotingTransportException
        + FullyQualifiedErrorId : CreateRemoteRunspaceFailed

  • Authentication and Debugging not working -- since Saturday, July 12

    Hi everyone,
    Since Saturday (July 12), the iTunes U launcher that my institution uses (a Moodle block) has ceased successfully authenticating users. From all the looking I've done, nothing has changed from our side, although I am having to do the investigation remotely, and can only be about 95% certain of that so far.
    I'm also not able to use the debug string to see what credentials are being sent to iTunes U, because there appears to be no difference in the launcher process, whether debugging is enabled or not.
    Is anyone aware of any changes or glitches in the system in the last few days? Any information at all will be very greatly appreciated.
    -JR

    Woolamaloo lives to help with such problems. Woolamaloo is an application specifically designed to access your iTunes U site without any CGI, BlackBoard or Moodle building blocks, etc. It accesses your site directly ... using any credential you supply. In effect, you can use it to "be" any user at your site. It can even show you Apple's debug webpage (if you want to see it). You can use Woolamaloo to verify that your site is not working ... or that it is and you have a local problem. You can find out and download the app here:
    http://itunes.uic.edu/Woolamaloo.html
    It comes in both a Windows and Mac OS version (though I admit to having a Mac OS X bias).

  • App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server

    App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.

    I had this problem myself.
    Checked the system log with Console, and I found the entry:-
    Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
    For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
    So, I tried "Copy & Paste"  - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
    Pasting into the System Keychain was, I found a not-very-intuitive process:
    Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
    Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
    From the Edit menu, select "Paste" or cmd+v.
    You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
    I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
    Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
    Exactly the opposite to what I'd expect..

  • HP ProtectTools password auto fill in does not work with Firefox 4

    My HP Compaq 6715b has a credential manager called ProtectTools that stores user name and password for favorite websites and auto fills the information when the website is opened up. This worked fine with Firefox 3.x.x but since I upgraded to Firefox 4 it is no longer "syncing". I have checked the program and I am "logged in" which is what is necessary to activate this program. I have tried logging off and then back on without any results. I have tried to go back to the 3.x.x version of Firefox and cannot do that either. Technical support for my computer no longer is available from HP due to it's age (2007). Does anyone know if Firefox 4 and ProtecTools is compatible? What do I need to do to get these two "communicating" again?

    I think I solved the problem. I have CCleaner software and had the clean cookies checked. After unchecking the box and restarting, the auto login works fine. So if anyone has a cleaner program or anti-virus program with clean cookies enabled, auto login for google or yahoo will not work.

  • SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

    Hi all
    I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
    and everything works except the "Connect via Console" function.
    When I try to connect to a VM I get the following message:
    Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
    provided do not have the necessary privilege to connect (0x0003, 0x0300)
    It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
    Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
    Thx
    J0fe

    Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
    I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
    As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
    the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
    I elected to use Credential Manager to resolve this issue.
    In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
    registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
    This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
    given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
    I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
    which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
    With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
    If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
    did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
    Cheers,
    Lain
    Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

Maybe you are looking for