Credential problem

Hi, I'm new with Itunes U and am still working on getting our site set up. We were able to log in with these credentials friday, but today it loggs us in as a general user. Any ideas?
credentials=Administrator@urn:mace:itunesu.com:sites:nhmccd.edu

If you attach the debugging suffix to your iTunes U request, what does the debugging page show?

Similar Messages

Outlook credential problem

We migrated our Exchange server from 2007 to 2013. My email worked fine for two months. Now I have a problem.
A couple times per day, my outlook 2013 prompts me for credentials.
In most cases, this problem is fixed automatically. Even I don’t enter the password, Outlook woks after it prompts for the credentials for a couple minutes.
It is not connectivity issue because all computers I try have the same problem. Also my emails on iPhone and OWA have the same problem.
I am only user have this problem.
I don’t have credential problem when I login the network.
When I see NEED PASSWORD warning on the right bottom, I don't need to enter the password. I double click on NEED PASSWORD, then Outlook works and change back to CONNECTED TO.
7. sometimes, I see this message and it tries to connect to
https://exchange.ourdomain.com/autodiscover/autodiscover.xml that is exchange 2007. the new exchange server should be mail.ourdomain.com.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi,
It’s abnormal that Outlook still tries to find the old autodiscover point.
This issue can occur if the old Exchange 2007 autodiscover SCP information is still present in AD. I suggest we firstly remove it via ADSIEDIT and see whether it works:
http://technet.microsoft.com/en-us/library/bb124251(v=exchg.150).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Facing Credential problem

Hi,
I facing the error when run interactive form application.
I know this is hapenning because of credential problem.
I can't request BASIS for this problem.
Some where it is checking the credential while calling the applications.
So i think we can avoid this error in debug by changing the variables.
Do you have any idea to do this?

Hi shivakri,
The ReaderRights credential is needed when ADS is rendering an interactive PDF form. The credential is used to apply the usage rights. There is no way of by-passing this for interactive forms. If you want to use them you need to install the ReaderRights credential as described in the config guide.
This has nothing to do with the licensing.
Regards,
Juergen

Host Credential Problem

I try restarting my 10g db. I have given the proper OS and DB credentials but the system still tells me that the host credentials are incorrect. I can't figure it out and it's driving me nuts.
Any insight as to how I can track down a fix?
Jim

hi,
were you able to save your problem. I am also trying providing host credential in OEM by providing OS user name & password of user which I used to login to machine where oracle is running but it says wrong username/password.
thanks in advance

SQL Server 2008 R2 Report Server Credential Problem

All
When our report viewer connects to the remote report server, we got HTTP 401 unauthorized problem.
When we copy the report url into IE, it asks for user name and password. If I typed in the report server's windows credential, I can access the report. I don't want to reveal my server's credential. So I tried to configure the report server to no credential
I found some links talking about configuring SSRS for unattended account
I configured one. It seems that this account must be a valid windows account of the report server.
Then I logged in Report Manager remotely and configured the data source to the following options:
Windows integrated security
Credentials are not required
It does not help.
Does anyone have any suggestion?
What is the right way authenticate client to remote access the report server?
Thanks,
FL

My winforms ReportViwer still failed to connect to the Report server. The server is on a win 2008
server R2.
Both client and server computers are not on any domain, but connected to the same wifi network. I disabled loopback check as MSFT kb suggested (http://support.microsoft.com/kb/896861)
Does anyone know how to solve this logon issue?
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/10/2010 7:34:06 PM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: serverName
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: reportUser
Account Domain: serverName
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: 123-PC
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2010-02-11T00:34:06.646670900Z" />
<EventRecordID>4706</EventRecordID>
<Correlation />
<Execution ProcessID="476" ThreadID="528" />
<Channel>Security</Channel>
<Computer>serverName</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">reportUser</Data>
<Data Name="TargetDomainName">serverName</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2313</Data>
<Data Name="SubStatus">0xc000006a</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">NtLmSsp </Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">123-PC</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">-</Data>
<Data Name="IpPort">-</Data>
</EventData>
</Event>

ESSO LM Agent Capturing application credential problem

Hi all,
In my test environment Am having the following
Oracle ESSO Logon Manager
ESSO-LM Administrative Console Version 11.1.1.5.1
IN Active Directory having two Organizational Units(OU) says
ESS , IMS
In both OU's am having 2 users.
In ESS says essuser01, essuser02
and in IMS says imsuser01, imsuser02
Domain Name : example.com
I have installed Admin Console in Windows 7 pro.
and LM Agent have been installed in another system also having Win 7.
In Left pane of my Admin console
Under
Global Agent Settings > Live > Synchronization > ADEXT
Base Location for Configuration Objects sets to
<li>OU=ims,DC=example,DC=com</li>
<li>OU=ess,DC=example,DC=com</li>
Location for storing user credentials sets to
Under respective directory user objects
Having Applications
ESS_yahoo - For yahoo mail login
IMS_Gmail - For Gmail login
Have published ESS_Yahoo(Application) and Live(Global Agent Settings) to target repository
OU=ess,DC=example,DC=com[example.com]
Similarly,
IMS_Gmail(Application) and Live(Global Agent Settings) to target repository
OU=ims,DC=example,DC=com[example.com]Problem is while login as IMS or ESS users LM Agent is capturing both applications.
Even I set
Global Agent Settings > Live > User Experience > Application Response > Initial credential Capture > Limit response to predefined applications for
All application Types & Web Applications set to
Predefined applications onlyMy need:
For ESS users Agent must capture only Yahoo credentials,
same as IMS user it must capture only Gmail not yahoo.
What i have to do. Am newbie to ESSO.
Response will be appreciated.
Bala:)

A few key element :
In the admin console : Navigate to Global Agent Settings -> Live -> Synchronization
Disable role/group security support.
Note : Database Synchronization will not work with this option enabled
Then :
Navigate to Global Agent Settings -> Live ->
Synchronization->DBEXT ->Required
Specify the database servers with one of the following values:
Provider=OraOLEDB.Oracle;Data Source=orcl;Extended
Properties='OSAuthent=1';
Provider=OraOLEDB.Oracle;Data Source=orcl;User
Id=SYSTEM;Password=Manager1;
orcl
Then : Navigate to Global Agent Settings-> Live -> Synchronization
-> DBEXT -> Advanced and enable Append Domain when naming objects
To connect to the DB to distribute Application Use :
Connection String : Provider=OraOLEDB.Oracle;Data
Source=orcl;User Id=SYSTEM;Password=Password1;
Repository Type : Generic Database
Then you can deploy application the the DB, using the configure SSO support....
Good luck

BI Widgets on AIR credential problem

Hi experts ,
i have one problem , i was installed BI Widgets on AIR in my mechine it's working fine, but the same software i was in stalled in my office loptop it's installed successfully, when give credential for BOE server its not taken ,Business objects working fine (infoview,webi,deski,designer and even life office )all are working fine,the only problem is BI Widgets are not taken the credential
at the time of installation i was installed supported software's also like Adobe AIR, flash player
can any one help me these issues

Hello akhil32 ,
as you refer to a Webi problem (BI Widgets) I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Host Credential Problem in Oracle 10g on Windows

Hi,
I have another problem that is really bothering me. I
have tried using Oracle database 10g on Windows XP and
it works fine till you shut down and attempt to
restart (or any administrative task)with the EM. It
asks for the Database and Host credentials but always
rejects the Host credentials. Now because i only have
the Administrator as the OS user, i try to give this
user and it's password and it still doesn't accept
that.
What could be the problem??? I infact have realized
that this problem is NOT there if i use 10.1.0 on Red
Hat Linux AS 3 because for the host credentials i use
the OS user Oracle and the password (Owner of Oracle
Installation)and it goes through fine.
In Windows, what should i do to rectify this problem.
Or is it a bug with Oracle on Windows. Or where should
i get the relevant Host credentials Oracle requests on
Windows or should i create a user??? Please
HELP!!!!!!!!!!
Austine

That could be the 'Log on as a batch job' problem. See here:
Re: Operating system user for Host cridentials

Host credential problem on XP Pro

Hi everybody.
Maybe I'm kicking in open doors here regarding the problem with host credentials in EM, but I think I found something.
As I have read in other posts I added my user account to the "Logon as batch job" in "Local security settings". When I add my user name there it gets registered as [domain]\[user name] since I'm on a domain.
But what I found is that the credentials must be supplied as [domain]\[user name] in EM as well or it won't work (you get the "wrong password for user" error.
Hope it helps someone a least. :)

Yes, very true..if it's a domain user, you will have to specify domain\username

Adobe credential Problem

Hi,
I am getting the following error :
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: ADS Render Exception occured. Append "sap-wd-errorPdf=true" to the URL and access the application once again. This time you will get an error PDF. Save the error PDF on the file system. This is a helpful attachment in case of an OSS message. com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights: java.lang.Exception: Could not retrieve a password for credential: ReaderRights Exception Stack Trace: com.adobe.ProcessingError:
How do I get the Adobe credentials installed i got the link the from this thread :
SAP Interactive Forms by Adobe
and installed the personal information exchange file , but in the visual admin its asking for a serial number...is that available only to the customers or any sort of trial is also available.What is the right procedure to go about this?
Regards,
Bhavana

Hello,
Have you requested a credential file from SAP? It is described in SAP note:
#736902
If you have this in the configuration guide you will find how to install the ReaderRights alias in the VA.
The password for the credential is in the response message from SAP in the customer ticket. If you have lost the password open a new ticket and SAP will send you the password again.
Best regards,
Dezso Pap

ADS Credential Problem

Hi,
In the configuration guide it is said that after we give the alias name and the password for the credential the page will refresh and the registerd credential will be shown.
In my case i gave the alias name and the password as given by SAP but the credential did not get registered that is i could not see my credential file under the credentials tab.But i did not get any error message as well.
Is there any way to know whether the credentials has been registered.
Regards,
Vijith

Hi,
I have specified the Credential during installation and i can see the same .pfx file in the Trust/Credentials directory.
While registering iam able to select the credential and i have also given the password provided b SAP but the page does not refresh when i press the add button.I tried restarting the service but even that did not show the list of registered credential.
Regards,
Vijith

Credential problem while running with SQL job agent

Hi,
SQL job agent fails to run when I change my computer login (Password) credentials information often.
How I can run the SQL job agent with Database login credentials.
Regards
Venkatesh S

Hi Venkatesh,
If I understand correctly, you are using a proxy account has your login credential to run a step of SQL Agent Job. So when you change the login’s password, the credential of the proxy account has an expired password, then the proxy account doesn’t work in
your job.
As per my understanding, we can only use SQL Server Agent Service Account or Proxy Account to run the SQL Server Integration Services Package steps in SQL Agent Job. Since the SQL Server Agent Service Account may not have required permissions to access the
resources in the packages, we recommend use Proxy Account. To create Proxy Account, we should create a credential first. To create a credential, we should specify a Windows user account. So we cannot use a SQL Server authentication login to run the job.
A good workaround is use a windows user account with a password that never expire or changes rarely or update the password of credential followed by your login.
Reference:
How to: Automate SSIS Package Execution by Using the SQL Server Agent (SQL Server Video)
How to: Run a Package
How to: Create a Proxy (SQL Server Management Studio
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle 10g Schedule Backup Host Credential Problem

I logged in to my database as sys AS SYSDBA but when i go to schedule backup i entered my OS WINDOW username and password but i failed to loggin can anyone please tell whats the reason behind this?
Thanks,
Waheed.

Can you help me? I've the same problem...
Thank's
Filippo

Dynamic BC4J JDBC credential problem

I am using bc4j 9.0.3.1 and trying to dynamically change jdbc credentials and connect to different databases. I did everything as described in article "How to support Dynamic JDBC Credentials".
I was able successfully connect from web application to database, but when I request ViewObject from app module - I got error "Error Message: JBO-25200: Application module is not connected to a database".
What happened is following:
My apps connect to database, it print following debug message:
[458] Creating a new pool resource
[459] Trying connection/2: url='jdbc:oracle:thin:@192.168.0.1:mxb' info='{user=carnegie, password=carnegie}' ...
[460] Successfully logged in
then in dubugger I see it calls ApplicationPoolImp class doFailover method and alwaus execute disconnect(appModule, true, cookie) method.
I do not know why it disconnection itself from the database.
// Store the passivation id on the application module cookie so that
// we know the last passivation id.
cookie.setPassivationId(passivationId);
// After passivating the application module attempt to clean up any
// records associated with previously passivated state. State may not be
// removed if the VM instance has died (pass a previous state to this
// method? Add logic to the application registry to handle this?).
doPersistenceOperation(REMOVE_STATE, appModule, prevPassivationId, cookie);
if (!wasConnected)
// Always retain the state.
disconnect(appModule, true, cookie);
Final debug statements I got:
[486] DefaultConnectionStrategy is disconnecting an application module connection
[490] ViewObject close prepared statements...
[491] ViewObject close prepared statements...
[492] ViewObject close prepared statements...
[493] ViewObject close prepared statements...
[494] ViewObject close prepared statements...
[495] ViewObject close prepared statements...
[496] *** closing jdbc connection now **** (oracle.jdbc.driver.OracleConnection@ed)
My problem - why it disconnection itself from the database after successfull connection? I want to use this connection for duration of the session.

hi DAguirre
I have found the class "oracle.jbo.http.HttpSessionCookieFactory" in these JAR files:
<your-jdevstudio10133-dir>\BC4J\jlib\bc4jhtml.jar
<your-jdevstudio10133-dir>\BC4J\lib\adfmweb.jar
You could try to add one of these JAR files to your classpath.
regards
Jan Vervecken

WRT160N log-in credential problem

I recently set up a WRT160n wireless router/access point for a friend. I've set these things up numerous times but never with this specific model. I successfully got into the device wirelessly, changed the SSID, changed the password, and set up WEP, generated the key, saved the information. The laptop i'm using has Windows Vista Business SP1. The nic sees the WRT160n fine, and I go to connect, it asks me to enter additional information, asking for user name (there is none), password (which i entered), but then it asks for a domain name. There is no domain. The computer is stand alone just using the router, so I assumed it meant for me to enter "workgroup".
No matter what combination of information, wep key, password, etc it will not allow me to connect to it. I am stuck now with this thing (which works perfectly when encryption is not applied) unsecured.
Im grateful for any insight or solutions or suggestions anyone can provide.
Thanks in advance.

I'm having the exact same problem only with the 120. Every other computer in the house is connecting fine except this desktop. Yesterday, it wouldn't boot past the Dell logo screen. I opened the case, disconnected the hard drive. I pulled a hard drive from a different identical desk top, put it in and booted. It booted fine. I took the new hard drive out and put the original back in. Booted fine. Connected to the network fine. Shut it down overnight then booted this morning. Booted fine but will not connect to the network. Is asking for the user name, password and domain logon. I haven't set up a user name, password or domain logon anywhere.
I've manually deleted the wireless network and manually created it 10 times. Still won't connect.
i'm at my wits end. Any other suggestions?

OCMS Installation User Credential Problem

During OCMS Installation at validating the credentials for the administrator account step i am getting this error;
"Oracle Administrator Credentials are not valid. Please re-enter credentials and try again"
but i am giving here UN: oc4jadmin & PW: manager1
through which i can login AS Control but this failed during OCMS installation
Please let me know the reason and solution
Thanks,
Waheed.

My intention to reply this thread is just to share my experience with the same error when trying to install OCMS in a Solaris Sparc64 SunOS 5.9 Sun-Fire-480RSystem.
My first attempt was to install TimesTen and OCMS with a different Unix user than Oracle Application Server and I was getting the Credentials Problem, so I read this thread and tried most of the suggestions here.
First I re-installed AS and didn´t work; I tried using Silent mode as recommended in OCMS Release Notes, didn´t work.
With the ocms Unix user I was able to execute succesfully the following commands in the Unix prompt:
$ opmnctl status -port
saturn:6003
$ java -jar /home/oraAS10g/product/10.1.3.1/OracleAS/j2ee/home/admin_client.jar deployer:oc4j:opmn://saturn:6003/home oc4jadmin oc4jadmin1 -validateURI
URI deployer:oc4j:opmn://saturn:6003/home is valid and connected
$ java -cp /tmp/validation-4.1.1-756.jar oracle.sdp.config.Oc4jAdminPasswordValidator deployer:oc4j:opmn://saturn:6003/home /home/oraAS10g/product/10.1.3.1/OracleAS oc4jadmin oc4jadmin1
true
$ java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
The results looked OK, then I notice in the file Undefname_Undefpurpose.04140636 that installation script was not getting the correct hostname and port!!
Take a look at the logs:
(Apr 14, 2008 6:37:37 PM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, Performing AS Admin Validation - User: oc4jadmin
(Apr 14, 2008 6:37:37 PM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, /home/oraAS10g/product/10.1.3.1/OracleAS/jdk/jre/bin/java -cp /tmp/validation-4.1.1-756.jar oracle.sdp.config.Oc4jAdminPasswordValidator deployer:oc4j:opmn://localhost:null/home /home/oraAS10g/product/10.1.3.1/OracleAS oc4jadmin XXXXXXXXXX
(Apr 14, 2008 6:39:27 PM), Install, com.oracle.ocms.is.actions.DisplayUserMessageAction, msg1, Display Message: Oracle Administrator credentials are not valid. Please re-enter credentials and try again.
If you look carefully, you will see deployer:oc4j:opmn://localhost:null/home ... localhost:null when it should have been saturn:6003
I haven't installed Oracle AS and OCMS other than Solaris, but you should get a similar log file for the installation for other OS, where you can compare or verify what I saw in my case.
So, what I finally end up doing was to install TimesTen and OCMS with the same Unix user as Oracle AS which installed succesfully.
Take a look at the log file:
(Apr 15, 2008 11:05:28 AM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, Performing AS Admin Validation - User: oc4jadmin
(Apr 15, 2008 11:05:28 AM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, /home/oraAS10g/product/10.1.3.1/OracleAS/jdk/jre/bin/java -cp /tmp/validation-4.1.1-756.jar oracle.sdp.config.Oc4jAdminPasswordValidator deployer:oc4j:opmn://localhost:6003/home /home/oraAS10g/product/10.1.3.1/OracleAS oc4jadmin XXXXXXXXXX
(Apr 15, 2008 11:05:34 AM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, OPMN PORT: 6003
(Apr 15, 2008 11:05:34 AM), Install, com.oracle.ocms.is.actions.CustomWizardLogAction, msg1, AS TTLib Path: /home/oraAS10g/product/10.1.3.1/OracleAS/j2ee/ocms/applib
If you look carefully again, you will see that now I had deployer:oc4j:opmn://localhost:6003/home ... not saturn:6003 as I expected, but at least the correct port and the installation process continued succesfully!!!
Hopefully this helps or gives some new ideas!
Cheers,
Antonio

Credential problem

Similar Messages

Maybe you are looking for