Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name: Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID: 1005
Level: Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla
If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile
Similar Messages
-
BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups
Dear all
In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
" Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
Anyone has encountered similar issue?
BO version: BO XI 3.1 SP5
Authenticate: Windows AD
Thanks and RegardsPlease get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish- -
ViewStateLog: Failed to write to the velocity cache
Hello,
I am not able to Attach a Documents to the SharePoint site.When i check the log file it says"ViewStateLog: Failed to write to the velocity cache".Can any say What may the problem?
Regards
Ravi.Reply:
Hi,
Do you mean that you are unable to attach a file to the item in a SharePoint list?
Please have a try in other lists and in other sites and test whether this issue occurs.
Please use the Clear-SPDistributedCacheItems cmdlet to clear cached items from the distributed cache server.
Here is an article about how to clear cached items:
https://technet.microsoft.com/en-us/library/jj219715.aspx?f=255&MSPPError=-2147217396
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
This issue is driving us nuts - there are no issues with Domain Controllers or AD in this environment. The server it is citing in the error has been retired - it was gracefully dcpromo'ed down and removed from the environment. DNS has no record of it, nor is it located anywhere else. We are not able to log into Outlook Web App either with authentication failed errors - and I can't help but expect these 2 issues are related? I tried hard coding the Configuration Domain Controller at the org level, as well as using the -staticdomaincontrollers and -staticglobalcatalogservers with the "Set-ExchangeServer" powershell command - no luck.... System settings of the exchange 2010 servers show they are pointing to the correct DCs - but I still get this error accompanied with long delays in rendering windows in EMC. Extremely frustrating..... I have an issue logged with MS now, but they aren't looking at them until Nov 9. Has anyone seen this issue at all? More info on the OWA config - using Form based auth, and I'm not able to perform a simple test-owaconnectivity -mailboxcredential (get-credential\username) -allowuntrustedcertificate -allowinsecurelogon - please help
Create a "global catalog" on the 2nd domain contoller, will fix this problem.
To create a new global catalog:
On the domain controller where you want the new global catalog, start the Active Directory Sites and Services snap-in. To start the snap-in, click Start , point to Programs , point to Administrative Tools , and then click Active Directory Sites and Services .
In the console tree, double-click Sites , and then double-click <var>sitename</var> .
Double-click Servers , click your domain controller, right-click NTDS Settings , and then click Properties .
On the General tab, click to select the Global catalog check box to assign the role of global catalog to this server.
Restart the domain controller. -
Sccm 2012 extent the active directory schema error
Hello
I am experiecing an issue when attempting to extend my AD Schema for SCCM 2012
<12-10-2014 20:04:33> Modifying Active Directory Schema - with SMS extensions.
<12-10-2014 20:04:33> DS Root:CN=Schema,CN=Configuration,DC=,DC=com
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Assignment-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Roaming-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Default-MP. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Device-Management-Point. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Name. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Address. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Health-State. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Source-Forest. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-Low. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-High. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Version. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Capabilities. Error code = 8224.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Management-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Server-Locator-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Site. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Roaming-Boundary-Range. Error code = 8202.
<12-10-2014 20:04:33> Failed to extend the Active Directory schema, please find details in "C:\ExtADSch.log".
any one help me to fix this issueHi,
It is most likley due to a replication Issue in your AD, check the previous thread on the topic:https://social.technet.microsoft.com/Forums/systemcenter/en-US/1d377109-4fa9-4608-8a3a-cefd436e82ee/error-8224-when-extending-active-directory-schema
Make sure that all replication issues are solved and try again.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
I think my iPhoto memory is full. I cannot get in to delete photos. When I open it I get the Unable to write to library iPhoto libraryCheck that you have permission to write to the library directory" and i can't do anything else. I tried alt/cmd first aid and it didn't work.
I want to get in and move pics over to a USB stick drive but cannot get past the Unable to write to library..message.Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Event ID 91 Could not connect to the Active Directory. Active Directory Certificate Services
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DC1.chickbuns.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-07T19:34:00.000000000Z" />
<EventRecordID>819</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>DC1.chickbuns.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
:\Users\Administrator>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
Warning: DC1 is not advertising as a time server.
......................... DC1 failed test Advertising
Starting test: FrsEvent
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
......................... DC1 passed test SysVolCheck
Starting test: KccEvent
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... DC1 passed test ObjectsReplicated
Starting test: Replications
......................... DC1 passed test Replications
Starting test: RidManager
......................... DC1 passed test RidManager
Starting test: Services
......................... DC1 passed test Services
Starting test: SystemLog
......................... DC1 passed test SystemLog
Starting test: VerifyReferences
......................... DC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: LocatorCheck
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
......................... chickbuns.com failed test LocatorCheck
Starting test: Intersite
......................... chickbuns.com passed test Intersite.My test lab one sinle domain controller server 2008 R2 Sp1 and member exchange server is using,the event error 91 is generated as per the technet article http://technet.microsoft.com/en-us/library/cc774525(v=ws.10).aspx the domain
computer and domain users in public key services container is not listed ..
C:\Users\Administrator>netdom /query fsmo
Schema master DC1.chickbuns.com
Domain naming master DC1.chickbuns.com
PDC DC1.chickbuns.com
RID pool manager DC1.chickbuns.com
Infrastructure master DC1.chickbuns.com
The command completed successfully.
Command Line: "dcdiag.exe
/V /D /C /E"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine DC1, is a Directory Server.
Home Server = DC1
* Connecting to directory service on server DC1.
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
===============================================Printing out pDsInfo
GLOBAL:
ulNumServers=1
pszRootDomain=chickbuns.com
pszNC=
pszRootDomainFQDN=DC=chickbuns,DC=com
pszConfigNc=CN=Configuration,DC=chickbuns,DC=com
pszPartitionsDn=CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
fAdam=0
iSiteOptions=0
dwTombstoneLifeTimeDays=180
dwForestBehaviorVersion=3
HomeServer=0, DC1
SERVER: pServer[0].pszName=DC1
pServer[0].pszGuidDNSName (binding str)=771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
pServer[0].pszDNSName=DC1.chickbuns.com
pServer[0].pszLdapPort=(null)
pServer[0].pszSslPort=(null)
pServer[0].pszDn=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pServer[0].pszComputerAccountDn=CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
pServer[0].uuidObjectGuid=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].uuidInvocationId=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].iSite=0 (Default-First-Site-Name)
pServer[0].iOptions=1
pServer[0].ftLocalAcquireTime=ea9513a0 01cf0dd4
pServer[0].ftRemoteConnectTime=ea2bca80 01cf0dd4
pServer[0].ppszMaster/FullReplicaNCs:
ppszMaster/FullReplicaNCs[0]=DC=ForestDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[1]=DC=DomainDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[2]=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[3]=CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[4]=DC=chickbuns,DC=com
SITES: pSites[0].pszName=Default-First-Site-Name
pSites[0].pszSiteSettings=CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].pszISTG=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].iSiteOption=0
pSites[0].cServers=1
NC: pNCs[0].pszName=ForestDnsZones
pNCs[0].pszDn=DC=ForestDnsZones,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].dwFlags=0x00000201
pNCs[0].aCrInfo[0].pszDn=CN=5fc582f9-b435-49a1-aa54-41769fc24206,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].pszDnsRoot=ForestDnsZones.chickbuns.com
pNCs[0].aCrInfo[0].iSourceServer=0
pNCs[0].aCrInfo[0].pszSourceServer=(null)
pNCs[0].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[0].aCrInfo[0].bEnabled=TRUE
pNCs[0].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[0].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[0].aCrInfo[0].pszNetBiosName=(null)
pNCs[0].aCrInfo[0].cReplicas=-1
pNCs[0].aCrInfo[0].aszReplicas=
NC: pNCs[1].pszName=DomainDnsZones
pNCs[1].pszDn=DC=DomainDnsZones,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].dwFlags=0x00000201
pNCs[1].aCrInfo[0].pszDn=CN=9e1c2cb8-b90b-4e9f-90dd-9903f935e4af,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].pszDnsRoot=DomainDnsZones.chickbuns.com
pNCs[1].aCrInfo[0].iSourceServer=0
pNCs[1].aCrInfo[0].pszSourceServer=(null)
pNCs[1].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[1].aCrInfo[0].bEnabled=TRUE
pNCs[1].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[1].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[1].aCrInfo[0].pszNetBiosName=(null)
pNCs[1].aCrInfo[0].cReplicas=-1
pNCs[1].aCrInfo[0].aszReplicas=
NC: pNCs[2].pszName=Schema
pNCs[2].pszDn=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].dwFlags=0x00000201
pNCs[2].aCrInfo[0].pszDn=CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[2].aCrInfo[0].iSourceServer=0
pNCs[2].aCrInfo[0].pszSourceServer=(null)
pNCs[2].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[2].aCrInfo[0].bEnabled=TRUE
pNCs[2].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[2].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[2].aCrInfo[0].pszNetBiosName=(null)
pNCs[2].aCrInfo[0].cReplicas=-1
pNCs[2].aCrInfo[0].aszReplicas=
NC: pNCs[3].pszName=Configuration
pNCs[3].pszDn=CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].dwFlags=0x00000201
pNCs[3].aCrInfo[0].pszDn=CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[3].aCrInfo[0].iSourceServer=0
pNCs[3].aCrInfo[0].pszSourceServer=(null)
pNCs[3].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[3].aCrInfo[0].bEnabled=TRUE
pNCs[3].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[3].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[3].aCrInfo[0].pszNetBiosName=(null)
pNCs[3].aCrInfo[0].cReplicas=-1
pNCs[3].aCrInfo[0].aszReplicas=
NC: pNCs[4].pszName=chickbuns
pNCs[4].pszDn=DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].dwFlags=0x00000201
pNCs[4].aCrInfo[0].pszDn=CN=CHICKBUNS,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[4].aCrInfo[0].iSourceServer=0
pNCs[4].aCrInfo[0].pszSourceServer=(null)
pNCs[4].aCrInfo[0].ulSystemFlags=0x00000003
pNCs[4].aCrInfo[0].bEnabled=TRUE
pNCs[4].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[4].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[4].aCrInfo[0].pszNetBiosName=(null)
pNCs[4].aCrInfo[0].cReplicas=-1
pNCs[4].aCrInfo[0].aszReplicas=
5 NC TARGETS: ForestDnsZones, DomainDnsZones, Schema, Configuration, chickbuns,
1 TARGETS: DC1,
=============================================Done Printing pDsInfo
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Failure Analysis: DC1 ... OK.
* Active Directory RPC Services Check
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
The DC DC1 is advertising itself as a DC and having a DS.
The DC DC1 is advertising as an LDAP server
The DC DC1 is advertising as having a writeable directory
The DC DC1 is advertising as a Key Distribution Center
The DC DC1 is advertising as a time server
The DS DC1 is advertising as a GC.
......................... DC1 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC DC1 for domain chickbuns.com in site Default-First-Site-Name
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
[DC1] No security related replication errors were found on this DC!
To target the connection to a specific source DC use /ReplSource:<DC>.
......................... DC1 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the server is running DFSR.
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC DC1.
* Security Permissions Check for
DC=ForestDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=chickbuns,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=chickbuns,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=chickbuns,DC=com
(Domain,Version 3)
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\DC1\netlogon
Verified share \\DC1\sysvol
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
DC1 is in domain DC=chickbuns,DC=com
Checking for CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com in domain DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com in domain CN=Configuration,DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
......................... DC1 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was
not entered
......................... DC1 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
DC=ForestDnsZones,DC=chickbuns,DC=com has 1 cursors.
DC=DomainDnsZones,DC=chickbuns,DC=com has 1 cursors.
CN=Schema,CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
DC=chickbuns,DC=com has 1 cursors.
* Replication Latency Check
......................... DC1 passed test Replications
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=chickbuns,DC=com
* Available RID Pool for the Domain is 1600 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
* DC1.chickbuns.com is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1103
......................... DC1 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... DC1 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... DC1 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... DC1 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com and backlink on
CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on
CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (msDFSR-ComputerReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com are
correct.
......................... DC1 passed test VerifyReferences
Starting test: VerifyReplicas
......................... DC1 passed test VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... DC1 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: DNS
Test results for domain controllers:
DC: DC1.chickbuns.com
Domain: chickbuns.com
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Enterprise (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000007] Intel(R) PRO/1000 MT Network Connection:
MAC address is 00:0C:29:DE:7F:EB
IP Address is static
IP address: 192.168.1.30
DNS servers:
192.168.1.30 (dc1.chickbuns.com.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
192.168.1.1 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: chickbuns.com.
Delegated domain name: _msdcs.chickbuns.com.
DNS server: dc1.chickbuns.com. IP:192.168.1.30 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone chickbuns.com
Test record dcdiag-test-record deleted successfully in zone chickbuns.com
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) PRO/1000 MT Network Connection:
Matching CNAME record found at DNS server 192.168.1.30:
771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
DC1.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.48c41195-2630-4461-aaef-ec2a63cd8bf3.domains._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._udp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kpasswd._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.gc._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_gc._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.pdc._msdcs.chickbuns.com
Total query time:0 min. 3 sec.. Total RPC connection
time:0 min. 0 sec.
Total WMI connection time:0 min. 6 sec. Total Netuse connection
time:0 min. 0 sec.
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.1.1 (<name unavailable>)
All tests passed on this DNS server
Total query time:0 min. 0 sec., Total WMI connection
time:0 min. 5 sec.
DNS server: 192.168.1.30 (dc1.chickbuns.com.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.chickbuns.com. is operational on IP 192.168.1.30
Total query time:0 min. 3 sec., Total WMI connection
time:0 min. 0 sec.
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: chickbuns.com
DC1 PASS PASS PASS PASS PASS PASS n/a
Total Time taken to test all the DCs:0 min. 9 sec.
......................... chickbuns.com passed test DNS
Starting test: LocatorCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... chickbuns.com passed test Intersite -
Hi,
I have a setup ISE 1.1.1. Users are getting authenticate against AD. Everything is working fine except some users report disconnection. I see in the ISE that (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out). Users are using Windows 7 OS.
Error is enclosed & here is the port configuration.
Port Configuration.
interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30 interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30
Please help.The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts) -
Exchange 2010 - #554 5.2.0 The Active Directory user wasn't found
We have migrated form Exchange 2003 to Exchange 2010 a year ago with no issues. All Exchange legacy servers uninstalled with no issues. We had an issue today were emails sent to mail-enabled public folder was returning NDRs. This happened on two or three
and then trickled down thorugh several public folders. This client has several public folders and uses them for business processes. There have been 100s of incidents now.
Symtoms:
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
#554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn't found. ObjectNotFoundException: The Active Directory user wasn't found. ##
We are getting the following Event log messages on Hub transport servers.
Log Name: Application
Source: MSExchange Store Driver
Date: 5/29/2014 2:45:53 PM
Event ID: 1020
Task Category: MSExchangeStoreDriver
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxx
Description:
The store driver couldn't deliver the public folder replication message "Backfill Request (xxxxxxx)" because the following error occurred: The Active Directory user wasn't found..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Store Driver" />
<EventID Qualifiers="49156">1020</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-05-29T18:45:53.000000000Z" />
<EventRecordID>168407</EventRecordID>
<Channel>Application</Channel>
<Computer>xxxxxx</Computer>
<Security />
</System>
<EventData>
<Data>"Backfill Request (xxxxxxx)"</Data>
<Data>The Active Directory user wasn't found.</Data>
</EventData>
</Event>
Actions:
We have executed the following steps.
1. Start the ADSI Edit MMC Snap-in. Click Start, then Run, and type adsiedit.msc, and then click OK.
2. Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand CN=Configuration,DC=DNSDomainName,DC=com.
3. Expand CN=Services, and then CN=Microsoft Exchange, and then expand CN=YourOrganizationName.
4. You will see an empty Administrative Group. Expand the CN=YourAdministrativeGroupName.
5. Expand CN=Servers.
6. Verify there are no server objects listed under the CN=Servers container.
7. Right click on the empty CN=Servers container and choose Delete.
8. Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
To no avail the issue still exists.
We have not rebooted the servers and plan to in the early morning.
We have dismounted/mounted public folder DBs
Does anyone have any other suggestions?
Danny Kennedy, MCSE, MCITPI have already uninstalled legacy servers a year ago.
This was the solution:
I moved the public folder hierarchy to exchange 2010 using ADSIEdit.
If you don't know adsiedit tool that much check this
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03067450-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=1840527&ac.admitted=1401455429281.876444892.492883150
Danny Kennedy, MCSE, MCITP -
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek -
got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
RajHi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS. -
I Have a Windows 7 on an Acer Aspire 5742 laptop and an HP LaserjetP1102w. There are two wireless laptops in the household. I am trying to print from Microsoft Word Starter, but it states "No Printers Installed" and if I try to add a printer I get the message: The Active Directory Domain Services is currently unavailable.
I can print Self Test/Device configuration sheets (on this the iPv4 reads as 0.0.0.0.), a printer test page and a test print from the HP Print and Scan Doctor. It is the network which is not reading the printer.
I have disabled my firewall, un- and re-installed the printer. I have also tried to uninstall and reinstall the printer using the Window 7 installer utility. but that tells this printer "is not currently supported by this Wizard"
I have searched the web for people with the same problem but found nothing that has helped me. Not to put too fine a point on it I am at my wit's end.
You are my last resort (no pressure, then!)
This question was solved.
View Solution.Are the configuration reports with the 0.0.0.0 being printed directly from the printer? A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router). The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
What brand and model is the router?
Is the wireless light a solid blue light or a flashing blue light?
You mentioned an Active Directory Domain Services error message. Outside of corporate networks, this is not an error message you should get. I suspect there might be a deeper software issue at fault. Please provide the exact steps you are using to add the printer to generate that error message.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Cannot Print. "The Active Directory Domain Services is currently unavailable"
Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
Select Printers
Right-click on Add Printer
Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support -
How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
szWhile
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen! -
Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
BharathApply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi
Maybe you are looking for
-
FINDER keeps restarting itself.
ok, I wrote before about the issues I'm having with FINDER. I have since realised that if I am on my Finder/Desktop window showing the desktop - it keeps restarting itself every 10-15 seconds. If I have a window open (such as looking in Folder Conten
-
Upgrading from Office 2007 to Office 2013. We may need to save the user settings on the client computer, because we are moving some of the systems from 32-bit to 64-bit. How can we export the settings to a folder?
-
I used BDLS many times but can any one explain what exactly BDLSS used for? I read that BDLSS can be used to change logical sys names remotly.(Can any one explain me on this) thank you
-
When i try to open Firefox, it says Firefox has stopped working & A problem caused to stop working correctly. OS: Windows 7 Home Premium
-
Datatypes in a recursive common table expression
I'm trying to use a (recursive) common table expression to generate a list of dates. The following code is working fine with 11.2 WITH dates ( nr, dt ) AS ( SELECT 1, DATE '2005-02-01' from dual UNION ALL SELECT d.nr + 1, DATE '2005-0