Credit amount not updated once gave reason for rejection

Dear all
i want to know one thing once i Gave reason for rejection to sales order or some line items that amount should play in credit Account of the customer
but in my case it is not Playing
ex: i have given Credit limit 20000 rs
now customer created one sales order with the value 20000 rs ...so Credit limit finished
Now Due to some problem Maintained reason for rejection for that document
now That 20000 rs should add in Customer account right but unable to create new sales order with that customer .
What is problem cause?

Dear Madhuri
RVKRED88 & RVKRED77 Run the programs then only it will be updated
please check this link Rejected orders decrease credit limit
Thanks a lot
venu

Similar Messages

Not able to put reason for rejection at sales order level.

Hi Gurus,
I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out.
Please guide me what can be the solution.
Regards
Vinod

As far a I understand you created PO for line item
So first check whether GR is reversed or not for PO
Then mark this line item for deletion in PO and then in PR
Check if you have created any billing document for PO if so reversed that invoice
Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
If you have Sales order related Billing, and if you have done billing reverse the same
If you have Delivery related Billing, and if you have done billing reverse the same
After reversing all docuemnts created for Sales order then only try to reject the line item
You can check table VBFA for document flow

Reason for Rejection at Sale sorder item - Not updating the quotation

Dear All,
I have quotation with 100 quantity and created 2 sales orders with reference to the quotation with qunatity 60 and 40.
Next changed the first sales order with reason for rejection at item level for 60 quantity.
But sales order status is still complete, where it should open and may create one sale sorder with 60.
now, issue is when ever reason for rejection in sales order, it should update the status of quotation.
Is this standard behavior???
Thanks in Advance.

Hi,
When you put the reason for rejection in the sales order, it is SAP standard to put the sales order complete. When the sales order is complete, then I believe system considers the quotation to be complete as well.
Try the below. It might help.
a. Delete the line item with 60 qty. Now check if the quotation has opened up. If yes, then, there you go with a solution... Else,
b. Check the configuration for sales order document type. Check what is the marking done for completion of the quotation. Put in the right one so that quotation is not marked (or updated) as complete when the reason for rejection is put in the sales order.
Hope this helps
Thanks
Mukund S

BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

Hi,
The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
Request your suggestions to avoid this error.
Thanks

>
anikaushi wrote:
> Hi,
> The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
>
> error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010 ready for input"
>
>
> Thanks
Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
Please see the SDN thread for how you can avoid this error...
Re: Cancel Sale Order after Issued Billing

Excise Base amount not updated in J_1iexcdtl table -reg

Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*"     VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*"      KONV STRUCTURE KONV
*{   INSERT         RDSK925285                                        1
TABLES : KONV.
data :   W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
       KAWRT LIKE KONV-KAWRT,
       POSNR LIKE VBRP-POSNR,
       END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
    EXCITM_BASE = ITAB1-KAWRT.
    POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*}   INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumar

solved with the same user exit

Reason for rejection in Credit Memo

Hi gurus,
We have a Credit Memo Request with one position. This position is rejected (Reason for rejection) and document is blocked at head level (Billing block).
If we unblock Billing block from CR, we can create a bill of 0 price. We want system willn't create bills in this case, because the item level is rejected and a bill of 0 euros is not correct for us.
Thank you!!

Hello,
When you reject the line item in the document the net value become 'Zero',
But when you reject with a 'reson for rejection' the order will get closed, it should not allow processing the billing again. How many line items you have in this credit memo request?
Check the status of the credit memo request in VA03 --> Environment --> Status Overview. Check whether the credit memo request is 'completed' or not??
Prase

Reason for rejection not changed in transaction MASS

Hi everybody,
I'm trying to update a sales order item with a reason for rejection (field VBAP-ABGRU) in transaction MASS but it doesn't work. I took a look in SAP notes and found similar problems but these notes (specially note 390105) don't apply to our version (4.7 support package 22). Before opening a note in SAP I would like to have someone's opinion about the issue.
Thanks,
Paulo

Paul, it doesn't work because the field is not updated despite success message issued when the transaction is finished (I tried to change the field content from blank to other value). The field is available in transaction MASS and I have successfully tested it in another system (release 6.00). But now I found a note (regarding to the same problem in another field - MASSSDPOSVBKD-KURRF) that can be helpful. It's note 777746 and it applies to our release. So, I'm waiting for the basis team to implement it to see what happens.
Thank you,
Paulo

Skype Credit Do Not update

Dear Community,
I recently purchased a 25$ subscription and I received the order number and the money was withdrawn from my bank account.
However, when I log into my Skype client for Windows 7, the credit did not update and still showing the old value
Please advise.
Dodito

Soon as I made a call, credits updated.
thanks.

SALES ORDER REASON FOR REJECTION NOT WORKING .

Hi Friends
Though user mention reason for rejection in preceding sales orders' line item s,still those line items are being copied to subsequent documents ( to another sales order and billing document ) .
Do you feel there may be problem is in standard SAP functionality or I have to do something in configuration ( copy control ) to restrict it ?. not one sales order , it's happening for all the sales orders .
Thanks in advance
Rusheek

Please check ur copying requrement routine in VTAA must be "301" and "Pos./neg. quantity" must be "+". Check with this configuration,
If any query please revert back
Rgds
Dhirajjjj

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
We await your response .
Thank you very much .

This is a user to user forum with "some" Adobe staff participation, make requests at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Note on Reason for rejection during PR/PO rejection

Dear Experts
While rejecting PR/PO by approver, is it possible to give note on reason for rejection in standard SAP? . Also, is there any standard transaction where i can see the entire history of approvals including date & reason for rejection note if available?
Kindly help me out..
Thanks & Regards,
Kumar

Hai Arminda Jack
Thanks for your reply.
The reason for rejection what i have mentioned is purchasing perspective. To be clear, when approver is not satisfied with the datas in PR/PO in terms say qty, price, delivery date, approver will be rejecting the PR/PO. During rejection, approver needs to mention some note(manually typed) during his rejection of PR/PO.
Kindly suggest.
Thanks & Regards,
Kumar

Why not updated Adobe Flash Player for Google Chrome up to version 16 .0. 0. 296?

Hello, me why not updated Adobe Flash Player
for Google Chrome: 16. 0. 0. 280,
and for Mozilla Firefox and Internet Explorer
Adobe Flash Player has been updated up to version: 16.0.0. 296.
I will be glad of your help.
Здравствуйте, у меня почему не обновляется Adobe Flash Player
для Google Chrome: 16. 0. 0. 280,
и Mozilla Firefox и Internet Explorer
Adobe Flash Player был обновлен до версии: 16.0.0. 296.
Я буду рад вашей помощи.

Dear Maria, hello.
I am very grateful for the help.
All turned out!!! ))) Thank You!!!
Sincerely, Rem.
Уважаемая Мария, здравствуйте.
Я очень благодарен за помощь.
Все получилось !!! ))) Спасибо !!!
С уважением, Рем.

Codes not visible along with description in Reason for Rejection-VA02

Hi Friends
I am facing an issue. I cannot see the Codes along with Description in Reasons for Rejection drop down in VA02 which are defined in SPRO.
Please help me maintaining front end settings.
Thanks...

Hi,
Click on Customize Local layout(Press Alt+F12)-->Options
Goto Expert tab.
Tick the checkbox under "Show keys in all Dropdown lists".If you want them in a sorted manner,click on the check box "Sort Items by key".
click on Apply and OK.
Regards,
Krishna.

Status of Sales Order Open Even after assigning Reason for Rejection.

Hi All,
I am facing with a basic problem wherein even after assigning a reason for rejection status for a sales order, the sales order numbere is appearing in the list of Open Sales Order(VA05).
Also another case is i created a sales order with one line item, invoiced the same. Now i cancel the invoice and further wanted to close the sales order as i cannot delete the same. In this case also i see that even after assigning the reason for rejection, the sales order number along with its details appear in the list of open orders.
Can somebody please tell me whatt configurations have i missed?.
Regards
Bhushan
Edited by: NAGABHUSHAN THIPPANNA on Nov 30, 2009 9:14 AM

Hi Vivek,
Thanks for the reply... My issue got solved partially. Now if i assign a "Reason for rejection" to the sales order then that sales order is not reflecting in the VA05 (open orders list).
But given a scenario wherein i create a sales order and whose quantities & values gets updated in the standard infostructures and i will be able to see the same by executing MCTE (incoming orders & Qty). After assigning the reason for rejection for the same sales order i view the output of MCTE then the report still displays the old ordered quantity and value. Is there any wayout to control this wherein the moment we assign a reason for rejection for a line item in a sales order and the values get reversed in the standard infostructures.
Thanks and Regards
Bhushan

Reason for rejection For open line items

Hi Experts ..
I Have checked in Google and in scn But Not able to find exact one
How to achieve This Issue
Created sales order line item ---150 qnty Now delivered---100 qnty PGI As well as
Now Clint wants to give reason For rejection For 50 qnty
Now Generally what we are doing is Just changing the qnty in sales order change mode VA02 --100
But some times they have so many open line items are there and not possible to change in all line items exact number
So now i trying to give reason for rejection Line item For full 150 qnty Because Automatically 50 qnty Will be reduced in MD04
But when i am Giving reason For rejection To line item system is giving error msg that subsequent document is being processed
So any Enhancement shall we do To skip this
Thank a lot

Dear T.W Sir Thanks a lot For your replay
But I can not see that the excess qty (not delivered) is being deducted from MRP, when Reason for Rejection is set.
Sir we can see ...May be it will take 5 mnts time To be updated ( MD04)
By the By , sir you have any idea To control This pop-up Message ( In your case it may be information msg But some times We are getting Error Msg )
so Where we can control Warning to Error like this
or it is related to enhancement issue

Credit amount not updated once gave reason for rejection

Similar Messages

Maybe you are looking for