Credit block order which is release once

hi gurus
My requirement is ____ my Clint release order form credit block and give a credit note.But again they want to block that order for credit.
Means they create order,delivery,billing and release the order from credit block.But now they again want to block that order for credit.
Please help me how can i solve this.
thanks

Hi,
In vkm3 you can see the tabs release (flag ) and Reassign tab , after releasing the sales order from vkm3 ( giving the credit note) then again go to VKM3 and click on thereassign tab( the order) .....Then automatically order is going to on credit hold .....
please check and get back....
If it dosn't work then you need to write User-exit for that and assign in OVA8
It may be helpfull for you.........
Regards,
venkataswamy,y
Edited by: yanamadala venkataswamy on Sep 12, 2009 11:08 AM

Similar Messages

Credit block orders transfer of requirements to SNP

Hi Gurus,
I work on the Demand Planning stream, but i would like to know if APO SNP Heuristic would behave the same as R/3 regarding Credit Blocked orders.
in R/3 due to Requirement 101 in OVB8, the credit blocked sales orders do not get confirmed, yet they still send the requirements to MRP MD04.
what is the logic in SNP or PPDS for this, does a special requirement type gets generated in SNP, even though the Sales Order is not confirmed and not showing in APO DP?
feedback appreciated
regards
JD Loera

Jeevi,
I will never recommend what Siva has mentioned. What it means is that
1. The "Item" - Component will no longer be copied when a Production/Process/Planned order is created.
2. System does not create any reservation for that material.
3. If you need to Issue that material to an order, it will be "unplanned" Issue.
Hope you understood the problems associated with this.....I would suggest to go with Planning strategy "11". If it is external Procurement look at different MRP type.
Reward your points is these were helpful to you,
Regards,
Prasobh

Reversal of a maint. order which was released through a maintenance plan?

Hi All,
Is there a way to do reversal of a maintenance order that was released through a maintenance plan?
Because I do not want to process the order; as such I would like to put a reversal indicator for that order and go ahead with the next order that was called through a maintenance plan.
If YES, kindly let me know how to do it?
Many thanks in advance.
Kannan J

Hi Thyagarajan, Thanks for the response!
When I want to skip the maintenance call object that was generated through a plan, the system gives me the following message.
"CALL CAN NO LONGER BE SKIPPED"
When I press for further help, system gives me the following message:
"Call can no longer be skipped
Message no. IP405
Diagnosis
You have tried to skip a date that has already been called.
System Response
Since maintenance call objects, for example, maintenance orders, already exist for the dates that have been called, you can no longer skip a date within the scheduling process.
Procedure
If you do not want to perform the maintenance call objects due on that date, you must reverse the orders that have been called.
You can select the maintenance call objects that have been called using the list editing functions in maintenance processing."
Which means there should be a way to reverse the order, isn't it?
May be with this message you may be able to throw some help on this.
Many thanks in advance
Kannan J

Credit management not updated for the first credit blocked order only

Hi experts,
Pls help to solve. Thx.
Case: The first sales order is created against credit block because the credit limit is exceeded. In FD33, no credit data related to the first order indicates, i.e. credit limit used shows zero as well as sales value, credit exposure. In VKM1, the blocked order can be captured.
As long as the second order is created, the credit management can be updated. But, it still does not capture the data from the first order.
The sales orders I test have the same delivery date.
Questions:
1. Is the standard behavior for the dynamic credit check?
2. If not, how to make credit management consider the first order data?
PS. In OVA8, update 000012 is applied while horizon is 4 months.

Hello Jonathan,
After testing, I found credit management can consider the first order data if using 000018 only. Why 000012 cannot consider it?
I have checked the explanation for those two update groups by F4. I feel obscure about the explanation of sales order between them (see below).
000012:
Sales order
Increases open order value from delivery-relevant schedule lines
000018:
Sales order
Increases open delivery value
By the way, my testing data as below:
1. were the two sales orders of the same document type? Answer: yes. Same document type, same customer, same delivery date, etc.
2. were the item categories the same? if not, was one not relevant for credit check? Answer: Yes, the same.
3. did the documents have the same value? if the second order had a lower value and was not blocked for credit, the exposure will be updated. Answer: yes, credit management can consider the second order data ONLY. It seems the first order have not been created if checking credit management.

Sales order are going for credit block once the re-scheduling is executed.

Created a sales order where Qty is not confirmed order went for credit block (dynamic credit check block) and order has released through VKM3 and Executed the re-scheduling (V_V2) later qty is confirmed for the sales order but again the order went for credit block.
Note: Configuration setup is already done in the Define Automatic Credit control
Released documents are still unchecked.
Deviation in % : 0
Number of Days 60
With the above configuration in Define Automatic Credit control once released order should not go for credit block till further 60 days once it is released.
Can someone kindly share with me possibilities

hi subramanyam,
credit control will not accure, if you dont change anything intresting for the credit block.
Intresting means :
    - change of price
    - change of quantity
    - change of deliverydate ===> in my company that was the problem.
We did a useerexit - condition for new credit-block-checks.
In this userexit, you can decide, in which scenario you will suspend a additional check by saving your document for example while V_V2.
loock in customizing for chredit check in the first fields in the left upper sinde of the display - i guess to remember .
hans

Report for released orders from credit block

Dear Friends,
Can you tell me any report which can give us the list of released sales orders from credit block with user ID (who released) and date (when released). If no standard report is availble then please give me the table where this data gets stored, so that I can create a query.
Thanks in Advance,
Sreehari.

Dear Krishnan,
Thank you very much for your immediate response...................
With VBUK-CMGST (D) we can get the list of orders which were released from credit block, but I require the ID and Date (who released and when relaesed).
I hope my requirement is clear.
Thanks & Regards,
Sreehari.

Regarding work flow for credit block release in sales order

Dear Experts,
Kindly help me with work flow-
my scenario is if customers credit limit of 5000$ exceeds in sales order it should be blocked and notification should go to authorize person through simple mail to release this block.
for this i have done settings in out control i have used output type krml and determined partner as employee responsible to release block in customer master but mail is not triggered to authorized person for credit block and how i can create work flow for this so that authorized person should get notify for credit block as well he releases block also.
Regards
Supriya

Dear supriyaparimal,
Please find the below points to fix your issue.
1. Configure the out put determination by using the condition type KRML.(Hope oyu have done it already).
2.Maintain the condition records in VV11 for condition type "KRML"
3.Then select the condition record and click the communication tab .
4. If you want to give any information you can use "Note for recipient".
5. If the information has to be sent to relevant person you recipient name in the recipient column.
Save the documnet.
If you raise the sales order and if it is blocked then system automatically send the information to respective person.
You can get this in formation in ""SBWP" transaction code.
Check the in box, the information what you have mentioned in the condition records will be appeared.
Please let me know if you have any clarifications
Thanks&Regards
raghu.k

Which field shows me that, the Sales Order is under CREDIT BLOCK?

Hi Experts,
I know that, I can see weather the Sales Order is under Delivery block, by looking VBAK-LIFSK.
So, pls. let me know that, weather the Sales Order is under CREDIT BLOCK? which field, table telle me?
thanq

Hi,
Look for field CMGST in VBUK or
CRBLB check box in KNKK table.
thanks
Dan

How to restrict/hide the CREDIT BLOCK RELEASE LINK AT ITEM LEVEL of Servic

Hi,
We are using CRM2007 Stack 4.
In WEB UI Change Service Order screen for a credit service order which
is blocked for credit, at item level a link is available for release of
credit block. This link is currently accessible by all users.
Please advise us how to prevent users accessing this link for order
credit block release.
Regards
Achuthanandan

I am looking for this answer as well. Has this been answered or resolved?
Thank you,
Carolyn

Credit Block at order level

Hi Friends,
I have created a sales order with quantity of 10 and it went to credit block. I have released this doc and created a delivery for the qty 5 and PGIed. (dynamic credit check is activated)
Now i have added one more item to the order and released that document using VKM3 and if i try now to create a delivery, system gives a error message " order blocked for deliveryas a result of credit check".
I have released this order many times using VKM3 , but still i am getting the same error message " order blocked for delivery as a result of credit check", henc not able to create a delivery.
Can some one help me out on this.
Thanks & Regards,
Ashok S

Hi Friends,
1. At the time of creating a delivery I am getting this error. so how can we release a delivery without creating ..
Hi Raja,
After releasing the sales doc using VKM3, If I try creating a delivery using VL01N, then system will not give any error.
And also, if i go to VA03 (display mode ) and try to create a delivery from the sales doc (sales doc --> deliver), system not giving any error.
But If I go to VA02 and try to deliver from the sales doc (sales doc --> deliver), system GIVES AN ERROR.
One more observation is that Even after releasing the sales doc using VKM3, if I go to change mode of sales doc and comes back. then system automatically putting credit block to my sales doc. Can any one please give an idea why it is happening like that.
Thanks,
Ashok Sakamuri.
Edited by: Ashok Sakamuri on Jul 29, 2009 2:41 PM

Orders on credit block for multiple times

Released documents are unchecked is set up deviation of 5 % and no of days 30 in OVA8 and use static credit check.
customer is over the credit limit, when i create an order will go on credit block. After first release, if i change any other fields such as remove billing block, change customer po no is causing credit block an order.
Is this the standard way of working or did we miss any config?

Moderator message - Cross post locked
Rob

Orders on credit block multiple times

Released documents are unchecked is set up deviation of 5 % and no of days 30 in OVA8 and use static credit check.
customer is over the credit limit, when i create an order will go on credit block. After first release, if i change any other fields such as remove billing block, change customer po no is causing credit block an order.
Is this the standard way of working or did we miss any config?

Hi Priya,
You need to check your settings in OVA8 for the risk category assigned to credit account.
If you hv allowed the deviation just recheck whether change value is exceeding the deviation factor with respect to credit value.
Regards
Sanjay

How to hide pm shop paper keys in order which is not required.

Dear All,
I have created one b/d maintenance order which is released, now I have to take a print out of shop papers.
For this I have ref. following menu path through IW32 transaction
Order>Print>Order
Then one window will get pop up u201Cselect shop papersu201D in this window I can see various shop paper keys. I can see 12 shop paper keys.
From that list I need only 3 shop paper keysu2019 which is as follows, and only these 3 keys must be seen in that pop up.
2020               Material Issue Slip
2030               Job Ticket
2040               Pick List
So how I can hide remaining shop paper keyu2019s which is not required.
Thanks & Regards,
Sandeep

Hi,
Problem is solved by Defining Shop Papers for Order Type.
Thanks & Regards,
Sandeep

List of released sales orders which were blocked during credit management

If sales order is blocked during credit management, then it is released by Authorised person using VKM3 Tcode. Further if we want to see list of released documents, VKM2 shows the same. However VKM2 does not shows the released documents once that are billed (using VF01). Suppose post billing one wants to see how many orders were released during specific period, how it can be seen. Is there any transaction code to see such records.
Vijay

You can use V.23 to view the report. The report will show you what sales order is ready for release for billing.

Credit Block for released sales order

Dear All,
I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
Thanks and regards,
Vishi.

Dear Vishi
Please check if you have checked the critical fields option.
Credit check against critical fields (fixed value dates)
The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
Use
If a check is carried out, the following fields are relevant:
Payment terms
Additional value days
Fixed value date
Note
Use this type of check for sales documents only.

Credit block order which is release once

Similar Messages

Maybe you are looking for