Credit Blocked sales orders during MRP

Hi Team,
I don't want to create PR's during MRP, if the sales orders(Make to orders-sales orders) are under Credit Block/Hold.
Give your inputs !!
Thanks,
Kumar Arcot

As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
This means if you have blocked this customer in FD32; no delivery to be done
It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
Rgds

Similar Messages

Workflow in the releasing of Credit blocked sales orders.

Hi All,
My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
Suggestions are highly appreciated
Regards,
Kumar

Hi Kumar,
I think you can achieve this by using Authorization Concept.
Please find the below link
http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
Authorization levels for Credit Rep Groups
Thanks
Dasaradha
Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

Credit blocked sales order and shipping due list

Hello all,
We would like to see credit blocked sales order in the shipping due list (VL10C)
First we have modified a user exit to have schedule lines quantity confirmed even when the sales order is credit blocked. It works fine but still the schedule lines do not appear in the shipping due list.
Do you know some way to make this lines appear in the shipping due list ?
Thank you in advance.

hello, friend.
i believe that you can configure the system in such a way that even if a sales order is blocked for credit, the requirements will still be passed on to PP/MM. however, as long as the delivery block (for credit reasons) remain in the sales order, this order will not appear in delivery due list.
i have to ask you: if you want the blocked order to appear in delivery due list, why block the order at all? an alternative to listing orders still not delivered would be to use t-code VA05 or VA05N and specify 'open' orders.
hope this helped.
regards.

Credit blocked sales order in ECC

Is there a standard way to prevent a credit blocked sales order from flowing to APO, from ECC?
Thanks,
Satish

Hi Satish,
The only way to restrict an order line item to APO is to assign a reason for rejection to it..
The other way is to identify a credit block in ECC sales order out bound exit EXIT_SAPLCSLS_002 and delete the sales order in the CIF.
Regards
Vaibhav

MRP Run For Credit Blocked Sales Orders

Hi
Does any one know how to prevent the generation of planned orders for Sales orders which
have been credit blocked. At the moment the reservation is still visible on MD04 and is therefore
planned during the MRP run. As a result manufacturing continues for these sales orders.

As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
This means if you have blocked this customer in FD32; no delivery to be done
It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
Rgds

How to have confirmed quantity 0 for credit blocked sales orders

Hi!
I have the following problem. I have one sales order blocked because credit. Using material A the quantity confirmed is 0 but using other material B the quantity is confirmed. All the materials have no avaliability check group no arelevant for vailability .
How can I customize in order to always have quantity confirmed in 0 for sales orders bloked because credit check?
Thanks in advance for your help!
Regards,
Marina.

I resolved the issue

Credit Managment @ Sales Order

Dear Experts,
I have created sales order with which customer is holding credit management. Let say the customer credit limit 1000 RS. I have checked in FD32. After that i have created sales order with 300 rs and created delivery also. After that again i have checked the customer management status in FD32. Here order value supposed to come 300 rs right. but its not coming. After that created invoice then again checked customer management status in FD32 there receivables got 300 rs. Only things is when i created sales order and delivery (witout creation of invoice) in credit management status order value also has to come but its not coming. Its directly goes to receivables option in FD32. Could you please suggest me where i did mistake. Do we need to maintain that credit control area in Sales Order. If we need pls let me know. Bcoz i couldn't findout credit control area option in the sales order.
Thanks in advance,
VS

HI VS,
Please find below the explanation regarding updation of credit values to sales orders, deliveries & billing documents:
Update for sales orders:
The open sales order values are updated in the information structure
S066. When the credit value is calculated, the open schedule line
quantity (VBEPD-OLFMNG) is multiplied with the item credit price
(VBAP-CMPRE).
The open schedule line quantity is the confirmed quantity of the
schedule line that is still open for delivery.
The credit price is defined in accordance with the settings in the
pricing for the item.
The material availability date of the schedule line (VBEP-MBDAT) defines
the period in which the open sales order value is updated. You use
transaction OMO1 to define the period unit for the information
structures.
If an item has no confirmed quantity (VBEP-BMENG), the system does not
update an open sales order value.
This also occurs for documents that are blocked by the credit check. As
a result of the credit block, the confirmed quantities are deleted so
that an open sales order value can no longer be updated.
When sales orders with a credit block are released (for example, using
transaction VKM1), a new availability check is performed. If the
availability check can confirm the quantities, an open sales order value
is updated accordingly.
Conclusion: Credit blocked documents do not increase the open credit
values.
There are exceptions to these rules:
1. Sales order items which are not relevant for delivery and do not
    have schedule lines relevant for delivery are not updated to S066
    ('Open sales order credit value') rather to S067 ('Open delivery
     credit value'). You can find further information about this in Note
     361637. Also refer to Notes 120645 and 128350 concerning this topic.
2. You can use requirements to delete confirmed quantities in credit
     blocked sales orders. These requirements are defined in transaction
     VOFM under the menu path 'Requirements -> Subsequent functions ->
     ...'. The system asks you for a credit status in the respective user
     requirement. If this is set to 'Blocked', the system cancels the
     confirmed quantity. You may want the system to behave differently.
     If this is the case, you can store a separate requirement which does
     not cancel the confirmed quantity. As a result, the sales order item
     has a confirmed quantity again and consequently, it updates the open
     sales order value although the document is credit blocked.
     For NON-MRP materials (materials without requirements planning), the
     system does not cancel the confirmed quantity despite a
     corresponding condition, as described in Note 393304. For further
     information about this, refer to Notes 674112 and 914627.
3. A delivery block in the sales order affects the update of open
     credit values. For more information, see Note 741980.
Update for deliveries:
The open delivery values are updated in S067. The update does not occur
in time units. There is only one entry in S067 for each credit control
area and credit customer.
If you create a delivery with reference to a sales order, the system
clears the open sales order value in accordance with the delivery
quantity (from S066) and posts the open delivery value for the delivery
(to S067).
Deliveries with credit lock also write open values of goods to be
delivered. Here, it is not possible that a credit-blocked document does
not create an open credit value (as in the order). This is also correct
from a business view, because the delivery already blocks the goods, and
the value of the goods is therefore already consumed for the credit
customer.
Update for billing documents:
The open billing document values are also updated in S067. Also in this
case, only one entry exists for each credit control area and credit
customer.
If you create the billing document with reference to a preceding
document, the system clears the open credit value in accordance with the
invoiced quantity for the preceding document and posts the open billing
document value for the billing document (to S067).
If you transfer the billing document to accounting, the system clears
the open billing document value (from S067). Now the value has been
transferred to the open items and occurs as a receivable from the
viewpoint of credit management.
If the incoming payment occurs, the receivable is met and the
consumption of the credit limit is reduced.
Kind regards,
ALV Ramana

Automatically cr. block Sales Order once they reach within the Cr. Horizon

How to automatically credit block Sales order made outside the Cr. Horizon, once they reach into the Cr. horizon.
I have tried testing the same through Program RVKRED08, but it works for some orders if the Cr. horizon is maintained for 60days.
But does not block if the Cr. horizon is maintained for 30days.
Thanks in Advance

if you specify horizon date, the system consider al the values
which falls under this date. the system will not take into account if the values fall after the horizon date.
EX: if you specify horizon date 2 months. Then system consider the open values which falls with in two months. if
the value fall after the two months, the system ill not take into account.
If your horizion date is 30 days and shcedule line date is in 30 days, system will check credit managemnt and blocks or unblocks.

Automatic credit release of blocked Sales orders with pre payment

Hi ,
We have a requirement as given below.Please suggest a better solution for this.
The customers have the 'prepayment ' payment terms with different percentages of the sales order
value to be paid before the delivery creation.
When the sales orders are created, they are blocked for delivery by some credit block.
The business use VKM1 transaction to view these blocked orders and release them manually for
delivery creation after checking if the customer has made the prepayment.This is a tedious work
(since there are too many sales orders )for the credit manager who dont have the complete
visibility of how much prepayment the customer has made and need to manually check if the
payment made covers the sales order prepayment amount to be paid.
1. How can we do a automatic release of these blocked sales orders?
2. Is there any program(which can be setup as batch job) to do a credit recheck and release the order
automatically?
3. Will Milestone billing plan functionality satisfy this requirement?If so how?
We are using SAP version 4.7 without Project System.
Thanks in advance.
Regards,
Ragesh

Hello,
This is not possible because when you created the sales order it has checked the credit limit for that credit limit and if you increase also now that block cant go automatically.
Go to VA02 i.e change mode of sales order and change something and enter may be if you created a order for 2 quantity then go to VA02 and remove the quantity 2 and again type 2 then system will again check for credit and now that is increased so the order will not block..
If this is for many order then you can run changes sales order BAPI for mass update. Take help from ABAP guys.
Cheers
Say

Release log for blocked sales order as credit limit

Hi gurus,
Any body kindly explain for me about how can I look over Release log for credit limit block sales order, Transaction code or report?
thanks.

Hi,
u r trying all these in IDES system or in real time system.
if u r trying to release it in IDES system then go to VKM2 & do the changes.
in real time system only a authorized person can release the block by using the same T.code vkm2.
hope it helps u
regards
dibya

Credit block in orders

Hello experts,
How NOT to block a sale order as a result of credit management once the block is released.
Because of credit reasons, sale order is blocked. Then the credit manager releases the block. Then again, sales admin change the order that do not affect the value of the order. Now, the credit block is set again because of the change. The requirement is not to set the block if the order value does not increase during any type of change.
Will reward points for help.
UV

When a credit check is released it is considered good for the number of days in the "released documents still unchecked". This is a field on the OVA8 credit control screen. Generally this field comes blank which means the credit release is only good for 1 day. Any changes made after that 1 day go through a credit check again.
We had this happen on delivery notes and we decided to make them good for 7 days. So any changes within that 7 day period at the same value (with the exception of value increases) would not cause it to go on hold again. After the 7 days changes did go back on the credit hold listing.
See if you can use this field to your advantage!
Good Luck!
Debbie

Block the order from MRP

Hi Guru
We currently have credit blocks on a sales order - they are either a block 25 or a CR block.
But neither block actually blocks the order from MRP - we can still buy parts and manufacture.
Can you provide us with a block that we can use on orders that will stop them from processing until it is removed.
Thanks
Suresh
Edited by: sureshsdconsult on Dec 8, 2011 7:01 AM

Hi Suresh,
Here i have one doubt is "25" means
U can use credit block in sales order, either warning msg or error msg.
If u choice warning msg system show how much credit exceed only.
If u choice error msg, order can't process.

Block Sales order from production and shipping.

Hi Experts,
I have a requirement to block sales order from production and shipping if the credit limit of the customer is beyound the allowed value.
Also sales order should not show demand for production until it has been released.
Can someone throw light on how to acheive this?
Regards
Balu
Edited by: balu umapathy on Sep 13, 2010 6:39 AM
Moderator message: please work yourself first on your requirement, ask specific question later if required, always search before posting.
locked by: Thomas Zloch on Sep 13, 2010 1:10 PM

I will pass only the Prod Order as input. And I should get the Sales Order information... Very important is I need the schedule Line Number along with the Sales order and item.
To recap once again,
In MD04..or in BAPI MD_STOCK_REQUIREMENTS_LIST_API, I pass the input
WERKS - Plant Code
MATNR - Material Id
Output should be like this,
MRP element                                     MRP Element Data
PrdOrder                                           OrderNumber/OrderType
CusOrder                                          Salesorder/Item/ScheduleLine1
CusOrder                                          Salesorder/Item/ScheduleLine2
PrdOrder                                           OrderNumber/OrderType
so with the output, how can I find the Salesorder/Item/ScheduleLine for a particular prod order? I think I am clear with my question.

List of blocked sales orders

Dear Gurus,
Do we have any standard transactions to find list of blocked sales orders for different reason.I checked we have only for credit management the transaction code is :VKM3 & For back order processing we have transaction code : V_RA & can we use the same transaction codes for different kind of blocked sales orders for various reasons ( ex: Blocked for free of charge delivery , poor qualiy of goods ,political reasons , bottle necks etc reasons )
Looking for your inputs
Thanks inadvance
Regards
Venkat

Dear Venkat,
If I'm right the issue is that you want to display all those documents whose credit limit is zero.
You can get all the list through vkm3 and sort it in ascending order.
For sorting click the cursor on the credit value column and use sort buttons available in application tool bar.
Kindly let me know if it can solve your issue.
Best Regards,
Rajesh.

Help needed in blocked sales order list vkm1

Scenerio is that currently the sales coordination department views all blocked sales orders thru t-code VKM1
The company said they want sales coordination department to view ONLY the sales orders under the value of 300,000rs. (That value being flexible can be changed to 200,000 in the near future.)
They also want the finance department to also view credit (this being a filter search criteria) sales orders BUT ABOVE the value of 300,000rs (That value being flexible can be changed to 200,000 in the near future.) And have the right to release the orders. So in other words 2 different views for the two different departments.
What comes to my mind of a way to do this is by creating 2 query reports with a variant of a < less then, >greater then, or = equal too. And thru this query report I can assign the users to only be able to use that report hence, fi report, sd report view. But I am confused in how to begin and setting this up. Please help with any ideas and configuration tips. Which table or field to use in the query report for this?

Hi,
For this requirement, i would suggest 1.you design two separate layouts and
2.ask your basis consultant to assign this two layouts to the two set of departments so that one is authorised to use the first layout and the other department is authorised to use the second layout, please try this out and let me know.
I have checked the layout, there you cannot restrict a particular document value, instead design a user exit and use it for the two departments.
regards,
US
Edited by: usasapsd usasapsd on Mar 2, 2009 7:33 AM

Credit Blocked sales orders during MRP

Similar Messages

Maybe you are looking for