Credit check failure notification (11i)

Hi All,
I know there is notification send to the person who creates the SO whenever the SO goes on hold .
But our requirement is the notification should be sent to some other person who is actually authorized to release the hold.
We want to understand if there is a setup through which we can receive this credit check failure notification.
Regards
Gagan

Hi Gagan
As i know, there is no standard setup for notification like that. I think you can utilize Oracle Alert to do so but it need technical skill on it.
Rattina.

Similar Messages

  • Credit Check Failure not working as expected -- 11.5.10.2

    Hi,
    We have setup Credit Check calculation at Sales Order Header level.
    This is working as expected when the Sales order is Booked, Credit Check Failure hold is applied when its eligible.
    But if one the of lines belonging to a separate Ship set of Sales order is Shipped and Closed and other line is open.
    Any changes on the Lines that are Open is not placing the hold in the Sales Order.
    We need Credit Check Validation to happen any changes in the Price or Quantity of any SO line even if other lines are Shipped/Closed and the hold needs to be placed at Sales Order header.
    Any suggestions to change the setup or any other workaround on this would be appreciated?
    Thanks,
    Praveen

    1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
    has servral logs for OACoreGroup Servlets that are initialied
    2) You might have to enable the debug option in jserv.properties and jserv.conf
    (find IsItWorking.java in Metalink for the appropriate note )
    3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
    pls keep posted about how this issue got resolved.
    Sunil
    JSP not responding after installing 11.5.10.2 on IBM
    HACMP
    i have finished installing Oracle applications
    11.5.10.2 on IBM clusters (HACMP version 5.1)its a
    multinode setup with mutual failover. other
    applications are working fine. the installation went
    well. but the final part on the middle tier , during
    the post install checks it says JSP not responding. I
    checked the apache error-log and saw the follwoing
    entry
    [Sun Apr 23 21:04:21 2006] [error] [client
    172.29.200.74] client denied by server configuration:
    /appl/oracle/devcomn/portal/
    DEV_erpappssrv/oprocmgr-service
    >
    that bafles me because that ip address was not used
    in the installation. its the persistent ip address of
    the HACMP. the service ip that was used in the
    configuration file was 172.29.200.75
    however there is no mention of this in the error
    log.i also edited the oprocmgr.conf in the
    Apache/conf directory after which i dont get the
    error however the servlets pages then hangs and
    returns page cannot be displayed error on internet
    explorer. no error is registered on the error log.
    the jdk am using is 1.4.2 which is the recommended
    one.
    what this means is that i cannot access the self
    service pages and as you know you need self service
    pages to access the application in 11.5.10.2
    i opened a TAR with oracle on 8th April 2006 and till
    today i have not been able to get a solution.
    I am hoping that i will get someone in this forum who
    has met a similar problem or who has an insight into
    how we can solve this problem already am weeks past
    the target go live!!!
    Please Kindly help
    Jeremiah Ochieng

  • R12.1.3 receivables - Credit Check Failure Issue

    Hello,
    We have few customers who have Credit Limit setup at customer level.  These customers do not have credit limit set up at site levels. Or, in other words, the site level profile does not exist.
    For e.g. a customer has following credit limits.
    Customer Credit Limit: $7500.00
    Order Credit Limit:  $7500.00
    Note that both types of credit limit has the same amount.
    Now the problem is this: when entering and booking a Sales Order in Order Management,  It does not apply any Credit Check Failure hold.   Even if the Order amount for just one sales order exceeds  $7500, it does NOT apply any credit check failure hold.
    Same is the problem with Customer Credit limit.  If there are 5 sales orders for a given customer and their grand total is exceeding  $7500.00 it does NOT apply any credit check failure hold.
    Has any one encountered this issue?  What is causing this?  What am I missing?  Please advise.
    Darsh

    Hi Darsh,
    Hope you have done the following...
    1) On the Profile: Transaction Tab, ensure the credit check box is checked
    2) On the payment terms aswell, ensure the credit check box is checked
    3) if you are using any multi currency..make sure the currency is specified at customer profile with amount limits..
    Thanks
    -Arif.

  • How oracle standard Credit Check considers amounts

    Hi All,
    We have an order, as per our calculations it should get booked successfully. But a credit check failure hold is placed on that order. We consider the booked orders (booked and shipped quantities), outstanding RA balances (from ra_payment_schedules_all table) to derive the available credit limit for a particular customer.
    Any body please explain how Standard Credit Check works, what are the various sources that a credit check searches for amounts to derive whether the order amount exceeds the limit or not.
    Thanks in advance.
    Regards,
    Chaitanya.

    Hello,
    I think you set credit check rule. Did you set Use pre-calculated exposure?
    When SO is going hold you have message. In this message you have reason why credit check rules applied hold.
    Regards,
    Luko

  • PO Failure notification not triggering via Outlook

    Hello Experts,
    We are using SRM 7.O SP05, When PO is created and by mistake user Input the wrong Email address in Header --> Out put. The user is not getting the failure notification Via Out Look. I can able to find the Error message entry in SOST. I have checked the sender Email address also is correct. (in SU01).
    I tried to replicate the same kind of scenario in Q environment. But no failure notification received via Outlook. Is there any setting need to be done.
    Kindly help me to resolved this issue.
    Regards,
    Suneel Kumar

    Hi Rick
    what tcode i'm going to use to check this event container?
    can help me step by step because i'm not fully familiar to this flow..
    i check tcode SO16 under Mail sy.grp i check the send to home addresses of users
    i test it again in SAP inbox i receive notification under workflow for PO release there's also notification coming to outlook the message is:
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS20000075
    Following error occurred:
    SWF_RUN 594
    Message text:
    Import container contains errors (are any obligatory elements missing?)
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    instead of for PO releases, how come different notification sending out?
    thanks.
    Edited by: Marina_25 on Apr 15, 2010 5:16 AM

  • SO_OBJECT_SEND - Email failure notification

    Hi all,
    I have an issue with Email failure notification. The requirement is if an email is not delivered to the receiver, I need a failure notification to some alias so that the original email can be re send.
    The function module used to send email is ‘SO_OBJECT_SEND’.
    Any pointers on this would be helpful.

    Hi,
    Check this link. related to receipt notification. (But i am using CL_BCS class)
    May this will help you.
    a®

  • I'm getting mail delivery failure notifications quoting email addresses I don't recognize. Is someone using my server identity?

    Hi. I've been getting several email delivery failure notifications recently. I don't recognize the email addresses quoted. Is it possible that someone has hacked into my mail account?

    Either that, or someone is forging your reply address on mail that wasn't sent from your account at all. To tell the difference, you would have to log into your mail account on the Web and check for unusual activity.

  • Itunes accounts for credit checks?

    can someone from the US answer this for me - say i fail the credit check for the phone, could i then use my girlfriends itunes account and set up the phone in her name. did it give that option? or did it just say failed and offer pre pay.

    hi,
    i seen this on the o2 website under the FAQ's on the iPhone section
    *What happens if I fail the credit check?*
    If you do not pass the credit check, you will not be able to activate your iPhone. You'll need to return the iPhone in as new condition with all the original packaging and accessories to the original point of purchase, with proof of purchase and the email confirming activation failure within 14 days of receipt for a full refund.

  • Credit Check with Third Party Process

    Hi Gurz,
    I know about third party process but my problem is with credit check of the customers.
    If customer has not got enough credit limit to process the order in normal senario credit controller has to manually release the order as system blocks it. In third party process system will give you warning message when saving sales order about customer credit limit but allows you to save sales order. Once saving sales order it authomatically creates Purchase Requisition. From PR purchasing creates P.O. with out knowing about customer credit limit issue. and so on. In other words goods supplied to customer even though credit limit has exceeded. This user don't know untill raising the invoice to the customer which is too late.
    Can we stop creating Purchase requisition or block purchase requistion for credit check ? or there are better way of handling the process for credit check?
    Thanks in advance

    Hi,
    Try to implement OSS note -738171 - Delivery block does not influence purchase requisition.
    Following is the details of the note;
    Summary
    Symptom
    The delivery block in a sales order does not prevent the generattion of the purchase requisition in a third-party or individual purchase order item. Regardless of the Customizing settings in the delivery block, the system confirms the TAB or TAS item and generates the purchase requisition.
    More Terms
    Order, purchase requisition, PReq, TAB, individual purchase order, individual purchase order item, TAS, third-party, third-party item, SD order, delivery block, VBAK-LIFSK, VBEP-LIFSP
    Cause and Prerequisites
    Solution
    Create a user-specific user requirement (for example, 902: BEDINGUNG_PRUEFEN_902 in Include LV07A902) as a copy of standard user requirement 102 and assign it to requirement 'Preq' by using Transaction OVB5.
    In the source code of the user-requirement, program a check for the delivery block which, if necessary, triggers an ERROR_EXCEPTION which prevents the generation of the purchase requisition.
    You can use the existing check for the credit block as a template.
    Regards,

  • Credit check for existing Verizon customer

    Hello!  I am looking for some assistance.  I recently received an email from BB about a 2500 point Reward Zone bonus for buying a new phone w/ a two year plan.  I am currently on my mother-in-law's family plan but due for an upgrade.  After going through all the checkout steps, I was met with a request for a credit check for my mother-in-law.  This makes little sense to me, as we have been Verizon customers for years and have a total of four accounts with them under this plan.  If we are longstanding customers with Verizon, why does Best Buy claim Verizon needs to do a credit check?  I know one wouldn't be necessary if we were to go to an authorized Verizon dealer for this purchase.  So how can BB claim the check isn't for themselves when Verizon already has no issue with the account's credit?
    I would love the bonus points but I'm not about to dent my mom-in-law's credit with a credit check.  It sours me on ever going through Best Buy for any mobile service in the future.  If Verizon is fine with the account and the current credit status, why does BB force one on us while claiming it's for a company that alreayd has no issue with the account holder's credit score?

    All credit checks are done through the carrier. Verizon does periodically request updated an credit report, even when performing an upgrade. This same process would take place no matter where you get your phone -- Best Buy, Verizon corporate stores, or other third-party dealers.
    Dan K. | Mobile Specialty Stores
    Any opinions expressed in this post are those of
    the author and do not represent Best Buy Co., Inc.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Credit Check againt letter of credit.

    hi,
    This is regarding credit check of sales order against FD. If the letter of credit belongs to company 001 and sales order contains any line items materials other than company 001. It gives an error EI574 "Financial Doc data check result not ok". Is there any way to do credit check ignoring company? I mean financial document will be in one company but sales order items can be from multiple company. Please share your expertise.
    Regards
    Achuthanandan

    Hi Achuthanandan,
    if the credit control area is assigned at company code level then this error will appear
    if the credit control area is assigned at the sales area level then this error will not come
    Regards,
    Santosh

  • Open sales order value for credit check need to be changed (S066)

    Hi all,
    I need to change open sales order value which is already there in S066 table.
    Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
    Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
    When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
    Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
    Please advise me.
    Regards,
    Babu
    Edited by: babs on May 19, 2010 4:26 PM

    Hi Babs,
    If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
    If you want to modify the value then follow the below process.
    Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
    I hope it will help.
    Regards,
    SK

  • Credit Management: Difference Between Static and Dynamic Credit Check

    Hi,
    Could anyone tell the difference Between Static and Dynamic Credit Check?
    According to website: http://www.sap-basis-abap.com/sd/difference-between-static-and-dynamic-credit-check.htm ... this is the answer:
    ====================
    Simple Credit Check : Tr.Code - FD32
    It Considers the Doc.Value + Open Items.
    Doc.Value : Sales Order Has been saved but not delivered
    Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
    Static Credit Check it checks all these doc value & check with the credit limit
    1) Open Doc.Value / Sales Order Value : Which is save but not delievered
    2) Open Delivery Doc.Value : Which is delivered but not billed
    3) Open Billing Doc.Value : Which is billed but not posted to FI
    4) Open Item : Which is transfered to FI but not received from the customer.
    Dynamic Credit Check         1) Open Doc
                                                2) Open Delivery
                                                3) Open Billing
                                                4) Open Items
                                                5) Horizon Period = Eg.3Months
    Here the System will not consider the above 1, 2, 3 & 4 values for the lost 3 months.    
    ====================
    Question 1: Could you further explain the above information, if there is any?
    Question 2:: What is the Tcode to customize settings of:
    a) Simple Credit Check (isn't this same with b) below?)
    b) Static Credit Check
    c) Dynamic Credit Check

    Hi Tanish,
    Diff between Static and Dynamic Filters.
    Example One at report Level.
    Create a variable for a Infoobject say ,Material .
    1)In the Query Designer and if u restrict it to some 10 materials at query level, the report will display for only those 10 materials only.This is Static Filter.UR AHrdcoding it to those materials.You cant change them at Query Run time.i.e not changeable by user.
    2)If u give the variable as input ,and when u run the query ,u can can choose the material,may 10 may be 1 or may 20 .It is dynamic.Changeable by user at run time
    Example Two at DTP and Start Routine Level,say Document Type.
    1)If u give filters in Start routine it is Static as u cannot change it in Production,not changeable by user.
    2)f u give filters in DTP it is Dyanamic as u can change it in Production.U can give any doc type,Changeable by user at run time.
    Hope it is Understood.
    Rgds
    SVU

  • Expired Scheduling Agreements still in Credit Check / Rescheduling

    Hello everyone,
    I am running into an issue with expired Scheduling Agreements on the SD side (VA31,VA32, etc.).  There are many Scheduling Agreements that expired on a range of dates from 2005 to 2009, SA's that customers will not send JIT delivery schedules for anymore and are basically just out in the open and unused.  The issue is that these Scheduling Agreements are still being taken into account when a credit check is run.  Additionally, when our rescheduling jobs run at off-hour times, the system is still attempting to allocate materials to these orders.  The main problem with this is that it causes additional processing time for the rescheduling job.
    The current business process for these old Scheduling Agreements is to reject all the line items within the applicable SA, and as a result our rescheduling jobs avoid these orders, and they do not show up in VKM4.  However, the Valid To date in the SA is clearly in the past and I'm wondering if there is a way to have these closed without having to reject every line item.
    Any help would be greatly appreciated.

    Andy
    For credit check I would recommend:
    1) Using your own routine to exclude expired sch agreements in OVA8- Document controlling- 'No credit check' field.
    2)  rejecting at header level/ using "mass'.
    For Rescheduling
    1) Using button "Unconfirmed documents required" checked.
    2) Creating your own copy of the program SDV03V02  including document number, document type in the selection fields and creating a variant excluding specific, expired Sch Agreements. To reduce processing time, you may also try the 'divide and rule' policy and  execute several parallel/serial runs by using ranges of materials, plants, document types. I am sure you might have already tried this.
    Hope this helps.

Maybe you are looking for