Credit check for existing Verizon customer

Hello!  I am looking for some assistance.  I recently received an email from BB about a 2500 point Reward Zone bonus for buying a new phone w/ a two year plan.  I am currently on my mother-in-law's family plan but due for an upgrade.  After going through all the checkout steps, I was met with a request for a credit check for my mother-in-law.  This makes little sense to me, as we have been Verizon customers for years and have a total of four accounts with them under this plan.  If we are longstanding customers with Verizon, why does Best Buy claim Verizon needs to do a credit check?  I know one wouldn't be necessary if we were to go to an authorized Verizon dealer for this purchase.  So how can BB claim the check isn't for themselves when Verizon already has no issue with the account's credit?
I would love the bonus points but I'm not about to dent my mom-in-law's credit with a credit check.  It sours me on ever going through Best Buy for any mobile service in the future.  If Verizon is fine with the account and the current credit status, why does BB force one on us while claiming it's for a company that alreayd has no issue with the account holder's credit score?

All credit checks are done through the carrier. Verizon does periodically request updated an credit report, even when performing an upgrade. This same process would take place no matter where you get your phone -- Best Buy, Verizon corporate stores, or other third-party dealers.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc.

Similar Messages

  • Simple credit check for service orders(TAD)

    hi
    we have configured simple credit check for ZOR and with delivery block. since TAD is order related billing even though credit limit exceeds they can bill the customer.Now I have to configure simple credit check for serive orders with item category TAD and it should give billing block.please give me the details on this.

    Hello Chait
    To release credit block from CRM GUI, please go to header status tab here is the button 'Credit Release'.
    To release credit block in WEBUI, please check the items block, in more functions you can find the 'release credit block' link.
    Best regards,
    Maggie

  • FSCM-Credit limit for group of customer

    Hi all,
        Please advised how to set up in FSCM-CR for the following scenario.
        I would like to set up credit limit for a group of customer. such as BP A is subsidiary of BP B.
        BP B have credit limit 100,000 USD. BP A have no credit limit, but using  credit limit of BP A.
        I known in SD-credit, we can set up credit account of customer A in FD32 equal to customer B.
    Regards,
    Jenny

    Hi Jenny,
    'Credit account' concept in FD32 acts as credit delegation to parent account.
    - this delegation turned out to be simple tool, but vulnerable to hedge group-wide credit risk.
    In FSCM version, SAP has strengthen this 'week form' of risk management, which sometime has troubled us.
    FSCM has two kinds of credit control models for group-level credit control;
    one is main/sub model and another is business partner relationship 
    Suppose you prefer to 'business partner relationship model'.
    * Scenario and expected result;
    'business partner relationship model' is different from 'credit account' concept, in that it both credit- checks for 'BP A' and 'BP B'. However, I guess that you could achieve goal if you set as below; 
    firstly, map BP A and BP B as business partner relationship
    (BP A is lower, BP B is higher)
    Secondly, assign to different risk category; BP A to no risk category, BP B to high risk category
    (I supposed both A and B has same CCA(credit segment))
    Thirdly, maintain 'OVA8'(Define Automatic Credit Control) differently
    eg. no risk category => no message, high risk category => error message
    wish your test and verification.
    Best regards,
    TED

  • Credit check for sales order creation using BAPI

    HI,
    I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating sales order.
    I want the credit check for a customers credit limit done while creating the sales order. Is it possible to make
    credit check with above bapi? If it is possible please give me the solution.
    <b>Helpful answers will be rewarded</b>

    hi,
    it's the same code that is executed for the credit check in the bapi as in va01
    If you put in the correct data, see sap note 366265, the credit check will be executed
    kind regards
    Paul Q

  • Credit limits for the same Customer for different countries.

    Hi SAP Gurus,
    A customer belongs to 2 different countries, the credit limits are maintained  in FD32 for one country.
    But basing on the "country" the credit limits should change for the same customer.
    So how we need to handle FD32 in this scenario. Is there any option to maintain credit limits basing on the "Country"?
    Thanks and Regards
    Sunil
    Edited by: Sunil.kds on May 27, 2011 9:37 AM

    Hi ,
         sales area wise , you can differentiate the credit limit . In this case , you can have one more credit control area and assign it to new sales area. it the same customer comes under diff country , extend the customer  to the new sales area . By doing so, you can have 2 credit limits for the same customer.
    With Regards
    S.Siva

  • Checking for existing Rollback Segments

    Hello you all,
    Is there a possibility to check for existing rollback segments within procedures?
    Thanks
    Hans

    Hello
    If you just want to be able to find out what rollback segments there are, you can query dba_rollback_segs, which will give you all sorts of info about rollback segments.
    Is that what you need or is it more involved?
    David

  • Hello, I have already bought FIFA 14 unlock pack.But now I've installed on my iPod and make check for existing purshase and it happen ''The Apple ID you entered couldn't be found or your password was incorrect.'' What that means?

    Please help me

    What do you mean by ""make check for existing purchase and it happens (error message)."
    Just what are yo doing when yo get that error message?

  • Over due items are not considered in credit check for customer

    Hi Gurus;
    We have static credit active for the sales order which is blocking  if the  sales value is more than the customer credit balance   but it is not checking for over due item i.e the billing document  whose accounting document  hasn't been cleared yet .Though i have maintained same number days for payment terms and risk category  for the customer .
    Kindly guide me if have missed out any configuration or setting .
    Thanks in advance .

    Hi Nuru,
    Hope you are using automatic credit check and not simple crdit check ..Check that.
    Is ur update group a standard one..?
    Please paste screenshots of FD33, credit status, OVA8 etc.
    Regards
    Jobi

  • Credit Check for "Not Relevant" sales order items

    Hello All,
    I am having a situation where my client takes advance reservations almost an year in advance.
    The sales order items have schedule line category to not consume inventory and so the overall status on each line item is "not relevant". The credit status on the order is "not performed". Since the overall status is "not relevant", the sales order amount is not added to the credit master receivables.
    We have around 100K orders and I am trying to see if there is a good solution to do a credit check on all these orders.
    I am in a desperate situation and would really appreciate a quick response.
    Thanks very much for your help.
    AM

    Hi Shiva Ram,
    Thanks very much for your reply.
    When I change the schedule line category on the items, the overall status on the line item changes to "Open". The credit status of the order will be "not performed".
    If I were to create an advance order with items consuming inventory, it goes through a credit check with the existing configuration.
    AM

  • Credit check for the first sales order

    Friends,
    We are using dynamic crdit check.
    we set credit limit for Rs 100000. Now when I am creating first sales order for Rs. 500000, system allow to do it.
    Practically it should not allow to do it. How to handle this? please help.
    Thanks

    Dear Pratap,
    Enusre that in OVAK, you have the check credit as D and the credit group as 01.
    The credit check will be either static or dyanmic based on which indicator you are choosing in the transaction OVA8.
    Open order:Orders which are not delivered and relevant for credit check.
    Open delivery: Delivery which is not invoiced and relevant for credit check.
    Open billing doc: Invoice to which accounting document is not genereated yet in the system.
    Open Items: Accounting documents which are due from the customer, and cleared in the system yet.
    These are all the basic definitions to explain the difference between static and dynamic check.
    The difference between the static and dynamic check is as below.
    In case of static check, all the open order, open delivery, open billing document, opn item will be considered during the credit check.
    In case of dynamic check, you will be specifying the HORIZON period which will restrict the open orders to be considered for a certain period.
    That is to say, if you keep the HORIZON as 2 M, then the orders which are due for delivery beyond 2 months will be ignored; remaining open orders, open delivery, open billing document, open itms will be taken into consideration as it is.
    If you don't use the HORIZON period, I would suggest you to activate the indicator STATIC rather than dynamic. Hope this clarifies.
    Please do revert if need any more clarification.
    thank you
    Venkatesh SP

  • How to maintain two credit limits for the same customer.

    We have two lines of business for the same company code. One customer is trading in two lines of business.
    We want to maintain two credit limits for same customer. How is this possible.

    Hi,
    Credit Limits are assigned to customer master in a credit control area, so a customer can have different credit limits for the different credit control areas.
    (Please note that Credit Control Areas are normally assigned to company codes or sales area.)
    But if you are having only one credit control area, then only one credit limit can apply.
    However you can use the user exits to put any check you want for the customer. There are various user exits available for it like LVKMPTZZ,LVKMPFZ1,LVKMPFZ2 and LVKMPFZ3 in transaction SMOD
    Regards,
    Gaurav

  • Report this postReply with quote Credit check for unconfirmed item

    Hello,
    I have configured automatic credit control for sales orders.
    When a confirmed order quantity is entered, I get a warning message plus the credit block, just as I need. If I have no confirmed quantity of the items, I get no message, just a saved order.
    Our item confirmation is done only on what is in stock, not on RLT, so it is common that an item has 0 confirmation. I need a credit block if the value would otherwise exceed the open credit limit? How can I do this? I've tried both the static and dynamic checks, but they only work with confirmed quantities.
    Thanks

    pricing:
       step  Des                      From     print     subtotal
       120   Total                                   X        1
       130   Credit value           120         X        A
    and also in automatic credit control select open orders
    but system calculate the credit value=confirmed quantity*price.

  • Credit check for delivery

    Hi, I met some issues need your help!
    Currently, I have set the credit limit check at delivery level.and the reaction status is B(error message)
    and define a table Z_LOG for record the relevant infomation by user-exit.
    1. Create sales order with VA01, and write down the relevant information into Z_LOG.
    2. Create delivery with VL01N. if this document has exceed the limit value,The system will appears an error
    message and failed to create. but I want to record this error message into Z_LOG base on the
    sales document. Have any user-exit  to solve this problem?? Thanks a lot!
    The structure of Z_LOG as below.
    SO,  SOItem,  Material, Q'ty, Delivery, Delivery Item. Error.

    Hi
    Please check if you have assigned the credit group to delivery document and respective credit checks are maintained in Automatic credit check with the credit group used to delivery. Also check the static and dynamic check are ticked according to your requirement and ticked in block as well.
    If still you are facing the problem please check FD32 and check if proper delivery cost is excuted when you create delivies and the credit limit get used. In short check your info structures are properly updated.

  • Order Credit Check for the Dealer

    Dear
    While Creating delivery from The Sale Order , The Order is blocked due to credit Check
    But Ther dealer is having Least Amount balance, we want to create Delivery For The Avail amount Based on material Wise .In The Order Header status , Credit Check has been updated, we want 2 know which table/ field is updated, when i try to get  The field thru F1 help , its found a structure (Description )
    Structure name is VBSTT-CMGST_BEZ
    I need a Table name / where the description like approved/ released get Saved.
    Thanks in Advance .

    Check the table: VBUP
    fields : CMPPI,
               LFSTA

  • Repeat credit checking for released sales orders

    Hi,
    We are implementing FSCM Credit management in our project. In our system, when the sales order is created, the credit check will happen and the failed orders will go to VKM1. Till the order is released, any change to that order will trigger the credit checking process.
    But once the credit block is released in VKM1, Credit checking is triggering only for
    Quantity change
    Adding new line items
    Credit checking is not triggering for any other changes to the SO like deleting the line item changing the payment terms etc..
    I would like to know if there is any control in FSCM Credit management to repeat the credit checking process for the released sales orders.
    Appreciate any help in this regard.
    Thanks
    Prabhakar

    Hi Prabhakar,
    Navigate to Financial Supply Chain Management--> Credit Management--> Integration with sales and distribution-->define automatic credit control.
    Over there you need to check critical fields check box for this to happen. Hope this helps

Maybe you are looking for