Credit Check is not working while creation of the delivery

Hi,
Credit check is not performing while creation of the delivery.
As per current settings, there is no credit check at SO level. Ideally, system should show an error message while creation of the delivery if credit limit of the customer is exceeds.
Below is the current OVA8 setting for Delivery group 02.
It was working fine till last week, but due to some unknown changes in customization or master data, same is not working now.
Could you please check below settings and suggest if any setting is wrong?

You talking about the reaction field D am talking about beside to reaction field that is status/Block(check) .
Status/Block(tick) is used to block the document.
Where as you reaction field is used to give the either warning or error message based input you are giving
A and C gives warning message and allow to save the document.
B and D gives error message and will not allow to proceed further
Please check this and try system will block the delivery.
thanks,
Srinu.
Message was edited by: Srinu S

Similar Messages

Capacity check is not working while creation of Production order

HI Gurus,
I want to restict the system that in case of insufficient capacity at the work centers, sysstem should not create the production order. For that i did the setting
1) Unchecked the tick for the Capacity check & enter the profile SAPSFCG013 in the OPJK for the business functions 1 & 2.& also make the setting for the Release order '3".
2) Maintain the same profile in the production profile & maintain that profile in the Mat Master
3) In the CR02, activate the tick for the finite scheduling & uncheck for the can used for several operations.
But i have creted the production orders & at the time of capacity check system is giving the message " Capacity avaiolable at all the work centers. But i check in the CM50, all the work centers are overloaded at the respective date.
But i can create & release the p[orduction order.
Requesting all to give your comments & solutions.
Regards
ACP

ACP,
....after confirming all the operations system is allowing me to save
When you confirm an order, you are by definition saying that the capacity existed for that order (you have just declared to the system that all operatons have been performed, and therefore all capacity was available). I can't imagine why you would not wish to save that order, since you must somehow post the physical work that has already been done. Capacity availability check is really only useful when the order to be checked has not yet been executed.
CM50 displays capacity requirements. CM50 does not perform the same function as Capacity availability check. To ensure that all of your orders fall within you capacity constraints, you must perform capacity levelling. Capacity availability check does not work the same as a Material availability check - don't assume that what you know about a material ATP will be applicable for a capacity ATP. Read the help on Capacity levelling. It is not generally possible to stop a manually created production order from being saved, due to any capacity situation, without using an enhancement.
http://help.sap.com/saphelp_erp60/helpdata/en/60/13e308133a11d3bf550000e83235ee/frameset.htm
Naturally, you can use enhancements to have the system meet any business requirement that is not met with the standard Cap Availability check.
Best regards,
DB49

How to create a pop up window while creation of the delivery note.

Hello Experts
How to create a pop up window while creation of the delivery note.
As soon as we go in to delivery note creation screen in VL01N, immediately a pop up screen should be displayed on the screen containing the following details,
For e.g.
Str. Loc     Qty      UOM
DE01        100        KG
DE99          50        KG

Dear all,
i m having two document numbers for invoic of same types such as output type print program and smartform.
biut the issue is im getting print preview for one invoic and for another invoic i m not getting any print preview.
Directly the cursor comes to initial stage of vf03.
suggest what to do
Thanks and regarnds
ravi

Credit Check Failure not working as expected -- 11.5.10.2

Hi,
We have setup Credit Check calculation at Sales Order Header level.
This is working as expected when the Sales order is Booked, Credit Check Failure hold is applied when its eligible.
But if one the of lines belonging to a separate Ship set of Sales order is Shipped and Closed and other line is open.
Any changes on the Lines that are Open is not placing the hold in the Sales Order.
We need Credit Check Validation to happen any changes in the Price or Quantity of any SO line even if other lines are Shipped/Closed and the hold needs to be placed at Sales Order header.
Any suggestions to change the setup or any other workaround on this would be appreciated?
Thanks,
Praveen

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Mozillar Firefox Plugin Check & Updates not working in version 26 or version 28

My desktop operating system is Windows XP SP3. I had updated to Firefox version 28, but due to Bug 985968 I uninstalled the same and reinstalled version 26 manually. Now https://www.mozilla.org/en-US/plugincheck/ does not work while going to the same via Add-ons Manager under Tools. It just keeps searching & searching and wasting a lot of time. Starting Google is also very, very, slow. Very, very frustrating. Firefox is set as my default browser.

Hello gspal, for me it is better to upgrade to latest firefox version (28.0), and forget the [https://bugzilla.mozilla.org/show_bug.cgi?id=985968 Bug 985968], it is only the Java plugin with the error when you check with [https://www.mozilla.org/plugincheck/ plugincheck], we all have the same issue till the bug is fixed. But think, that 26.0 firefox is vulnerable now and in the newest firefox [https://bugzilla.mozilla.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&f1=target_milestone&f2=cf_status_firefox28&f3=target_milestone&j_top=OR&o1=anywords&o2=anywords&o3=equals&query_format=advanced&resolution=FIXED&v1=mozilla28&v2=fixed%2Cverified&v3=Firefox%2028&order=bug_id&limit=0 most bugs from 26 and 27 versions are fixed].
thank you

Spell Checker is not working although it's enabled in the Settings and I've already installed the dictionary

I'm using the 3.6.10 version of firefox
Mac OSX 10.5.8
the spell checker is not working correctly although all the settings needed are correct,
the dictionary's installed, the Spell checking is enabled from the “Browsing” section of “General” tab under “Advanced” heading .
but still it only underlines the misspelld words without giving me the probabilities of the right word .
this problem started to appear after I updated my browser version .
additionaly there is no "Add dictionary" or anything related to spell checking when I right-click the writing area .

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Hp split x2 touchscreen not working while un-docking

hello hp support, i've recently bought a hp split x2 13-110dx. my touchscreen stops working whenever i detach the screen (tablet) from the keyboard (docking station). if i try to safely remove "Docking Station", first nothing happens and then after about 10 seconds all controls (touchscreen and touchpad) othen the keyboard itself stops responding. a reset allways solves this problem but that means that now i allways have to reset after every undocking. also, if the tablet is working fine, and i dock the tablet, again the touckscreen stops responding (again, reset required) i have done a hard (full) shutdown.i have installed all microsoft updates (i am running win8, not 8.1). what to do?sincerely,matan leilien

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Split x2 Touchscreen and issues with the touchscreen not working while removed from the dock. Here is a document to troubleshoot the TouchScreen. The section you need is the TouchScreen responds inaccurately.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Hope this helps. Thanks.

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

I am unable to Save the "Note" field while Creation of new Contact

Hi ,
I am unable to save the Note field while Creation of Contact in Web UI.
Its happening in the Dev system but not in the QA Web UI.
I have tried to debug the component BP_CONT, But no use.
Can any one tell me the what could be the problem?
Regards,
DN

Hi DN,
The Notes part comes from the following view:
BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
You can debug in this view.
It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
Regards,
Shiromani

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

Iphone 6 plus fingerprint is not working while charging

My iphone 6 plus fingerprint scan is not working while charging. Is this normal?
I tried my iphone 5s and it works just fine even while charging.

I think I got an answer to my own question
If you're using generic lightning cable (non-original lighting cable), the fingerprint scan doesn't work while charging.
I just find it weird as my iphone 5s works even if i'm not using the original lightning cable though.

Check Button Not Working on Portal for BI report

We have Vendor account group variable when I enter any random value and click on check its not working its not giving message as ' Invalid Input' on Portal ( Variable is single input optional variable) same Check Button Working in RSRT .
And For all other Infoobjects ( Plant , Profit center) check Buitton is working on Port as well in RSRT.
Please suggest.

done

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

TS1741 Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

Hi JenJen73,
If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
- Brenden

Credit Check is not working while creation of the delivery

Similar Messages

Maybe you are looking for