Credit cntrl area field not appearing in CMR

Hi everybody,
May I know the reason for the non appearance of Credit Control area filed under billing tab of customer master record?
Bcoz of this the credit management is not happening...
Thanks in Advance and Good day!

hello Aravinda,
Plz check the foll. menu path
Plz check the config settings for a/c grp in SPRO>Fin Accounting>A/c rcvables and payable>Customer Acnts>Master Data-->Prp for Creating customer Master data.
check the customer a/c 0001 for customer master.
Here, the Credit Cntrl Area would've been supprssed.Check this, and change accordingly.
Reward, if helpful.
Rgds,.
Raghu.

Similar Messages

Credit control area field not appearing in XD02

Hi
In my ZDOM customer account group, i have made credit control field as mandatory. Hence it appears in sales area data when i create customer (i.e. XD01).
When i do XD02 (to change credit control area), credit control area is getting hidden. Its not appearing in XD02. Please help

Hi Meenu,
You will have to use T code OB20 here in order to make the Credit Control Area field visible in T code XD02.
The only problem here is that when you make the field Credit Control Area visible in T code XD02 using T code OB20, it will be visible for all account groups, not only for account group ZDOM.
Please check this out.
Thanks and Regards,
J Nagesh

Credit Control area field not appearing in FBCJ

Hi
I got some amount in cash (advance from customer). Since i got cash, my requirement is that my credit should be increased with that amount.
It works perfectly fine when i get advance in bank. Its because there is field for entering sales credit area in F-29 (advance from customer). But there is no credit control area field in FBCJ (cash journal).
I checked layout also (where i can make fields visible / invisible at the time of posting FBCJ entry). But that field is not there.
Please help

Hi Deepak:
We had a similar requirement while we were going through organization restructuring. We made KKBER (Credit control area) parallel to product division in SD and were planning to book all collections with respect to KKBER but FBCJ was the main hindrance in doing so. We raised an OSS note and their reply was as
Dear Customer:
My understanding is that you want to enter "Credit Control Area" during
FBCJ. I am sorry it is not support by standard program. We received
several same cases from other customer and develper replied as below:
There are two ways through which this is possible. But both are in
combination with a modification.
1. If rules are definite and no manual input is necessary customer can
use a substitution at point 2.
But note that fields BSEG-KKBER is not free to substitute in
standard.
This could be changed - but it is a modification.
Therefore please take a look at note 842318 under 2. b).
2. The other way is to enhance the table 'TCJ_POSITIONS' and the Dynpros cash journal. This could be done like described in note 214104. In
this note the field assignment was added to the screens of cash
journal. This is only an example for what to do. Split screens are
not considered in this note. Are enhancements of the split screens
necessary? All enhancements have to be done in manual and are
modifications.
Ultimately instead of going for modifcation in standard screen of FBCJ we resorted to block cash collections in FBCJ and routed them all through F-28 or F-29. Please aslo have a look at 1068200 . Hope this piece of information will help you.
Regards

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Business area is not appearing in the FBL1N

Hello Experts,
Please give me your valuable suggestions for below issue.
Business area is not appearing for few transactions for particular vendor in TC: FBL1N, We are using Ecc 6.0. Please advice.
Thanks,
Ratnam V

Please review note 549182 FAQ: Business Area Accounting
in particular see point 3.
3. Question:
With customer and vendor items, why can you not enter a business area?
Answer:
Open items are assigned to business areas depending on the expense and
revenue items of the invoice.
Because of this dependency, open items can be assigned to several
business areas. Thus the assignment is no longer unique. There is a
function available in the balance sheet adjustment that enables a
subsequent assignment.
With a unique dependency, the business area is copied into the open
items not assigned to a business area during the posting of the
document.
Also consider SAP Note 41294 in this context.

How to make Credit Control Area field mandatory in fb01, f-01, f-02, f-04

Dear all,
Whenever we are trying to create any accounting document for a Customer, we need to make Credit Control Area a mandatory field in transactions fb01 / f-01 / f-02 / f-04.
This is required because we have different Credit Control Areas for different Sales Areas for a Customer.
Can this be achieved through Customizing (making screen field mandatory) or one needs to use user exit?
Another option could be screen variant, however, it would result in multiple t-codes e.g. zfb01 / zf-01 / zf-02 / zf-04
I appreciate your help in this regard.
Thanks and Best regards,
SAP_ROI

Hi,
You need to write validation rule for to make Credit Control Area field as mandatory field for the Transaction codes FB01 / F-01 / F-02 / F-04 and please use T. codes GGB0 & OB28 for the same.
Regards,
Shailesh Verma

Credit control area CCAJ not permitted for company code

Hi All,
We have One company code, under that we have two credit Control Areas.
In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
Now, it is while creating the Invoice for another CCA. It is throwing the below error.
Credit control area CCAJ not permitted for company code 1301
Message no. F4746
Please guide.
Regards
Vinay

Hi
Check whether u have maintained the combination in SPRO-Financial Accounting-A/c Rec and Pay-Credit Mgmt-Assign permitted Credit control areas to company code.
regards
vamsi Javaji

Credit control area CCAJ not permitted for company code 1301

Hi All,
We have One company code, under that we have two credit Control Areas.
In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
Now, it is while creating the Invoice for another CCA. It is throwing the below error.
Credit control area CCAJ not permitted for company code 1301
Message no. F4746
Please guide.
Regards
Vinay

Hi Vinay,
To do this you have to go to the path SPROFINANCIAL ACCOUNTING-ACCOUNTS RECIEVABLES/PAYBLES-CREDIT MANAGEMENT-CREDIT CONTROL ACCOUNTASSIGN PERMITTED CONTROL AREAS TO COMPANY CODE. In this activity you can enter additional credit control areas which are allowed for each company code, in addition to this default credit control area.
You can enter these credit control areas in the line item or let the system determine them from the order data, customer data, or a user exit in the order. This way you can use the control area as a flexible internal control instrument and data which has to be posted in the same company code for accounting reasons no longer has to be managed in the same control area.
Regards
Ram Pedarla

HT3819 I have turned Home Sharing on on two computers, but the "Shared" area is not appearing on either computer. What does this mean? What do I do? THANKS!

I have turned Home Sharing on for two computers, but the "Shared" area is not appearing on either computer. What does this mean? What do I do? I am trying to get music from one library into another library to sync with my ipod so that I can have all songs on the ipod from both libraries.
Thank you for your help!

If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar.
If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
Hope that helps. Good luck.

Field functional area does not appear as an entry field into the document..

Hi,
We are using the functional area field in our system. In order to access this field, we proceeded
to customize the system as follows:
- We already activate Cost of Sales Accounting for our Company Code.
- The field functional area was set optional through transaction OB41, for the posting keys required.
- The field functional area was set optional using transaction OB14, for the field status group assigned to the GL accounts.
However, we cannot enter the area functional when we are posting documents related to customers and vendors.
Although the field functional area was set optional, it does not appear as an entry field into the document screen for the
different transactions: fb70, fb60, f-02,fb01. It is only happening when we areentering the document position for the vendor/customer.
Regards,
Efrain

Hi,
In FB70 or FB60 change the layout ........ select the line item layout configuration, you get a separate Table Settings screen pop up where in you need to select "Administrator" button the system displays another pop up window where in you can check whether the Functional Area field is checked as invisible if so remove the check mark and active the settings.
Kind Regards

Functional Area field not getting populated in the AUFK table

Hi Friends,
The table AUFK is the table for Internal Order master data.
The issue which we are facing is:
In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
But the cost centers which are maintained in the order master has the functional area field populated with value.
In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
Thanks a lot in advance for your help.
Regards,
Shilpi

Hi,
maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
Best regards, Christian

Vendor to vendor entry-profit center field not appearing in line item

Dear Sir/Madam
We have gone live with New GL Implementation. Last month we have implemented it.
Now we are passing entries from vendor to vendor. It is transfer entry from one vendor to another through T code FB01.
we have made the profit center field mandatory in the Reconciliation GL account Field status group. Also we have made the profit center field mandatory in the Posting key 21 and 31 field status. The profit center field is not appearing in the line item because of which we are not able to post the entry.
Kinldy help us to resolve the issue.
Prashant Zinge

Hi Prashant,
As mentioned by all here.. it is correct that you do not have profit centre in Vendor line items..
As I understand it is a one time activity.. of transferring balance from one vendor account to another vendor Account.. so you can use a clearing account to transfer the balances.. this way your entries will increase but you will be able to post w/o any customisation. You can also use LSMW to post this.
Regards,
SAPFICO
Edited by: SAPFICO on Jun 20, 2011 11:49 AM

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

Field not appearing in datasource

Hello Experts,
I have enhanced extract structure with a new field. written code to populate the field in CMOD.
But this field is not apperaing in datasource.
I have used debug mode in RSA3 and found that field is getting populated but it is not appearing in output.
Can anyone please help.
Thanks ,
Saurabh

These are steps to appending a field, just in case one was missed:
Step 1: Append structure via RSA6, by finding datasource and then clicking on the Functional Enhancement button; this will open up the append structure. NOTE***If this has already been created, you can access the append structure via SE11 (usually ZA and then the structure name)
Step 2: Add field to the append structure and activate
Step 3: Go back into RSA6 and find the datasource and click on the change icon.
Step 4: Validate the the Hide field is not check for this new field that you added and that the 'Field Only Known in Customer Exit' is checked
Step 5: Save this datasource
Step 6: Open CMOD, enter your project that you have created and then click on components and display
Step 7: Choose EXIT_SAPLRSAP_001 for transactional data enhancements (ZXRSAU01) and EXIT_SAPLRSAP_002 for master data enhancements (ZXRSAU02)
Step 8: Activate associated cmod code above and put a breakpoint (hard or soft one) in your code to validate that it is accessing this cmod code that you created.
Step 9: RSA3 and execute in debug mode until breakpoint is hit
If all of the steps above are executed, this field should be populated. There may be an instance that the view of your RSA3 extraction is not showing you all the fields because of the display of this output but if you highlight a record and then click on the magnifying glass above, you will see all the data in that record but this view will only show you the populated fields so if their is not data, there is probably something wrong with your cmod code.

Price_C field not appearing in Shopping cart

Hi All,
I am using MDM5.5 SP02 and SRM server 5.0 and facing problem for price field
Earlier I tried to upload catalogs price with price information field , but didn't succeded.
Then I created new field in MDM console as Price_c and uploaded the price.
In UI config I mapped the New_ITEM-PRICE with the new field Price_c.
But when I go to create shopping cart , this field is not available.
Even whatever setting I have made User specific fields i.e Customise display fields ,Customize Search fields are not appearing in the Shopping cart
Please guide me
Thanks
Suds

Hello Suds,
If you create any extra fields or tables then make sure that they have proper codes assigned to them or not in MDM Console.
If not then assigned the proper code name.just follow the code name as MDMSRM_FIELDNAME.
If the field which you have created related to any OCI field then just map with that in UI else map it with NEW_ITEM-CUST_FIELD1.
By doing this, you will get the field which you required.
I hope this will solve your problem.
TNR,
Saurabh...

Credit cntrl area field not appearing in CMR

Similar Messages

Maybe you are looking for