Credit Limit Check - Value & Periodwise both at the same time

Dear All,
This problem is related to Credit Management.I want the system should carry out a check which will take into consideration both the value and credit limit days while punching a sales order.
For Example : Party : A Credit Limit : Rs. 1000/- Credit Limit days : 2
We have made one invoice of value Rs. 600/- Credit Exposure : 60% Remaining Credit Limit : Rs. 400/- on 08.01.2009.Now after 2days i.e. on 10.01.2009 I want the system to stop generation of sale order by setting the credit check block at the Sale Order level even though the sale order value will not exceed the remaining Credit Limit i.e. Rs.400 and the order will get blocked as a result of Credit Check being carried out on the basis of Credit Limit days.
The configurations which are at present prevailing in OVA8 are as follows -
CCA RkC CG Credit control Curr. Update
1000 001 01 High Risk Sale Orders INR 000012
No credit check 1
Item check (Check Box is marked on)
Checks
Reaction Status / Block Open Orders / Open Deliveries
Static C (Check Box is marked on) (Check Boxes are marked on)
Horizon - M
Oldest Open Item C (Check Box is marked on) Days oldest item - 30
All other check boxes and fields remain empty / blank.
Now considering the above scenario please suggest what other configurations are requiered to attain my requirement.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka

Hi Priyanka
Your Configuration seems to be O.K
Even though every one has suggested , just change the following  settings
In OVA8 make the changes
Max open item - Increase it to 75%
No of days - 1
Days oldest open item - Blank
Go to OMO1 and For the Infostructure S060 change the period to DAYS , if months or Year is there
Regards
Srinath

Similar Messages

  • TS2755 My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers.  I have checked and we both have the same settings.

    My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers.  I have checked and we both have the same settings.  Both of our phones are up to date 7.0.4.

    The ability to see and send calendar invites is a function of the calendar you are subscribing to and who owns it. We need more information, like what calendar are you subscribing to? MS Exchange? Google? Mobile Me?

  • My Apple ID and rescue email are reversed. How can I change them both at the same time

    My Apple ID and rescue email are reversed. How can I change them both at the same time?

    I'd already used this standard tool (exhaustively!), but for the problem encountered it operated in Catch 22 mode - you had to do two things but neither order was permitted. I did find an answer eventually, but am not sure what it was I did that solved it! Thanks, anyway.

  • How do I view two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    see my reply in your other post:
    You're familiar with the TRIM-tool?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

  • Multiple people checked out a story at the same time

    Had a strange  incident today where two incopy users had story checked out at the same time. I wouldn't have believed it if I hadn't seen it for myself. I checked the links, they were going to the same place. One user lost his changes when both checked in the story. How could this happen? Looked like maybe the locked file was disappearing for some reason.

    Pretty much covered this in the ID forum.
    Bob

  • Is there a limit of macs using one and the same time capsule at the same time?

    Thanks for answering, can't find anything like this in the web and i'd like to use time capsule together with my boyfriend. We both have macbooks.

    You can use multiple computers at the same time.. if you use wireless it will go very slowly while they are both running backups.. it would be better to stop the backup on one and wait a half hour and then restart it.. that should displace the time it backs up by half hour.
    The max number of computer is however many people can stand it with the speed.. the actual client limit is 50.. but you would start having seizures long before you get there.. a rule of thumb is 10 clients per AP.. and even then it is going to be slow if all are active at the same time.

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I have an Ipad mini and an iphone 4.  Can i get text messages on both at the same time?

    I have an Ipad mini and an iphone 4.  Can I get text messages to appear on both devices at the same time?

    Yes if the messages are sent to an ID which is in the receive section of Settings > Messages > Send and Receive on both devices.

  • Can you have Firefox and IE browsers both at the same time and if so, do you have the choice of choosing one for a default browser?

    I am using IE Explorer now presently. I want to be able to download and install the SEO Blogger tool from Wordtracker but it says that I have to have Firefox as the browser. Since I have everything else already set up under IE, I don't want to have to change all that just so I can download one program.
    Can you help?
    Thanks,
    David Craig

    You can have both browsers installed and running at the same time. You can also choose what one to have as the default browser.

  • Coupled contacts - change both at the same time.

    I have contacts on my iPhone that are related to my Exchange e-mail accounts. They synchronize just fine.
    I also have, mostly the same, contacts on my iPhone, imported from Outlook. They just synchronize one way (FROM outlook TO iphone, not the other way around). By the way, if anybody knows how to sync both ways, I'd be very happy to hear that.
    Similar contacts are coupled (I don't know the exact English phrase, in Dutch it's "gebundeld"), so you don't see any duplicates in the Contacts list.
    Unfortunately, when I change a "coupled contact", it just changes one of the two contacts that are coupled.
    I would love to be able to change both contacts at the same time.
    Can this be done? If not, could this be made possible? Please?
    With kind regards
    Repelstale

    Hi and  welcome to the forums!
    How about a move! :
    http://crackberry.com/blackberry-101-lecture-6-how-install-microsdhc-card-your-blackberry
    If this anwers your question please resolve the post, if not please ask more!
    Thanks!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Is there a way to overlay a photo onto an existing movie so you can see both at the same time?

    I'm trying to create an effect, which I'm sure can be done, which at various points of a 3 minute movie, i can overlay still photos  where you can see the photo overplayed onto the movie at the same time.  What technique is used?

    marks
    What version of Premiere Elements on what computer operating system?
    Assuming Premiere Elements 11, 12, or 13 Windows details...
    Supplemental contribution to your question...
    Please review and consider the merits of using a PiPs preset (Picture in Picture)
    These are presets found under fx Effects/Presets/25% or 40% category). They come in static version as well as spin in and other motion versions.
    Adobe Premiere Elements Help | Creating a picture-in-picture overlay
    ATR

  • Dual DVDRW Drive burning on both at the same time

    In the mac pro that would have 2 dvdrw drives in it, is it possible to burn the same data to each drive at the same time?
    within the os it self or with 3rd part software

    Definitely with 3rd party software, unsure about Disc Utility / iTunes / other.
    BUT, the optical drives are on a PATA bus (Master / Slave) so they share the same bandwidth through the ATA-133 controller. Low speed burning would be a doddle. High speed burning may cause issues - I know high speed burning for drives like these requires the ATA-133 bus (over the ATA-100 bus) even when you just burn using one drive (see specs for Pioneer drives on their website), so two drives at high speed would strain to get data fast enough. You can but try, and while burning two DVDs at 16x in parallel may be too much, burning at 8x in parallel may be OK, and that is still fast enough for most of us.
    Just as a note, I tried, (using Toast) a few months ago, to burn a large number of CDs and DVDs. I found it took me longer to prep the burn, document what I had burned and label the disks than the actual burn took - so although I could burn in parallel I didn't gain any time advantage over burning a single disc at a time.

  • How do i open 2 tabs at the same time, whenever i want to open a new tab, the other one disappears and i cant get both at the same time

    opening 2 tabs at the same time

    Hello Sandy.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your problem, make sure your instructing Firefox to open the link in a new tab. For example, middle-clicking (pressing the mouse wheel or the central button of the mouse) the link will open it in a new tab.
    If that doesn't help, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.

  • HT4865 Can someone else see what I'm checking online on safari at the same time?

    I want to know if some one who share my IPad password can see what I'm checking online on safari, at same time I'm doing it?

    Here are the individual files for those that fear the my other file of virii.
    Attachments:
    HASP.vi ‏88 KB
    File Setup.vi ‏11 KB
    Gather and Output.vi ‏149 KB

  • Cloned datasource, but unable to use the both at the same time

    I used the AVTransmit java application as sampe to build my applet for transmitting realtime image from the webcam. I desired that it has a container to contain the player and it has a button for RTP transmission.
    I have used the Manager.createCloneableDataSource(ds) to clone the datasource from webcam.
    The applet can display realtime image on the container. While I clicked the button, the container hanged up and then changed to black. But the data can transmit by RTP part. I can receive the transmitted image in another PC.
    Do you have any idea ?
         public void init() {
              Component vc = null;
              Component cp = null;
              JPanel visualContainer = new JPanel();
              visualContainer.setLayout(new BorderLayout());
              JPanel mainPanel = new JPanel();
              mainPanel.setLayout(new GridLayout(2,1));
              JPanel inputPanel = new JPanel();
              inputPanel.setLayout(new GridLayout(2,1));
              Vector vlist = CaptureDeviceManager.getDeviceList(new VideoFormat(VideoFormat.YUV));
              for (int i = 0; i < vlist.size(); i++) {
                   CaptureDeviceInfo vinfo = (CaptureDeviceInfo)vlist.elementAt(i);
                   locator = vinfo.getLocator();
              try {
                   ds = Manager.createDataSource(locator);
              } catch (Exception e) {
                   System.err.println("Unable to create DataSource from : " + locator);
                   System.exit(0);
              ds = Manager.createCloneableDataSource(ds);
              if (ds == null) {
                   System.err.println("Unable to clone the DataSource");
                   System.exit(0);
              try {
                   player = Manager.createRealizedPlayer(ds);               
              } catch (Exception e) {
                   System.err.println("Unable to create a player from the DataSource :" + e);
              player.addControllerListener(new PlayerStateListener());
              //Realize the player
              player.prefetch();
              if (!waitForPlayerState(player.Prefetched)) {
                   System.err.println("Failed to realize the player");
                   //return false;
              if ((vc = player.getVisualComponent()) != null)
                   visualContainer.add(vc, BorderLayout.CENTER);
              if ((cp = player.getVisualComponent()) != null)
                   visualContainer.add(cp, BorderLayout.SOUTH);
              player.start();
              mainPanel.add(visualContainer);
              System.out.println(player);          
              setVisible(true);
              getContentPane().setLayout(new BorderLayout());
              ipAddressField = new JTextField();
              pbField = new JTextField();
              sendButton = new JButton("Submit");
              sendButton.addActionListener(this);
              inputPanel.add(ipAddressField);
              inputPanel.add(pbField);
              inputPanel.add(sendButton);
              mainPanel.add(inputPanel);
              getContentPane().add(mainPanel);
              System.out.println("locator = " + locator);
    // this is the code segment for RTP transmit
              try {
                   processor = javax.media.Manager.createProcessor(ds);          
              } catch (NoProcessorException npe) {
                   return "Couldn't create processor";
              } catch (IOException ioe) {
                   return "IOException creating processor";
              // Wait for it to configure
              boolean result = waitForProcessorState(processor, Processor.Configured);
              if (result == false)
                   return "Couldn't configure processor";
              // Get the tracks from the processor
              TrackControl [] tracks = processor.getTrackControls();
              // Do we have atleast one track?
              if (tracks == null || tracks.length < 1)
                   return "Couldn't find tracks in processor";
              // Set the output content descriptor to RAW_RTP
              // This will limit the supported formats reported from
              // Track.getSupportedFormats to only valid RTP formats.
              ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
              processor.setContentDescriptor(cd);
              Format supported[];
              Format chosen;
              boolean atLeastOneTrack = false;
              // Program the tracks.
              for (int i = 0; i < tracks.length; i++) {
                   Format format = tracks.getFormat();
                   if (tracks[i].isEnabled()) {
                        supported = tracks[i].getSupportedFormats();
                   // We've set the output content to the RAW_RTP.
                   // So all the supported formats should work with RTP.
                   // We'll just pick the first one.
                   if (supported.length > 0) {
                        if (supported[0] instanceof VideoFormat) {
                             // For video formats, we should double check the
                             // sizes since not all formats work in all sizes.
                             chosen = checkForVideoSizes(tracks[i].getFormat(), supported[0]);
                        } else
                             chosen = supported[0];
                             tracks[i].setFormat(chosen);
                             System.err.println("Track " + i + " is set to transmit as:");
                             System.err.println(" " + chosen);
                             atLeastOneTrack = true;
                        } else
                             tracks[i].setEnabled(false);
                        } else
                             tracks[i].setEnabled(false);
              if (!atLeastOneTrack)
                   return "Couldn't set any of the tracks to a valid RTP format";
              // Realize the processor. This will internally create a flow
              // graph and attempt to create an output datasource for JPEG/RTP
              // audio frames.
              result = waitForProcessorState(processor, Controller.Realized);
              if (result == false)
                   return "Couldn't realize processor";
              // Set the JPEG quality to .5.
              setJPEGQuality(processor, 0.5f);
              // Get the output data source of the processor
    Many thank you in advance

    Dear jcparques
    Thank you for your reply.
    I have tried to use the clone datasoure for player and original datasource for RTP transmission, the player displayed black and the RTP successfully, as I can get the live image by another PC. I have tried to use the clone datasoure for RTP and original datasource for player, the player worked normal and the another PC awared the participant joined. It has just waiting the data from RTP.
    I sured the datasource has been cloned as I can System.out.println it, it is not a null.
    Any idea. Thank you very much.

Maybe you are looking for