Credit limit crossed.

Hello friends,
i have a problem in credit limit,
i have defined credit limit for the customer eg :- AMOUNT USD 200,000 credit limit.
but still its generating invoices even after crossing credit limit.
please let me know the solution.
thanks + regrads
SN.Noorie

Hi,
Please run the T.code:VKM4 for allowing the sales order to process the billing.
Change the option the overall document testing A2 b to B2 A...
I hope it will be more use full internal testing...
thanks and regards
nagaraju sami

Similar Messages

Credit limit on customer which cross multi-operating unit

if we have two operating units under one set of book, these two operating units(OU) owns a common customer. i wants to setup a single credit limit, and let system calculate all open uninvoice shipment & unpaid amount of these two OU, and decide if hold the new shipment.
now we are using 11.5.10 ebs, i want to if the standard function could do that.
BTW, if there is a SO with credit hold, the system will calculate in planning module or not.
Edited by: user12050014 on Aug 3, 2011 6:51 PM

Hi
While carrying out the dynamic credit check, the system considers the Horizon period while calculating the open items also just like the open orders. The system will not take the entire open item value and on that value which falls due within the horizon period will be considered.
Thanks,
Ravi

Credit Limit based on Open Items only.

Dear Friends,
Is it possible to set credit limit based on Open Items only ( Document Type RV)
If the credit limit is crossed for accounting documents not yet cleared, then system should allow creating sales order, but block any deliveries further.
Just to add this, we are using Oldest Open Item, to make sure system blocks deliveries if even one Billing document is overdue for payment.
<< Moderator message - Please do not promise points >>
<< Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
Regards
Trupti Deulkar
Edited by: Rob Burbank on Dec 16, 2010 4:02 PM

Hi,
AT FD32,
For respective customers Credit Limit should be made 99999999....(i.e maximum)
Goto OVA8. Select the respective Credit Control area, Risk category & Customer Group.
tick-> OpenItems
Max.Open items 100% and Nodays Open here you can maintain the grace days (after the payment term limit expires) is allowed to do the transaction for respective customer.
if grace days are '0', then as soon as payment term limit is expires system will block the transactions selected.
Thank You,
RB.
Edited by: RB@007 on Dec 16, 2010 3:12 PM

Credit Check not occurring for Customer with Partial Credit limit existing

Hi,
I have a scenario
1) where, if credit limit is crossed, then on creation of order I get an credit check even when i have not entered materials in sales order.
2) Partial Credit limit is pending (for e.g Credit limit of 100, 50 is still pending) when i create a new order with unconfirmed quantity, for amount 100, there is no credit check happening. (system should give message for extra amount 50)
Can I please get guidance on this issue.(2nd point)
Thanks & Regards,
Ganesh.

HI Ganesh,
Your issue is not clear. What do you mean by
2) Partial Credit limit is pending (for e.g Credit limit of 100, 50 is still pending) when i create a new order with unconfirmed quantity, for amount 100, there is no credit check happening. (system should give message for extra amount 50)
Please explain clearly
Thanks
Jobi

Sales order is blocking while credit limit is exceeded ...

Dear Friends ,
Client issue regarding credit management ,
all customers are defined under low risk category ,
in OVA8 transaction code we activated
i) For Static credit check : reaction D & status Block checked & open orders , open deliveries are blocked
ii) For Oldest open items : reaction D & status Block checked & days oldest item 10 days
Issue is ,
while creating a sales order pop-showing credit limit is exceeded but it is not blocking the sales order , some not blocking the delivery . It is showing only pop-up for when it is in periods from 10-60 days in F.31 transaction code . requirement is it should be blocked .
Please respond asap ...
thanks in advance ...

Dear,
Oldest open Item check works as follows.
Say, you have set the Oldest Open Item indicator with D and Block (activated) and Days oldestItem as 1.
Then, the system will check if there are any any open accounting documents (billing documents which accounting document is created and not cleared) - and will consider the bill due date too, and will validate, if there are any open items which has crossed the billing due date, and that cross count is greater than the one mentioned in OVA8.. If any such document is there, then it will block the sales document..
say: Billing date: 10/10/ 2011
Payment terms: due in 10 days
Then, this will be treated as oldest open item after 20/10/2011..
If you are creating document on 22/11/2011, the system will block the new order as this document exceeds the count (count in OVA8 is 1; whereas, this document is older than 2 days)..
Hope this clarifies about oldest open item and when the system will block the sales order..
Check in FD10n, this will show you all details clearly..
If the credit block is set, still you are able to create delivery, check any seasonal factor or checks in financial A/R summary is maintained (if anything)..
thank you
Venkatesh

Detect customers without credit limit

Hi,
in my firm we use credit control for customers in the EXP market.
In SE16N when I go to table KNKK I can pull a list of all customers with credit limits -- they have value "EXP" in field KKBER or no. of credit (equal to customer no.) in field KNKLI.
However I noted that were several customers in table KNA1 that belonged to account group (field KTOKD) no. 0001 or 0003 and technically are part of EXP market, hence should have credit limit, but I cannot find them in table KNKK.
Why is that? When master record is set up it's another process to set credit control for the customer?
Also, I'd like to pull a list of all customers from table KNA1 that belong to EXP market and cross-match them to table KNKK in order to detect if they do not exist in KNKK, i.e. do not have credit control.
How can I do it?
Would appreciate your response. Regards

Hi,
Try the T-Code F.32
In this T-code you will get the list of all the customers whose credit limit is not maintained in FD32.
Thanks and regards,
Amitesh Anand

Requirement list should be Populated in MD04 When FIXED QTY/DATE activation In credit limit exceeded

Dear sd experts
I Have one Business requirement But i dont know how to achieve Please share Your ides
Generally once any document is blocked due to credit limit .. we can release in VKM3
But in my business process For some sales orders we have maintained FIXED QTY/DATE Option in sales order
i know this functionality
so if it is activated and same time if customer crossed his credit limit system confirms 0 qnty as per sap stranded
And no requirement will be seen in MD04
So in this situation no meaning To release in VKM3
My requirement is We have to activate FIXED QTY/DATE Option in sales order as well as if document crossed credit limit also Items should be scheduled and it should be transformed To MD04 And Authorization person will release in VKM3
How to fix this ..thanks a lot

Hi Sreehari,
For your requirement, you need to add a requirement at the access sequence level for the access sequence related to the KRML output type.
Code must be written based on the below logic.
If VBUK-CMGST (Header Overall credit status) is blocked and
If VBEP-BMENG (Confirmed quantity at schedule line level) is >0 then output has to be triggered. Further if order is having more then one schedule line system has to check for the last line (Tell this to Developer and make sure you test one scenario regarding this. First schedule line with zero confirmed quantity and second with full quantity).
For the second requirement
If VBUK-CMGST (Header Overall credit status) is blocked and
if VBAP-KWMENG (Item quantity) is changed output has to be triggered again.
Hope this explains.
Edited by: mokirala tilak on Sep 15, 2011 4:44 PM
Edited by: mokirala tilak on Sep 15, 2011 4:51 PM

Can v set credit limit for a vendor? if so, how?

can v set credit limit for a vendor? if so, how?

Hello
the two replies are correct that the redit limit is always used for customers. but i can give you the scenario as per the request and Amrita please correct me if i am making something wrong.
as per vendors there are three to four vendors are available for buying a material. we are not using quota arrangement but we just distribute the order based on the situations. the order is given to a vendor who is quoting low price, giving the required quality and quantity and supplying as per our need. there is one more criteria for choosing this vendor. the outstanding balance for this vendor should not cross some limit.
the limit may be based on negotiations and the some contracts' terms and conditions.
the solution for this may be that there should be one report where you can see how much we owe to each vendor. this could be possible only when we know the Vendor g/l account and the corresponding balances.
i think i have cleared the credit idea as well as given the solution. please reward if found it helpful.

Credit Limit issue during PGI despite Credit available to customer

Dear All,
We have configured for Credit Management for Customer.
Everything was working perfectly fine for a very long time. But now there suddenly seems to be an issue. The customer has available credit but still the system does not allow us to do PGI. It gives an error message that the customer credit limit has been exceeded.
We checked in FBL5n and found that credit is available. There are no backlogs. But in FD32 we found that the credit exposure shows values in positive and the Blocked check box is ticked therefore blocking the customer. When we checked through Menu path - Environment - Sales & Distribution Docs - Open Orders and Open Deliveries , here we found that in table S067 there are open orders and open deliveries. But upon cross checking with VA05n and VL06/Vl04, we found no open deliveries or open sales orders.
This seems to us as a strange issue that the system is not updating the LIS table although we have not configured for LIS.
We contacted SAP for this and were given a temporary solution to execute program RVDREK77 to clear the table. But this dosent seem to be a permanent solution since we have to run this everyday as a background job. Also this program can be run only when no other transaction happens in SAP.
If anyone has faced a similar problem, I would request to suggest us a permanent solution for this.
Thanks & Regards,
Rohan Gudavalli.

Hi Rohan,
As per my understanding of the issue, There is problem in credit updation. To manage this you have to run the program RVKRED77. On executing this program system will reorganize the credit in case of update errors. Please have this execution done once in a week during week ends for required credit control areas. This is quite common problem we encounter regarding the updation of credit and the only way is to run the mentioned program periodically.
As you know normally in credit S066 and S067 information structures are involved in the updation. These information structures work in tandem with the update group which is assigned in OVA8 screen resulting in the updation of credit.
When an order is created S066 information structure gets effected and OEIKW field value gets increased.
When order is delivered S066-OEIKW gets decreased and S067-OLIKW gets increased.
When delivery is billed S067-OLIKW gets decreased and S067-OFAKW gets increased.
So credit is completely controlled by the information structures and the update group. Some times it happens that system will not be able to update the credit. To re-organize the credit incase of update errors please have a background job set up done prferably during week endsfor the program RVKRED77.
As you are saying that you have problem with only one customer; please check whether oldest open items check is evaluated.
Please use the program Check_CM to analyze the credit. On inputing the order number or the delivery number you can get the complete analysis of the credit done for the order or delivery.
Hope this explains.
Edited by: mokirala tilak on Jan 6, 2012 6:21 PM

Credit Limit on basis by specific product

Dear Experts,
Could you please suggest me any body how to maintain credit limit by specific material (Product).
Let say Customer Pepsi has 3 products i.e X,Y and Z....pepsi (customer) has credit limit 100 USD. Here the customer credit limit is 100 usd but this customer has that credit limit by product wise that is:
X Product 30 usd
Y Product 50 usd
Z Product 20 USD
When they are creating they wont cross credit limit by product wise even though the customer has credit limit if X product credit limit 20 usd exceeded. Could you please suggest me how to maintain this scenario.
Thanks in advance,
VS

Workaround is:
1) Create three different credit control areas.
2) Assign the three different credit control areas to the respective sales areas.
3) Maintain different credit limits for the customer in the individual credit control areas.
4) Whenever the order is created in the respective sales area the credit limit for that particular sales area will come into picture.
Assumption is that three different materials belong to three different divisions so that the sales area is differing. Because of different sales area you can assign different credit control areas.
Regards,
GSL.

Credit Limit by specific Material (product)

Dear Experts,
Could you please suggest me any body how to maintain credit limit by specific material (Product).
Let say Customer Pepsi has 3 products i.e X,Y and Z....pepsi (customer) has credit limit 100 USD. Here the customer credit limit is 100 usd but this customer has that credit limit by product wise that is:
X Product 30 usd
Y Product 50 usd
Z Product 20 USD
When they are creating they wont cross credit limit by product wise even though the customer has credit limit if X product credit limit 20 usd exceeded. Could you please suggest me how to maintain this scenario.
Thanks in advance,
VS

hello, friend.
credit management focuses on the customer. credit info centers on the customer/credit account. materials are not directly controlled by credit management.
however, it is possible to do credit management per material by assigning different divisions to your materials. then, you define and assign different credit control areas to your sales areas. indirectly, materials can then be controlled by the different credit control areas. you can have different credit limits for a customer pre credit control area, all controlled in turn by a central credit limit (total).
however, this is not recommended as it complicates your credit management. it may also pose problems in your sales order processing, despite the ability to process several divisions in the same document.
regards.

Credit Limit By Material with Customer

Dear Experts,
Could you please suggest me any body how to maintain credit limit by material (Product).
Let say Customer Pepsi has 3 products i.e X,Y and Z....pepsi (customer) has credit limit 100 USD. Here the customer credit limit is 100 usd but this customer has that credit limit by product wise that is:
X Product 30 usd
Y Product 50 usd
Z Product 20 USD
When they are creating they wont cross credit limit by product wise even though the customer has credit limit if X product credit limit 20 usd exceeded. Could you please suggest me how to maintain this scenario.
Thanks in advance,
VS

Thanks

Credit Limit warning message?

Hi All
The credit limit is enabled for the customers and the system is giving warning messages wherever the credit limit is deviated. The same warning message appears even though there is no credit limit is set for some customers? why is this/
Thanks
SV Reddy

Hi
This setting s made Globally for all BP's. if it is for One BP Credit Limit is 0.00 , that u have not mentioned ,then SAP wil think that it crossing limit so it will warns. if u want to come for ly particular Bp whose cr. limit defined then u can try with SP_Trans..
Giri

Idoc-Credi limit

Hi All,
I need help regarding my client requirment they want to send idoc whenever customer crosses 90% credit limit to the third party system(customer).Please help me solving this issue.
Regards,
Suresh

Hi ,
Please check also the following OSS note: 677377 - E-mail to credit representative.
Email can be sent to your credit manager when sales order gets blocked. Maybe you could set 'soft credit limit' at 90% of real credit limit and send emails when this level is reached.
Kind regards
Witek Prawecki

Free Goods Sales Order for Charities with Credit Limit

Dear All
I have a scenario where POS (Point of Sales) has been implemented,the process of POS is ok,but the requirement of the client is they are giving some goods to charity,when ever a person comes with a special card (Issued by the company) the outlet will create a sales order for the same without any charges with a credit limit of 1000 SAR (saudi arabian riyal).
Requirement
1) Creation of sales order with delivering goods but without any charges.(should have effect in Stock)
2)These charities is been treated as Customer with a credit limit of SAR 1000 (whenever the credit limit exceeds system should block the order)
how this scenario can be mapped in SD,
Thanks in advance
Malik

Dear Malik
keep the process regular, which will help in blocking the charity customer when reached 1000 SAr at order level itself.
As customer need to be shown that he is not charged.
you can work on changing the display of output determination .
You can take the help of Ababer and display what ever client is asking for.
I think this may solve your query without disturbing you regular business process.
Regards
Pavan Kumar

Credit limit crossed.

Similar Messages

Maybe you are looking for