Credit limit for new customer
Hi Gurus,
My scenario is
in cerdit control area i have given update group 000012 and risk category is 001 and credit limit is Rs 0.01, this amount is eligiable for all new cus but my prrob is when i am creating the SO for new cus it is not showing the error message in sales order level, after then i am creating delivery and billing also.when i am doing the second time SO for that cus it is showing the error messageand delivery block will happend,settings every thing is fine
it is not showing the error message when i am creating the first time
pls correct me if i am rong any settings
giri
Dear Mr. Reddy,
Please find the link which deals with SAP SD Credit Management.
http://www.sap-basis-abap.com/sapsd012.htm
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
Similar Messages
-
I want to set dynamic customer credit limit for a customer
Hi,
I want to set a dynamic credit limit for a customer which should trigger during the time of Sales Order Creation.
Can anyone please let me know the settings one has to do to implement this process in the system ?Hi Below is the whole process for confign.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Regds
MM -
Productwise credit limit for a customer
Hi All,
Is it possible to maintain credit limit productwise (Divisionwise )for a customer.
we sell different products like Washing machine,Air conditioner ,Refrigrator etc which we classify as division in SD Module . we want to maintain credit limit for a customer productwise.ie seperate limit for Washing Machine, Air Cond and ref etc .
same should be checked at the time of creating sales order (VA01).
If some one have any solution for the above scenario please let me know.
Thanks & Regards
MeenakshiHi,
There is no standard functionality available to have the credit limits at product level, but try to build the logics and process through the three exits available in credit Management.
Also,
You can do is set credit limit, Credit control area wise.
You can use multiple credit control area, and assign the CCA to separate sales areas ( That will represent the different Region / Products, as per your requirement).
The assignment can be done in the below path:
IMG> Enterprise Structure>Assignment>Sales and Distribution>Assign sales area to credit control area
Here for combination of Sales Organisation , Distribution channel and Division you can assign separate credit control areas.
While the Distribution channels can be defined Region wise, the Divisions can be defined Product wise.
Now in FD32, Set the Credit limit of the customer , Credit control area wise.
regards,
Siddharth.
Edited by: Siddharth Dabhowale on Jan 9, 2008 12:40 PM -
Credit limit for the customer hierarchy
Hi All,
Our client needs a report to show the total Credit Limit assigned to Global customer as shown below. It will be the summarization of individual credit limits of all the customers linked to this Global Customer. It will be a BI report.
Can someboby please tell me as to how to create the credit limits for the customer hierarchy? Also, hoe to fetch these valus in the report?
Customer No Customer Name Total Credit Limit Individual Credit Limit
1000000 Carrefour 970,000,000.00
1000001 Carrefour France 300,000,000.00
1000002 Carrefour Spain 200,000,000.00
1000003 Carrefour Belgium 90,000,000.00
1000004 Carrefour Greece 85,000,000.00
1000005 Carrefour Italy 200,000,000.00
1000006 Carrefour Turkey 50,000,000.00
1000007 Carrefour Poland 45,000,000.00
2000000 Metro Group 290,000,000.00
2000001 Metro Austria 25,000,000.00
2000002 Metro France 53,000,000.00
2000003 Metro Spain 48,000,000.00
2000004 Metro Germany 63,000,000.00
2000005 Metro Switzerland 15,000,000.00
2000006 Metro UK 60,000,000.00
2000007 Metro Portugal 26,000,000.00
Regards,
RaghavHi,
Credit limit is maintained on payer level and you are not able in standard to split it between sold-to or assign N sold-to to one global limit. You have to extend the credit control functionality to check the credit limit additionally for the global limit customer. Unfortunatelly you cannot implement it without development.
Regards,
Marcin -
How can i maintain seasional wise credit limit for the customer
please
help me the scenario
regards
ramhello, friend.
you can do this in OVA8.
let's say the usual business cycle is that sales always grows to 20% above normal during the month of december. your company decides to increase the customer's credit by 5% during this period.
for this, go to OVA8. in the 'Credit limit seasonal factor' enter '5%' and specify from 01 december 2008 to 31 december 2008. then assign the risk category to the credit account via FD32.
the date range is specific and is not automatically renewable. you must also remove the entries here if the requirement is no longer active.
regards. -
Additional Credit Limit for certain period
Dear Friends,
My Client want a functionality where we can give additional credit limit for particular customer for particular duration.
Since the value for each customer will vary we cannot use credit limit seasonal factor in OVA8.
I want to maintain a Z Table with Customer No., From Date, To date and additional limit.
But how can I force the system to add this value in credit limit given in FD32 while performing credit check in sales order.
We are using the static credit check and in same functionality this additional limit value should be added if customer is maintained in Z table and if it falls within specified date.
Please advice.
Regards
MayankDear Mayank
If possible make different credit control areas.
decentralised credit management.
for each credit limit , set the credit amount.
change the credit control area for the customers as per additional credit limit .
A proper setting in FD32 , OVA8 and horizon period may give the results,
just an example-
ex1 / ex2
credit controlarea - ABC / xyz
Credit amount - 100$ / 150$
horizon period - 2months / 1month
-Jay -
Temporarily Increase Customer credit limit for va01
Hi,
My requirement is we want increase credit limit for customers for 1 or 2 days in temporarily basic or va01 order release purpose .
I maintained customer wise temporary credit & valid from and to dates in a z-table. How to solve this problem without using credit management FD32.
regards,
moon.Your requirement to increase Credit LImit of Customer for 1 - 2 days based on a Z-Table is not possible in SAP Standard. Also you dont want to use FD32.
Now in OVA8, Under Checks you have three Boxes for User 1, 2, & 3. There are the Enchancement Points give by SAP for you to implement your Z-Requirment in Credit Management.
You Requirement will have to be mapped in a Z-Development, speak to your ABAPer & he can write a code in User Exit which will refer your Z-Table & do the needful.
Hope this helps,
Thanks,
Jignesh Mehta -
FSCM-Credit limit for group of customer
Hi all,
Please advised how to set up in FSCM-CR for the following scenario.
I would like to set up credit limit for a group of customer. such as BP A is subsidiary of BP B.
BP B have credit limit 100,000 USD. BP A have no credit limit, but using credit limit of BP A.
I known in SD-credit, we can set up credit account of customer A in FD32 equal to customer B.
Regards,
JennyHi Jenny,
'Credit account' concept in FD32 acts as credit delegation to parent account.
- this delegation turned out to be simple tool, but vulnerable to hedge group-wide credit risk.
In FSCM version, SAP has strengthen this 'week form' of risk management, which sometime has troubled us.
FSCM has two kinds of credit control models for group-level credit control;
one is main/sub model and another is business partner relationship
Suppose you prefer to 'business partner relationship model'.
* Scenario and expected result;
'business partner relationship model' is different from 'credit account' concept, in that it both credit- checks for 'BP A' and 'BP B'. However, I guess that you could achieve goal if you set as below;
firstly, map BP A and BP B as business partner relationship
(BP A is lower, BP B is higher)
Secondly, assign to different risk category; BP A to no risk category, BP B to high risk category
(I supposed both A and B has same CCA(credit segment))
Thirdly, maintain 'OVA8'(Define Automatic Credit Control) differently
eg. no risk category => no message, high risk category => error message
wish your test and verification.
Best regards,
TED -
Credit Limit based on customer and material?
Hello Gurus,
I've 2 diff types of goods..
1) fast moving/ selling goods
2) slow moving goods.
For a particular customer, I've assigned certain credit limit of say 10,000 EUR via FD32.
My question is, for the slow moving goods or one particular material/certain goods, I want to have higher limit--is it possible to configure to assign credit limit per customer/ material?
Rgds,
Raghu.Hi,
As preceding answer, it's not possible in standard SAP.
The credit check is on the totallity of sales order, not by item.
If you are in the same sales order different materials, what is the reaction of system ?
But, you have different options to check this :
- Exclude material in credit check (according to material group for example) by using requirement in OVA8.
- Create a new condition type to check the credit limit in Ztable for customer/material. When you create sales order, a message is displaying according to your configuration (or blocking status for item).
You can compare Ztable (credit limit for customer/material) and another table for open orders.
Just an idea.
Regards,
Lionel -
Extend credit limit for particular term
On credit management,
If I want to extend credit limit for only particular from-to date, how can i do it?
I know about "credit limit seasonal factor" on OVA8, but this customization can give
only percentage base. I want to extend by amount base.
BR
Y.KanekoHi,
Std SAP provides credit limit to be maintained as a seasonal factor only in %.
In case of amount based maintenance, the same has to be maintained/developed using a custom modification described in [this|credit limit; thread.
Regards,
Amit
Edited by: Amit Iyer on Sep 20, 2010 11:26 AM -
Total Credit Limit for Co. code
Hi sappers,
I want to fix a total credit limit for Co. code sothat the aggregate of credit limit fixed for every Customer cannot exceed that total credit limit.There is nothing as standard that will allow you to do this.
Not sure why you would want to restrict this.
However it can be done with a bit of coding.
You will need to make sure you Credit Control Area only had the single Company Code.
You would then need to store the total amount of the Company Code in a Z table.
You would then need to use a user exit in the change and create credit master record in FD32 to check the total of all credit limits for the credit control area was not greater than your total for the Company Code.
if this is too much for you, you will have to manage this manually and report on the total credit limits for all customers in the credit control area. -
Separate credit limit for separate division
Hi,
Our client wants to provide separate credit limit for newly created division to their existing Dealers. How it could be possible through standard functional way. I thought of creating sepatrate credit control area . will it be help full ?
Regards
kaushikHi Kaushik
Maintaining the separate credit control area is also not a problem. But make sure that you are extending the customers into the new division sales area and in CMR data assign the credit control area also
Regards
Srinath -
Credit limit sharing main customer and sub customers
Dear all
Credit limit sharing main customer and sub customers. we have hierarchy to identified main cutomer and sub customers and different account groups. now in system we are using main customer payer for all sub customers also. in future we are going to share the credit limit sub dealesr also. wt are the possibilities to complete my requirements.
Regards
VenkeyHi Venky,
If i understood correctly. You wan to share main customer credit limit to all sub customer i.e. if main customer is having 5 Lacs Credit Limit the same amt you want to use for all sub customers.
If this is the scenario then assign the main customer in the sub customer Credit master as a credit account.
FD32 ---> Control Area Data ---> Status ---> Credit Account ( Under Credit Limit )....
Process to change the credit account: Perss F6 or from the status view Go to Edit ---> Change Credit acct...
Hope issue may resolve..
Regards
Durga Sana
Edited by: Durgaprasadsana on May 13, 2010 7:40 AM
Edited by: Durgaprasadsana on May 13, 2010 7:42 AM -
How do you setup an approval procedure to check a shared credit limit for 2 customers simultaneously? The credit limit is shared between the 2 customers which can be linked thorugh a UDF.
Example: Joint credit limit Cust1 and Cust2: $10,000
Outstanding orders for Cust1: $5,000
Outstanding orders for Cust2: $3,000
Available credit for any of them: $2,000.
If an order exceeds $2,000 in this example, it should trigger the Approval Procedure.
Cust1 and Cust2 can be linked through UDF U_CustGroup (or any other suggested field)
What would be the Query to use please?
Thanks,
A CastriHi Gordon, thanks again for response. The UDF will link a customer to its sibling (and back). Credit limit will be set at the same value for both customers. This is how I visualize it, but I don't know if a Query would be enough:
TotAvailCredit = CreditLimit - (Balance Cust1 + Balance Cust2)
If Total from Quote or Invoice > TotAvailCredit then trigger approval procedure.
Do you still think an SDK-based development would be needed, or just a Query would be sufficient?
Thanks,
Andres -
Function module to find the Credit limit of a Customer based on Credit Area
hi Experts,
Is there any function module to find the Credit limit of a Customer based on Credit Area.
Regards,
Dheepakhi
try this:
select single * from KNKK INTO zzKNKK
where KUNNR = xkunnr and KKBER = xkkber.
credit limit: zzKNKK-KLIMK...
regards,darek
Maybe you are looking for
-
Getting disabled screen on ipod not synced to a computer
I have an ipod touch that was locked to the disabled screen since the wrong pass code was entered. The ipod was never synced to a computer. The disabled screen tells me to connect to itunes. When I do that itunes tells me to enter the pass code. How
-
Issue with full screen apps quitting
I am having problems when I exit a full screen app on OSX Mountain Lion!!! It does't happen all the time but when it does the only way I could fix it is log out and log back in!! The problem is when I quit a full screen app the desktop it created to
-
2 monitors, gaming, youtube dailymotion, no video
flash 10,2,152,32 windows 7 x64 , opera chrome When i Play starcraft 2, warcraft 3, HoN on 1 monitor and the other monitor have a youtube/dailymotion video the second i switch to gaming ... the video goes black... when i switch back, it resumes.... i
-
LR 5.3 won't import .mov files from iphone 5s
I'm running Mavericks and LR 5.3 and have had trouble importing video files from my iphone 5s. All of my software is up to date. It seems that LR is having trouble connecting to the dynamic link server. It doesn't work even when I disable my firew
-
ORA-01031: insufficient privileges - NOT TRUE
Oracle: 10.2.0.2.0 Os: Solaris 10 (10/08 s10x_u6wos_07b X86) When I try to connect to db with sqlplus and not indicating SID it connets OK. -bash-3.00$ sqlplus sys/qaz123 as sysdba SQL*Plus: Release 10.2.0.2.0 - Production on Wed Jun 2 00:53:34 2010