Credit Limit tolarance

Hi Friends,
Please help me to resolve follwing issue.
My client reqiuirement is system should allow the sales order even if credit limit has been excedded by additional 10% .
For example: If the customer credit limit is 10,000 INR then system should not block the delivery upto 11000 INR.
Please let me know the configuration to achieve this.
I have already tested by changing the seasonal factor and deviation filed in OVA8 but it didnt work. I have entered 10 % in seasonal factor but still after 10001 system block the delivery.Please let me know if any additinal configuration is to be done besides this.
Thanks and Regards,
Mahesh

Hi,
Welcome to SDN..
as a general rule, pls search the forum before posting, this has been discussed already.
You should use max open item% in OVA8 settings.
check this thread for more: [Maximum open item % and no of days open item in credit management;
Regards,
Raghu.

Similar Messages

Free Goods Sales Order for Charities with Credit Limit

Dear All
I have a scenario where POS (Point of Sales) has been implemented,the process of POS is ok,but the requirement of the client is they are giving some goods to charity,when ever a person comes with a special card (Issued by the company) the outlet will create a sales order for the same without any charges with a credit limit of 1000 SAR (saudi arabian riyal).
Requirement
1) Creation of sales order with delivering goods but without any charges.(should have effect in Stock)
2)These charities is been treated as Customer with a credit limit of SAR 1000 (whenever the credit limit exceeds system should block the order)
how this scenario can be mapped in SD,
Thanks in advance
Malik

Dear Malik
keep the process regular, which will help in blocking the charity customer when reached 1000 SAr at order level itself.
As customer need to be shown that he is not charged.
you can work on changing the display of output determination .
You can take the help of Ababer and display what ever client is asking for.
I think this may solve your query without disturbing you regular business process.
Regards
Pavan Kumar

Does Simple Credit Limit Check Include Checking for Open Orders

Hi all,
I have this issue here where I have configured the system to use simple credit limit check with error message. I did not use the standard/common automatic credit limit check since user insist on a pop-up warning and that the order could not be saved. But, I realized that it does not take open orders into account too although I have set the risk categories. Is it true and what solution is there for this issue then.
Thank you for all your help in inputs.
Regards,
Yvonne

Hi,
Please follow the below configuration settings for Simple credit check process.
Simple credit check: In simple credit check the system compares the credit exposure with payers credit limit. The
credit exposure results from the total of the net document value and the value of the open items.
We can set the following system responses at when the credit limit has been reached.
A u2013Warning message
B u2013 Error message
C u2013 Delivery block
Specify in VOV8  Credit limit [C]
Configuration settings:
Sales documents types u2013 Credit limit check: Transaction code: OVAK
Path:
 IMG
 Sales and Distribution
 Basic functions
 Credit management/Risk management
 Simple credit limit check
 Choose sales document type OR
 Specify value
[ ] = No credit limit check
[A] = Run simple credit limit check and warning message
<b> = Run simple credit limit check and error message
[C] = Run simple credit limit check and delivery block
 Save and Exit
Define credit control area: Transaction code: OB45
Credit control area is an organizational unit that specifies and checks the credit limit for customers. A credit control
area can include one or more company codes. It means we can assign one credit control area to number of company
codes.
NOTE: Within credit control area the credit limit must be specified in the same currency.
Path:
 IMG
 Enterprise structure
 Definition
 Financial accounting
 Define credit control area
 Go to new entries
(OR)
 Choose existing credit control area
 Select it and click on copy icon
 Rename it and click on details icon
Specify currency [INR]
257
Data for updating SD fields
Update [000012]: Open order value on time axis, delivery and billing document value. This field value controls
when the values are open sales orders, deliveries, billing documents are updated in LIS. We can specify the
following update groups for updating credit related statistics.
 Update group 000012:
Sales order: Increase open order value from delivery relevant schedule lines.
Delivery: Reduces open order value from delivery relevant schedule lines.
Increases open delivery value
Billing document: Reduces the open delivery value, increases open billing document value.
Financial accounting document: Reduces open billing document value
Increases open items.
 Update group 000015:
Delivery: Increases open delivery value.
Increases open billing document value.
Financial accounting document: Reduces open billing document value
Increases open items.
 Update group 000018:
Sales order: Increases open delivery value
Billing document: Reduces open delivery value.
Increases open billing document value.
Financial accounting document: Reduces open billing document value.
Increases open items.
Fiscal year variant [K4]: It indicates specific fiscal year variant for particular credit control area. The fiscal year
variant is essential when a credit control area covers multiple company codes whose fiscal years are different. Then
the values of the open orders are updated by posting period.
Specify risk category [001]: 001 = High risk
002 = Medium risk
003 = Low risk
This risk category entered in the related control area of the customeru2019s credit master record, which is automatically
created when a customer is created in a company code.
The credit master record is automatically maintained when at least one of the below fields is maintained for the
corresponding control area.
(A) Risk category
(B) Credit representative group
(C) Credit limit
Credit limit: The credit limit that we enter here in the specific credit control area of the customeru2019s credit master
record. This is automatically created when a customer is created in a company code (in XD01).
NOTE: This credit limit is not a total credit limit for the control area.
Representative group [001]: Define credit representative group in IMG.
 All company codes: If we want to tell to the system that, this credit control area is permitted for
postings in every company code we have defined.
 Save and Exit
NOTE: After this create Risk categories and Credit representative groups and come back to this step and assign
these values to our credit control area.
Risk category and Representative group defined and maintained by FI/CO consultants in IMG.
258
Assign company code to credit control area: Transaction code: OB38
Path:
 IMG
 Enterprise structure
 Assignment
 Financial accounting
 Assign company code to credit control area
 Choose our company code from position button
 Click on assign button on the application tool bar
 Select our credit control area from the list and assign it
 Save and Exit
 Go to FD32 and check whether system created customeru2019s credit master data automatically or not.
System creates customers credit master data automatically when we (FI/CO) people) configure credit control area in
IMG.
So as to perform simple credit check we have to specify customer master payers limit in the credit control area, and
create customer master in XD01 transaction code.
 Specify reconciliation account number (GL account number)
 Payment history record: Check payment history record control in payment transaction tab. It is the
control parameter to update the payment details that are made by customers and system will show the
payment details in the FD32.
 Specify the credit control area in credit control area field in billing document tab.
 Save and Exit
 Go to VA01 and raise the sales order
Check the system responses in each and every level of sales document processing and check whether the system
blocked the delivery document (due to the setting in VOV8 of OR in check credit limit field [C] = Blocked for
delivery).
 To release the delivery go to VKM4 and release the delivery document.

Credit Limit based on Open Items only.

Dear Friends,
Is it possible to set credit limit based on Open Items only ( Document Type RV)
If the credit limit is crossed for accounting documents not yet cleared, then system should allow creating sales order, but block any deliveries further.
Just to add this, we are using Oldest Open Item, to make sure system blocks deliveries if even one Billing document is overdue for payment.
<< Moderator message - Please do not promise points >>
<< Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
Regards
Trupti Deulkar
Edited by: Rob Burbank on Dec 16, 2010 4:02 PM

Hi,
AT FD32,
For respective customers Credit Limit should be made 99999999....(i.e maximum)
Goto OVA8. Select the respective Credit Control area, Risk category & Customer Group.
tick-> OpenItems
Max.Open items 100% and Nodays Open here you can maintain the grace days (after the payment term limit expires) is allowed to do the transaction for respective customer.
if grace days are '0', then as soon as payment term limit is expires system will block the transactions selected.
Thank You,
RB.
Edited by: RB@007 on Dec 16, 2010 3:12 PM

Fetching AR open items and customer's credit limit to Collateral Management

Hi
Is there a badi that you can use to fetch receivables data (open invoices/items and credit limit) from FI-AR to Collateral Management System?
Answer: The badi Get Receivables has to be used
BAPI1010_6 u201ECreditAccountDetail
Other bapi of interest, :
BAPI_AR_ACC_GETOPENITEMS
BAPI_AR_ACC_GETCURRENTBALANCE
Edited by: EI18 on Sep 9, 2011 10:21 PM

Hi,
Open items check means it will consider all the open items when it is doing credit check. Here it adds all the open items amount and do the credit check..
Oldest open item means it will consider only the oldest open item and based on tht i will do credit check..Here i will check the oldest open item value and its date then do the credit check..
Coming to payment terms check, system is responding correctly.. because payment terms are immed due net. tht means still time is there in the same day. that is the reason it is not blocking the second document.
once move to 2nd day then it means first doc is not cleared tht is the reason it is blocking the 2 nd doc on 2nd doc..
Hope u have understand..
Regards
Sankar

Static credit check: credit limit exceeded for consignment issue delivery

Hi,
We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
In SPRO config "Credit limit check for order types", no credit limit check is assigned to the order type. However, there is one assigned for the delivery type. Also, for CCAr/Risk cat./CG combination in OVA8 (Auto Credit Block Delivery), static credit check has been activated with error message reaction. Open orders and open deliveries were also activated. Customer exceeded credit exposure but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Given that this is the current setup, and the following conditions:
1. Credit limit for the customer cannot be increased
2. Oldest open item cannot be cleared just yet
Is there any way that we can proceed with delivery creation for this customer? The other order types have credit limit check so credit management team was able to release them. However, we are unsure on how to proceed with this consignment order. Kindly advise and thank you in advance for your help.

We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Looks contradictory and it may need to run report RVKRED77 to reorganization of open credit values. Try to run the report in test system and then run in production system. After running the report, the use must be able to release in VKM* transaction.
Regards,

Static Credit Limit Check for Sales Orders - Net Value vs Credit Value

We are testing order credit check and we have run into a problem with the Static Credit Limit Check. The Static Credit Limit Check is set to use both Order and Delivery Values. SAP uses the values in S066 and S067 to determine what values it uses to check against the credit limit. Standard SAP uses the confirmed quantity times the credit price to get the order values - this is the credit value.
So the problem is, once an order is released it is set up so it does not go back on credit hold, so anything which is not confirmed (but could be) it a potential credit value which is unaccounted for in the credit exposure and the customer can go over the credit limit.
Additionally, we run AFS and have items which are rejected with a J0 rejection code (unconfirmed) which have the potential of being confirmed and shipped and we want to include these items in the value of the order which is being checked against the credit limit (along with the deliveries, invoices and receivables).
Here is a quick example.
Customer has a credit limit of $100 (no deliveries, invoices or receivables - to keep it simple)
Order 1 is placed with a credit value of $50.00 but a potential value of $100 (the other half is J0) - this passes the credit check since $50.00 is less than the limit.
Order 2 is placed for $50.00 and has a credit value of $50. This also gets approved.
At this point, the credit limit used is 100% (based on standard SAP)
Then Order1 backorder is confirmed and the new credit value is now $100. This order now puts the customer over their limit and if the order had been released would not go back on credit hold and therefore the customer is not over their credit limit by 50%.
What I want is for Order1 to be credit checked for the $100 not the $50 so the exposure is correct.
Does anyone have any suggestions as to how we could use the Net Value of the order to perform the static credit check? And any thoughts on how to determine the correct credit exposure (open order value plus items which are J0, plus deliveries, plus invoices, plus receivables)?
I am thinking about a Z table to track the adjusted values on the orders and then use one of the customer checks to do a static credit check with the adjusted value. And for the exposure, use the adjusted value to recalculate the values in F.35 to show a more accurate view of the credit exposure.
Does anyone have an easier way to do this? Any advice is appreciated.
Thanks,
Suzanne

Hi Suzzane,
In the scenario that you have provided, in the first order items worth 50$ are rejected. Hence standard SAP will not take this into account as this item is rejected.Two solutions can be provided here:
1) The line item can have a delivery block instead of a reason for rejection.This way the 50$ will get accounted.However, if this is against customer norms as this will appear in the order acknowledgment, this cannot be used.
2) User exit can be used where a credit check can be triggered once the document value changes, even though the document has a released status.
Hope this helps.
Thanks,
Vinu

Credit limit check cause the item schedule line confirmed qty empty

Hi,
I have an SO that is under credit limit check, the problem is, after releasing it via VKM3, the confirmed qty at item schedule line is not taking the qty as of stock at the time. The SO qty is 100 Pcs, but there's still stock of 80 Pcs. I will then need to split the schedule line to 2 lines --> 1st line with order qty 80 Pcs, and 2nd line 20 Pcs. Then only the confirmed qty appear for the 80Pcs.
For usual SO that is without credit checking, the confirmed qty will immediately shown as in 1 schedule line. Does anyone know why is this happening and can we amend this problem?
Thanks.

Hi
If an order is subject to credit check once you save the order the confirmed quantities becomes 0 because if the settings done in t code OVB8 Number of the routine used for copying is set as 101and System FORM routine number is set as 1 (and this is the standard settings)
This is kept like this in standard so that if a material stock is say 10 units and order from customer X has come for 10 units and that order is blocked on crediit limit so that when the next order from customer Y has come for another 5 units and this customer Y has a better credit limit and this order is not blocked on Credit limit check then she should not suffer for stocks
A genuine customer should not be deprived of stocks
For you between the order registered and released thro VKM3 another order has come from another customer for 20 units and hence the 100 units has become 80 now and balance 20 is confirmed for a future date thro forward scheduling
In T code OVB8 you can do the customizations for this scenario according to the business requirement
Regards
Raja

Credit Check not occurring for Customer with Partial Credit limit existing

Hi,
I have a scenario
1) where, if credit limit is crossed, then on creation of order I get an credit check even when i have not entered materials in sales order.
2) Partial Credit limit is pending (for e.g Credit limit of 100, 50 is still pending) when i create a new order with unconfirmed quantity, for amount 100, there is no credit check happening. (system should give message for extra amount 50)
Can I please get guidance on this issue.(2nd point)
Thanks & Regards,
Ganesh.

HI Ganesh,
Your issue is not clear. What do you mean by
2) Partial Credit limit is pending (for e.g Credit limit of 100, 50 is still pending) when i create a new order with unconfirmed quantity, for amount 100, there is no credit check happening. (system should give message for extra amount 50)
Please explain clearly
Thanks
Jobi

Dynamic Credit Limit check not giving error message

Hi!
I have configured the credit management like below:
1. high risk, medium risk, low risk category.
2. credit control area with update : 00000012
3. In pricin procedure for net value, routine "A" is given.
4. In Item Category, Credit Active tick mark is checked.
3. Assigned D, credit group 01(Credit Group for Sales Order) in sales document types.
4. assigned credit group in Delivery document types.
5. configured automatic credit control;
for high risk, with credit group 01 , dynamic check with reaction D , and status/block tick by considering open order and open deliveries .
My main aim is when sale order is creating, system should give error message , when credit limit is exceeded.
But system is giving following information message only:
     Dynamic credit check: credit limit exceeded (data
     cannot be saved)
     250.00 USD
that is only information message and allowing to save the sael order and delivery also.
can any one give idea where config is missed.
we have activated FSCM also, but no link to credit control area.
regs,
ramesh

Hi,
Check up at message control with OBA5
Regards
VG

Want to change payer and update credit limit data with out delete documents

Hi Expert,
I have a problem that user feed 50-60 documents ( Sale order & delivery ) with wrong payer. Now we want to change payer and shift credit limit data ( open sale order , open delivery ) from old payer to new payer is any option for this.
Thanks in advance
Regards
Suresh Kumar

Hi
Ideally in your case, you may have to delete the delivery documents and then recreate the deliveries after updating the payer in the sales order. This is because the source for the partner function in Delivery will be mostly updated as "from sales order" and hence it is not possible to change the payer in the delivery document.
In this case, you have to first find out the relevant delivery documents and delete them
Then you can change the partners in the sales order
Finally you can recreate the delivery documents.
However I would request you to do the following test before following this.
In the SO, change the payer without deleting the delivery. If the partner in delivery gets changed automatically then it is fine. You can ensure this by checking the delivery in DISPLAY mode.
If payer is not changing automatically then go to delivery in CHANGE mode and now check it. If the payer changes automatically now, you are spared with the pain of deleting and recreating deliveries once again.
If both of them fails, then the only way is to delete deliveries first, change payer in SO and then recreate deliveries.
This is applicable only if PGI is not yet done.

Unable to block or throw credit limit message while posting Sales Order.

Dear All,
I hv created new customer and extended credit limit through FD32, assigned Risk Categeory and set the limit to 10,000/-.
When i am posting Sale Order with 15,000 or more value, i am not getting any warning or error message while saving Sale Invoice. No block was set against delivery or billing in Sale Order.
Kindly guide me, which step i am missing. FYI, customer dont hv any open item or credit exposure as of now becoz he was new customer.
Regards,
Venkat

Option 1
If your requirement is to go ahead with warning message and allow saving the sales document, maintain A in VOV8 for credit limit check.
If you want to restrict creating sales order when credit limit exceeded maintain B in VOV8 for credit limit check.
Option 2
Now in OVA8 if you click on dynamic option. Make sure you satisfy these requirements
The customer's credit exposure is split into a static part - open items, open billing, and delivery values - and a dynamic part, the open order value. The open order value includes all not yet or only partially delivered orders. The value is calculated based on the shipping date and the credit horizon you specify in the adjacent field. For the purposes of evaluating credit, you want the system to ignore all open orders that are due for delivery after the horizon date. The sum of the static and dynamic parts of the check may not exceed the credit limit.
I would recommend with option 1, still if you want to go for option 2
Then click on Static and make sure you also select open orders and open deliveries.
This will happen if you select static
The customer's credit exposure may not exceed the established credit limit. The credit exposure is the total combined value of the following:
Open sales documents
Open delivery documents
Open billing documents
Open items (accounts receivable)
You can specify in the adjacent fields whether the system takes into account all open orders and all open deliveries.
Regards
Ravi.
I am sorry i wont be able to add further input than this.
Dont forget to reward points if you think it was successful

Block sale order in credit limit

Hi Expert,
I have configure the credit limit block.it working perfectly when customer match the credit limit..but if i use following example it didint work..
1.Customer credit limit : 100000.00
2.Total Credit Usage is 70000.00
if i am trying to create a sales order amount of 70000 it will allow to create ,according to the config which i have it should block ..
when i check the mcvr ,SO66 no data (Pl refer the attachment)

Hi Shatrughan Tomar
I liked your commitment to help others.
But, I like to know, how will your configuration can help OP? His/her customer credit limit is already utilized 70%. And OP claims his/her understanding/config is correct.
Can you elaborate with example, you configuration is achieving what?
In addition to that what all type of credits will be done?
Thanks, JP

Cred.lim.used field in FD32 not getting updated

hi All,
I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32
when I go to fd33 for a customer my Credit limit is 1,000,000.00
and Credit exposure is 1,138.28- but the %age is 0.00 %.
any suggestions
thanks,

Hi
Think logically how it will show the credit limit used in percentage just calculate
credit limit used*100/ total credit limit
1,138.28*100
1,000,000.00
will come to 0.11 % so system wont show it will consider only if it is more than 1%
regards

Sales Order released even though Credit limit exceeded VKM1

Hi,
I have got a scenario where a Sales order has been released(Delivery,Invoicing has taken place) even though the credit limit of the Customer has exceeded.
Steps:
The user check the order from VKM1 (push button check and save), but he didn´t release it, then checking the order changes we found that it was released by his user number.
The order at the begining was blocked but after running just the check it was released automaticly.
Checking from OVAK the document type has Automatic credit control.
On OVA8 the static check is activaded and also the open orders and open deliveries
What could be the reasons as to release of Sales order even after exceeding Credit limit????
Thanks

Hi Randall,
From your description it is clear that the sales order was released by the user unknowingly, so when ever you release sales order all the sudsequent documents (deliveries&billing) would be relesased. There is no fault with the process, the user would be hidding some facts, so there is no way out. If you want to block the order again, you make some changes at the delivery level or sale order level and save it, the sale order will be blocked again. Next time see that the release strategy should be restricted for the limited users only. This can be done by BASIS consultant.
regards
prasad

Credit Limit tolarance

Similar Messages

Maybe you are looking for