Credit management - Business functions

Dear all,
Can you please help me with what Business functions should I activate, to have available the FSCM Credit management?
What is the right secuence to activate this BF?
Thanks.

Hi Mark thanks for your answer, two additional question,
Can I install SAP Credit Management 6.0 (one system scenario) with in a system with release 6.0 and no ehp packs applied and then activate the Ehp later on after de installation of SAP Credit management?
If my account receivables is in release 6.0, is there any feasible reason to install SAP Credit management 3.0 instead of 6.0?
With SAP Credit management 3.0 in a one system scenario do you still need PI?
Thanks again.
Edited by: BPX PARTNERS on Oct 19, 2010 5:59 PM

Similar Messages

  • Credit management business scenarios...........

    Hi Gurus,
    Could you please provide few business scenarios (ex: pharma industry) where credit management is implemented in SD point of view. Because i need to prepare document( PPT)  for my client.
    If you send that would be reference for me and it would be great full to me
    looking for the good response.
    Thanks
    murthy

    Hi,
    Further to info provided by Ram and your query,
    Using simple credit check or Dynamic credit check will depened on the requirement the client has.
    If they want to consider period horizon to check credit then you can use dynamic check and if not then simple check, etc.
    So its not scenario dependent.
    Hope this helps you,
    Regards,
    Satish.

  • Credit Management Partner Functions

    Hi Experts
    I know that KM /KB are included in Sales Order / Delivery Header Partner Functions  for Credit Management.
    Want to know the PRACTICAL USAGE for eg Suppose Order is Created for Amt Rs 10000, what role KB /KM which r included in order partner function will play ( mail/ etc ) and how will it be used in SAP
    The standard system contains the partner functions credit representative (KB) and credit manager (KM) for credit processing. Both partner functions are allocated to partner type "PE". The credit manager is one level higher than the credit representative. Enter these partner functions in the partner determination procedures of the sales document header and the delivery header so that the partners involved in credit processing can be allocated and identified. Assign value "A" to the partner functions in the Access field.
    Rohit

    Hi Mark thanks for your answer, two additional question,
    Can I install SAP Credit Management 6.0 (one system scenario) with in a system with release 6.0 and no ehp packs applied and then activate the Ehp later on after de installation of SAP Credit management?
    If my account receivables is in release 6.0, is there any feasible reason to install SAP Credit management 3.0 instead of 6.0?
    With SAP Credit management 3.0 in a one system scenario do you still need PI?
    Thanks again.
    Edited by: BPX PARTNERS on Oct 19, 2010 5:59 PM

  • EHP4 Talent Management business function CA_HAP_CI_1

    Hi
    We have applied EHP4 and have ECC6 Basis 701 SP6 and HR 604 SP24 and Netweaver EP7.
    Has anyone experience of acitivating business function CA_HAP_CI_1.
    I have researched this functionality and know of SAP notes 1239427 and 1239426.
    It would be most useful if someone could advise on what steps they have taken when activating this business function and what other configuration steps have been done. 
    I know to activate it is done in the IMG under Activate Business Functions.
    Many thanks
    Julie

    Hi,
    This can be activated in SWF5 .Ask basis consultants to activate it.
    Cheers
    Kumar

  • Credit Management- Custom Functionality required when saving the credit cas

    Hi Experts,
    I have a requirement that I need to save some custom tables when ever I save a credit case. And this custom table should also need to have Credit Case GUID to be saved in it.
    So, could you please let me know if there is any BAdI that I can use to update my custom tables with Case GUID?
    There is one BADI that I found SCMG_CASE_FCODE_S. But I don't think that I can use this for standard buttons and Function codes.
    Please help me.
    Regards,
    Eswar

    Hi Found the BADI. It is SCMG_CHNG_BFR_STR_C

  • SAP Catch Weight Management - Business Functions (SAP Enhancement Package 5 for SAP ERP 6.0) - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    the EHP2 is now running on my system:
    For the installation on SAP NetWeaver 7.0:
    FINBASIS 602     CSR0120031469_0027395.PAT
    SEM-BW 602     CSR0120031469_0027396.PAT
    all informations can be found in:
    1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0

  • Intellectual Property Management - Business Functions for SAP Customer Relationship Management - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi,
    It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
    Best Regards,
    Sigrid

  • Credit management ECC 6.0 implementation

    Hi Experts/Gurus,
    One of our clients have done a technical upgrade from SAP 4.6c to ECC 6.0.
    Now they want to know what will be the timeline required for implementation of the Integrated credit management functionality of ECC6.0 in their SAP system if they go on for functional upgrade.
    Now following are my doubts:
    1) How to compare their existing credit management process/Functionality with the new ECC 6.0 integrated credit management functionality?
    2) How to decide upon the timeline required to implement the new credit management functionalityof ECC 6.0?
    Thanks in Advance!

    Hi,
    Its depend on your company upgrade strategies, compair 40. credit mgt. functionality & 6.0 functionality.
    then go for upgradre
    Heer I some comments on upgrade
    Upgrade Scenarios
    Customers who are motivated to upgrade to ECC 6.0 generally pursue at least one of the four key goals just discussed as the primary goal of the upgrade.
    Improved business strategy
    Sustainability
    Operational excellence,
    Lower TCO
    SAP takes three major approaches to upgrading, each driven by a different motivation and leading to a different ROI and payback periods.
    u2022 Technical upgrade:
    Focuses on risk mitigation and sustainability of the existing SAP solution.
    u2022 Functional upgrade:
    Focuses on reducing TCO by reducing system complexity u2013 for example, by returning custom modifications and custom code to SAP standard code
    u2022 Upgrade with strategic business improvements:
    Considers major reengineering and implementation of new strategic business applications as part of the project scope. These approaches are summarized below.
    The three major approaches can be complemented by other compelling changes such as system landscape consolidation, the implementation of shared service center(s), and so forth.
    In summary, the more your upgrade decision is driven by business improvement goals, the better your expected ROI. Upgrade experiences and customer statistics confirm that the decision for an SAP software upgrade is usually determined by a mix of business, technology, and strategic criteria.

  • Letter of Credit functionality and Credit Management

    Hi,
    we want to use Letter of Credit functionality for exports.
    Currently, we have an ERP system that contains the sales data. In a separate system we have the credit management functionality (Financial Supply Chain Mgt - FSCM).
    When order is created, the credit limit is checked in the FSCM system (via PI messages).
    Now, we want to link some of the Sales orders with Letter of Credit. I believe, this is standard functionality in GTS.
    So when Sales Order is created a LOC should be connected to this.
    Can the GTS be connected also to FSCM credit management, so credit limit is not affected?
    Example:
    Sales Order value: 1 Mio USD
    10% down-payment  >   this would be in the credit exposure visible (net exposure).
    90 % covered through LOC  > credit exposure should showing this, or it shows order value and in a negative figure this amount deducted so no effect on exposure.
    Down-payment has no relation to LOC. When money is received for this the net exposure of the sales order is 0.
    partial invoice: 0.4 Mio USD > it should be possible to link this invoice to the LOC. The posting FI document should have some LOC information, so when payment comes in the amount in LOC is reduced as well as in credit management this open.
    Final invoice 0.5 USD: as above, all values go out from exposure if there are any.
    A second case would be guarantees, where there is no reduction of values. This would stay same.
    Anyone who can advise a solution here?
    Thanks + Regards
    Hein

    Letter Of Credit can be used as a standard solution of SAP GTS with ERP solution. Yes you can connect both SAP & no SAP systems with GTS, but plugins, PI etc needs to be built in. But it would not be real time like RFC works. There are some standard available which needs to be hard coded to meet specific requirements.
    Connecting LOC to Sales Order, invoice etc, is manual, based on business specific parameters and it comes standard with SAP GTS. Maintaining Values & Quantity of LOC based on actual LOC from bank is also possible. The depreciation of values & quantities is also standard with in LOC in GTS.
    You can also setup various communication methods for LOC.
    I think when Invoice is raised and payment is received the LOC should be closed in the system. There can also be other scenarios where in system determines LOC based on predefined logics for determination strategy put in to the GTS system.
    Cheers,
    Abir

  • Business Partner -Credit Management

    Hi Experts,
    I am facing a tricky situation. This problem is coming in Credit Management(FSCM) of Business Partner (Transaction - BP).
    My Functional Consultant has activated the Credit Management role in business partner. I added some of the table in BP by using EEWB. Now, There is a push button called 'Import data' in 'credit profile' tab. My requirement is like this - when the push button 'Import data' will be pressed, one XML file with full data of Business partner would generate. My question is where i have to write code for generating XML file or which BADI i have to use? I have already tried with all methods of BADI 'UKM_CREDIT_INFO' but this BADI is not working when i click the pushbutton.
    Can any expert suggest me.
    Thanks in Advance.

    Hello Shirish,
    Did you resolve this issue? What BAdI and method you used to fix this issue.
    Thank you

  • Business Package for Credit Manager

    Hi Experts,
    I'm trying to install the Business Package for Credit Manager (version 1.4), but I can't find any installation / configuration guides.
    Here's information about the Business Package.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/68/81091aded544349526a18839d760b5/frameset.htm
    So far, it's installed on our Portal but not working. Normally, I have to add system alias names, add roles, configure JCos etc. but I can't find any information about what's required for this Business Package.
    If you can shed any light on how I can get it working on our Portal Iu2019d be very grateful.
    Kind regards,
    Andrew

    Many thanks, great find but still can't get config info for the Business Package...see quote
    In SAP Credit Management you can use a wide range of analysis and processing functions in SAP Enterprise Portal.
    For more information on Business Package for Credit Management 6.01 and SAP Enterprise Portal, see the Internet at http://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio.
    This link doesn't work and it's refering to cofiguring a BP that's two versions older than the one I've installed.
    I've checked the updated Content Portfolio and it just sends me back the link I posted in the question.
    Thanks,
    Andrew
    Edited by: Andrew Barker on Dec 8, 2009 3:17 PM

  • Credit Management requirement for cash business

    Hi Gurus,
    Actually my client business is a cash business, there is no credit concept for the customers.
    My requirement is when i create a sales order, system should check the credit balance of the customer(Business receives the payment through cheque and entry is made in f.28 transaction) and should compare with the current document value and if it exceeds, then system should through the error.
          And if any open sale orders exists for this customer, system should even consider those values while credit check is happening.
    And the exceptions for this requirement is
    1.Credit check option should be there only for specific case of customers i,e based on account group of   customers.
    2.There are  very few customers(around 5) where they give credit.
    Pls guide me, early resposes woould be highly appreaciable.
    Thanks in advance
    Regards
    Mahendar.

    hello, friend.
    you can consider using the payment guarantee scenario in credit management. the customer advance payment could be treated sort of as a financial document or payment card.
    as for the selective application of credit controls based on customer group, i believe you do this be configuring risk categories and assigning them to the appropriate credit account master data.
    regards.
    Edited by: jonathan y on Apr 24, 2009 12:57 PM

  • Business Function Set: Enterprise AddOns in Solution Manager

    Hello
    For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.

    Hello Marc,
    the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
    Best regards, Alexander

  • Partner function relevant for the credit management.

    Hi,
    Which partner function is relevant for the credit management.
    Regards
    Prabudh

    Hi Prabudh,
       Check this link.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0fde72f-8216-2a10-6e87-e69ab79cb24f
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
    Much Regards,
    Amuktha.

  • Talent Management Enhancement pack 4  Business Function HCM_TCM_CI-1

    This business function contains some new job architecture functionality that we would like to utilize.  These new object types are functional name (FN) and job family (JF).  We do not plan to configure any of the talent management functionality because we will not be using it at this time.  Activating this business function also activates a functionality called Embedded Search which requires TREX 7.1.  We do not plan to do any of the configuration for the embedded search functionality either at this time as we don't think we will need it.
    My question is, is anyone aware of any issues that might arise  or what other SAP functionality that might be impacted by moving this business function into our Production environment without doing any of the configuration.  We have implemented SAP Payroll, Benefits, Org management, Personnel Administration, eRecruiting and Learning.
    Thanks in advance for any advise you can provide.

    Hi Kathy:
    In a nutshell, you shouldn't run into any issue.  You're just going to get a host of new web dynpro apps, OM data, and infotypes for the Central Person (the 74XX infotypes).  If you don't use them, then that's fine, it won't hurt anything.
    You should be just fine using the HRP1001 450 relationships from JF to FN and C to help drive your job architecture.  You would potentially need to use transaction HRTMC_PPOM to manage your job family/functional area relationships, but you won't negatively impact anything you have already implemented.
    If you're not going to use any of the Talent Mgmt functionality, you also don't need to worry about enterprise search or TREX.  I'm assuming you aren't using Succession Planning in eRecruiting, right?  If you do ever consider using the Talent Management functionality you've now implemented, you will have to migrate data over from the old eRecruiting version of Succession Planning.  Other than that, you should be good to go.
    Hope that helps!
    Thanks,
    Chris

Maybe you are looking for

  • How to create a form where one user cant modify information entered by another user.

    First time using Acrobat. Very newbie on this. Company wants me to create forms.  As an example, new hire form where HR sends form to one department, they write in information as to what the user needs, etc. Then they send form to another department

  • Why can't my Ipad2 connect with any bluetooth devices?

    My Ipad 2 cannot connect to anything. I bought a keyboard that is compatible with the Ipad 2 recently, and when i tried to connect them an error will always occur. My Ipad can see the keyboard so i click on it, and it tells me to put a pin number on

  • Image Capture can't delete items on iPhone, shows 'locked' graphic

    I can't seem to press the 'delete' button or use the delete key in Image Capture. When selecting the images, it remains greyed-out. There is also a 'lock' image next to all the files. How can I delete these?

  • Hiring Employee.

    Hi, I am able to hire an employee through PA40 , it dynamically updates IT0003. I am trying to hire an employee through hr_maintain_masterdata . It does not update IT0003 and produces a short dump . What may be going wrong? Thanks, Rohit

  • Refresh program cache

    Hi, i need to refresh program cache. My problem is: - run the program - call a FM - change data - call the FM (again) to refresh data. The fm gets the old data. How can I solve?