Credit Management- Custom Functionality required when saving the credit cas
Hi Experts,
I have a requirement that I need to save some custom tables when ever I save a credit case. And this custom table should also need to have Credit Case GUID to be saved in it.
So, could you please let me know if there is any BAdI that I can use to update my custom tables with Case GUID?
There is one BADI that I found SCMG_CASE_FCODE_S. But I don't think that I can use this for standard buttons and Function codes.
Please help me.
Regards,
Eswar
Hi Found the BADI. It is SCMG_CHNG_BFR_STR_C
Similar Messages
-
Debugging customized function module when Idoc is triggered via ALE
Hi,
Whenever we save the billing document, an outbound idoc is triggered via ALE. The logic for the data to be included in the idoc is written in a customized function module.
However we are making some changes and would like to include some more data in the idoc. But we find that when we put a breakpoint in the function module, on saving the billing document, the flow does not stop at the break point. We are 100% sure that the code in the function module gets executed based on the data in the idoc.
How do we get into debug mode and break the flow in the function module so that we can debug in the function module?
Any help would be greatly appreciated.
Thanks in advance,
MickHi Mick, this might be of some help 4 u.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
cheers,
Hema. -
In VA02 transaction which exit is triggering when saving the data
hi all sap gurus,
In VA02 transaction which exit is triggering when saving the dataHi Reddy,
The <b>user exit</b> and badi tried for this transactions are
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
<b>Business Add-in</b>
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related billing
<b>Reward pts if found usefull :)</b>
Regards
Sathish -
Is it possible when saving the psd file to have an automatic jpg file saved at the same time?
My work involves preparing images for printing lightboxes and window installations. My clients require to pre-approve the photos before printing.
I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size. This makes it possible for me to add these to a presentation and and send them to my client.
Is it possible when saving the psd file to have an automatic jpg file saved at the same time? Or do I still have to do this manually?If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette. You may be able to write a Photoshop that would do as save as Jpeg, And you should be able trigger its execution by setting up a Script Save event using the Script event manager. When You do a manual save the script should be triggered. I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event. I have only use open events.
-
User Exit or BADI for IW31 when Saving the Service Order
Dear ABAPers,
I would like to add one more line in Service order item when saving the Service order in (IW31) at runtime.Is there User Exit or BAdI.It is very Urgent Please help me.
Thanks & Regards,
Ashok.Hi
U can go through the tansaction.
System/ Status
Double click on program name.
For badis:
Search for the Phrase:
cl_exithandler=>get_instance.
U will the badi definitions.
For User exits:
search for the phrase: CALL CUSTOMER-FUNCTION
u will get the user exits.
If it is helpful rewards points.
Regards
Pratap.M -
Print program is not getting triggered when saving the application
Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
UmeshHi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar -
Inserting Pricing condition in Sales order when saving the sales order
Dear ABAPers,
My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
How to do this.
Thanks & Regards,
Ashok.Dear ABAPers,
I have Solved this Problem.
Thanks & Regards,
Ashok. -
User Exit or BADI for Tcode IW31 when saving the Service Order
Dear ABAPers,
I would like to add one more line in Service order item when saving the Service order in (IW31).Is there User Exit or BAdI.It is very Urgent Please help me.
Thanks & Regards,
Ashok.Dear ABAPers,
These Exits does not meet my requirement.
These Exits are not called at the time of saving Service Order.
Thank you for your valuable reply.
My Requirement is when saving the service Order i want to add the Line itm at runtime.
It is very urgent requirement.Please help me.
Thanks & Regards,
ashok. -
ORA-01403 no_data_found when saving the record in the custom form
My custom form has 2 windows with 3 blocks. The first window has the BATCH block while the second window contains the HEADERS and LINES blocks. User go to first window, enter the batch info and save the record with no issue. Now user go to second window, enter the header info and save. Now we have the ORA-01403 no_data_found error. My custom form only have few SQLs and I put exception blocks on all of them but no_data_found still shows.
Besides explicitly-used SQL statements, I wonder where else may have triggered the NO_DATA_FOUND error?
Thanks, Mike.Hi!
If an exception is raised in forms and an exception handler
tries to show the dbms_error_text function, you will get
the ORA-01403 no_data_found message too, if there is no database error.
Regards -
Error getting when saving the sales document in third party sales order
in third party sales order,when i am saving the sales order i am gettingthe following error
subsequent function 'purchase requistion from sales document' not possible due to credit block.earlier i have maintained credit checks for some customers,but for this customer i have not maintained any credit check. i dont know why system is blocking for this customer also.pls help me where i went wrong.
highly rewarded if help full.
thank youPlease go to FD32, check any default risk category and credit limit is maintained for the customer.
Also check OB45, any default risk category & credit limit is maintained for the credit control area.
Also, which order type u r creating sales order? for that order type, Goto VOV8, remove the credit grp and credit check settings.
Also goto XD02, check in sales area data, billing tab, credit control area field, please remove that also.
Hope it Helpful.
Reward points if useful.. -
Transfer of data from flexible planning to PIR table when saving the trans.
Dear all.
I have a query regarding Flexible LIS Planning (MC93 or MC94). My question is about on transaction MC94. When I save the data on this transaction, it automatically transfers to PIR (Planned Independent Requirement) table. I donu2019t know how this been done by the consultant; is this a configuration, abaping or any enhancement? Any one has any idea regarding this please advice.
I am very thankful for your help.Hello,
This is 100% SAP standard functionality.
Go to transaction MC7F.
There, pick your Info structure SXXX and go in the details of it (CtrlShiftf2 or loop icon)
In the bottom right of your screen there is a block called "synchronization of planned independent requirements".
Delete the data that is there or simply untick the requirement "active" check box.
Alternatively, in that same screen above in the right there is a block called system paramaters - the least setting is transfer to demand management with user exit - uncheck that.
Hope it helps. -
Create a Time Management Custom Function in PE04
Hi Experts
Pls give the steps to create a custom function in Time Management using PE04,
whta is purpose of using infotype in PE04 , what are the input parametr and output paramaete . What are the intrnal table available in custom function . How we can test the custom function .
Thansk and regards
Renjith MPNo idea on how to set.
But in our case, we have a requirement for calculation of GOSI for our Bahrani Employees. Hence did the same using by creating a FUNCTION ZGOSI.
We have not given any input or output parameters.
Used a Z program for payroll driver RPCALCX0 -- ZSH_GOSI_CALC and the calculations are taken from this program and output is displayed in the RT table- Wage types.
For more information, check with functions of infotype like P0014, P0015, you will get some idea on the same.
Before giving the above, need to mention the parameter list for control.
Mostly the input parameters are given as Objects like in our Payroll Process, there is WPBP table and output parameters the results to be displayed using object RT.
Analyze more on the same and you will come to know.
Good luck.
Regards
Team Member. -
Ps assembly processing:WBS have not be created when saving the sales order
In the ps assembly processing, I want to generate a network when I create a sales order. So I did the following steps:
1-Use the TCODE cj91 to create a standard WBS "E-000007.1".
2-Use the TCODE cn01 to create a standard network "10000000" and assign the standard WBS "E-000007.1" to it.
3-Use the TCODE cn08 to config the Network Parameters from Sales Order like below:
Material number : 600000-000000-0009
Order Type : Z301
Std network : 10000000
Class Type : 020
Network Profile : Z0001
MRP Controller : 001
Std WBS element : E-000007.1
4-Use the TCODE va01 to create a sales order and add an item with the material "600000-000000-0009" and save.
When the SAP R/3 System is saving the sales order, a WBS ought to be created u2013 based on the assignment of the standard network to the standard project.But I could not found the WBS.I thought I have do all of steps and could not found the reason.
So I need the experts give me some useful advice and reference to resolve the problem.Thank you.
Regards
YodaHi,
Maintain strategy group in material master MRP tab....
If problem still persist then check is there any credit block to that customer...if it is release it in VKM3....
Once you release it will create automatically.
Regards -
User exit when saving the financial document (VX11N)
Hi,
We are creating financial document as a letter of credit using transaction code VX11N. User would like to have some checking on the fields based on some user defined logic. Is there any user exit that can be used to serve this purpose. I am looking to usre exit similar to when saving sales order (i.e: USEREXIT_SAVE_DOCUMENT in MV45AFZZ).
RegardsHi,
Check below link for all SD user Exits.
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
Best regards,
Anupa -
HI all,
Iam creating a standard RFQ manually through purchasing>RFQ's and quotations>RFQ.
But when iam saving the RFQ, iam getting an error like,
Please enter the required value for the Purchaser's Phone Number segment in the PO Headers flexfield.
Please help me to get rid of this error.
with regards
vijayHI sandeep,
Your reply solved my purpose. Can you also please tell where That particular Flex field is located in PURCHASE ORDERS window.
Thank you,
vijay
Maybe you are looking for
-
CS5 Bridge Photo Downloader Question
Hello- Whenever I download NEF files from my Nikon D300 I get two files per image eg. DSC1901.NEF and DSC1901.xmp I don't understand the purpose of the .xmp file, I've never had this happen using the Nikon software. If I trash the .xmp I see no cha
-
Dynamic configuration - missing files
Hi, during processing of message Dynamic Configuration is used. Inside SOAP response is written file name and Directory where file should be generated. But file is missing.. Message seems to be processed successfully. Any idea what could happen? M.
-
Hello, I have learnt how to use my IPAD but something is strange I don't know how to get the photos downloaded on my ipad over the internet to my computer! There is nothing on the menu to get them?! any help welcome thanks
-
I own elements 9. All files were backed up to a external hard drive and then downloaded to a new PC, with windows 8. I have lost all my pictures, albums and tagging. How do I retrieve all of this back into Elements 9?
-
I'm still having connectivity issues
And now, an Iphoto update was interupted while downloading and is now corrupted. Can someone please help me fix the connectivity issue once and for all and guide me to correcting Iphoto. Appreciate your help. Cheers, MK James