Credit Management- FD32

Can anyone pls tell me, how the value against the field "Sales value" is getting calculated/reflected in FD32 , for a particular customer?
For a particular customer, there are NO open SOs ( in VA05),but still some value is reflected in FD32.
Request an expert, who has worked in credit management to help me on this.
Rgds
Sumanth G

HI
Sale Value = Open OrdersOpen DeliveriesOpen billings
If you want to know clearly
Go to FD33 , enter the details and press enter , in the overview screen , Extras-->Sales value
Regards,
Prasanna

Similar Messages

Credit Management-Sales value updated in FD32 even though credit set up is not active

Dear Team,
We are facing an issue where, for a sample order - sales value got updated as open sales order value against a customer in FD33.
Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD). Since this has occurred in 2003, we have no clue what exactly has happened. We cannot locate any change logs in the configuration level.
1) What is the possibility for credit management to be active for a document type, which was not meant for credit set up?
2) How to remove the open order/ delivery value for the customer?
Thanks and regards.
Sivarajesh

Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD).
the above two settings are credit checks at what level( example order level or delivery etc) you what to block the customer if the customer payer exceeds the credit limit.
Where as if the credit active field is active in VOV7 in corresponding item category, system update the respective document values in to credit management (FD32/33) in your example open order value.
Even though OVAK, OVAD settings are not done still system update the document values in to FD33 subject to credit active field is active in t code VOV7 .
Please check in your item category whether credit active field active.
thanks,
Srinu.

Payment History In Credit management

Hi all,
How to activate the Payment History in Credit Management(FD32).
Regards
Talluri

Hi Talluri
If you want to activate payment history in FD32 then in XD02->Company code data tab->payment transactions tab check the box payment history and save it
Now when you do billing and forward it to FI for the blocked documents then the payment history will be updated
Regards
Srinath

Credit management-sales value

Hi
Sales value showing incorrect value in credit management(FD32-Transaction code)
Sales value is determined based on following formula
Sales value = Open delivery/invoice - Open order
Open Delivery/Invoice: 162,812.52 (go to environment>sales and distribution doc > Open delivery/Invoice
I would like to know that what are the Open delivery number. Because by checking open delivery status the value is not matching with above Open delivery value = 162,812.52
Kindly let us know how to get delivery no/Invoice no to identify and match sales value.
Regards
Pinal

Hi Pinal,
Please check the T code VF04 which shows all the Open Deliveries which have PGIed between a particular date range.
Sum of all these open deliveries will give the Open Deliveries value.
Regards,
MP

Down payments u2013 Credit Management, Sales Value FD32.

Hi,
We have a problem with the credit management in Down payments. The down payments requests are not decreasing the Sales Value of the client. I mean when I bill a down payment, the sales value of the client in transaction FD32 keep with the same value. I have to bill the next milestone where the down payment is cleared to decrease the sales value of the client.
Billing Plan
1º Down payment 200
2º Final Billing 1000
Bill the down payment. Sales Value FD32 = 1000. It should be 800?
Bill the Final Invoice. Sales Value FD32 = 0.
Are there any way in the customizing to modify this behavior?
Thank you in advance and best regards.

Hello Alberto,
As you mentioned down payment of 200 and final bill of 1000, generally down payment is received at the start of activity. If you have credit limit say 500 and you receive down payment of 200 then system store down payment in separate GL account and when you carry out business, system first consider consuming down payment and then credit limit. So down payment never consider as sales till it get cleared off as it is before start of business as extra security to manage risk
Same thing happen when you do business with letter of credit
Hope this will resolve your confusion
Regards,
Mukul

Open Sales Order Values in Credit Managment

Hi,
1. I want to include the open sales orders that were created before implementing the functionality of Credit Managment. How to check the credit limits for that sales orders.
Fro Example. If i want do the credit checks for 1000 open sales orders.
2. How to reset the customer credit limit in FD32. I tried using the t.code f.28, but it will not be reset to zero(0).
Thank you,
Ravi

Hello Ravi,
You can try this: in table VBAK, you might have the date when this a particular order was created( ERDAT or sometihng like that..). You'll have to join table VBAK/VBAP/VBRK(billing table)/VBFA and the logic should be that the program should pick up all the orders created before 1 yr and should also check that the items are not rejected, and the delivery not yet created.
Check the following fields:
VBAK-ERDAT, VBAP-ERDAT, VBAP-ABGRU, VBAP-AEDAT.
Regards,
Raghu.

Open Delivery value update error in credit management

Hi
We have credit management active at delivery level. The value of open deliveries is not getting updated correctly for items with material substitution (material determination). For all other items, its getting updated correctly.
E.g Let say the credit limit set in FD32 is 10000 and the credit limit used % is 98 and the credit exposure value is 9800.
Now when I create an order with qty 10 for mat A, it creates a sub item B due to material determination and the value of the item is Rs.1200. In our system, the sub item with TAPS item category is relevant for pricing.
Then I create a delivery in VL01N and save it.
Now if i check in FD33, the credit limit used should be 101% and the credit exposure value should be 11000, but its not updating the open delivery value correctly. Its not considering the value of the new delivery.
However, If I add a normal item (TAN) in the same sales order and create a delivery for that item and save it, its updating the credit exposure based on the value of the normal item in the delivery correctly.
How to make the system update the open delivery values correctly by taking the items with material determination also into account.??
Please advise if any specific settings need to be done.
Regards
Madhu

Hi,
the system updates open values for credit management. These are:
Open sales order credit value (S066-OEIKW)
Open delivery credit value (S067-OLIKW)
Open billing document credit value (S067-OFAKW)
The system updates the open values in standard SIS structures S066 and S067. Technically, the structures are transparent tables. You can display the contents using transaction SE16 or using table maintenance.
The S067-OLIKW will give the open delivery credit values credit.Check in you system whether this table is updated with the delivery values for the credit account(customer number)
RVKRED77 u2013 Reorganize SD credit data
When updating errors occur, it enables you to reorganize the open credit, delivery and billing document values.
If the table is not updated run this report in background.
Regards,
Saju.S

Credit Management - Maximum time overdue limit for open item

Dear all,
I've this scenario to configure for automatic credit control. A customer is billed on Jan 22nd '10 and now the account receiveable shows an open item. This customer is allowed 52 calendar days to make payment for this invoice, hence no credit block yet. As such, the customer can still make orders.
In my existing configuration, I've already enable "static" credit check on "open orders" and "open deliveries". The static check is to check against the customer's credit limit.
So, if I were to add in the earlier mentioned overdue open items check, is it sufficient to just maintain the field "Days oldestItem" with "52" within the automatic credit control screen?
Thanks.
Steven

Hi
The sytstem will shows oldest open items depending on the payment terms from the invoice date.
Once it crosses the days of payment then it will show in oldest open items
if you want to extend some more days for that then you need to maintain the days in "Days oldestitem" the automatic credit control area
Prerequisites for credit management to work in Sales and Distribution:
1.Assign credit control area to company code
2.Maintain the credit limit in FD32 with details of risk category and the credit limit value
3.Do the settings in OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group.
4.Assign the credit groups to the sales and delivery document types.
5.Maintain the Subtotal 'A' in the pricing procedure against which value the sytem should check the credit limit.
If you have any further clarifications on above let me know
Regards
Damu

Credit management

We have open sale order for a customer after which the credit management was activated. In FD 32 the credit limit was set.
The risk category used is 006.
We have used static check. We have ticked on open orders and open items.
We want the system to prompt at the sale order level if we are trying to change the quantity.
After maintaining the master when we create order and if it exceeds the limit we are getting the error message that credit limit exceed by -
value.
For orders that are raised before fd32, we are not getting the error message.
Could anyone please guide

Hi Pooja
In OVA8 , for static check change the Reaction box to error and then check , but generally the open orders, open deliveries work for dynamic credit check and not for static credit check
Regards
Srinath

Credit Management Process based on Terms of Payment.

Hi All,
My Client wants to use SAP Credit Managment Process. The SAP is currently being used but without Credit Management. As per my initial discussion I have enclosed the requirments below. Your Kind Help will be highly appreciated.
1.     The Process has to be implemented in a 2 Step Process.
2.     The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
(Is there the standard Process in Credit Management based on Terms of Payment)
3.     In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
Thanks & Regards,
Sam.

Dear Mr F Farooq,
1. The Process has to be implemented in a 2 Step Process.
Do the following configurations for credit management :
Refer the following link.
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditManagementConfigaration
2. The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
(Is there the standard Process in Credit Management based on Terms of Payment)
Now for this requirement, since different billing documents for the same customer can have different payment terms (whcih means different billing will be due on different date) , please make the following changes in OVA8
Check for 'oldest open item'
Now follow my reply in the below thread.
Sales order to be blocked based on customer payment terms and credit limit
You can use WORKFLOW to trigger mail when such a message is triggered in the sales order , due to credit check.
Ask your ABAP-er for details on workflow.
3. In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
Just configure according to the thread given for 1st POINT.
CHECK FOR DYNAMIC and set reaction as 'C' and check STATUS /BLOCK.
Maintain the credit limit in the FD32.
Now when the sales order value exceeds the credit limit , a message will be triggered.
Use the concept of WORKFLOW to create mail based on this message .
When the user gets mail, he can maintain the new credit limit in FD32 and release the document for delivery/billing in VKM3.
Revert back if there is any issues.
Thanks & Regards,
Hegal K Charles
Edited by: Hegal . K . Charles on Aug 7, 2011 1:19 AM

Credit management automatic credit control use of credit group

Hello gurus
1)In the credit management we have credit groups( which enables us to combine different sales
document types for the purposes of credit management).
In the simple credit check also we will assign the doc types to check the credit. Then please tell me why we need credit groups in automatic credit control? Here also we can assign the doc types to check the credit ?then what exactly is the use of credit group ?
2)where will we specify the total credit amount allowed of the credit control area?
3)In the automatic credit control (ova8) against to static check box option we have open orders and open delivers checkboxes. is this two boxes only specific to static or it also belongs to dyanic?
Is it necessary to check this boxes?
4)is any one have used any of the routines in automatic credit control( document controlling tab we have no credit check field here we specify the routine? If any business need please share with me
Thank you in advance for all the replies

Hi
For your 1st query , In credit mgmt we assign credit grps to sales document type. So as you said we will assign credit grps at simple credit check and coming to the Automatic credit check we assign credit grp for the sales document type also .But the difference is credit grp can be at order level or Delivery Level or PGI level in OVA8 in Automatic credit check .
Coming to your 2nd Query , we will specify the total credit limit in FD32.
For your 3rd query , In OVA8 apart from the static check we check the boxes open orders and open deliveries also because once you activate Automatic credit check and once you maintain credit limit for any customer then system will check the open orders and open deliveries also of that customer
Coming to your last query the routine feild can be used when some requirements have to be fulfilled then only automatic credit check should work for customers. or else the sales order ->delivery->PGI will happen normally
Regards
Srinath

Credit management activation with letter of credit

Hi Sap guru
I have one queries regarding customer credit limit effect with LC document.
If i creating one LC document for customer after assign to sales order for that perticular customer, it should effect the credit limit of that customer.
In which field it should effect the custmer credit master FD32.
in secured liability field , secured receviable field , or the receviable field .
Can any body tell ,me what is the process of LC attachment with sales order if the credit management is active in company code , and what is the effect in customer credit expouser.
Thanks in advance .
Regards
Anjan Kumar Jha

Hi Anjan
It is the aim of every credit policy to reduce the risk represented by customer receivables.
Along with Credit Management, several other Payment Guarantee Forms within the
business processes are explored. These include letters of credit and payment cards.
These payment guarantee forms differ in the level of security they can offer and are all
integrated within Risk Management.
When a payment guarantee is used (for example, a letter of credit), the system first tries to
provide the optimum in risk minimization. If this is not possible, then Credit Management in
a second step is used to create a credit limit and therefore restrict the level of risk.
Letters of credit are used predominantly for large -scale export transactions, whereas cre dit
while Cards are more important for Retail transactions.
You create a Letter of credit by using VX11 after creating that you assign that in billing tab of sales order in risk Management Financial doc number.
keep in mind the incoterms of Letter of Credit and Sales order should be same.
Reward if helpful
Thanks & Regards
Abhishek Swarup

Use of Letter of Credit(LOC) in Credit management.

Hi,
How can i link LOC to Credit management?
I have a requirent suppose I have set a credit limit of 100000 for a customer.
I have received down payment of 20, 000 and there is LOC of 80, 000 then my system should consider downpayment(Which it will consider in special liabilities in fd32) and LOC value when checking the credit limit.
Is it can be done through standard process or will have to go for any user exit ?
Manish

Hi
U can go with the standard.In Sale order at Header level in Billling Documents after giving the Fin.Doc No.we have a field Depreciation % which specifies what amount has to be calculated from the LOC. in your case enter the value 80000 which covers from LOC and the remaining from credit master record.
Hope this will helpu.
Regards
Sujith

Customer Credit Management Change

Hello Gurus,
I am trying to implement credit management and when i am using FD32, i am not able to enter anything in the fields other than Horizon. What should i do in order to maintain credit management completely. Please help. Thanks.
Regards,
Pranava

Dear,
    Please go via this link,
     [http://www.sap-img.com/sap-sd/credit-management.htm]
     please search the thread before posting your question.
Regards,
Sandip

Regarding open items in credit management

Dear friends
My query is that is it possible to restrict credit management for credit and debit open items? See i am using oldest open item blocking in my scenario. Now credit and debit amounts are both considered as open item for credit management. I want only invoice (Debit entry) for consideration and not his payment(credit entry).
Please advise is it possible or not and if possible where to define that???
With regards
Inder

Hi,
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
V_TVTW Define Distribution Channel
V_TVTA_KKB Assign sales area to credit control area
V_T014 FI - Define Credit Control Area
T001CM - FI Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel Division Distribution Channel Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
Check Credit
A Credit limit check and warning message
B Credit limit check and error message (no sales order can be created)
C Credit limit check and delivery block (block delivery if hit credit limit)
Options B and C -> used for checking open order values (when you create/change the sales order)
D Automatic credit control with open order values
More control in transaction OVA8 - Automatic credit control
You check for open orders and deliveries, or just open deliveries.
or open order values with other options
Credit group
Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D automatic credit check).
SAP default credit groups
01 credit group for sales order
02 credit group for delivery
03 credit group for goods issue
OVA8 - Automatic credit control Double click on the line items
You can have the followings credit limit check :-
Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
Oldest open items
If you dont want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the NextReview date and Number of days fields and combined it with the Last int.review field in customer credit master Status view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
regards,
Siddharth.

Credit Management- FD32

Similar Messages

Maybe you are looking for