Credit Management functionality not working properly during Delivery Execut

Dear All,
Complain from the Client: While creating Delivery documents the system permits the creation of Delivery in some cases when the Customer's Credit Limit is not sufficient to allow Delivery creation.
Findings: After detailed analysis of System Configuration and transactional work flow following significant findings were noted;
1.     Risk Category assignment & Credit Control Area assignment is no disabled at any stage of the business process in discussion.
2.     The Delivery was created with transactional Credit Status "A" (Credit Approved) in cases when it should have been Credit Status "B" (Credit Not Approved) as the customer account did not have sufficient funds to accommodate the delivery.
3.     Following Deliveries on PRD which were reported to have the above mentioned error, i-e, 80207442, 80224422, 80228126, 80230859, 80230863, 80230864, 80231004, after checking the deliveries it was established that system was not changing the Credit Status at Delivery Level to "B" in cases when it should be "B" rather than "A".
4.     The above scenarios have been configured and checked in the QA server, where system reacted as per the standard and no discrepancy was identified.
5.     If the user deleted the delivery which had the bug reported as above, after deletion of that delivery and recreation of the delivery referring to the same Sales Order the system performed correctly unlike in the first case.
thanks
Shahid

Hi,
Please go through the link below, hope this help
http://www.sap-img.com/sap-sd/credit-management.htm

Similar Messages

Sum() function not working properly. Instead of summing, its showing total count of the rows

We have migrated one application from .net framework 1.0 to .net framework 2 (from Visual studio 2003 to Visual STUDIO 2005). Now after migration we are facing some problem related to the sum function in Crystal report 10. It is not working properly.
So we migrated to Crystal report XI release 2 (though still using evaluation version for testing purpose), the problem is not yet resolved.
The problem we are facing is while using the summary in the group field, it is showing the number of rows instead of the sum of the values.
We have checked the same with min-max functions, and it is working properly with those.
We have tried to make the sum by formula field. In such case, it is not showing any syntactical error but at execution time, it is throwing an error saying "A number field or currency amount field is required here".
In the the report the datatype of the field on which we are applying the sum function, is number, and in the table from where the data is fetched, the datatype is numeric(9,6).
Any idea why sum function is not working ?
I was browsing the net and saw running totals can be a work around for such summation issues in Crystal Report XI.
Can you please provide insight of how to implement running totals for summation purpose in solving such issues.

Hi,
Running totals are more accurate than Summary Totals in Crystal. Why? ...ask Crystal. Anyway, just right click on Running Totals, create a new one, and enter you fields, etc. For group totals, it gives you a place to reset the totals for each group, etc. Pretty self explainatory.
Jim

JDeveloper 11.1.1.0.2: "Go to Declaration" function not working properly

Hi all,
We have updated to the new release of JDeveloper and converted our project to this new version.
But now the function "Go to Declaration" (also available using ctrl key + click on the class) does not work properly.
Although we have the source included in the library some classes are opened ok but some in the same package are not.
This problem has occurred on two different installations.
Have someone any idea where could be a problem?
Thanks
Steven

It does nothing. And the source for classes where it works are in same JAR as the source for classes where it doesn´t work.
Example:
we have our class:
public abstract class FormularController extends org.springframework.web.servlet.mvc.SimpleFormController {
when I click on SimpleFormController (with ctrl key) it works ok, it opens SimpleFormController:
public class SimpleFormController extends org.springframework.web.servlet.mvc.AbstractFormController {
but now when I click on AbstractFormController (with ctrl key) it does nothing.
In previous version of JDeveloper it works fine.
And when I create a brand new application in new JDeveloper it works also ok.

Sum function not working properly in Crystal XI. Its showing total count of the values

We have migrated one application from .net framework 1.0 to .net framework 2 (from Visual studio 2003 to Visual STUDIO 2005). Now after migration we are facing some problem related to the sum function in Crystal report 10. It is not working properly.
So we migrated to Crystal report XI release 2 (though still using evaluation version for testing purpose), the problem is not yet resolved.
The problem we are facing is while using the summary in the group field, it is showing the number of rows instead of the sum of the values.
We have checked the same with min-max functions, and it is working properly with those.
We have tried to make the sum by formula field. In such case, it is not showing any syntactical error but at execution time, it is throwing an error saying "A number field or currency amount field is required here".
In the the report the datatype of the field on which we are applying the sum function, is number, and in the table from where the data is fetched, the datatype is numeric(9,6).
Any idea why sum function is not working ?
I was browsing the net and saw running totals can be a work around for such summation issues in Crystal Report XI.
Can you please provide insight of how to implement running totals for summation purpose in solving such issues.

Are you seeing this happen in the Crystal designer as well, outside of any .NET application?

IOS4 bluetooth functions not working properly?

Hello there,
I have the iPhone 3Gs and it is updated with the iOS 4.0.1. The problem I'm having is that, not all of the bluetooth functions are working properly as it used to before, and I wanted to know if there was away of letting Apple know about it so that it could be fixed. I believe it's just a software issue, where there is a delay in conncetivity from phone to headset, but I'm not sure. I own the new, "Jawbone Icon" and it used to work fine before I've updated to the new iOS 4.0. I've tried doing a total rest with both iphone and bluetooth and both methods were unsuccessful. I've actually tested my bluetooth headset with another iPhone, that still had the previous iOS 3.1.3 software, and it worked exactly how it should compared to my updated iOS 4.0.1 iPhone.
The main problem I have is that for one, I no longer hear my phone's message tone in my headset when I recieve a text message, push notification, or even email to my iPhone. Before, with the iOS 3.1.3 software, I would alway here my message tone when I recieve any of those notifications. Which was convinient when I had my phone in my pocket and was in an area where I couldn't hear my phone when I recieved a message.
The other problem I have is that, while my phone is ringing, I would hear my ringtone through my bluetooth while the caller id function was being read to me. This was a little distracting at first, but not too much of a problem. The problem is, when my phone rings and my "Jawbone" reads back to me the caller's number - when I pressed the sleep/wake button to slients my phone, it would also cancel the caller id function that my bluetooth offers. This was a little inconvinient, especially while I was driving. In the state the I live in, while driving, the driver is not allowed to talk on their phone unless it is connected to a bluetooth device. Which is the reason why it would be the reason why i enjoy the caller id function provided by "Jawbone".
If there is anyone that could help me with this problem, or possible help me find a way to send this to Apple, I would greatly appreciate it. If anything, I believe that the new iPhone iOS 4.01 software has a slight delay on their bluetooth connectivity from phone to headset. But, nevertheless, any help or ideas would be greatly appreciated!
Thanks!
Yung Vibe

Yung,
Consider rolling back the OS if you can. Apple support should be able to help.
The bluetooth functionality in IOS 4 is definitely different and not for the better. I'm having serious sound quality and connectivity issues with both the Jawbone II and the Blue Ant Q1. I've called both support groups and bottom line is that IOS 4 has changed and the vendors haven't caught up or the OS has issues that the vendors cant compensate for. I've had to abandon the headsets and move to the delivered earphones. Even that approach has issues if you dont turn off the blue tooth IOS 4 will continue to connect to the bluetooth headset mid conversation. That's a new issue as well. Previous OS made the corded headset the priority and never let the bluetooth take over if the cord was plugged in. I hope Apple is working on this it's darn frustrating and I have an Iphone 4 therefore I cant roll back the OS to 3.

IPod touch 32 g 4th gen video function not working properly

So I am having 2 major problems with my iPod. 1, is that it won't let me add videos of any format tO my iPod other than .mov files and frankly since I have over 100 different videos on m iPod it would be kinda annoying to have to convert each one one at a time. This hadn't started happening till the last iPod software update whicy happened around last weekend. My 2nd problem is that my videos are not orginizing properly. For example under my TV shows section I have a show that should only have 26 episodes in it. Instead it has around 80 episodes in it which consist of other tv shows I have added but my iPod does not recognize that they do not belong there. I keep my videos very organized by episode, show, season, etc and I don't know what to do. I've tried restoring my iPod and that didn't work.
My computer specs go as follows: thinkpad laptop, windows 7, latest iTunes and iPod touch software

The 'wrong sorted TV episodes' bug was the first thing I noticed on 4.2.1's video player. I'd say the whole media part is buggy as never before, at least for me. I absolutely agree with you and in addition to this (as I mentioned here http://discussions.apple.com/thread.jspa?messageID=12686533#12686533) the swipe to delete function on both podcasts and videos seems to be broken, not deleting properly.
I'm also using Windows 7 (64-bit) for syncing, if anything could be related to Windows iTunes or Windows 7.

Filter Function Not Working Properly on iOS App

Spotify Community, The latest version of the desktop app features a filter (Crtl + f) function that allows a user to filter certain tracks from the playlist and "bring them to the forefront." For example, if I filter my largest playlist (which is 3,000+ songs) for "Nirvana," Spotify presents the 68 Nirvana tracks I have in the playlist. If I play this playlist while it is featured, it will only play the 68 Nirvana tracks that I have filterd; regardless of being on shuffle or not, the playlist will not play any songs that are not based on the filter criteria. I believe the functionality that I just described above is excellent and how the software is intended on working. However, in the Spotify mobile app for iOS, the filter functionality does not work like this. Using the filter function in a playlist will filter the presented songs based on the user's inputed criteria/query, however, the playlist that is being filtered will not restrict it's playback to the criteria that the user has inputted. For example, if I searched "Nirvana" on the same playlist above on my iPhone, the same 68 Nirvana songs that I have on that playlist would be presented to me. However, if I selected "Love Buzz" (one of the tracks), then placed the playlist on shuffle, then skipped to the next track, the playlist would then play one of the other 3,000+ tracks from the playlist; it would not restrict playback based on my inputted criteria/querry. In summary, the filter function on the mobile app does not work propely in accordance to the way it works on the desktop app. I think most users who have large libraries would like the filter app to work similar to the way I described above. What can we do to get the correct filter functionality implemented on the iOS app?

Not sure if this is the way to update my question however I have found an app - "I clear my clipboard" that has cleared the entry so I can copy and paste properly again.

Disk utility functions not working properly

Most functions on my disk utility are not working FOr example the burn button is dimmed and out of function I tried erasin the com.apple.diskutility.plst but nothing happen
Message was edited by: DDGT

DDGT:
Let me just post some general directions and see if you recognize them as the way you did them:
1. Repair Disk Permissions
While booted from your internal HDD
Go to (Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left column and First Aid in main column.
Click Repair Disk Permissions at bottom left.
2. Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
+A problem with the restore function also accured ( i tried to restore my Macintosh HD to an external if anything wrong happens Un fortunatly the Hd has something wrong and DU cant fix it properly+
First tell me about the HDD to which you are trying to install.
• Is it a firewire, firewire/USB, or USB HDD?
• Does the HDD have anything on it currently?
• Was the HDD formatted Mac OS Extended before you attempted installation?
• What method did you use in trying to backup the internal HDD to the external? e.g. what software did you use? Were you using Disk Utility or another backup software?
You responses will help me give you specific directions in terms of how to go about accomplishing what you wish to do.
Please post back with information on the points noted above.
Cheers
cornelius

Save AS Function Not working properly

Hi,
I have a weird problem in Adobe Acrobat 7.1. under Windows 7 (64 bit version).
When i open a document i often want to Save it with the SAVE AS function as a different name. To simplify the explenation , this is what i do :
1) Open pdf (either from local drive or internet)
2) Click SAVE AS
3) Browse to the location where you want to save the file.
3) Then i click an existing Filename and change e.g. the last digit. e.g. if TEST.pdf exists i click it, edit it and change it to TEXT2.pdf.
Now i always get the answer : Do you want to overwrite TEST.pdf. It never shows TEST2.pdf.
I tried this for locally stored pdf, internet downloaded pdf's.... It always wants to overwrite the original file.
ANYBODY any clue what this problem could be and how to solve it ?
Greetings,

Hi,
Yes, typing a new name works. But, not selecting first an old name and then
retyping to a new name. That will not work.
Greetings,

Ago function not working properly with time dimension

Hi all,
In OBIEE 11g we have the following issue:
We have a fact which contains transaction's sum for the last day of each month.
We use ago function like this : ago(<fact.column>,1)When we want to see the result from the time hierarchy the fact with the ago function works properly for quarters and half years but for the months shorter than the previous one can't take the right value /equals to NULL/.
For example :
sum for YEAR: 10000
sum for Half Year 1 : 4000
sum for Half Year 2 : 6000
sum for Quarter 1: 1000
sum for Quarter 2: 3000
sum for Quarter 3: 2000
sum for Quarter 4: 4000
sum for month... - here the ago function is confused with the last day of previous month if it's shorter than itself: For example - for march it cannot take value for end of February ..etc.
Any ideas?
Thanks in advance,
Alexander.

Hi,
I faced some issues previously with month, so I used month+year as id instead of month id. Instead of tragging month id 1-12 into your hierarchy, create another column into your table like month+year - 201201, 201202 which creates unique month_year_id and drag this column into month level instead of month_id. So the problem might be solved.
Regards,
Anitha.B

Element substitution not working properly during unmarshal

Hi everybody,
I've following situation. I have a project (call it project A) which contains a schema (lets call it the abstract schema). In the abstract schema there is an element which was declared as abstract. Furthermore there is another element (call it container) which shall be able to contain as much "abstract" elements as the user wants to. It obvious that an element could not be abstract, so I've created another project (call it project b) which has a schema (call it concrete schema) whichs imports the abstract schema. In the concrete schema I will have some elements which substitute the abstract element from the abstract schema.
Now I've an xml document whichs root element is the container (from the abstract schema), and it should contain the non-abstract elements from the concrete schema. So far so good, everything will be validated, there are no errors. But unfortunately the unmarshal progress will not return the expected result. Validation during unmarshal progress is ok as I said but after unmarshalling the xml file, there is no concrete element in the returned result.
I don't know what could be wrong. Did somebody already worked with element substituion in that way and is able to help me?
Because its very complicated to describe I've created a minimal testcase (http://www.mailing-list-disaster.com/generic-jobengine.tar.gz) . Just compile both projects and run the using-abstract-engine application.
Thx for suggestions and with best regards
Johannes Homuth

Hi Ram
Thanks for the reply.
No it does not take from any other LOV and there is no existing LOV mapping for this item.
Its in the iExpense>Create expense report>General Information screen> Approver LOV
The APPROVER LOV needs to be mapped with the field "Cost Center" which is not there in the standard functionality.
Regards,
AD

Date Function not working properly

Dear Gurus,
I have a plan app and the pertinent essbase cube, I need to retrieve the no. of days for the curr month/year combination.
On version 11.1.1.3 I used something like : @TODATE("dd-mm-yyyy",@CONCATENATE("01-01-",@NAME(@ALIAS(@CURRMBR("year"))))) / 86400;
and it worked fine.
When I moved the formula on the 11.1.2 version I get an error " invalid argument in function @_TODATE".
I know that essbase was never really good with dates.
Any help I appreciate.
yannis

Hi Yannis,
1. I see no reason for it not to work on 11.1.2, when it had run flawlessly on 11.1.1.3.
2. Looking at the tech reference of @TODATE, nothing seems to have changed , there is only one difference.which is the latest data supported by the function in 11.1.2 is 12-31-2037,while its 01-01-2038 in version 11.1.1.3.
3. Sounds silly, but try to validate the formula which was resulting in errors in 11.1.2 , on 11.1.1.3 once.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Edit/update function not working properly on visual basic 2012

help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End Sub

Hello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

EJB 3.0: EJBQL aggregate functions not working properly

Hi!
We are experiencing problems when using aggregate functions within EJBQL queries. In my case, we have to use max() function to retrieve the max start_date from a specific table. In order to do this, we wrote the following code:
String strQuery = "select max(o.dt_fim) from Questionario o";
Query queryTeste = em.createQuery(strQuery);
List x = queryTeste.getResultList();
OBS: dt_fim is an Oracle 10g datetime column, with its corresponding entity attribute in Questionario entity class.
AFAIK, the query above should return only one record (object instance) containing the date value, right? However, it brougth a list of the entity objects, corresponding to all records in the table, as we had just run "select o from Questionario o".
Examining the server log we can see this behavior:
[TopLink Fine]:2006.09.12 01:47:55.526--
ServerSession(7119662)--Connection(7048401)--Thread(Thread[ApplicationServerThread-0,5,RequestThreadGroup])
--SELECT ID_QUEST, DT_INICIO, DT_FIM, DS_QUEST, DT_CRIACAO, TP_QUEST, NM_QUEST, COD_SEGMENTO, ID_GRUPO FROM TBBOP_QUEST
Are anyone experiencing this issue?
Is there any workaround?
Any help would be much appreciated, since we need to deploy the application for user testing asap.
Thanks in advance.
Best regards,
Gustavo
PS: We are using JDeveloper 10.1.3.0.4(SU4)
Message was edited by:
Gustavo Lopes Sobral

The 10.1.3.0 versions of JDeveloper contain our early preview of EJB 3.0 JPA functionality. One limitation is that the query language is not complete (released before the spec was finalized).
You can use TopLink Essentials (JPA Reference implementation) whihc contains a complete compliant implementation of the final specification.
http://otn.oracle.com/jpa
The 10.1.3.1 JDeveloper preview ships with TopLink Essentials.
Doug

XSLT document() function not working properly

I have this XSLT:
<xsl:copy-of select="document($file1)/employee/address/*"/>
I have this java which is setting the parameter for $file1
transformer.setParameter("file1",file.getAbsolutePath());I printed out the value of $file1 in the XSLT style sheet using:
<xsl:message><xsl:value-of select="$file1"/></xsl:message>
The Path it prints out is the correct path, let say its c:\myfile\file1.xml
When it reaches the doument($file1) function, it seems that the path is getting changed.
To give you an example, if $file1 = "c:\myfile\file1.xml" and my XSLT file is located at c:\xsl\myXSl.xsl then the path that document() gets is:
c:\C:\xsl\myfile\file1.xml
This causes the following error to occur:
(The filename, directory name, or volume label syntax is incorrect)
Why is document() inserting the path where the XSL file which it is in into the path of the file I'm trying to open? I am using the Xalan API to transform this XML.
Have anyone seen anything like this before?
Thanks
Al

When I looked up some Internet pages that described the document() function, they all said it required a URI as its parameter. A Windows file path is not a URI. However it's possible to get a URI from a File object, so you might want to try that.

Credit Management functionality not working properly during Delivery Execut

Similar Messages

Maybe you are looking for