Credit Management. ReBlock a Sales order.

Hello,
A Sales order has been blocked automatically because the customer does not have credit. The user has unblocked the sales order accidentally (as a result: Sales Order->Header->Credit status: Released). How can I block it again?
Thanks in advance,
Ricard.

Hi
Go to VA02 change the order quantity means increase the quantity and save.
If you want to block for same quantity the again go to VA02 and make the order quantity as earlier.
another way :
If you want to block in same order then in the sales order business data block manually for delivery or billing.

Similar Messages

Credit management module at Sales order creation

Hello Folks,
Can I confirm that when a sales order is created and customer master data code entered, eg , Payer or sold-to party or ship-to party, SD will integrate with Credit management module and do a credit check even before sales order is saved?
Likewise, at order creation stage, SD can also integrate with Project system for milestone billing?
With MM, SD checks the availabilty of material at order creation.
SAP SD integrates with CO only at PGI (via table 30 of MM ) and billing stage.
regards
Tom

The Credit Management check only for the payer's credit. The Credit Check can be configured to check even before the sales order is saved.
Goto T.Code OVA8 or SPRO>Sales & Dist>Basic Functions>Credit Management/Risk Management>credit management>Define Automatic Credit Control
Here you can configure. Check the field Item Check on the top left hand side.

Credit management for Old sales orders

Hi experts,
pls consider the follwing example where i am facing some problem.
I activated the Credit lock system in Sales order level (Warning message with release strategy)and in PGI. (Warning message with release strategy).
Customer A
C.limit : 10000
Outstanding : 7000
Sales value(Without pending sales order value): 2000
Eli gable new sales order value 1000
Pending sales order value 5000(Sales order no 111)
Now if i process this old SO no 111 in VL01N i am getting error that Order blocked due to credit limit. But i activated dynamic credit control only in sales order and in PGI.Not activated in VL01N level.
Awaiting for your valuable reply.
Thanks
SR

Hi
1.KIndly check in the sales order that you have maintain the payment guarentee procedure because of this the system is not allowing to do the delivery
PATH: VA02sales order no-Go toItembilling document---payment guarentee procedure
so kindly check that and remove or assign the financial document to that for processing the billing
2.Check the credit lock procedure is release or not
By doing above the issue will be resolved,kindly check and confirm.
if you have any further clarifications let me know
REgards
Damu
KIndly check the belwo

Credit Management for different Sales Order Types

Hello All,
The problem is related to Credit Management for Sales Order which is explained below with an example -
We have separate Sales Order Types for New Launches (ZNLS) & Normal Depot Sales (ZDPS) but both the Order Types are assigned with same pricing procedure and respective orders will be raised against the same party code.Now automatic credit check is only active for order type ZDPS where the credit limit had been set to Rs.1000. Now Rs,.500 had already been raised using order type ZDPS, then another sales order of Rs. 500 is raised using order type ZNLS.But when a sale order of Rs. 550 is raised using order type ZDPS the sales order is getting blocked, because the system had taken into consideration & added up the Rs. 500 value of ZNLS with previous value of Rs. 500 against order type ZDPS as a result of automatic credit check though it is not active for order type ZNLS.Point to be noted that Credit exposure is also not active for Order Type ZNLS.
How is this taken into consideration & what are the steps need to be configured so that the credit limit check will not get automatically activated for order type ZNLS and only remain active for order type ZDPS despite they are assigned to same pricing procedure and used for invoicing same party code?
Please suggest.
Thanks & Regards
Priyanka Mitra

Hi Mitra,
The issue occurs because of the fact that credit check and the
update of the credit values are separate processes which are also
controlled separately by the respective customizing:
1. credit check is controlled by transactions OVAK and OVA8.
According to the attachment, you have already refered to note 18613 to
check the customizing settings.
2. update of the credit values is controlled by VOV7 or OVA7: "credit
acttive" flag. The 'Credit active' setting only affects the credit
update of the SD credit values (open orders, open delivery and open
billing documents). This flag has no control on the credit check. So
if for an order type, there is no credit check in OVAK and OVA8 but
the "credit active" flag is set for the item category, the order will
update the credit values even if no credit check is performed for the
order.
If the flag "credit active" is not set, the system will not update the
open credit values. On the other hand, the system ALWAYS updates the FI
credit value 'Open receivable' when the billing document is transferred
to Accounting. So, although you deactivated the "Credit active" flag in
in OVA7 or VOV7, such an item will increase the 'Open receivables' and
thus the credit limit used when the corresponding billing document is
posted to Accounting.
If you would like the value from sales order type ZNLS is excluded from credit update, you could consider set the "Credit Active" field as blank in VOV7 for the item category used for ZNLS.
Best regards,
Smile

Credit management –impact in sales order if the order quantity is above customer credit limit..

Hi Team,
Can anyone help us to solve the issue in credit control process..our requirement is stock reservation should happen in sales order even if the sales order value is above the limit in customer master..
Please share the configuration ..
We tried many things but not working properly..
Thanks,

Hi Shiv,
thanks for the help
in this note , the point number 9 mentions that the result of rescheduling and manual stock reservation will be different if there is credit check in sales order.
is there any way to solve it? it is because our product list is so high..i run V_V2 for 1000 items for 800 items reservation happened propelry and for 200 V_V2 didnt confirm for some orders for the same do we need to run manual ATP??
Thanks to help us

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

Repeat credit checking for released sales orders

Hi,
We are implementing FSCM Credit management in our project. In our system, when the sales order is created, the credit check will happen and the failed orders will go to VKM1. Till the order is released, any change to that order will trigger the credit checking process.
But once the credit block is released in VKM1, Credit checking is triggering only for
Quantity change
Adding new line items
Credit checking is not triggering for any other changes to the SO like deleting the line item changing the payment terms etc..
I would like to know if there is any control in FSCM Credit management to repeat the credit checking process for the released sales orders.
Appreciate any help in this regard.
Thanks
Prabhakar

Hi Prabhakar,
Navigate to Financial Supply Chain Management--> Credit Management--> Integration with sales and distribution-->define automatic credit control.
Over there you need to check critical fields check box for this to happen. Hope this helps

Credit block in a sales order

Hi All,
Is it possible to find out who has released a credit block in a sales order. Is there any table or T-CODE .
Normally , it is displayed in the Change log of the sales order . But in our case the change log is not showing any details of the credit block . Can there be any reason why it is not showed in the Change log .
Please help .
Regards,
Pallavi

Hi
Please try this:
Pass VBELN to CDHDR table as OBJECTID along with OBJECTCLAS = VERKBELEG To Fetch CHANGENR (Document number)
Pass CHANGENR, and VBAK-VBELN, OBJECTCLAS =VERKBELEG, TABNAME=VBAK and FNAME=FAKSK into CDPOS table to
Fetch CHANGENR
Pass the CDPOS-CHANGENR as CHANGENR and OBJECTCLAS = VERKBELEG into CDHDR table again to get change details.
P.S. If sales order was blocked and unblocked by some one, it should display in Change log of sales order.

Where is credit control Area in sales order.The field.??

Hi all
where is credit control Area in sales order.The field.??
Ahmed

Hi Sadhu,
You may get the wrong infomation if you only checking the credit control area for customer master.
During sales order creation the system determines the relevant CCA. This is done in 4 steps in the following sequence:
1.      Userexit
2.      Credit control area of the payer (XD03)
3.      Credit control area of the Sales Area (OVFL)
4.      Credit control area of the Company Code (OB38)
As far as the system can determine a CCA it leaves the sequence.
So there maybe no credit control area in customer master data for the payer. But if there is one maintained for sales area or company code or in userexit, the sales order can get one CCA determined. I recommand using the check_cm report because it tells you the correct info.
Regards,
Smile

How to place a credit block on a Sales order

Hi All,
I am creating a scenario for testing in which I have to place a credit block on a Sales order. How do I do that. Please help.
Regards,
Shanu

>
Shanu Jain wrote:
> Hi Ravi,
>
> Thank you for the response. If I want to get the error of credit block while creating the Sales order itself (when I am trying to save the Sales order) what settings we need to do besides making the credit limit zero for that customer in FD32?
>
> Regards,
> Shanu.
Hi Shanu,
Just do simple debugging and change the field value , it will automatically solve your purpose , with this there is no need to change the configuration etc.
pls put the break point at ..
1) Goto tcode se38. Here input SAPLVKMP and then press display.
2) here you can see lot of includes , here pls double click on the include LVKMPF0A.
3) Here you will see the code like..
open values > creditlimit
IF SCC_SUM_OPENS GT SAV_KNKK_KLIMK.     :> place the break point here
    PERFORM MESSAGE_EXCEEDED_VALUE USING SCC_FLG_ORDER SCC_SUM_OPENS.
    MOVE CON_RC_NOK TO SCC_RC.
ENDIF.
4) And now do the sales order , the cursor reaches here , then in the debugging mode change the value of SCC_SUM_OPENS to more than SAV_KNKK_KLIMK.
5) And then press f8 , now you will get the desired result , ie your order will have a credit block.
Hope this will help you.
Regards,
Vvieks

Item credit price changed in Sales order - credit management.

Dear Friends,
In Sale order item change log shows ' item credit price changed' . Item credit price comes from 'Total ' value line in pricing which is the sum or prices and taxes. But where as none of prices and taxes that contribute to this total have been changed, the change long shows item credit price as changed from a value to other .
This sale order has many items and for most items same is the case. For some items it looks like quanity got confirmed eventually through back order or availability check from VA02. The change log for the document also shows 'credit released value' also as changed.
User wants to know how item credit price which is nothing but total value line is shown as changed when none of the prices and taxes have been changed
Could someone throw light on this?
Regards
Mahesh.

Hi Murali ,
First, Thanks for the reply .
In this issue what happened is, after couple of items added, the sales order was released for credit check. Later changes have been made to this credit released document either by way of adding new items or by confirming the availability check for some items . Because of this change log is showing ' realeased credit vlaue' as changed from certain vlaue to the other . How this could have affected change in item credit price which is coming form toal value line which is nothing but netvalue ( price -disccount+ taxes assingend with subtoal 'A' ) ?
What exactly is the concept of released credit value and its relation to item credit price ?
As per releasing the document that is not a problem but user's request is he wants to know why this is happening .
Please help me in understanding this better.
regards
Mahesh

Credit limit Block for Sales Order.

Hi.
when customer will create Sales order, it should get blocked for Credit check.
& customer will realese it with VKM3 transaction for particular document type .
Where will i do the setting?
is it Delivery Block 01-Creit Limit check?
Reg,
Amol

Hi Amol,
You can gonfigure it from SD > Basic functions > credit management/risk management settings > credit management > define credit group and assign sales doc and delivery doc. addtionally, you need to maintain automatic credit control configuration and maintain it to customer specific from FD32 regarding of its credit control area.
Regards,

Automatic credit release of blocked Sales orders with pre payment

Hi ,
We have a requirement as given below.Please suggest a better solution for this.
The customers have the 'prepayment ' payment terms with different percentages of the sales order
value to be paid before the delivery creation.
When the sales orders are created, they are blocked for delivery by some credit block.
The business use VKM1 transaction to view these blocked orders and release them manually for
delivery creation after checking if the customer has made the prepayment.This is a tedious work
(since there are too many sales orders )for the credit manager who dont have the complete
visibility of how much prepayment the customer has made and need to manually check if the
payment made covers the sales order prepayment amount to be paid.
1. How can we do a automatic release of these blocked sales orders?
2. Is there any program(which can be setup as batch job) to do a credit recheck and release the order
automatically?
3. Will Milestone billing plan functionality satisfy this requirement?If so how?
We are using SAP version 4.7 without Project System.
Thanks in advance.
Regards,
Ragesh

Hello,
This is not possible because when you created the sales order it has checked the credit limit for that credit limit and if you increase also now that block cant go automatically.
Go to VA02 i.e change mode of sales order and change something and enter may be if you created a order for 2 quantity then go to VA02 and remove the quantity 2 and again type 2 then system will again check for credit and now that is increased so the order will not block..
If this is for many order then you can run changes sales order BAPI for mass update. Take help from ABAP guys.
Cheers
Say

CO-PA, is credit management suppose to block orders from posting to CO-PA?

We are currently using CO-PA to track the $ amount of sales orders that were booked for a particular date range, and it will show the sales order created or changed and the $ amount that was added or taken away from the bookings for that day. This report is to show management how much sales has been recorded for the day, but not necessarily shipped out yet.
What we are currently facing is problems with credit management blocking the order from posting into the CO-PA tables. When the order is created and the order desk hits save it first goes through credit management, and if it is put onto the blocked order lists to be released it does not post the value that was created for that day into CO-PA. Also when we run our rescheduling report for orders that have already been created the order can again go back and forth on and off credit hold, and each time it posts an entry into CO-PA.
I was wondering if anyone has been requested to have a report written to record bookings of sales for a particular day, and have you run into the issue of the credit management posting over and over onto the report and how do you get around this.
We just want to see if any new orders have been created for that day, if current orders have been added on to or taken off from, and have a report to show the order #, dollar value and quantities.
Thank you,
Karen Kim

Dear Karen,
You cannot see blocked SD documents for credit check in CO-PA. Values are transfered to CO-PA after the sales order is processed or after the billing document is posted. So if the sales order is not
processed because it is blocked for credit check, naturally it will not be transfered to COPA. The logic to exempt orders on credit hold was implemented in release 40A.
To overcome your problem you may implement the modification described in the note 214059. Please be aware that this is a modification note. Please implement in a development environment first and retest.
regards
Waman

Credit Blocked 3rd Party Sales Order confirm quantity change discrepancy

Hi,
I am facing the below 3rd party SO qty change issue. Please check and advise me.
Step 1:
Created one 3rd Party SO for item A - 10 qty.
Step 2:
PO is created with reference of PR number (item A- 10 qty).
Setp 3:
            Again I am changing the SO item A qty from 10 to 20 (i.e. SO value is increased).
            Due Sales order value increase the credit check performed and due to customer credit
            limit the system shown Static Credit Block message (SO blocked for Credit approval).
Setp 4:
I have saved the SO with the Credit Block message (still SO Credit Blocked).
Issue :
I have not released the Credit block in SO, Even the system has updated the SO confirmation qty as 20
and subsequent PR and PO also changed from 10 to 20 qty.
Regards
Baskar

See, the Credit Management System is designed to work in the SD side & not on the MM side.
Once PR is created, it is updated every time Tird party Sales Order changed which is basic requirement.
Once PR is created / updated, system (Credit Management) cannot the creation of PO & subsequent documents. This is becaus Credit Management is desinged to block creation of Sales Order, Delivery Document & PGI & nothing more.
That is why I suggested you to go to Z-Development & apply a User Exit.
Hope this clarifies.
Thanks,
Jignesh Mehta

Credit Management. ReBlock a Sales order.

Similar Messages

Maybe you are looking for