Credit memo and return

Hi gurus,
after I have created a credit memo , I want to create a return for the same material item. but message shows that " there is already a credit memo request", so I can't continue to create return. can I create credit memo request and return at the same time?
thanks very much

Hi
With reference to invoice you need to create return sales document. based on return sales document u need to create return delivery document.
Process
Step1; create return sales document
Tcode; Va01
Document type RE or ZRE (With out Reference)
Step2: create retrurn delivery document,
Tcode; VL01n
Enter return sales document. save it
Step3: create post goods reciept
Vl02N
Click on PGR.
Step4:
T.Code:VF01
Enter return order no
Step5:
T.Code:VF02
Enter the Return invoice no and select the release to Accounting.
save.
Withregards
(M.Venu)

Similar Messages

Separate Credit memos and Returns in cube 0sd_c03

Hello Dear All.
I'm using a copy of cube 0sd_c03, and i want to know how to separete credit memos from returns in this cube.
Can anybody help me ??
Thanks in advance.

Hi
In the cube if you have document type.......chose the document type RE or to see the returns and documenty type of credit memo will be CR or ZCR or soemthing related to that
If you are building queries on the cube.....you can use filter or restrictions accordigly in your queries
Assign points if useful
Regards
N Ganesh

AP Credit Memo and Good return, creates differences between TB and Stock Audit Report

Hello Experts,
Did any one has ever faced an issue, whereby AP Credit Memo and Good Return creates discrepancy between journal entry and the stock audit report?
Here is the scenario:
AP Credit Memo
Description
Quantity
Unit Price
Total
Item A
                30
            3,400
   102,000
Journal Entry :
Debit
Business Partner
     105,000
        Credit
                      Stock
     105,000
Inventory Audit Report
Description
Quantity
Cost
Transaction Amount
Item A
                        30
                     3,500
                                                105,000
Journal Entry :
Debit
Business Partner
     105,000
        Credit
                      Stock
        105,000
The difference is actually due to the moving average, but the strange part is why the difference is not posted in the journal entry, in the Price different account?
This makes the stock account amount to be different from the Trial Balance and the Stock Audit Report.
And this is applied also on the Good Return transaction.
Any help is highly appreciated.
Best Regards
Cedric Kayitare

Hi Cedric,
Price & Item cost are different.
while making goods return , Direct AP Credit Note, Sales Delivery, Direct AR Invoice, stock is going outside.
In these transactions Journal entry will happen for Item cost and not Item sales or Purchase price.
Please enable item cost field in line level and check whether above formulae is matching with Item, cost field.
Then what is the importance of price in these documents??
Price is the agreed selling or purchase price for trading with Customer and supplier.
In your example
You are returning back material worth 105000(as per moving average price), but supplier is supposed to give only you 102,000.
Hope you understand
Thanks
Unnikrishnan

Credit Memo and A/R Invoice linking

Hi
Please help me, how to find relation field between Credit Memo and A/R Invoice.
I delete invoice using credit memo with copy from function.
But when I view last credit memo, i cant find the corelation with my deleted A/R invoice number.
I found remarks, but i think remarks is not the link for document.
I really confuse about this. can anyone help me?
ps: i cant found the relation return and A/R invoice too..
Thanks so muchh

Just thought of another trick or two that you might try...
1. Open ANY Credit Memo and use the "Find" Icon (the binoculars in the Icon Line) or use "Ctrl+F" to put the credit memo window in find mode. Put an asterisk in the field where the credit memo number usually is and hit enter...
It should pop up a list of all credit memos with Remarks - look to see if your credit memo is there. Or you can sort the whole screen by double clicking on the "Due Date" column of the display.
You can view an individual credit memo by highlighting the line (making it yellow) and pressing Enter Key to check that out also...
2. If that does not work for you, you can always use the SQL route where the OINV.DocEntry = RIN1.DocEntry and get a list that way where you can look through it.
OINV = Invoice Headers and RIN1 = Credit Memo Lines
Good Luck - Zal

Credit memo for returns with multiple reference deliveries

Hi Experts,
I have few credit memos for returns with multilple return orders and return deliveries in document flow.
I want to find out where do we configure this setting in which there will be single credit memo for multiple deliveries.
And how system decides the common factors in deliveries for this credit memo?
Please guide.
-Chetan Barokar.

Hi,
In copy control settings of delivery document to billing document you can maintained the requirement routine Data VBRK/VBRP as 03 - Single invoice for an item category, as theinvoice spliting will be control from copy control.
with regards
Vivek.

Issue related to the Credit memo and S.O.

Hi,
I have one issue related to the Credit memo and S.O.
We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
I mean can we create Cr memo wrt S.O when the partner functions are different?
Pl. guide me.
Thanks,
Roopan.

You have an interesting Scenario.
You can handle this scenario in multiple ways
1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
2. Order related sales & credit memo.
3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
Regards,
Rajesh Banka
Reward points if helpful.

Regarding credit memo and debit memo

Hi Friends
In how many ways we can create credit memo and debit memo?
plz reply
thanks in advance

Hi Venkata,
Credit memo is billing document type.
You can create it with the refrence of
Credit memo request,
Order
Invoice
Refused delivery return
Regards,
MT

Credit memo and debit memo

Can some one kindly explain the img config step by step and how to check this setting in easy access.
Thankyou in advance
Rewards are assured
Best regards,
R.Srinivasan

REFER BELOW REWARD IF HELPS
Debit note and Credit note? What is the purpose? How we create?
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.

Credit memo and subsequent GL account

Dear All,
I would like to clarify 3 point below.
when i do credit memo on full quantity, the double entry is hitting vendor and GRC account.
when i do credit memo on part quantity, the double entry hitting vendor GRC and stock account also.
when i do subsequent debit or credit, double entry hitting vendor and stock account.
1) May I know why credit memo, full quantity only hit GRC whereas part quantity hit GRC and stock?
2) May i know why subsequent debit/credit hitting stock account only?
3) credit memo must have to create return PO? without return PO can?
Thanks

Hi
credit memos and subsequent credits can be used to adjust the amount due to the vendor.
we usually receive a credit memo from a vendor if you where overcharged.
as in case of invoice .creit memo refer to purchase orders or good receipt
when you post credit memo,the total invoice quantity in the po history is reduced by the credit memo quantity.the maximum quantity you can make a credit for is the quanitty that has alredy ben invoiced.
During Credit Memo, It is making same accounting entires as it makes during Invoice posting
Regards
kailas ugale

Diff bet credit memo and credit memo request

Hi
Can any one tell the difference between Credit Memo and Credit Memo Request
Thanks in advance

Hi,
Below is the information on crdit memo request.
Definition: A credit memo request is a sales document used in complaints processing to request credit for a customer.
Use: If the price calculated for the customer was too high (for example, with the wrong scaled prices or because a discount was forgotten), you can create a credit memo request. The credit memo request can be automatically blocked for checking. Once it has been approved, you can remove the block.The system uses the credit memo request to create a credit memo.
Structure: A credit memo request is another type of sales document like a standard order. For more information on sales documents, see Working with Sales Documents.A credit memo request starts the billing process.
=============================================
Below mentioned is the information on Credit Memo.
Definition: The term credit memo always refers to a credit memo from the vendor. Therefore, posting a credit memo always leads to a debit posting on the vendor account.
Use: As in the case of invoices, credit memos refer to purchase orders or goods receipts. They are used to correct the purchase order history if the quantity invoiced was too high, for example, if an invoice was too high or if part of the quantity was returned.
When you post a credit memo, the total quantity in the purchase order history is reduced by the credit memo quantity.
If you do not want the total quantity invoiced to be reduced, you must post the credit memo as a subsequent credit.
Hope this helps. Please let me know if you need more information and please assign points.
Rgds
Manish

Difference betn credit memo n credit memo for returns

Hi,
What is difference betn credit memo n credit memo for returns?

Hi
CREDIT MEMO:
Suppose, you have chrged (Price) the customer more or you have charged the customer for say 10 pieces but you have send actually 8 pieces,for which customer has paid you.
In both the above scenarios, you need to pay back the excess amount paid by him.
To payback, we create a Billing document called Credit memo. In standard SAP, Billing Type G2 is created for Credit memo.
This Credit memo(G2) is created with reference to a Credit memo request (Sales document type) with Order type "CR".
This Credit memo Request (CR) is created either with reference to Sales order or Billing document.
Ofcourse, it can also be created with out any reference document also. In real time scenario, we normally create this Credit memo Request with reference to the Billing document (Invoice).
No Delivery takes place in this scenario while creating a Credit memo (G2).
CREDIT FOR RETURN
When goods are physically returned back by the customer due to some complaint, then we first, create a Return order(Order Type RE) with reference to either Sales order or Billing document. Normally, in real time scenarios, we refer the Billing document.
Return order can also be created with out any reference .
In situation like, suppose you had sent 10 pieces of certain material to the customer for which he has paid. But he found that 2 pieces are defective or damaged in transit. So he has returned it to you for which you need to create a Return order(RE).
From this Return order(RE) -
> Return Delivery is created -
> PGR.
As customer has returned the goods to you, then there are 2 options with you. Either you may send fresh stock ,which we normally call "Replacement" OR you may pay back the value for the returned goods.
If, we pay back, then we create a Credit memo for return, which called "Credit for Return" and in standard SAP represented by Billing Type (RE).
In standard system, this "Credit for Return(RE)" is ALWAYS created with reference to the "Return Order(RE)".
Even though, physical delivery takes place in return process, still the "Credit for return(RE)" is created with reference to the "Return order(RE)".
If, client requires it to be created from Return delivery then you need to establish necessary settings in customisation which has already beed discussed in this forum several times.
Hope, it is clear.
Regards

Diff: Linkage of Credit memo and Dispute Case in EHP 4 and EHP5

Hi Experts
I am bit confused ...on the Linkage of Credit memo and Dispute Case in EHP 4 and EHP5.
Does the following statement is valid in EHP4 or EHP5.
"You can add a credit to a dispute to close it or reduce the amount disputed."
If it is possible in EHP 5 or EHP 4, please let me know what is the procedure to follow?
If i need to activate anything in SFW5, please provide what is the Business function i need to activate.
Thanks in Advance.
Regards,
Meenkashi.N

Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard

ISA credit memos and down payment does not display data R/3 E-commerce 5.0

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?

Credit Memo and AR Invoice Query

Hi Everyone,
I'm fairly new to query writing and need to write a query that would list all of the credit memos and invoices. I was able to write the following query that pulls just the AR Invoice info. How do I also pull the AR Credit Memo info?
SELECT T0.[CardCode], T0.[DocNum], T0.[DocDate], T1.[Quantity], T1.[ItemCode], T1.[PriceBefDi], T1.[StockPrice] FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry ORDER BY T0.[CardCode], T0.[DocNum]
When using the generator it does not link the tables together in any fashion. I tried to just add the ORIN and RIN1 tables to it (as I can just have them listed below the invoices), but SAP appears to just lock up and I end up closing the application.
I searched the forum as well and found that there is a link between the two and it is:
RIN1.BaseEntry = OINV.DocEntry
and
INV1.TrgetEntry = ORIN.DocEntry
However, when I try to add these joins to the query, it ends up showing a credit memo for every single line, and I know that is not correct. I know there are different types of joins, so perhaps I'm using the wrong join or something?
I appreciate anybody's help.
Thank you,
Amanda

Hi Amanda,
Try this one:
SELECT T0.CardCode, T0.DocNum, T0.DocDate, T1.Quantity, T1.ItemCode, T1.PriceBefDi,
T1.StockPrice FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
UNION ALL
SELECT T0.CardCode, T0.DocNum, T0.DocDate, T1.Quantity, T1.ItemCode, T1.PriceBefDi,
T1.StockPrice FROM ORIN T0 INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry
ORDER BY T0.CardCode, T0.DocNum
Thanks,
Gordon

Credit memo and Subsequent Credit/Debit Scenarios

Hi All,
I have to present all the invoicing scenarios to the client. These also include credit memo and subsequent credit/debit.
Can someone please give me some examples of these. What is the meaning,how to handle,how do these arise.I will have to run these for them on screen.Please can you help me out with these.
Regards,
V S

Hello,
Subsequent Debit and Credits
After an Invoice is successfully posted and the transaction is completed, Vendor approaches with additional amount invoice or correction in Invoice.You would like to post this additional invoice with reference to the original PO and item. Subsequent Debit / Credit functionality allows you to capture this difference without canceling original invoice.
Please check this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a8/b99890452b11d189430000e829fbbd/frameset.htm
Regards,
Shailesh

Credit memo and return

Similar Messages

Maybe you are looking for