Credit Memo Request already exists for item & 1 , & 2, etc

Hi SD guru's,
I am trying to create a credit memo request in reference to my sales order invoice and i am getiing this warning message "Credit Memo Request already exists for item ".
How is this possible,when i am creating the credit memo request only for the 1st time. Message number displayed is V1498, can you please help me solve this issue.
Also when i manage to enter into the credit memo request document by pressing enter to all those warning's, i am asked to enter the target quantity. How do i handle this? since i have maintained order quantity in my sales order and my sales invoice.
Message number displayed is V1498, can you please help me solve this issue.
Waiting for your kind help.
Regards
Ravi.D.Mansharamani

Hi,
You can control the quantity to be copied into Credit memo request through Copy Controls Quantity Update.
The the same quantity will be copied from the reference document into target document.
You are getting error as Credit Memo Request exists , because you have created the Credit Memo request for full Sales Order Qunatity.
Regards
Krishna

Similar Messages

Subsequent documents already exist for item - information message

Hi All,
Once a sales order item is rejected post creation of subsequent document, the information message in quetion appears for every item repeatedly.
I have cases were there are thousands of items (in RRB billing drafts for instance), and the reason for rejection is set via the menu: Edit --> Fast Change Of --> Reason For Rejection. The problem is that the message pops-up for every item separately and the users are obliged to press Enter thousands of times.
Is there any solution for disabling this message under defined circumstances?
Appreciate your assistance.
Amit

Hello,
Once a sales order item is rejected post creation of subsequent document,
the information message in quetion appears for every item repeatedly. I have
cases were there are thousands of items (in RRB billing drafts for instance),
and the reason for rejection is set via the menu: Edit --> Fast Change Of -->
Reason For Rejection. The problem is that the message pops-up for every item
separately and the users are obliged to press Enter thousands of times.
My suggestion would be why not reject the Sales Order at Header Level. The second option will be try out the transaction code "MASS" and for any list of Sales Order, you can easily reject at a single shot !!
Regards,
Sarthak

Creating credit memo request - V1 498 / missing order quantity

Hi Experts,
could any of You pls help me with a credit memo creation issue?
I credit memo needed to be created based on invoice, so configuration and copy control is done as usual, but I have a failure during CR order creation referring to an invoice F2.
I got an error message: V1 498 - Credit already exist for item... - and no qty is transferred to new document
I have gone thought the threads on Forum, but none of the suggested solution was appropriate to solve the issue:
- the document flow is updated in copy control ,
- I can no remove the schedule line flag at VOV7 - the order qty will be missed but target qty is used, and end up incompletition (VU 019 error messge), so billing is faile
- completition control set as B at VOV7,
Still have the problem
Could any of You pls help me - answers will be appreciated.

V1 498 - Credit already exist for item...
What the above message means is that lines items have already been used as reference for the creation of credit memo request(s).
Create a new sales order, delivery and billing document. Then create credit memo request with reference to this new billing document and test.
In VTAF copy control, at item level, field "Pos./neg. quantity" dictates how the quantity in the source document is affected by copy control.
PS - I tried to create credit memo with reference to billing document (F2), there were no issues there. Therefore I am taking that the issue is with credit memo request (copied with ref to billing document F2)

Copy control from Credit Note to Credit Memo Request

Dear gurus,
After I set the copy control parameters in my billing doc, source - credit memo request & Target - Credit memo,
I could not find my condition types to be copied from my credit memo request.
I have infact set the pricing type to D - Copy pricing elements unchanged.
Can you let me know if I had missed anything?
Also, to clarify on this credit concept. Say that we sent 2 pieces of a product worth $100 each & if it happened that the customer returned 1 piece , we can create a credit memo request via VA01 for the part that customer returns & if the pricing condition is $100, we create a condition value $100 back to the customer.
So further create a credit note where this $100 is copied from Credit Memo request order type.
This is the concept of credit correct me if i am wrong
regds,
a

Hi Pri,
Give me your mail ID I can send you some screen shot of the Copy control set from Credit memo request to credit memo.
To clarify on Credit.
In the first instaance we have supplied 2 items to customer and Billed them. Now he has returned one material to account for this returned material you can create a returns order and complete the cycle and then create a credit memo for the returned material.
ELSE
You only want to adjust for billing. Then when we have already billed customer for 2 items and out of which 1 item is returned and hence we have to give him credit memo for 1 item i.e $100 in your case.
The condition value in Credit Memo Request (G2) would be taken from standard conition type PR00 only.
FIRST Create a credit Memo Request (G2) in VA01
CMR is set with a billing block
Go to VA02 and remove the block
Create a Credit memo Using VF01 using Billing Type G2. The system will copy the data from CMR to Credit memo once you set the Copy control in VTFA
REWARD IF IT HELPS
Regards
Srini

How To Create Credit Memo Request In CRM

Hi Friends,
I have to create CMR i.e. Credit Memo Request with Header and Item details but I am not able to do it.
Kindly let me know the BAPI / FM with some example. Also, do let me know which all values are mandatory for the FM or BAPI structures.
I will definitely reward points if the solution will help me in creating the CMR.
Thanks,
Pradeep

Hi Rekha,
I have to create CMR with following details :
Description To be displayed in Header
Status : i.e. Create / Open
Item Detail
Product and quantity
Hope I am clear in this.
Regards,
Pradeep Singh Dhadwal

Credit Memo Request - Status Open

Hello ALl,
I have credit memo created, user want me to delete whole process. So i have canceled the credit memo.
And i have rejected the credit memo request but still my items are still has status of open?? And my over all document is has open status.
And it is the same for the debit memo request??
Can any one tell me how can i delete the whole process??
Thanks
Sundar

Hi Sundar,
I have tried the same scenario.Kindly follow the below steps and confirm.
1. Once you cancel the subsequent documents.
2. Goto the Credit memo request and select the Item data enter the Reason for rejection in Sales A Tab and Save.
3 . Create the billing document and the value will be zero.
Now status will be shown as completed.
Regards,
Shahinsha

Credit memo request release according to values

Hello Gurus,
How can I configure for following function:
If the value of the credit memo request is below a certain minimum limit, then it can be released automatically by the system, and make the definition of the point at which the check is carried out and the employee responsible dependent upon the value of the credit memo request.
thanks very much!

Using the workflow, you can represent the whole business process, with all the people involved, for approving credit memo requests within your company. This enables you to process credit memo requests simply and efficiently.
If you do not use the workflow, the system does not control the process flow.
In your case, you should have a workflow such that if the value of a credit memo request is below a minimum value, the system automatically releases it for billing by removing the billing block.
If the credit memo request exceeds a certain value, the system automatically informs the employee responsible. She or he receives a work item in their inbox and can process it directly from there.
You need to configure the settings in Customizing for the workflow and create an organizational plan for this.(you may use other methods other that org plan. A workflow consultant may give you further details)
you should configure such that when you create credit memo requests, the system normally sets a billing block, which prevents it from being billed.
You create the billing block for credit memo requests in customizing for Sales and Distribution when you define the order type (Sales and Distribution ->Sales ->Sales Documents-> Sales Document Header ->Define sales document types)

Approve credit memo request

Hi,
Is there any standard functions in SD to approve credit memo request in case credit memo request over 1,000usd?
Regards,
Jr.SD

Hi,
For automatic approval of credit memo requests, you need to go for work-flow implementation. That is the job of Work-flow consultants.
By default credit memo requests are blocked for billing.
Up to certain limit, billing block is removed automatically by system.After that limit, authorized persons need to remove the billing block manually.
Regards
Sukumar

Problem while doing invoice for Credit memo request

Hi all
I very well known that Out boud Delivery is not needed for Credit memo request but after saving the CMR and when i raise the Credit Memo (VF01) system is showing a error message saying "PGI not done for Outbound Delivery 30047402"
In CMR document type i have set the order related billing and i have removed the billing block also
I have raised the CMR based on Invoice
Kindly help me in this regard
Regards
BMS

Hi Raj Aryan Malhotra, Thanks for ur reply
The setting which u said are already there
The second one that is, change the copying requirement of header to 11. i did this but this time the message was different "The document is not relevant for billing" . After checking the log i could the follwoing info
Client                                                   240
Group Number
Sales Document Number
Item Number of the SD Document         000000
Schedule Line Number                         0016
Counter in Control Tables                     00
Message Identification                         VF
System Message Number                    016
Output Type                                        I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type                                         F
Kindly help me to resolve this also
Regards
BMS

Update Profit centre for Credit Memo request whose Billing is compeleted

Dear All,
I have an issue for a creditmemo request whose billing is already been completed and consequently the invoice has been cancelled but unfortunately the Credit memo request (CMR) is pending in the incompleteion log for the profit center which need to be entered. The document flow shows blank in the status field for the CMR.
Need your advice how we can update in the sales order (CMR) thou the field is greyed out and not able to change the profit Center field in the change mode by changing any other fields as well.
Is there any transaction where in can we change the field values directly related to Profit Centre (In account assignement tab at Item level of the sales order)
Appreciate your quick reply on this
Regards
Mahesh

Hi
Check this below link. I had faced this issue years ago and got a strange solution which is still applicable.
Open status of Credit Memo after rejecting all line items
Thank$

Multiple credit memo creation for single credit memo request

Hello,
The problem is that I am able to repeatedly create multiple credit memos for the same credit memo request. The system is not stopping me by saying "This order is fully invoiced".
I observed the following in the customizing:
1. If the sales document category of the billing document (in VOFA transaction) is 6 (Intercompany credit memo), then I am able to create mulitiple credit memos against the same credit memo request.
2. When I change the sales document category of the billing document to O (credit memo), then the system stops me from creating multiple credit memos against the same credit memo request.
If I want to maintain 6 (intercompany credit memo) in VOFA and still want the system to stop me from creating multiple credit memos for the same credit memo request, then is there is any other customizing to achieve this?
Thanks,
Shankar

Shankar, most likely the billing status of your sales document is not updated. We have experienced the same (or similar?) issue with the intercompany documents and SAP refused to correct it. Here is a fragment of my message exchange with the SAP support:
We have already read the notes 63459 and 308989. They both do not apply
to our business process. The document flow mentioned in the notes is as
follows:
Sales order - customer billing document - intercompany billing document
Our document flow is different:
Contract - customer billing document - Intercompany sales order (could
be more than one order per customer billing document) - intercompany
billing document
The order-related billing status is not being updated on the
Intercompany sales order.
The process described in the notes implies one-to-one relationship
between the customer and inter-company billing documents and the sale
from a Plant that is assigned to another company. We are in the service
industry and sometimes the sale revenue has to be shared by 2-4
companies within our enterprise.
Good day. It is a standard system behaviour that if the billing document type has SD document cateogry '5' (field TVFK-VBTYP in transaction
VOFA). So it is an intercompany billing.
The order-related billing status VBUP-FKSAA is not affected by the
intercompany billing.
So its billing status remains opened, and can be billed more times.
This doesn't seem right to me. Maybe if more customers complain, they will do something about it.
To some extent this may be managed with copy requirements (VOFM), where you can prevent copying the credit memo line items that have been invoiced. However, this might still lead to the blank documents with 0 value, statuses won't be correct and in VF04 you would see the documents as not invoiced.
I had to do a core modification to resolve this issue in our system. In LV45P011 include I did the following:
* Faktura
*{ REPLACE DC6K903001 1
*\ IF vbfa-vbtyp_n CA vbtyp_fakt AND vbfa-vbtyp_n NA vbtyp_fkiv.
IF vbfa-vbtyp_n CA vbtyp_fakt.
*} REPLACE
Hope this helps.
Edited by: Jelena Perfiljeva on Nov 14, 2008 11:09 PM

Setting up multiple billing blocks for a CMR - Credit Memo Request

I am trying to set a billing block for a credit memo request. The item category in VOV7 configuration only allows you to set one. I need to be able to set any of them and for it to block. If we do not use one; the system allows the credit memo to get created. If we choose the one that we configured in VOV7 it allows us to only use that one. The client needs to be able to select any billing block from the drop down when creating a credit memo request in VA01 instead of just one specific one. Is this possible? If so, where would I do this?

Surprising! when a billing block is applied in the sales document, then the system will NOT allow to create the billing document(in your case credit memo). Can you check in t.code OVV3, the billing blocks are assigned to billing types? After assigning, create a new document and test. The path is SPRO->Sales and distribution -> billing->billing documents ->define blocking reasons for billing->assign blocking reasons to billing types.
Regards,

Error while creating Credit Memo Request for Milestone billing invoice

Hi All,
I have a scenario where i have Milestone billing(% based) at header level in Contracts. I create Invoice for that and then try to create Credit Memo Request with reference to the Invoice.
Problem comes when we try to change the qty in the credit memo request. we are able to change the qty but the value is not changing. It remains the same constant value of that milestone.
In my copy control from Invoice to Credit memo request for the item category i have maintained the pricing type as "C" because i want to copy and manual conditions.
So kindly let me know which config setting should be done so that whenever i change the qty the value should also be changed.
Please Note : This is happening only when my billing plan is at header level. For Billing plan at Item level its working fine.....
Thanks.....

Hiiii.....
Can anyone please advise on the below issue of mine.....
Thanks alot for the help.......in advance

How to create new line item in credit memo request in rebate settlement

HI friends,
I need aimmediate help on following.
Requirenment is for given agreement all invoices for that needs to be retrieved. In those invoices we need to check the tax code or tax city for all invoices. If all are same then do nothing.
But if any of these 2 fields are different in all retrieved invoices, then we need to sum up the qty for all invoices having same tax code/city & like wise ned to create a credit memo request which will have one line item for each tax code/city.
Example:
Agreement 9999 with the relevant sales volume:
Invoice 1: Material A, tax key X, quantity 1 kg
Invoice 2: Material B, tax key X, quantity 2 kg
Invioce 3: Material C, tax key Z, quantity 4 kg
The credit memo request for agreement 9999 should look as such:
Thanks & regards,
Abhijeet.
Item line 1: SETTLEMENT MATERIAL, tax key X, 3 kg
Item line 2: SETTLEMENT MATERIAL, tax key Z, 4 kg
Please help me . I am not getting the user exit / badi for this development.
Please let me know if any one of you know from where to do this?

Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay

Approval required for raising credit memo request and credit for returns.

hi experts,
In Standard SAP, credit memo request has a credit billing block. It has to be released by an authorised person. But for my client
it has to be approved by 4 persons. In case of returns, Credit for returns also needs to be approved by 4 persons.
Client wants Yes or No pop-up screen
The chart Showing Approval for Credit Memo from four users, if all four users approve u201CYesu201D Credit Memo can be issued. And it cannot be issued if any of the four users doesnu2019t approve for credit memo.
Credit Memo request
approval by USER1
approval by USER2
approval by USER3
approval by USER4
Credit Memo
Any idea or suggestion doing this please share...
your reply will be appreciated with points.
Thanks and regards,
-Jay

Hi,
In our project,we have a similar requirement.
For this,we have developed a "Z" table which has the fields as "Credit control area",Customer credit group from,customer credit group to,Refund value from,refund value to,Approval Levels(values like Cash colletion credit manager,Senior order sales manager etc....These values were maintained in Domain),First Approver,Additional Approver,Additional Approver and e-mail address for rejections.
The values for First,additional approvers will be fileld with position numbers which were created by HR team.
Based on the Sales value,a work item will be created in approver's mail box i.e. in SBWP T.Code.If no action has been taken,then an escalation is going to send to managers of these three approvers.This Heirarchy will be mainatined in HR module.
Please check with your ABAPer for developing this logic.
Regards,
Krishna.

Credit Memo Request already exists for item & 1 , & 2, etc

Similar Messages

Maybe you are looking for