Credit memo without changing quantity invoiced but only value
Hi,
I wanted to know how to book a credit memo from a vendor related to a PO by MIRO transaction
This credit memo does only change the value but not the quantity already invoiced.
Thank you
Audrey
Message was edited by:
audrey manileve
Hi Audrey,
From the MIRO screen, in field "Transaction" choose subsequent credit.
Dawn
Similar Messages
-
AP Credit Memo Without Outgoing Excise Invoice
Hi ,
When we create an A/P Invoice for an excise item ,and then when we raise an A/P credit memo for the same .. Automatically an Outgoing Excise Invoice is created ...Now because of this the series of the outgoing excise invoice , which is created usally through sales is disrupted and its a legal issue over here .. So Can you please let me know if there is any other way to raise the A/P credit memo without the OEI being created .. The exicable tick does not work as we are not able to change the Tax code from the A/P credit memo.
Thank you for your answers and suggestions ,
Best Regards ,
Arul..This is a limitation with SAP Business One.
What we do as a workaround is, create a seperate numbering Series for 'Outgoing Excise Invoice' say 'APRet' and set this series as default to some user say 'Raman'
While booking 'AP Credit Memo' we login with user 'Raman' and book the document and in turn it uses 'APRet' series for 'Outgoing Excise Invoice' without violating legal issues.
Hope this would solve your problem. -
Credit memo without cancelling the invoice
Hello ,
my customer has a request to create a credit memo for full invoice and then invoice the delivery note again
with different price in the invoice.........But without cancelling the original invoice.
As far I know SAP standard dont allow this kind of procedure due the status of the delivery.Am I right?
In which way this could be done?What is the right procedure for creating credit memo ?
Thanks and best regards
LHi Luis,
This is kind of wierd requirement. How can there be 2 legitimate invoices for 1 order/delivery??
If you dont cancel the first one, system will not allow you to create a new one.
Did you check with the users as to why they want such thing.. You can expalin them the process and make them understand.
Let us know.
Regards,
SB -
How can create Credit Memo without Quantity
Hi All,
Can any one tell how can i create credit memo without quantity.ie i only want to change the amount of invoive without effecting quantity of item.
Regard's
Harihi,
Create service credit memo for reqd. amount.
Jeyakanthan -
Hi friends.
Is their Any BAPI OR FM To Create Credit Memo Without Invoice.
Or if We can do it By Any Other Method Then Please Tell Me.
Thanks.Hi swapnil,
for that u wud 1st need to create a settlement order i.e SO & in reference to that u wud be able to create a credit memo.
try FM BAPI_SALESORDER_CREATEFROMDATA, BAPI_SALESORDER_CHANGE.
Going further u can use BAPI_BILLINGDOC_CREATEFROMDATA or BAPI_BILLINGDOC_CREATEMULTIPLE.
This is what i'd done for my requirement, not sure if this helps u.
but from what i understand credit memo is a billing doc/invoice itself.
Regards,
Amit -
Credit memo -- with ref to invoice
Hello All,
This is my scenario:
1 Invoice with value 100.
2 Credit memo whith value 100 with ref. to invoice.
3 The system let me create more credit memos for the same invoice exceeding de invoice original value. (it just informes me that there are other credit memos) How can I prevent this ?
I checked copy control and Pos./neg. quantity--i put as "+" and in Item Category TAN- Completion Rule mark as "A".
Regards,
AshuHi Ashutosh singh
Credit Memo and the invoice are different and the two r used in different scenarioes
Credit Memo is the Billing document raised for compensating the customer and the the document is raised with reference to the the Credit Memo request
The scenarios is that the customer places an order with the company and the company delivers the fgoods to the customer in which some of thm are dmaged and the customer then claims for the compensation , so the company asks the customer to return the goods to the company and simultaneously they will pay the compensation
process flow is as
Created the standard order OR
then do the deliver LF
then billing document F2
and then raise the credit memo request for the goods G2
thenBilling which is the credit memo
G2
This is the special process where the goods are received and the customer does not want the replacement of the dmaged goods and instead he wants the amout to be credited
so we have to raise the credit meemo request with reference to the standard illing document and then the credit memo request and then billing document G@
but in the standsrd invoice we havae to creatae the created the standsrd and then the delivery and then the invoice
Invoice
order (VA01)>Delivery(VL01N)>Change Delivery(VL02N)&PGI>INVOICE
EX:
Order type:OR
credit memo:
for the return material or discount is missing for the material,we create credit memo request.credit memo has sent to customer
order (VA01)>CREDIT MEMO(VF01).
NO DELIVERY PROCESS.WITH REF. to BILLING DOCUMENT,we create credit memo request.
EX:
Order type:G2.
The below link will help u
http://able.harvard.edu/ar/wi/create-credit-memo.pdf
http://web.mit.edu/sapr3/windocs/fopcs06f.htm
Reward if useful to u -
A/R Credit Memo Tax Change
Hi all,
We want to punch A/R credit Memo.
When we say copy to A/R Credit Memo from A/R Invoice by selecting only one item from two items present in the invoice.
The selected item gets into A/R Credit Memo. But since 6 months are over , we are not liable for vat 12.5 %
Customer will bear the tax.
So we want to change the tax code. But , system does not allow us to change the tax code in A/R Credit Memo.
Thanking you
MalhaarHi Rahul,
Sorry to bother you after closing the thread.
I tried it everything went fine but invoice is remaining open.
How to close it ?
Close option is not there by right clicking .
Thanking you
Malhaar -
EDI billing outputs are capturing credit memos as well as invoices
I am a newcomer to the company I am currently with, and to this forum, and I have 6 years of experience in EDI and SAP SD.
I am working on a project to determine why our EDI billing outputs are capturing credit memos as well as invoices, and attempting to send them by EDI, causing failures in our Seeburger translator. Most customers donu2019t want credit memos by EDI. My goal is to track backwards and determine what portion of the EDI process in SAP is pulling credit memos rather than just invoices. I suspect that someone intentionally made changes in the past to put this in place, but we need to have a message type that includes invoices and credit memos, to be attached to specific partners that want this, and another more standard message type that sends only invoices.
The message control for the example partner specifies Message Type ZURH (customized by this company for some reason), Application V3 (which seems standard), and process code SD09 (which seems standard). Could someone help me to navigate to an area where I may be able to find out what parameters are used to determine what transaction types are pulled to be sent out by EDI for billing? I suspect that the issue may be in Application V3, but I am unable to find any help to view u2018Applicationsu2019, because application is such a widely used word.
How can I display/change Application V3, in order to check itu2019s contents?
Any other ideas why credit memos may be included would be appreciated, and I always appreciate having the transaction codes mentioned as well.
Thank you in advance for your assistance.
Application V3 (what specifies what transaction type this pulls?)
Message Type ZURH,
Process Code SD09.
Access Sequence used is ZSD1 Billing Documents (Access Sequence ZSD1 does not appear in transaction V/48 (?))
Transmission Medium is 6 EDI.
The program is RSNASTED, and the FORM Routine is EDI_PROCESSING.Satish,
Thanks for the suggestions.
I checked transaction VV33 u201CDisplay Output Condition Records: Billingu201D for Output Type ZURH, Key Combination Sales Org/Payer, and I find the example customer linked to ZURH, as I would expect (5010013645 BEST BUY CANADA Vendor #41448 PY 6 1).
I donu2019t see any data about specific transaction types such as credit memos or invoices, so I may not be looking in the right place. I donu2019t find entries under any other key combination. How would I check if Output Condition records are maintained for credit memos?
In regards to the output type being assigned to the credit memo billing type (ZG2U), Iu2019m afraid I donu2019t know how to check that either.
In NACE, I see that u2018Proceduresu2019 list the CTyp (?), and procedure US0001 is the only one that includes credits and debits. I donu2019t recognize the Ctyps ZDN0 and ZCN0. The billing type is ZG2U, which I don't see in any of the Procedures:
10 1 RD00 Invoice
20 2 ZPRO Proforma Invoice
30 1 ZCAN Canadian Cust. Inv
40 1 ZCOM Commercial Invoice
50 1 ZDN0 Debit Note
60 1 ZCN0 Credit Note
How would I be able tell which u2018Procedureu2019 is being used for Application V3, and how would I change that to another Procedure for testing? -
COPA -Credit Memo without reference to a Billing Document
Hi -
When we create a credit memo without reference to a billing document ( Manully entering a value in condition type), Data flows to COPA as -ve irrespective of +/- sign ticked in KE4I. This creates inconsistancy if we chose +/- for some discount condition types as they come to COPA as positive when the credit memo is created with reference. Any ideas, how to handle this ??
More info: In SD conditon type maintenance plus/minus = positive. It has to be postive then only customer gets credited when a credit memo is created.
Thanks
KrishnaThanks Ajay -
Example:
1) I have a condition type in billing Z012 - Additinal Discounts... asigned to VV230 - Discounts. From billing, VV230 gets a +ve value lets say $100.
2) I have a credit memo ( stand alone, not refering to a billing doc), it has a condition type ZZ12 which can be manually entered and is also assigned to VV230. Now, VV230 gets -ve values lets say -$50.
In reporting, VV230 shows $50 ( +100-50), but the total discounts given to customer is $150.
Where is it going wrong?
Thanks
KP -
Credit memo against a vendor invoice
Hi All,
I am trying to post a credit memo against a vendor invoice. After posting the credit memo I want the outstanding balance against the vendor to be reduced by amount of credit memo when I do F-44: vendor clearing.
So for eg: if the invoice amount is $100 & credit memo amount is $10, I want to see only $90 in F-44. How can I achieve this?
Right now I see Invoice amount $100 & credit memo amount $10 separately.
Thanks!Hi,
you have 3 ways to clear the Open line items(OLTs)
example:
1. follwoing document posted in FB01:
invoice : 40 expense 1000 USD/ 31 vend13 1000 USD
credit memo:21 vend13 100 USD/ 40 expense 100 USD
2. A :you could clear above 2 OLTs using "charge off differece" in F-44, enter posting key 31, vendor and
amount 900 USD. the result should be:
001 31 0001 VEND13 900-
002 27 0001 VEND13 900
B:residual clearing in F-44, you will receive the below result:
001 34 0001 VEND13 900-
002 27 0001 VEND13 900
But the re-requisition ifor above 2 solutions are the values in all fields which are includeded in structutre
KONTAB_1ST are the same.
C:partial payment in F-44, Below result:
001 27 0001 VEND13 100
002 37 0001 VEND13 100-
Then clearing the the left amount 900 in invoice, you should select the inovice and the partial clearing
document together.
Hope above infor. could help you to solve your query!
With Best Regards,
Gladys Xing -
Created and closed A/R credit memo and A/R invoice
Hi All,
How to know who has created and closed A/R credit memo and A/R invoice ? I see
the credit memo sometimes created based on A/R invoice but none the user's create
it. Tks.
Rgds,Hello,
you could use change log, from tools --> change log to see who has closed or created a certain document. It is a history record tools. It is from ADOC, OUSR and other related tables.
Rgds, -
Credit Memo and A/R Invoice linking
Hi
Please help me, how to find relation field between Credit Memo and A/R Invoice.
I delete invoice using credit memo with copy from function.
But when I view last credit memo, i cant find the corelation with my deleted A/R invoice number.
I found remarks, but i think remarks is not the link for document.
I really confuse about this. can anyone help me?
ps: i cant found the relation return and A/R invoice too..
Thanks so muchhJust thought of another trick or two that you might try...
1. Open ANY Credit Memo and use the "Find" Icon (the binoculars in the Icon Line) or use "Ctrl+F" to put the credit memo window in find mode. Put an asterisk in the field where the credit memo number usually is and hit enter...
It should pop up a list of all credit memos with Remarks - look to see if your credit memo is there. Or you can sort the whole screen by double clicking on the "Due Date" column of the display.
You can view an individual credit memo by highlighting the line (making it yellow) and pressing Enter Key to check that out also...
2. If that does not work for you, you can always use the SQL route where the OINV.DocEntry = RIN1.DocEntry and get a list that way where you can look through it.
OINV = Invoice Headers and RIN1 = Credit Memo Lines
Good Luck - Zal -
Solution for viewing AR credit memo relevant to AP invoice
In R12, we no longer have the functionality of applying miscellaneous receipts to credit memos. Using this functionality in 11i, we were able to make payments through AR.
In 11i, we were using API (AR_CM_APPLICATION_PUB.activity_application) for creating and applying Misc Receipts to Credit Memos. In this process, it would first create miscellaneous receipt using API (AR_Receipt_API_PUB.Create_Misc) and then apply it to corresponding credit memo. Then standard remittance process in AR would pick up the receipts and generate a remittance file which would be transmitted to the bank as a payment instruction. Hence, we were not using AP for payments.
However in R12, the above mentioned standard functionality has changed. Now the same API (AR_CM_APPLICATION_PUB.activity_application) creates a receivable activity (“Refund”) in AR and creates an AP Invoice in AP instead of Miscellaneous receipt in AR. This AP invoice can then be paid using Oracle Payments. However, this is making our solution more complex in R12 compared to 11i.
Technical Details from R12
1. In R12 API - AR_CM_APPLICATION_PUB.activity_application is calling API “ar_refunds_pvt.create_refund” instead of “AR_RECEIPT_API_PUB.create_misc”, which creates the AP Invoice.
2. Form - ARXTWMAI is calling one pll in one of the form trigger and in turn the procedure (ar_refunds_pvt.create_refund) is called, which creates AP Invoice.
Un-answered questions:
1. Is there anyway to view the refund in AR independently (Other than going to Credit Memo and see the activities)?
2. How aging and customer exposure in AR are impacted, if payment is not made for the refund AP invoice?
3. Is it possible to drill down to the original credit memos from AP Invoices?
4. Invoice fields like pay group, payment terms are defaulted from the Payables system setups. Is it possible to pass those in the API or can we use different values for these parameters other than payable system setup?Hi Anil,
Thanks for the response. When an invoice has the exact same distribution accounting as a credit memo then your scenario is valid. I think that scenario occurs when you create an RMA for a particular sales order for example. The RMA would then reverse the exact accounting of the original sales invoice.
However a manual credit memo in AR can be applied to any valid invoice for that customer (from any point in time). At a point in time the auto accounting rules may have been different causing the generated account string to be different for the same customer. We regularly have cases where a credit memo for a customer applied to an older invoice for that same customer has different distribution accounts. The credit memo application journal actually adjusts this so that the accounting in GL will be correct.
ie
Invoice from 01-Jan-2008
DR Receivables Account 130000 -> $1000
CR Revenue Account 400000 -> $1000
Now if you create a manual credit for the item in full today, the entry of the Credit memo might look like this
DR Revenue Account 400000 -> $1000
CR Receivables Account 120000 -> $1000
Credit memo application to apply the credit memo to the original invoice:
CR account 130000 $1000
DR account 120000 $1000
Now this functionality was standard functionality in 11i because I guess the designers realised if there was no "correction" journal then your GL would be imbalanced at an account level.
Rgds
Shankar -
Credit Memo without Material Ref.
Hi ,
1) Can we create Credit memo without entering material Reference (Only Value needs to be Credited)?
2) Can we create Credit Memo for Freight & Insurance Value only (no other prices).
Please explain how can we map the same in SD.
Thanks in Regards,
Vikashello again.
for freight and insurance, your approach will depend on how these are treated. if freight and insurance are represented by material numbers, then these are entered in the credit and/or debit memo requests (also in sales orders). this will then be a straight-forward process. these items can have a set price, or the value can be manually entered.
however, freight and insurance are sometimes represented as condition types, these can then be entered manually in the order at header and/or item level again depending on your approach.
regards. -
Partial Credit Memo for A/R Invoice with down payment
Dear All,
I am confusing how to perform partial credit memo for A/R invoice that has down payment inside. Is it possible ? would you please share your solution to me ? Thanks so muchHello,
I am afraid there is no solution yet for this problem. You must create fully quantity credit memo. Maybe, others can have solution yet, so try to do not mark this message answered. The related notes number is 966038. let me know if you need it.
Rgd,
JM
Maybe you are looking for
-
Have a value as str = "2.00000000" want an int value str above tried the below but getting exception Integer.parseInt(str); how to get int value for the above? I just need to get value 2 Thanks.
-
What are the differences between api and sdk
Hi, Could anybody clarify for me what are the difference between API and SDK? I googled for the answer, and couldn't find any thing on this topic. Many thanks in advance. javasfan
-
Runnig DOS commands from the java code?
Hi reader, how can I execute DOS commands (I am on an Windows XP Machine) from my java code and also capture the output? I think the runtime.exec(command) only executes win32 processes. Please suggest TIA Ayusman
-
Table based on Public Synonyms
I have 2 schemas and have created public synonyms and given access from the 1 schema to the 2nd schema. When I create Page / Region of type Report and form (or form) in schema 2, the table name does not accept the public synonyms defined in schema 1.
-
Building flash app for flash 5.5
Hi I saw there was an update for flash buiilder 4.5 to add in support for RIM playbook. Can I build for Playbook in Flash Pro rather than flash builder? or is it only available in Flex?