Credit Notes on Dunning Letters

Hi experts,
I have created dunning letters to print from the dunning wizard but I have a problem.
The credit notes (credit amounts) are grayed out in the Recommendation Report step and I can't tick / untick them. Also, the Credit Notes do not appear on the dunning letters.
Any idea what I can do please?
Thanks,
vankri

Hi,
Thanks for the input, but as far as I'm concerned, MHND table contains entries (fields ZINST, ZINSS, ZSBTR, WZSBT) which reflect the most recent interest calculation, based on the interest rate provided in OB42.
So f.ex. if I have defined two interest rates for the same interest indicator, one of which is valid from 01.01.2011 while the second should be valid from 01.05.2011, after executing the dunning run with dunning date set for 01.06.2011, the MHND table will be updated with the interest calculation which is valid from 01.05.2011.
I was hoping that it would be possible to display two rates, based on the (for example) due date in the following manner:
IF the due date is prior to 01.05.2011 THEN the interest rate should be equal to A
ELSE the interest rate should be equal to B
I guess without the changes to SMARTFORM it's not possible.
Anyway, thanks for you answer.
Thanks and regards

Similar Messages

  • Dunning Letters not printing Credit Memos

    Hi experts,
    I have created dunning letters to print from the dunning wizard but I have a problem.
    The credit notes (credit amounts) are grayed out in the Recommendation Report step and I can't tick / untick them.  Also, the Credit Notes do not appear on the dunning letters.
    Any idea what I can do please?
    Thanks,
    vankri

    Hi,
    Thnaks for your inputs.
    I can be able to generate the spool with the tab "Sample printout" on F150. Output seems to be fine in the spool but when i go for the tab "indiv. dunn.notice" then from there i am not able to take the printout of the same. Usually when user used to run from this tab, spool request automatically gets deleted after use and printout of the same used to come up.
    Status tab is showing like -
    Parameters were manintained.
    Dun.selection scheduled for  for 19.07.11   at 15:59:38
    Dun.selection is complete
    Dunning notice printed,job deleted.
    Samp.Printout scheduled for 19.07.11   at 16:24:16
    Samp.printout is complete.
    Also can you please tell me whether i can use program SAP F150D2 directly for the printing and also will it update against customer?.
    Thanks.
    Edited by: absap on Jul 20, 2011 3:36 PM

  • Dunning Letters not came out

    Hi All
    When i ran dunning for (company 1000) and  (1001) no dunning letters with dunning level 2 or 3 came out. E.g. customer 750929 in  and customers 131050 and 131544. Please let me know what is the reason.
    Thanks & Regards,
    Kiran.

    Hi,
    in T.code FBMP dunning levels print option is not selected. is there any impact for not getting the 2,3 dunning letters.
    Thanks & Regards
    Kiran

  • Dunning letters excluding credits

    Hello,
    I am experiencing problems with my dunning letters. When using the wizard and selecting my BP I can clearly see credit notes on the recommendations report however when I come to print the dunning letter, it is omitting it from the report. Why would this be?
    When running through the wizard I have the following things selected from Step 4:
    Document Type:
    Include Payments Not Based on Invoice = ticked
    Include Credit Note Not Based on Invoice = ticked
    Include Manual Journal Entries = ticked
    Posting Date: From = is left blank   To = 20.05.10
    Due Date: From = is left blank     To = 20.05.10
    Letter Parameters
    Allow Negative Dunning Letter = ticked
    Display All Open Items = ticked
    When i move onto Step 5, I can see my C/N reference for credit note. I then click 'Next' again to get me onto Step 6 and select print. Again the Dunning Letter is omitting the credit note.
    Is this likely to be an issue with the layout or is this how works in that credit notes don't get printed?
    Regards
    Juan

    Hello Bhanu,
    Is this dunning process has customized. If this is customized please check the end to end setup.
    Regards

  • Dunning costs and Dunning letters

    Hi to All,
    Any body can help me out, In this regard.,
        In the report of Dunning cost(Sendiing Dunning letters to customers)., Customers are showing but company code was not showing.How can i get the company code for those customers.
        And one more thing was customer dunning letter cost also showing differently for Customers(for one customer $ 2 and for other itwas variated to $2.50 likewise).
    Where I can see the dunning letter cost per customer.
    Thanks If in advance,
    Dara

    Hi,
    Line items should reach minimum number of days, referring to the due date of net payment, to reach a certain dunning level.
    In FBMP check you dunning interval. If line item has reached interval maintained for 2rd and 3rd level then items will not be dunned.
    Also check dunning levels for your dunning procedure in FBMP.
    If you find no problem with dunning settings then, activate additional log for the dunning run to identify exact reason for the problem.
    Thanks!
    Raju

  • F150 Dunning letters to several customers

    Is it possible to generate several Dunning letters to different contact when the standard dunning generate one letter to one customer?  If yes, can you tell me how. 
    We have case when we have a dunning letter generated to one payer which is an agent.  However this agent collects money from individual customers.  So we set up Final Bill to partner function under the agent.
    Now, when we generate Dunning, it generate only one letter to the agent but is it possible and how to generate the same Dunning letter to several Final bill to partners under this agent.  Does anyone know how and where in the code that Dunning select the customers.  Thanks

    The following OSS note shuld be able to solve your problem:-
    Note 1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt
    If you want to send the mail to several recipients, fill the field FINAA-INTAD with the mail addresses and separate each address with a blank character. There are a total of 130 characters available in FINAA-INTAD.
    Regards,
    Gaurav

  • Dunning Letters and XML Publisher

    I have created a template for the dunning letter print in applications. When we submit the dunning letter generate process it kicks off the print automatically and this gives us a problem as the print doesn't seem to have the XMLP template associated with it and we get no output. We can work round this by submitting the XML Report Publisher Request to get the dunning letter print as required. We do have the "one step" patch applied and other XML Publisher reports are working seamlessly so how do we get the dunning letters print to work seamlessly when we have no control of the submission?
    Any help appreciated.
    Thanks,
    Dave

    Tim
    Yes it works fine in preview. Also works OK if I submit XML Report Publisher.
    The problem is the template is for the dunning letters print report but we don't actually submit that, we submit the dunning letters generate which kicks off the dunning letter print. I guess the submit process within the generate process does not include the template in the parameters list so there is no output available when it runs.
    Only thing I can think of is to modify the print report to submit the XML Report Publisher in the after report trigger but not sure if this is going to work?
    I did see a similar query on metalink where the person was told there would be a solution in XMLP5.5 but I can't see anything in the about 5.5 doc that fits this issue.
    Any ideas appreciated.
    Thanks,
    Dave

  • Dunning letters for claims

    hi experts
              i am trying to configure a process to generate dunning letters for employees claims.
    1.Can dunning letters be generated by using customizing settings in HR or can it only be done using Financial Accounting component?
    2.How do i get data from claims to be used for geneating dunning letters?
    Thanks

    Hi,
    The only difference in the process of dunning for one time customer and normal customer is that, the dunning frequency for one-time accounts is not checked in the master record but for each individual document.
    Apart from this, there is no specific configuration as such for dunning of one time customer.
    You can refer the below link:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/01/a9c58a455711d182b40000e829fbfe/frameset.htm
    Regards,
    Kiron Kumar T.

  • Dunning letters edition

    hi gurus,
    is it possible to edit manually in system before going to print the dunning letters?
    pl anyone advice ? my client wants to edit the dunning in the preview?
    points will be allotted if any one answers immediately.
    regds,
    raman

    Hi Raman,
    Not possible i guess. 
    Why don't you have few templates created for various dunning levels, reviewed it by the client.
    Prakash

  • Dunning letters with smartforms

    Hi everyone,
    I want to use the standard smartform F150_DUNN_SF to create dunning letters but I can't select it in SPRO > FI accounting >... > Dunning > Print
    I can only select SAPscripts.
    I've already done the note which consists in changing the FM FI_PRINT_DUNNING_NOTICE to FI_PRINT_DUNNING_NOTICE_SMARTF with FIBF transaction. Nothing happened. There's still no way to select smartforms...
    Does anyone know how to manage it ?
    Thanks,
    Regards.

    Thanks for your answer
    I have begin to assign print program for dunning notice in the transaction FIBF.
    On the SAP Business Framework: Business Transaction Events screen, from the menu bar choose Settings -> P/S function modules -> u2026 of an SAP appl.
    In the Function module box next to FIFI, I have enter the print program FI_PRINT_DUNNING_NOTICE_SMARTF.
    and I have save the changes.
    In the transaction FBMP. Dunning Procedure : Dunning texts
    when i do display for for ZF150_DUNN_SF.
    I have the message : Form ZF150_DUNN_SF language EN is not available in client 120
    Message no. TD131.
    I have see OB96 but I have a problem with the creation for my driver program.
    I use the smartform F150_DUNN_SF.
    I create a copy : ZF150_DUNN_SF.
    I create a driver program :
    REPORT  ZCALL_ZF150_DUNN_SF.
    * To call a smart form, we would need to call the function module that
    * is generated.
    * Calling the generated function module directly is not an efficient
    * method. For efficient method, click here.
    CALL FUNCTION '/1BCDWB/SF00000018'
      EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
    *   CONTROL_PARAMETERS         =
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
    *   OUTPUT_OPTIONS             =
    *   USER_SETTINGS              = 'X'
        is_sfparam                 =
    * IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
    *   JOB_OUTPUT_INFO            =
    *   JOB_OUTPUT_OPTIONS         =
    *   ET_FIMSG                   =
    * EXCEPTIONS
    *   FORMATTING_ERROR           = 1
    *   INTERNAL_ERROR             = 2
    *   SEND_ERROR                 = 3
    *   USER_CANCELED              = 4
    *   OTHERS                     = 5
    *   OTHERS                     = 6
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    But I have a problem with the parameter : S_SFPARAM ( TYPE SFPARAM).
    I don't know what is this parameter.
    Thanks.
    Edited by: Spawn rad on Jun 23, 2008 4:18 PM

  • Dunning Letters

    Hi all,
    I want to have all levels (10) of dunning letters. Where can i find/open it whitout using the Dunning Wizard?
    Thanks in advance,
    Chief
    Edited by: Philip Eller on Jul 4, 2008 10:14 AM

    Hi Chief
    Are you referring to the PLD for the 10 letters? If so you can access these from the BP Master by selecting the Payment terms TAB and then clicking on the Navigation Arrow next to Dunning term. Alternatively go to Administration > Setup > Business Partners > Dunning terms. Then click on the pencil (PLD) button and select the letter you want to view/change.
    In the case of a preview function for the dunning wizard, this is not currently available as after running the wizard the system automatically prints the letters without a preview function.
    Kind regards
    Peter Juby

  • Dunning letters run automatically on a weekly basis

    Hi Expert,
    Is it possible to make the dunning letters run automatically on a weekly basis? If the answer is yes, then what config do we need to run the report on wekkly basis or what are the steps. Please let me know in very details, because, I am not the SD person.
    Thanks

    On your Router setup page set the MTU value from AUTO to Manual and change the Size from 1500 to 1350 and click on Save Settings...

  • Dunning Letters and Customer Statements

    Hi All
    Our client does not want to send dunning letters and statements on
    backdated invoices for a particular site or sites.
    Please any clue on how to go about it?
    Thanks in advance.
    Ify

    Hi Chery,
    Thanks for your update, Yes I have reviewed the note
    I am stuck with How to create the xdodelivery.cfg file per Oracle XML Publisher Administration
    Also can you please let me know the process of sending dunning letters automatically to the customers, As there is no standard process. I know we have to customize the process by creating bursting program and add to the request set, but I am nor aware of the process. I have seup the process till running the IEX: Send Dunnings for Delinquent Customers programm and displaying the reminders of the customers which have setup in the XML publisher
    Can you please let me know how to send dunning letters automatically to the customers
    Regards
    Vasu

  • Dunning letters and automatic remittance advise for suppliers

    Hi Friends,
    Can any one please provide a document for setting up dunning letters and Automatic Remittance advise for suppliers process in R12
    Thanks in Advance.

    Hi Chery,
    Thanks for your update, Yes I have reviewed the note
    I am stuck with How to create the xdodelivery.cfg file per Oracle XML Publisher Administration
    Also can you please let me know the process of sending dunning letters automatically to the customers, As there is no standard process. I know we have to customize the process by creating bursting program and add to the request set, but I am nor aware of the process. I have seup the process till running the IEX: Send Dunnings for Delinquent Customers programm and displaying the reminders of the customers which have setup in the XML publisher
    Can you please let me know how to send dunning letters automatically to the customers
    Regards
    Vasu

  • Sending 'Dunning Letters' via Email ? - -has anyone succeeded ??

    Hi
    Has anyone had any joy with sending Dunning letters via email at all
    We can get it to work via FAX , but get the following error when trying to send via email
    'connection error on node'
    even tho, there is nothing wrong with the node at all
    via SCOT , we have the default conversion as 'raw text to txt'   which works with everthing else
    If we change to 'raw text' to 'pdf'  we actually get two PDF's - one is blank however
    When viewed via SOST, you cannot open it straight up, you have to open an attachment
    when we queried this with SAP, they say that dunning letters are set up to open as attachments
    The function module is almost identical to that used by statements and remiitances, which works absolutely fine
    I have posted this on a more technical forum as it is not an FI issue, it is a technical problem, which i hope someone has come across and able to resolve for us
    Many thanks
    Tony

    Hi
    Have you see SAP Note 1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt? Please, check the steps that this note suggests. At a release 46B I did with the enhancement F150D001 (at ECC 5.0 it is too), and you have a demo coding in include LX150F01.
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot, according your coding check what is the email address for the customer, if the customer doesn't have email, then the letter goes to the SPOOL order. Check it in the include ZX* or in the BTE.
    Edited by: E_Hinojosa on Mar 1, 2012 5:22 PM

Maybe you are looking for