Credit payment not showing in client

I have just added $4.99 to my account for the first time, however it is saying that I have $0. I have just checked my bank statement and there is $9.98 charge pending from Skype. How do I fix this?
Solved!
Go to Solution.

Thanks for your reports. We are looking into this right now.
What you can do right now:
You can verify your actual Skype credit amount any time via the Skype web account page at www.skype.com/go/myaccount - The amount shown on that page is always accurate even if it's not reflected in your Skype client right now.
If the Skype credit balance in you Skype client isn't updating try placing a paid call to trigger the update. No need for the call to be picked up, just let it ring twice.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

  • Down Payment not showing in PS Reports S_ALR_87013537

    I am executing the ps report S_ALR_87013537, but i am not getting the Down Payment information.
    Down Payment are released from Finance against the Purchase Order Account assignment WBS.
    In Report  S_ALR_87013537, Project  Cost Plan, Actual Cost & Actual+Down Payment is showing but Down Payment Column having no figure...
    rgd
    rkp

    Sorry ...Correct T-Code is S_ALR_87013536
    I am executing the ps report S_ALR_87013536, but i am not getting the Down Payment information.
    Down Payment are released from Finance against the Purchase Order Account assignment WBS.
    In Report S_ALR_87013537, Project Cost Plan, Actual Cost & Actual+Down Payment is showing but Down Payment Column having no figure...
    rgd
    rkp

  • WRT54G v6 client table not showing wired clients

    I have a WRT54G v6 using the lastest firmware.  Is there any 3rd party software that can display what clients I have on my network?  The reason I'm asking is because my router will only show the wireless clients and not the ones connected on the wired side.  Other than that everything works fine.

    I have similar problem. DHCP client table shows only wireless laptops using dynamic ip address. All my wired destop (dynamic ip), and other static ip devices both wired or wireless do not show up in DHCP client table. Any idea? I have v8.

  • Crystal report viewer do not show on client computer installation

    hi
    hope all you are fine
    i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
    1. CRRuntime_13_0_tr.msm  2. Microsoft_VC100_ATL_x86.msm
    3. Microsoft_VC100_CRT_x86.msm
    4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
    when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
    i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show. 
    Please Help

    Hello,
    For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Customer Credit Limit Not Showing in VKM4

    In some cases the customer credit limit is not being displayed in VKM4 for dynamic credit check holds. It seems to happen for certain customers but we can't tell why. The holds are valid, the limit is just not showing and we'd like to know if this is by design or a bug.
    We are running ECC 6.0
    Thanks

    Dear wradue      ,
    What difference did you find comparing the FD32 of customers with credit limit and without credit limit in VKM4?
    Thanks & Regard,
    Hegal K Charles

  • MSE 8.0.110.0 not showing any clients

    hi all,
    i just posted a reply in some other thread stating the same thing but decided to make my own topic.
    set-up:
    2x5760 running 3.6.0
    mse appliance running 8.0.110.0
    prime infra in VM running 2.2
    ap - 3702I / E
    problem:
    wireless clients not showing on the prime floor maps.
    what have done so far:
    wlc synced with mse thru nmsp - check
    wlc added to prime - check
    mse added to prime - check
    mse synced with wlc thru prime - check
    all aps positioned on the maps - check
    CAS enabled on mse - check
    NTP configured to wlc , mse and prime - check
    check time all synced
    nmsp status in mse - active
    nmsp status in wlc :
    WLC1#show nmsp status
    MSE IP Address   Tx Echo Resp  Rx Echo Req   Tx Data     Rx Data
    x.x.x.x      618           618           43878       10
    WLC1#show nmsp subscription sum
    Mobility Services Subscribed
    Server IP         Services
    x.x.x.x       RSSI, Info, Statistics, AP Monitor, Attachment, Wired Location
    WLC1#show nmsp subscription deta
    Mobility Services Subscribed by 10.29.220.9:
    Service         Subservice
    RSSI            Mobile Station, Tags, Rogue
    Info            Mobile Station, Rogue
    Statistics      Mobile Station, Tags
    Attachment      Wired Station
    Location        Subscription
    AP Monitor      Subscription
    troubleshooting done so far:
    deleted then added mse on prime then resynced to wlc
    reconfigured nmsp on wlc and resynced again with mse
    rebooted mse - no avail
    rebooted prime - no avail
    reboot wlc - not an option coz theres a lot of users =)
    tia,
    chris

    Thanks Pete, I have done that, in fact I used a useful utility to update that property on a batch of servers.
    Thanks for the thought, any additional ideas?
    Cheers
    Andrew

  • Additional Payment not showing.

    Hi
    There is a problem Additional payment is not showing in the payroll log.
    Pls help.

    Hi
    Check necessary infotypes and RT.
    Is the value is coming in RT or not?
    Check and reply.

  • Payments not showing in payment history

    Verizon recently assigned a new account number to my account, and now my payments since November are not showing and the balance due is not correct.  I also checked the payment history and it just says "we are experiencing issues", which it has shown for atleast the past two months.

    Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.

  • Cisco prime 2.1 not showing wired clients connected to Cisco 3850 switches

    Hello All,
    I have around 80 Cisco 3850 switches at a customer network and they are using prime infrastructure 2.1.2 to manage these devices. Most of the features are working fine except that the prime does not show the wired clients connected to the switches. The wireless clients are shown properly but not the wired clients. Their core switches are nexus 7k. The SNMP configuration on the switches is as follows.
    snmp-server group xxxx  v3 priv write xxxx-VIEW-WR
    snmp-server view xxx-VIEW-WR mib-2 included
    snmp-server trap-source Vlan100
    snmp-server host x.x.x.x version 3 priv testuser
    Please help me to resolve this issue.
    Shabeeb

    I managed to get the end hosts connected in 3850 switches with the use of snmp context command. But now the issue is that prime is showing only the mac address of the device , not the IP address. 
    Is there anyway to resolve this issue?

  • Scout not show all client

    Hi,
    I'm trying to use the customizing scout .
    I start the customizing scout (SCOUT T.code), selecting "Entire System Landscape" and marking all system roles
    It show only Clients 000, 001& 066,is only showing.
    Plz give hint to show all client.
    Rg,
    Karthik

    HI Rajeev,
       In SMSY shows all client,also i generate the RFC  for the same.
    Regards,
    Karthik

  • After recent update Credit is not showing

    So, when making a call, how do I have the amount of credit showing all the time, like it used to ?

    Our server is running Subversion 1.6.  For SVNKit, if I go to Tools, Preferences, Versioning, Subversion, it says:
    Subversion Client:
    SVNKit/1.7.5 Client Installed, JNA (https://jna.dev.java.net/) Disabled
    I don't know much about SVNKit, is that what you were looking for?  Do you need a server side version of SVNKit?  I'd have to contact my sysadmins for that.
    The issue I'm currently having is related to an SVN Update I performed with Tortoise SVN, not the JDeveloper SVN plugin.  Why would the IDE see the new file (it's displaying in the Application Navigator), but it wouldn't get picked up by the Deployment to the Integrated WebLogic Server?
    Also of possible interest, when I right click on my project, choose "Project Properties", select "Deployment", select a Deployment Profile and choose "Edit...", then go to File Groups, WEB-INF/classes, Filters, then go to the package where the class resides, the class is not there.

  • Payment not showing paid unless you log out

    why after i make a payment, that my overview still shows i still the same amount on the bill. there isn't a refresh button.i click on something else and go back and it still show i still owe the bill.i have to log out, then back in to see the $0 balance.  this is annoying...

    Yep   When you pay someone it is never instant > paypal CREDIT that person for you (so you get your item more quickly) and then paypal take the wait for your funds to transfer to your paypal account from your bank account to pay them back. The funds can leave your bank account anytime from 2 hours - 3 days later. I paid someone 2 days ago via friends / family > they got the money but its not left my bank account....yet.    ************************************* I give up my time to help you so a thank you or kudos would be cool.
    Marking one of my replies as a solution would be appreciated if I sorted your problem.

  • Payment not showing on bank account but paid?

    Hi all, I'm new to PayPal so I'm hoping someone can help me. I purchased a few items 4 days ago and got the confirmation email of a successful payment. One item has already been shipped. However, the money has not come out of my account and there is no record of the transaction on my bank statement. I do not have a negative PayPal balance and shows that the items are "successful" or confirms or whatever it says. Any idea what's going on?

    Yep   When you pay someone it is never instant > paypal CREDIT that person for you (so you get your item more quickly) and then paypal take the wait for your funds to transfer to your paypal account from your bank account to pay them back. The funds can leave your bank account anytime from 2 hours - 3 days later. I paid someone 2 days ago via friends / family > they got the money but its not left my bank account....yet.    ************************************* I give up my time to help you so a thank you or kudos would be cool.
    Marking one of my replies as a solution would be appreciated if I sorted your problem.

  • 0221 payment not showing in offcycle workbench

    Hi All,
    I my case when i create 0221 infotype and go to offcycle workbench i am not see my payment record. This is happening only in PRD but in QAS it is working good.
    I have check both the sys. from the side of conf. and tech both are same. It was running good till last week.
    When i do use offcycle in payroll simulation it is showing my 0221 data in RT table. This will be my alt. way to go.
    Could somebody help me out what is missing in my case or what would have caused this issue.
    Appreciate any kind of help.
    Thank you
    Mamatha

    Hi Mamatha,
    Did you check the Off cycle reason you are using for IT0221?
    Arti

  • IDeal transfer / Credit payment not processed

    So I bought some Skype credit the other day, sort of testing before I would invest more.
    Since iDeal is a bank to bank transfer and the transaction was completed immediately, I expected to see the credit pretty quickly so I could get to work with it.
    After the initial 24 hour waiting period expired I once again looked into why I still had not received my credit, and found out that the payment hadn't been completed. My bank transcript however states otherwise, but I was to ignore this transaction and try again, and I guess say goodbye to the money.
    I have all the information necessary to complete this order, and it would appear that the postback got interrupted. Nobody in support appears to have any connection, or even contact details, for departments that could help me complete the transaction (engineering, administration), and the corporate office number for Skype still eludes me.
    I've sent an email and am awaiting a reply, but by now I figure a forum post couldn't hurt either.

    Hi Anil,
    Is it related to T&E?
    Is your company using AMEX ? How the credit card payments are done to the card vendor and how the credit card statements are coming into the SAP System ?
    Can you please explain the step by step process, which you are following ?
    Regards
    Mohit

Maybe you are looking for

  • WebEx/Jabber Installation

    Recently WebEx became Jabber. Two of our users (out of 12) get the message "Cannot connect to server" when they try to open jabber. All other users have no issues.

  • Photoshop Elements 4.0 and windows 7 compatibility.

    I just recently purchased a new computer with windows 7 on it and have been trying to get my tablet and art programs on it, one of which it PE4.0.  When trying to install it Im told that its incompatible, so I am wondering if there is someway to rect

  • Copying Standard SAPScript to ZSapscript...

    Hi, I want to copy standard sapscript to zsapscript. I go in SE71 and enter the name of Z sapascript form and then create. Now when I go to Menu-> Form-> copy from: I give form name as MR_PRINT and give language as EN. It says MR_PRINT LANGUAGE EN is

  • Silent post to php instead of getURL()

    Hi everyone...I'm very new to FLASH and I've created a submit to email with AS1 and AS2...Basically I'm currently using a getURL method in my action below...however when you submit eveything works but I don't want the page to refresh. I wanted to sil

  • Error when double clicking rdf file?

    I'm using Reports 10g R2 on Windows XP Pro SP2. When I try to double click on a report file (ANMSC.rdf) the Report Builder starts, but doesn't open the report file. I get the following error: Windows cannot find D:\ANMSC.rdf. Make sure you typedthe n