CRIO Doesn't Show Up In The Distributed Systems Manager

All,
Any idea why my cRIO wouldn't show up in the distributed systems manager? I'm running Real Time 3.2.1 and I've already deployed my shared variables. I can see the cRIO through MAX and with my project just fine.
- Ken

Hi Ken,
I have a couple of questions/things we can try:
1. How are you connected to the cRIO? (Crossover, switch, router with DHCP)
2. Are you able to manually add the cRIO by IP Address to My Systems? (Right-click My systems, select Add Systems..., type in the IP Address and select OK.)
3. Are the shared variables hosted on the cRIO? If not, do you see the Shared Variables in the Distributed System Manager?
4. Try enabling CPU Load Monitoring through the cRIO Target Properties in the LabVIEW Project (Right-click cRIO, select Properties, go to Miscellaneous and check Enable CPU Load Monitoring, deploy the settings and reboot the cRIO).
5. If you already had Distributed System Manager, does pressing F5 to refresh help?
Finally, I would like to know what version of Distributed System Manager/LabVIEW you are using.

Similar Messages

Some systems doesn't show up in the all systems. why?

Hi
We had a SCCM 2007 sp2 environment before. then we changed the server and installed a fresh SCCM2012.
We use active directory client deployment method. even i tried installing the client from the exe file of ccmsetup.exe
until now 120 systems client has installed successfully but we faced two issues:
1- on some systems ccmsetup process exits after 10-20 seconds!!
2- on some systems even after a successful installation, the system wont show up in the config manager console.
any advise or help?
thanks

Yes, those are client side logs. If the client cannot communicate with the server, there is no way for the server to have information about the client in its logs.
Jason | http://blog.configmgrftw.com | @jasonsandys
Thanks a lot, but I couldn't find any errors. Just in ClientStartupManager.log there is an error :
[----- STARTUP -----] ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
Machine: OA-NEW ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
OS Version: 6.1 Service Pack 1 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
SCCM Client Version: 5.00.7958.1000 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
'RDV' Identity store does not support backup.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
CCM Identity is in sync with Identity stores
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Unable to backup CCM Identity in any Identity stores. (0x8000ffff).
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Deleted Certificate ID from registry successfully
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Client is set to use HTTPS when available. The current state is 224.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
[RegTask] - Executing registration task synchronously.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
[RegTask] - Client is already registered. Exiting.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
Read SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
Evaluated SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
No SMBIOS Changed ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SMBIOS unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SID unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
HWID unchanged ClientIDManagerStartup
12/31/2014 11:01:50 AM 5420 (0x152C)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Windows To Go requires a minimum operating system of Windows 8
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Computed HardwareID=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
Win32_SystemEnclosure.SerialNumber=Chassis Serial Number
Win32_SystemEnclosure.SMBIOSAssetTag=Asset-1234567890
Win32_BaseBoard.SerialNumber=131118928908938
Win32_BIOS.SerialNumber=System Serial Number
Win32_NetworkAdapterConfiguration.MACAddress=BC:EE:7B:9C:BE:8B
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
HardwareID2=6DE60500010000FE
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Mahdi. Ghorbanpour http://yektagostarhezare.ir

RT Target Resources and Distributed System Manager

Hello all,
Does anyone know of some potential reasons why an RT target might not publish its CPU and memory usage? This particular target is a cFP-2200 running a complete installation of FieldPoint 6.0.2 (RT 8.6) including System State Publisher. For some reason I can't view the memory usage on this target and I haven't been able to figure it out.
Thanks in advance,
Jim

Hello Hillman,
Thanks for your reply! I sort of
figured that this one would go by the wayside and not be answered.
Actually, I'm not using RTSM; I'm using the Distributed System Manager
- It's a relatively new tool that ships with LabVIEW RT 8.6. In my
humble opinion, I find it to be much superior to the RT System Manager
in its own way. The only downside, really, is that you can't log with
it natively, but there are ways around that.
You've
got some great suggestions. I definitely was using the correct IP, I
could target it with LabVIEW because I loaded my application on there,
and I didn't get any boot errors when I connected. You're absolutely
right, too, that the CPU is always maxed out at 100%.
I
guess I was perplexed because, one moment I could see the resources in
DSM (is that acronym valid yet?), and after I reloaded the software
from scratch, I could see lots of variables on the target, but for some
reason the system resources weren't showing up. After no one jumped on
the question, I went back to tweaking various settings and realized
that I hadn't rebooted after enabling VI Server. In fact, I didn't
think that VI Server would be the issue and hadn't really thought of
checking there. My reasoning followed that, if all of the other
variables showed up, surely it wouldn't be VI Server, but that fixed it.
I definitely appreciate your getting back to me, though.
Cheers,
Jim

Distributed System Manager SysMan ACL.acl

I've managed to lock myself out of the Distributed System Manager.
The help file http://zone.ni.com/reference/en-XX/help/372572A-01/sysman/ni_acl_db/ says to reset security settings remove the SysMan ACL.acl file from the default LabVIEW Data directory. I cant find it
I've completed a search on my hard drive and found no file with an .acl extension
I was logging in and out trying to get the Shared Variable Engine operating correctly and for some reason I decided it would be a good idea to add a new host. A message along the lines of "Changing this setting will no longer allow (Nobody) to log in" It was a Friday afternoon and I presumed that as it was trying to log in with the User (Nobody), this was why my Shared Variable Engine would not connect to my OPC Server
Now the host name I changed it to does not work. It says the user is invalid.
Any ideas how to reset the host settings so I can at least get in?
Alan

Hi Tony
Thanks for your help
See attached I went to Actions>ConfigureSecurity>then selected add New User/Host
Then checked configure new host and typed in the username of the PC.
Not the cleverest thing Ive done recently
Alan
Attachments:
Doc6.doc ‏44 KB

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel

Hi,
I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV.
I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display.
I am trying to use my laptop which doesn't have 3D display but has Graphics card which supports 3D to play 3d games and see them on my 3D TV.
I checked online and found out that I need to change "Stereoscopic 3D" settings in NVidia control panel but Stereoscopic 3D option doesn't show up in the control panel. Very few options are there. I have updated drivers to the latest level but still can't see "Stereoscopic 3D" option in NVidia control panel. So will you be able to help me out what I can do to see the option? Thanks in advance.

I have got an gs70. Exactly the same problem. Unfortunately this hdmi outputs are connected for the intel graphics cards. And intel does not support 3d.
I was actually very angry with MSI. Because they do not mention in the description. They promot just the gtx card. And forgot to mention about the hdmi connection.
Forget the 3d tv. Or you can buy an external mini pci-e graphics card adaptor.
search in google for : EXP GDC Beast Laptop External Independent Video Card Dock

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Preview doesn't show up in the capture window

When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

Mobile me gallery doesn't show up in the widget

I posted some albums to mobile me through iPhoto. When I tried to put them on the website through iWeb, there were no galleries in the widget menu. Why? Is it because my site is an independent ".com" site versus being a "me.com" site?? Help!

klcwebdesign wrote:
...it still doesn't show up in the widget menu
I dunno what more to suggest, except to say that MobileMe live chat support is now 24/7 — see this announcement:
http://www.apple.com/mobileme/news/2009/04/live-chat-support-247.html
And to answer your previous question, you can simply change the settings and republish. See this iPhoto Help page:

IBook doesn't show up in the Textbook section

Hi Folks,
I recently had my iTextbook approved through the iBookStore (Physics: Fundamentals and Problem Solving), but noticed that it doesn't show up under the Textbook --> Science and Nature section, even when I choose "See All." Does anyone know how to get this moved to the correct section? Thanks much!
Dan

So I've been waiting 10 days now for my iBooks Author textbook to appear. The upload went fine, but as of today, nothing appears on title search.
I've noticed some folks mentioning they were approved through the iBookstore. Does that approval come in an emai? I see no status indicators in iTunes Connect to check on progress of releasing the title.
Can anyone shove me in the right direction?

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

When i copy songs with home sharing it shows it copying but doesn't show up in the library

When I copy songs with home sharing it shows it copying but doesn't show up in the library. What should I do ?

Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB

I purchased a game name Einstein and I can't see it , it doesn't show up in the menu!?

I purchased a game name Einstein and I can't see it , it doesn't show up in the menu!?

This may be related to the "feature" that displays all Greatest Hits albums as one album, or it may be that the tracks are marked as compilations. Find one of the missing artists in iTunes and select the tracks from the album. Make sure the Compilations flag is set to No. Change the album title to something unique, e.g. if it's called *Greatest Hits*, rename it to *Greatest Hits, Artist*. Resync your iPod and see if it helps. If so, repeat the treatment.
tt2

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?

I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?

Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy

CRIO Doesn't Show Up In The Distributed Systems Manager

Similar Messages

Maybe you are looking for