CRIO: error while compiling real-time application

My code can be run when the cRIO is connected to PC with Ethernet cable.
But when I want to compile (build) my code, I get the following massage.
Also the picture of the massage is shown below.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 6 occurred at Copy in AB_Targetfile.lvclassostBuild.vi->AB_Application.lvclassostBuild.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Generic file I/O error.
E:\2013_05_23a_research\2013_05_27a_Richard's\exercise\2013_07_07_exampleFinder_1DMAFIFO\examples\CompactRIO\Module Specific\NI 9234\builds\NI 9234 Getting Started\NI-cRIO9024-UConn\My Real-Time Application\c
Solved!
Go to Solution.

Hi Cashany,
What version of LabVIEW Real-Time are you working with? What cRIO are you deploying to? What version of the NI-RIO Drivers are you using?
Behind your error dialog you have a Load Save Warnings dialog. What is the full expected path that LabVIEW is expecting to find this VI at? Have you tried correcting this conflict by moving the file to the expected path or changing your project to expect it from the new path?
Also I notice that the paths that are listed are rather long. Is it possible that your problem is related to this KnowledgeBase, Error 6 Occurs at Create Folder When I Build my Real-Time Executable?
Miles G.
National Instruments
Applications Engineer

Similar Messages

Error while running Real Time Job through SOAP UI

Hi Experts,
I am using real time job for search the duplicates in the data base using attribute values. After running the job iam getting correct result in the xml message.
I configured real time job in management console and taking the WSDL and giving the in put in SOAP UI then iam getting the message like this after 2 timedouts.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Sender</faultcode>
<faultstring>Web Services is unable to process the request to call real-time service 'RT_SEARCH' using Access Server 'uplt-abk-052:4000'. Error: Server sent back error: Communication Error. See real time job log for details.</faultstring>
<faultactor/>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
In the real time job log file iam getting the message like this
(12.2) 06-01-10 09:37:41 (E) (0620:2732) Unknown: SP(RT_SEARCH, UPLT-ABK-052:3501)::flowThread() Flow became invalid while waiting for reply from real time job. (BODI-300136)

In Management Console,
PLease take a look at websevices-> partciular JOB-> historyLog-> errorlog and tracelog to see the more details of the error. It should definetly whats the cause of the error.
-Subhadra

Error While Compiling Jdbc Application

Hi,
I am getting an error while compiling a JDBC application ... as shon below...
please help me regardinmg this and also please specify how to include jar file ....
JdbcApp.java:5: package Oracle.jdbc.driver does not exist
DriverManager.registerDriver(new Oracle.jdbc.driver.OracleDriver());

Thanx for that!!!
but i am still getting the exception...
D:\Java>java JdbcApp
Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
ter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:366
8)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:353)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:371)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:551)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at JdbcApp.main(JdbcApp.java:7)
kindly solve this...

Real-Time Application doesn't run; source code works fine

The short version is I'm programming a cRIO and apparently the RT code isn't running after being deployed and I can't figure out why. This is further complicated that I'm doing all this remotely and I don't have direct access to the unit since I'm 500 miles away. I'm working through a couple of other guys who know some LabVIEW, but neither works at the site so they have to explicitely travel out there every time I have a bright idea.
I was out there a few weeks ago. During this time I created a simple cRIO code, since I'm new to cRIO, that allowed the user to move a control and change a graph. It worked fine, but I should note it did not have an FPGA component. After that I worked on the real code, which reads some sensors, displays the results on a UI and logs the results. This did have FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could complete a release version and deploy the RT as a compiled application. I sent them the release version later, my contact deployed it but got network stream errors when running the UI.
After hours of looking at network problems and sending over debug versions, I tried creating a log on the RT level so I could see what was going on. The log doesn't even open, even if it's the first command in the code. I pored through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took me in a new direction.
I had my contact use the RT debug console and when he pulls up the RT front panel, it shows a broken run arrow. He clicks it and nothing happens -- no running, no bug list. If he pulls up the bug list manually, it's empty. Again the RT works fine if you run it through LabVIEW and not as a compiled real-time application. He also noticed that the Open FPGA VI was grayed out on the block diagram. No other icons are.
So the problem appears to be that the compiled RT application is getting some kind of error but not telling me what it is, and it seems to be related to opening the FPGA. I've recompiled the FPGA and RT. I've had him recompile the RT himself, but not the FPGA because it would take hours. He's downloading everything correctly to the cRIO. The RT is set to run automatically. He's rebooting the cRIO every time he deploys the RT. They have LabVIEW on a computer there but it doesn't have the right drivers to run the code from the LV environment. I'm resisting having them install the dirvers because downloading big files is complicated there due to security restrictions and a lousy network connection at a remote site. Besides that doesn't solve the problem of the RT executable not running the same as the source code, which according to the thread above appears to be a thing.
The latest thing I'm trying is that I sent him instructions for how to build a source distribution from the project I sent and try deploying that to the cRIO. Even if that works I'm not sure that's an acceptable solution because I assume running the VI rather than the EXE is slower, and they need speed on this project.
I simply have no idea where to go from here. I probably need to get direct acess to the cRIO and I might be able to convince them to ship it to me so I can figure this out, but I'm not sure where I'd even start other than the standard voodoo debugging of "try stuff at random until something works". I'm open to suggestions if anyone has managed to solve this before.
Code snippet of the first part of the project is attached, though I'm not sure how much good it will do. I'm really stumped and the client is getting frustrated with how much of the budget is going to fix this.
Solved!
Go to Solution.
Attachments:
RTMainSnippet.png ‏623 KB

Have you checked the cRIO error log? Usually I'd access it through the LabVIEW project (right-click on the target, don't remember the exact menu options and I don't have the RT toolkit installed on this machine to check), but it must be stored somewhere on the cRIO as well, although I don't know if it's in a human-readable format.
Which cRIO are you using? What exactly do you mean by "debug console"? (This may be related to the cRIO - the newer ones have video out, although I don't know if that's what you're referring to.) With a broken run arrow, you won't get an error list unless you're running in the development environment.
Have you confirmed that the software installed on the cRIO matches the version you're using for development, including patch level? Get someone to connect to the cRIO with Measurement and Automation Explorer, and get a list of the software installed on the cRIO.
Sounds like the ability to connect with a remote debugger would be helpful here, if you can get the right drivers installed on the machine with LabVIEW that's connected to the cRIO. Make sure all driver versions match what you're using. Any chance you could then do a remote desktop connection from your work site to the remote LabVIEW machine?

Hypervisor: Create Standalone Real-Time Application (Error at deploying: File not found)

Hello,
I am using Hypservisor. With "Build Specifications" in the project explore I want to create a standalone real-time application.
In my first try I only want to print some texts onto the real-time console (HyperTerminal) using the function "RT Debug String.vi". I built the real-time application successfully and got the rtexe-file locally on the windows system. But as I tried to deploy the application to the target system, I got the error: "File not found". Please check the attached file "error.txt" for details.
I don't understand which file is not found. Or I used "\" as path separators. Is it wrong? I'd appreciate if you'd have any idea of the problem. Thank you very much.
Regards,
Scarletice
Solved!
Go to Solution.
Attachments:
ERROR.txt ‏1 KB
builds.zip ‏153 KB

Hello Casey,
Thank you very much for your reply and your interest in our project. We are using Real-Time Hypervisor for the setup of our test stand. We use the Windows system to show the GUI and the Real-Time system for the real-time machine control and online data storage. We use shared variables and shared memory for the data exchange between the two systems.
The system works generally quite fine now. But we still have to face new problems at each step forwards. I'm sure, I'll have more questions. I'd appreciate your advices. Thanks sincerely.
Best regards,
Scarletice

CRIO and ni 9234 modules not working or communicating through fpga with accelerometers, fpga connected to real time application which is also connected to shared variables linked to modbus slave

Hi,
I have a compact rio which has a 4 way chassis attached to that chassis is three ni9234 modules they are linked using fpga to a real time application then using shared variables in the low speed loop that are linked to a modbus slave to communicate with dcs, the ni 9234's have accelerometers connected to them with iepe ac coupled option on the c modules, my problem is the real time application seems to be running okay even when power loss occurs it restarts with no problem and the fpga writes to the portable hard drive bin files fine but without a accelerometer connected I get low noise readings as soon as I connect a accelerometer to any one of the 10 outputs it just goes to a fixed number (0.03125) as soon as disconnect it again it reverts back to reading noise, I have run a scan on the modules and only get a spike when I connect or disconnect the accelerometer, I have tested the voltage at the pins of the module and I get 22 volts dc which makes it more likely that the hardware is not the problem but a software is maybe causing this to hang-up, I attach project and files for your perusal. I also carried out a new project which in scan mode directly linked the module input to shared variable and the same scenerio again. Help would be much appretiated.
Many thanks
Jason
Solved!
Go to Solution.
Attachments:
logger 2plusmodbus2.zip ‏679 KB

Whren using waveform acquisition with the 9234s we recommend the following FPGA and RT template.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/209114
it can be extended as a data logger with:
http://zone.ni.com/devzone/cda/epd/p/id/6388
or using shared variables combined with scan engine
http://zone.ni.com/devzone/cda/tut/p/id/9851
The FPGA in all of these, as well as the RT framework have been used successfully by 1000s of users. I would recommend giving these a try.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Attempt to build real-time application failed

When I try to build my real-time application in order to deploy it to a crio device, it fails. I can run the program just fine by opening it and clicking run. It can deploy and run all day that way, but it needs the computer that way too. So I need to be able to build and deploy it. When I do a build preview it completes just fine with no errors. I have set the program I want to start up as the startup and my subVIs virtual folder under always include. This is typical procedure for deploying projects to the crio.
When it crashes I am getting an error:
The build was unsuccessful.
Possible reasons
An error occurred while saving the following file:
C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\rvi\ClientSDK\Core\ModuleGeneration\CommunicationInterfaceUtility\niFpgaDmaChannelImplementation.ctl
Invoke Node in AB_Source_VI.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_RTEXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_RTEXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_CreateNewWizard_Invoke_CORE.vi->RTBUIP_CreateNewWizard_Invoke.vi->RTBUIP_CreateNewWizard_Invoke.vi.ProxyCaller
<APPEND>
Method Name: <b>Save:Target Instrument</b>
I put in a service request (Reference#7259553) but I am just not getting help fast enough. I am on a real deadline here and I just sort of expected the application builder to work like it has always done. I have done this a million times with other applications and never had an issue like this.
Thanks in advance for your help guys.
[will work for kudos]
Solved!
Go to Solution.

With the fantastic help of applications engineer Will Schoettler, we were able to solve the problem.
1. First we tried creating a new project file from scratch, adding all the files and compiling the fpga. Same error.
2. Next we made individual builds deploying each subvi individually to see if one of them was causing the error. Each built without a problem.
3. I tried to create a new build for the main crio program and tweek the settings. Instead of manually adding the subvi and variable library folder to the 'always include' section of the build option, I simply added the main VI to the startup programs list and was going to let LabVIEW figure out which VIs to add. For some reason this gave me a more verbose error explanation and gave the following reason as the last sentance in the error explanation
"Due to operating system limitations, LabVIEW cannot create the folder because its complete path contains too many characters."
I moved the project folder to c:/ , fixed the broken references in the project, and it built the VI and deployed it just fine.
The builder creates a directory with a really long path name within your project folder, so if you have your project folder deep in your directory tree it will attempt to create files with paths too big for windows to handle.
Mad Kudos to Will Schoettler the app engineer for such a potent and thorough troubleshooting task list of things to try that lead me straight to the solution. I am glad it was something so simple and not some form of file corruption or something wrong with my code.
Thanks for trying to help guys.
[will work for kudos]

Error while compiling the PO Item Category KFF

Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
Reem

Hi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem

Real time application

hi
i had a problem creating a real time application.
the project have all the files on the image1(proyecto), I'm trying to create the real time for then run the host executable.
i put all the sources files like image2(sourcefilesrttarget), the others configuration still quiet.
then i built it, set us startup, deployed it, and for last run as startup, reboot the rt target, but then when i gonna run the host executable, the variables doesn't work and the executable is already on the firewall.
when i just connected the CRIO- rttarget ,deploy the principal vi for the target that is Aplicacion RT principal controaldor ,then run the principal.vi of the host it works fine.
So i don't know why with the building and deplying the real time doesn't work? maybe something of configuration it's missing but i don't know.
thnks for any help
Attachments:
proyecto.png ‏72 KB
sourcefilesrttraget.png ‏67 KB

Thnks Omar R.
yes we are missing some configuration but i don't have idea what is it.
i followed the first link to deploy network variables but this doesnt work when i run the exe, and then when i gonna run the principal.vi since labview i get the next error
Possible reason(s):
LabVIEW: (Hex 0x8BBB0005) Unable to locate the shared variable in the Shared Variable Engine (SVE). Deployment of this shared variable may have failed, the SVE has not started, or the SVE is too busy to respond to this request.
i post you all the configuration windows about the .EXE

Flex error while deploying a VC application

Hi Experts,
Though I have rarely worked on VC developments, I have to troubleshoot an issue wherein we are getting following error while deploying a VC Application.
Error: Error in compiling flex application. Consult log file for details.
I have got a log file and it has written out 100s of lines of log, however, following is the important part from the log file:
#00145E9635CE0060000016940015E0C60004A07BE7C55172#1302353936732#/System/Server/VCServer
#sap.com/VisualComposerServerEar04
#com.sap.portal.vc.server#ganeshb#35216##n/a##b1528d4062a811e0aedc00145e9635ce
#SAPEngine_Application_Thread[impl:3]_12##0#0#Debug#1#/System/Server/VCServer#Plain###
Server Error:Failed to import model - attribute is missing in imported file bytes are ï»¿<?xml version="1.0" encoding="UTF-8"?>
Any help on how to resolve this?
Thanks in advance,
Ameya
Edited by: Ameya Pimpalgaonkar on Nov 16, 2011 7:31 AM

Hi Ameya,
If its VC 7.0 then you must be using Flash Compiler.Try changing the compiler to Flash at this path
Tools->Options->Compiler->Change 'Runtime filed to Flash'.I hope this should solve your problem.
Naga

How to download an FPGA vi along with a real time application

Hello
I am targeting cRIO 9012, cRIO 9102. I downloaded the FPGA vi on flash memory and then built a real time application and set it as startup. But there was no signals on the modules IOs which are handled by FPGA vi.
Also the shared variables of that application when running as standalone aren't accessible. Please provide me the steps that should be followed to access the shared variables of a standalone real time system. Please help me resolve these problems.
Best Regards
Mani

Hi Mani,
What modules do you have? What kinds of signals are you measuring?
Have you deployed your shared variable library on your host PC?
Regards,
Jeremy_B
Applications Engineer
National Instruments

Error while compiling Model in VC 7.1

Hi,
I am getting a error while compiling model in Visual Composer 7.1.
An exception occurred at the server while running the build process, reason: Extension with id com.sap.vc.runtimeproviders.null not found. For more details please refer to the log file.
Can any one please tell me what the error is?

Hi
The common reason for this kind of error is a misconfigured model or data service proxy
To verify this is not the case please follow these steps:
1. In the DC where you get the error open your models one by one and verify that the runtime provider that is configured is set properly (usually should be WebDynpro but could be Voice or Portal if this is the runtime that you are targeting your application to)
This configuration is accessible in the configure panel when your model is in focus
2. Do the same as described in bullet 1 on your data services' usages as well. Select the usage of the data service and check that the runtime provider is set properly
3. remove any unused service in your DC (this is a good practive regardless of the current problem. To view your data services in a certain DC open the "Manage Models Dialog". Select the "Data Services" entry in the filter dropdown on the top right corner. Drill down into the DC you are clearing and delete services you do not think they are in use. Please note that removing a service must be done carefully since you might delete services that could be in use by other models in the same DC or by dynamic entry list of a control in your model, etc.)
Please let me know if it helped
Guy

Error while compiling the composite through custom ant script

Hi,
I am getting the following error while compiling the composite through custom built ant scripts which are intern call the ant-sca-package.xml. And the composite is created by upgrading the 10g bpels. But the same composite is successfully compiling from Jdeveloper (11.1.1.4).
oad of wsdl "oramds:/soa/shared/workflow/NotificationService.wsdl" failed
oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/NotificationService.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:555)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:417)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:241)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:304)
     at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
     ... 9 more
Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
And in the following blog, its recommended to check for the adf-config.xml. But when upgrading the bpels from 10g to 11.1.1.4, I don't see any such file created by Jdeveloper.
http://orasoa.blogspot.com/2010/08/ant-and-mds-composite-compile-error.html
Not sure if I am missing some properties to add in by custom script while compiling.
Thanks
Sree
Edited by: Sree on Jul 4, 2011 7:25 AM

Hi Hussain,
Thanks for the reply.
Were you able to compile the form at the client side successfully?
1) Were you able to compile the form at the client side successfully?:
Ans: Yes, I was able to compile the form successfully at client side.
2) Are you logged in as applmgr user? Have you sourced the application env file before compiling the form?
Ans: No, I have not logged by applmgr user, i am using my own login. Yes I have sourced the application env file before compiling the form
3) What does "echo $FORMS_PATH" return?
Ans: echo $FORMS_PATH on server gives this path
/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource:/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource/stub
Can you please advise?
Thanks,

Using Vi server in real time application

HI
I am using PXIe( 4330, 6363 and 4353) devices and I want to have executable file for the calibration program ( AI,AO verification procedure and so on). So I think is necessary to have 2 programs for each 'verification procedure', one under host (executable file) and one under target (real time application). in host program (exe file) I used VI server to call Real time application. There are some problems that I am phasing.
First I can’t select the channels which the reason is abvious because my host program is under my computer not under target, but I do not know what is the solution?
and second is, error number 7 occurred. which says : the path file is not correct , or the file is removed...
As I mentioned my goal is to have an executable file which contains Real Time application. Please specify If there are other ways to do that. I do not know wether the way I am doing is correct or is somethig impossible ?!!!!!!!
Attachments:
Analog input verification.png ‏158 KB
AnalogInputFrontPannel.png ‏181 KB
Error 7.png ‏148 KB

Hi
there is no specific reason why I call vi dynamically, as I said I try to generate executable file which contains real time application, but before that I need to run host vi too see if it works or not. I did what you advised and I have same error still. I think there must be something wrong with path address and vi server, but I address .rtexe file or target vi to my host and for both I have error.
I have attached the projects here.and I have followed this example :
http://digital.ni.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170
BTW , are there some special configuration for Real time application that I might missed ?
thanks
Attachments:
PXIe-6363.zip ‏306 KB

Error while compiling SOA composite using Jdeveloper

Hi,
I am getting below given error while compiling the SOA composite using Jdeveloper..
I m referring this PDF to develop a custom workflow.
http://st-curriculum.oracle.com/obe/fmw/oim/oim_11g/developing_oim_custom_approval_process_for_self_registration/developing_oim_custom_approval_process_for_self_registration.pdf
Error(45,34): Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "ApprovalProcess" of composite "default/SelfRegistrationApproval!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Can u please let me know what am I missing here.
Regards,
Ab

Hi,
If u have any custom jars..make sure to add them at SCA-INF/lib directory.
Thanks,

CRIO: error while compiling real-time application

Similar Messages

Maybe you are looking for