CRIO multiple Hosts

Hi all,
is it possible to have a crio target running a central VI which exchanges data with host VIs running on different hosts?
Thanks a lot,
Harry
Solved!
Go to Solution.

Hi Chris,
thanks for the reply.. I do not need lossless comms so I guess the shared variables option should be suitable. But what exactly do you mean?
I created a project and then within it a library containing a set of shared variables in my project (under the cRIO target). I then built several host VIs, each sharing some or all of these variables with the cRIO target.. I, obviously, can run host VI (A) from PC (A). However, with host VI (A) running, when I open the project in PC (B) and try to run host VI (B) from it, I get an error message saying
"Access denied: This target is already in use by another project or host computer."
Obviously the way I have defined my shared variables is incorrect, but why??
I have attached a snapshot of my project..
Thanks a lot for your time
Harry
Attachments:
snapshot.JPG ‏128 KB

Similar Messages

Can multiple hosts exist on single instance

Hi B2B gurus,
I would like to present a scenario i am trying to work out.
Lets say there are 2 buyers B1 and B2
And 2 suppliers S1 and S2.
The buyers send a PO to the supplier and the lets say the Supplier sends an Invoice to the Buyer.
Also there are 8 agreements in all. I mean all possible combinations such that a buyer can send a PO to any supplier and a Supplier can send a invoice to any Buyer.
My understanding of B2B is that it is generally a single Host TP and there can be multiple remote TP's.
To make my scenario work we will need multiple host TP's. One solution for this is to install N instances of B2B. But that is not feasible.
So is it possible to install only one instance of B2B and create multiple Host TP's and multiple agreements as i wanted.
We can use an API or something similar for this, so that this can all be done through the backend.
I agree that this may seem a little confusing, so if you have any queries feel free to ask them
Thanks
Ravi
Edited by: Ravi R on Apr 27, 2009 4:47 PM

I did read the two forums you have mentioned, from this my understanding is the following.
Without tweaking the current B2B sytem i can have one TP send multiple format documents to multiple TP's without any problems.
Eg B1 can send to S1 a PO over email . B1 can also send a Change Order to S1 via AS2/FTP?any other method.
Is my understanding correct??
So if i were to use the hub model as you suggested i will use different identifiers to identify multiple buyer TP's
And hence there will be lotsa agreements all on the basis of identifiers and doc received and that will decide the target doc format and the transport delivery method.
Qn 1 - Does this seem to make sense? (feasibility, possible issues )
Qn 2 - What will be the performance consideration? Is there any performacne guide or so ??
Edited by: Ravi R on Apr 28, 2009 11:53 AM

Multiple host adapter framework caches in PI 7.1

When I go look at the caches in my PI system, I get multiple host adapter framework caches. That is, when I navigate to http/<host>:50000/dir, then select "Administration" in the upper right hand corner, and then select "Data Cache Overview" I see the following:
af.<sid1>.<hostname1>
af.<sid2>.<hostname2>
Integration server (ABAP) --> this is fine
Mapping Runtime Java --> points to <hostname1>
Mapping Runtime Java --> points to <hostname2>
I just did a system copy (export/import) and I changed all of the parameters. Unfortunately, not soon enough.
Any help is appreciated...

Dumb question:
Do you delete the integration server under the SLD technical systems? That is, "Integration Directory, Adapter Engine, Integration Repository, and RWB (these are all that shows up). If I delete the adapter engine there (it is assigned to the wrong domain), is that the right way?
Or do you do it in the "CIM Instances" --> Class --> XI Adapter Framework (3) entry for the wrong server domain?

Multiple host-addresses

How can you declare multiple host-address and/or host-range elements in tangosol-coherence-override.xml?
<coherence><cluster-config><authorized-hosts>
<host-address>dnucacheclient1.sybase.com</fhost-address>
<host-address>dnucacheclient2.sybase.com</host-address>
</authorized-hosts></cluster-config></coherence>
Error:
2006-12-15 09:28:15.511 Tangosol Coherence AE 3.2/363 (RC2) <Info> (thread=main,member=n/a): Loaded operational overrides from resource "file:/C:/dscache/tangosol-coherence-override.xml"
2006-12-15 09:28:15.527 Tangosol Coherence AE 3.2/363 (RC2) <Error> (thread=main, member=n/a): Failed to apply the element override: /tangosol-coherence-override-dev.xml; java.lang.UnsupportedOperationException: Override element is not unique:
<host-address>dnucacheclient1.sybase.com</host-address>
How can you allow separate clusters to start on the same subnet? And how do you start a separate cluster on the same subnet, if a running cluster has an authorization restriction?
Error:
2006-12-18 13:09:22.629 Tangosol Coherence DGE 3.2/363 (RC2) <Error> (thread=Cluster, member=n/a): This member is not authorized to join the cluster. Rejected by Member(Id=1, Timestamp=2006-12-18 13:08:33.279, Address=10.20.17.122:8088, MachineId=3962).
Exception in thread "main" java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:61)

You can try something like this,
<authorized-hosts>
<host-address id="1" system-property="tangosol.coherence.authorized.host.1"></host-address>
<host-address id="2" system-property="tangosol.coherence.authorized.host.2"></host-address>
<host-address id="3" system-property="tangosol.coherence.authorized.host.3"></host-address>
<host-address id="4" system-property="tangosol.coherence.authorized.host.4"></host-address>
<host-address id="5" system-property="tangosol.coherence.authorized.host.5"></host-address>
</authorized-hosts>
Thanks
Prabhakar

Pro's and Con's if i run multiple host firmware packages in the single chassis

hi
i would like to know pro's and Con's if i run multiple host firmware packages in the single chassis.
Like if my UCS is running with firmware of 1.4.1m ( having backup of 1.3.1 and 1.1.1j) with 3 blades in one chassis
can i assign service-profiles having three different host firmware versions
Server1 - host firmware 1.1.1j-- win2k8
server2 -host firmware 1.4.1m -- RHEL 5.6 ( OS)
server -host firmware 1.3.1 -(esxi 4.0)
Thanks in advance ,please replay if can i go ahead with this . ASAP

Yes, you can package them together.
Now Cisco has a better way. Cisco UCS Manager provides two main advantages over past firmware provisioning:
• The capability to group multiple firmware components together in one package
• The capability to apply a firmware package to any compatible server in a single operation
Cisco UCS Manager provides an accurate, easier, faster, more flexible, and centralized solution for managing firmware across the entire hardware stack. Service profiles in Cisco UCS Manager abstract the physical hardware from its software properties. Service profiles allow administrators to associate any compatible firmware with any component of the hardware stack. Simply download the firmware versions needed from Cisco and then, within minutes, totally provision firmware on components within the server, fabric interconnect, and fabric extender based on required network, server, and storage policies per application and operating system.
here is the document
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-588010_ps10279_Products_White_Paper.html

Send a file to multiple hosts

Hello
I'm making a program which purpose is to do file system synchro from a reference host to multiple hosts (let's say 10 to 20 for instance).
That means that I will have to send the same file data to all of these.
All hosts are in the same private network.
The files I send could be big so I'm trying to optimize all this. That's why I'm thinking of UDP multicast to do this rather than TCP/IP sockets. However multicast is not that reliable as said in Custom Networking tutorial. So I may have to write a quite complex protocol to achive this.
So what do you think is the best solution ?
Thanks for your advice

Thanks for your advice.
My problem is that I have to spare bandwidth so I should not send the same file multiple times. A TCP connexion would. That's why I chose UDP.
I've got another question about UPD :
Let's say I'm transfering a huge file between server A and server B using UDP. Server A reads the file, splits it into datagrams then sends the packets to B. Now if A is much quicker than B, A will send datagrams quicker than B can process them. Couldn't there be some kind of overflow on B socket ? What will happend ? Packet loss ?
I guess I should make some kind of synchro to avoid this.

Multiple hosts in tcp.invited_nodes

Hello all!
Can I add multiple hosts in tcp.invited_nodes parameter in sqlnet.ora using network mask, i.e tcp.invited_nodes=(192.168.77.0/24)?
toms

i.e tcp.invited_nodes=(192.168.77.0/24)?i think u want to specify the range of following ip. but for that u have to put each and every ip on following parameter.
http://download-west.oracle.com/docs/cd/B14117_01/network.101/b10776/sqlnet.htm#sthref578
Kuljeet

Script to ping multiple hosts and return domain info to a txt or csv file

Hi,
I wonder if anyone can help. I need a script that will allow me to ping multiple hosts (all listed on seperate lines in a txt file) and return IP, server up\down and domain info to a txt or ideally a csv file.
I'm sure this must have been done\requested before but I can't seem to find the correct script anywhere
Thanks for your help
Mal

Try this modification:
$result=@()
Get-Content p:\list.TXT | %{
$start_name = $_
$conn = Test-Connection -ComputerName $_ -Quiet
if(-not $conn)
$start_name = ""
Try
$dns = [System.Net.Dns]::GetHostEntry($_)
$dns_host = $dns.HostName
$dns_ip = $dns.AddressList | select -ExpandProperty IPAddressToString
catch
$dns_host = "invalid host name" #as jrich proposed :)
$dns_ip = "invalid host name" #as jrich proposed :)
$start_name = ""
$HostObj = New-Object PSObject -Property @{
Host = $start_name
IP = $dns_ip
DNSHost = $dns_host
Active = $conn
$result += $HostObj
$result | Export-Csv p:list.csv -NoTypeInformation

Download simultaneously from multiple host

download simultaneously from multiple host in a peer to peer file sharing system organised in an intranet.....the code is in java

well my question is that i hv a p2p built for an intranet and i am encounterin a problem when i need to dwnld a file havin multi instances and iterated amng various clients...and i want to dwnld this file from all the clients simultaneously...i.e., the working of downld accelearator.....

Invalidation and multiple hosts.....

Is it possilbe to configure web cache invalidation across multiple hosts?
Here is our situation:
1. We have many distinct sites with distinct virtual hosts that are publically available... For example: http://myPublicSite1.foo.com/ and http://myPublicSite2.foo.com/
2. For purposes of security, all our content managers are forced to access these sites to manage their content via an internal url that is only accessilble on our network... For example: http://myInternal.foo.com/
Our problem is that when edits are made via the internal url, the external sites are not updated with the most recent content.
We assume this is because invalidation is host based.
Any suggestions as to how we can serve up the most recent content on both hosts?
Thanks in advance for any help offered......

Hi thanks for your responses...
We have a single mid-tier set with many access URL's ....
We have one single "inside URL" which is used for all content management of the many public URLS...
We have multiple "outside/public" URLs....
I am double checking our site aliases further, but at first glance all looks to be configured correctly....
Thanks again for your replies....
Message was edited by:
I_LOVE_PORTAL

Security Error : Multiple hosts referenced in resources

Hi,
Im attempting to use the abbot maven plugin that can download an application via webstart and run GUI tests against it.
I have got this working before, and am setting it up again, but get a webstart error that I have not seen before/can see in the forums.
Title: SystemTest1
Vendor: mycompany, inc.
Category: Security Error
Multiple hosts referenced in resources
JNLPException[category: Security Error : Exception: null : LaunchDesc: null ] at com.sun.javaws.LaunchDownload.checkJNLPSecurity(Unknown Source) at com.sun.javaws.Launcher.downloadResources(Unknown Source) at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source) at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source) at com.sun.javaws.Launcher.run(Unknown Source) at java.lang.Thr
Could anyone shead some light as to where this error comes from/why??
Thanks
James

in any given jnlp file, all the resources must be downloaded from the same download host. In this way the SecurityManager can assign one permission collection to all the code loaded from that jnlp file (allowing socket permission only to that host).
If you have a jnl;p file with multiple resources loaded from differant hosts, re-factor the jnlp file so all of the resources loaded from a seperate host are in one component extension jnlp file.
/Andy

CSA 6.0 Install on image / push to multiple hosts

Does anyone know if you can install CSA on a image and the push it to multiple hosts without issue? Im concerned that they my be (1) seen as the orignal parent-host or (2) not register with CSA-MC correctly.

We've done it successfully with 5.2 by not allowing it to register with the MC prior to creating the image.
We also sysprep the images before they roll out.
It is supposed to re-register if you change the NetBIOS name and it has done this successfully.
There may be other issues but we haven't seen them.
Tom

Crio to host multiple remote front panels

Hello all,
I've a question abt remote front panel hosted by a cRIO system (cRIO9068 to be more specific, running RTOS).
I have a top level VI (main) as the start up vi in my cRIO system, and it would call a subvi during run. I'd like to enable remote front panel for both the main vi and the sub vi so that I can see both front panels using a web browser. I'm not sure if such a configuration is possible at all and would like to listen to comments by users who have similar experiences.
Thank you very much!
Best,
Jidong

Hello hhaamm,
To the best of my knowledge, I don't believe it is possible to host multiple remote front panels from the same executable, and, if it is, would be very difficult. The NI Web Server configuration file only specifies one port on which an executable can run web services, like remote front panels. In, short, I am not sure how you would be able to accomplish this.
Another thing to keep in mind is that what you want to accomplish can be done in many different ways that would be much easier than creating multiple remote front panels.
One of these is to move all of your controls and indicators to the top level VI. i.e. make the data you want to see from the sub-VI an output of the sub-VI and create a new indicator for this on your top-level front panel. This way you can still use a remote front panel and can use different decorations and labels to separate the top-level and sub-VI outputs.
Another way to do this is to use the tab control to create multiple tabs, one for your top-level indicators, and one for your sub-VI indicators. This would still enable you to use remote front panels and would allow for the separation of your different indicators. Here is a note on how to do that:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/creating_tab_controls/
And here is a more in-depth forum post on how to create them:
https://forums.ni.com/t5/LabVIEW/how-do-you-create-tabs-on-the-front-panel/td-p/201495
The final way I can think how you would accomplish this is to use a web service instead of remote front panels and host the output of the sub-VI as a separate website.
Hope this helps!
Collin D.
Applications Engineer
National Instruments

Crio multiple fpga vi

Hi,
I have constructed two fpga vi's for cRIO FPGA and tried to run them parallel in a host vi but when I run the host vi then the fpga vi's did not work properly.
I attach the vi's. What is the problem with these codes?
Attachments:
trigger.vi ‏57 KB
host.vi ‏375 KB
fpga1.vi ‏46 KB

Hi,
Unfortunately for you, this thread is correct and you can only have 1 LabVIEW FPGA VI running at a time.
However, here are some tips that may help you out:
It is possible to load different FPGA personalities during run time. Therefore, if you can separate your application into two different applications, you can load them on the FPGA while it is running ( only takes about 1 second to switch the FPGA to another personality)
Instead of putting the multiple FPGA VIs into a top level VI, have you tried to copy the block diagram from one into the other? In other words, combine them into a single VI with multiple parallel loops?
If you are having trouble with space on the FPGA after combining the FPGA block diagrams into one there are many documents online that will help you optimize the FPGA VI. For Example
Combine boolean indicators into a single U32( will save a significant amount of space)
Reduce the usage of arrays on your FPGA VI ( if you have them). There are other methods of storing this data such as a FIFO or the memory on the FPGA
Since you are using the digital only board and if memory serves me right, you can read the port instead of each boolean individually. This would save you some diagram space as well as some FPGA space.
Last but not least, consider contacting a systems integrator to assit with the development of your FPGA VI or the system as a whole. I know of one that does great work with FPGA's: www.viengineering.com .
Mike
V I Engineering

FTP from cRIO to host PC not working

Hello,
I have a VI that writes files to my cRIO 9074. I then need to get those files onto my PC. I want to do this running on cRIO (as opposed to from my computer) so that I can have a 'export file' button in the VI. I'm therefore using the 'Put File' FTP function, and have set up FileZilla as the FTP server on my PC, as delineated here: http://digital.ni.com/public.nsf/allkb/9A004CF5241F3CB68625779E004EE159
However, the file does not copy and I get an error message.
Details and annotated screen captures below.
Thank you for your help!
Elizabeth
I can do the reverse (running VI on computer, get or put files from/to the cRIO). However, I'd like to run this from the cRIO
If there's a way to call a VI on the computer from a VI running on the cRIO, that's also an acceptable solution
I can tell the cRIO is connected because I can access it via FTP from my computer
I've set up the FTP server with the default server (127.0.0.1), and user LABVIEW with the appropriate home directory etc., with read/write permissions
In the Put FIle VI, I have the host set as my computer's IP address, and the user again as LABVIEW
The error code I get is Error 1: TCP Write in NI_InternetTK_FTP_VIs.lvlib:FTP Command.vi:6->NI_InternetTK_FTP_VIs.lvlib:FTP [QUIT].vi->NI_InternetTK_FTP_VIs.lvlib:FTP Close Session.vi:3->NI_InternetTK_FTP_VIs.lvlib:FTP Put Multiple Files and Buffers.vi:2->NI_InternetTK_FTP_VIs.lvlib:FTP Put File.vi:1->RIO_FileExport.vi
Attachments:
cRIO File Export FTP.jpg ‏310 KB

Just a guess but try changing the active/passive setting. Have you tried FTPing to the PC from another PC? Does that work?
CLA, LabVIEW Versions 2010-2013

CRIO multiple Hosts

Similar Messages

Maybe you are looking for