Cristal reports 2008 vs and deploying

hi
i m trying to create a deploy for my application but i can't build it.
i get the following error:
The install location for prerequisites has not been set to 'component vendor's web site' and the file 'CrystalReports 12.0\CRRuntime_12_2_mlb.msi' in item 'Crystal Reports 2008' can not be located on disk
i need to build a solution the deploies from disk and not web site
i red some of the solutions hear but non of thrm worked for me
please help
Eng. Aviv eyal

Hi,
For VS 2005 you have to copy the files of the ClickOnce Package into
C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\BootStrapper\Packages\CrystalReports 12.0
You can find the package in http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Bye

Similar Messages

Crystal Report 2008 SP3 and BO XI 3.1 conflict

Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______T

Hi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts

Crystal Reports 2008 - Eclipse and JNDI connection.

I am evaluting Crystal Reports 2008 .
I want to use JNDI connection that is defined within my app server by Crystal reports so that I'll have better control of the properties defined.
How do I set up JNDI data source connection in Crystal Reports 2008 ?
I defined the following parameters u2026
                JNDI Provider URL : jnp://localhost:1099
                Initla Context as : org.jnp.interfaces.NamingContextFactory
And user name / password as defined in JBoss setup
I also have u201Cjboss\client\jbossall-client.jaru201D in the classpath .
But I am getting Cannot instantiate class exception .
Thanks in Advance for the help.

Mr. Ted, We can expose JNDI connections from the appserver. Infact the database connection pool resoures are exposed as JNDI resources, JMS factory and connections are exposed as JNDI etc.
In fact, JNDI is a means of securely exposing the resources managed by the app server to be used by trusted clients.
We have achieved this on weblogic (8.1 - JDK 1.4.2) but we would like to replicate the same in glassfish app server ver 3.1.2 and would require the proper factory placed inside the rpt as well as the CRConfig.xml.
Otherwise, (if we are using conventional URL string) when we ship the rpt files, we need to place this only as localhost. This mandates the presence of rpt files to be in the same server as database server and database. We want to avaoid this by creating a JNDI and use that database access resource inside the rpt files.

Crystal Reports 2008 - automation and scheduling

Hey there Crystal Reports experts... please answer this question:
I've been evaluating the Crystal Reports 2008 package (client package) and have been able to generate some nice summary reports form our SQL database using summary pages which have multiple (up to 4) embedded sub-reports in them. I think it's doing what I need it to, but my next hurdle is to automate the summary report for 100+ different customers of ours. The criteria which changes for each customer is a table value in each subreport as well as the date range for the data on the report. I also need to have the title in the report header of each customer, change to reflect the different customer name and date range.
Is there a way to automate this with the standard Crystal Reports 2008 version? I've found a few 3rd party applications online that take care of the Crystal Report automation and scheduling as well as conditional data selection at the same time... is that what I need to use if we don't have ther server version of Crystal, or can I automate it using just the standard 2008 client version??

Hi,
Yes, you need the CR 2008 client license to create the reports and then the server license to distribute the reports.
CR Server 2008 is a single server reporting solution for distributing Crystal Reports only. BOE is a full BI server that can be scaled beyond a single server solution. In addition to just reporting it has other capabilities such as ad hoc query and analysis, dashboarding/scorecarding, etc.
CR Server 2008 currently does not include the "Publishing" functionality yet. Therefore, if you schedule the report to email, all users will see the exact same report. BOE XI 3.1 does have "Publishing" which lets you burst the report so that through a single schedule, each user only sees their slice of the data for that report. You can still use CR Server to accomplish something similar, but it would require you to setup an individual schedule per every customer where each schedule is configured to only return the appropriate data for that customer. This would require a little more effort to setup and maintain.

Crystal Reports 2008 Server and MySQL DataBase source for reports

Hello,
I am having an issue with crystal reports server 2008. I have created a report on my local machine with crystal reports and the datasource is a ODBC connection to a MySQL database.
The report works fine on my local. if i publish to the Crystal Reports Server, i get an error when i try and run the report.
"error Failed to open the connection. "
I have gone into the database connections for this report and put in the connection details. I have also created a ODBC connection on the server in windows to the actual database (installed both the 32bit and 64bit ODBC drivers, both Test succesfully). But when i go into crystal no matter what settings i try it will not work.
anyone have any ideas?
kthank you

I have solved the issues. This may be usefull for anyone ...
1. Make sure on the developer machine you have your ODBC connection setup under the System DNS setting in windows.
2. On the Crystal Report Server, the exact same setup must be done under System DNS, same name, etc
Once this was done, everything was fixed.

Crystal Report 2008 V12 and Crystal Report in VS2008 problem

I have made Crystal report Application using VS2008
Since it has Crystal Report V 10.5 it is raising error as For SAP CR2008 V12
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
   at Test.FrmPurchaseDetail.button1_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
Test
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Default%20Company%20Name/Setup1/Test.exe
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
BLL
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/Default%20Company%20Name/Setup1/BLL.DLL
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_64/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
How to Solve this Problem
How to use Crystal Report Viewer Version 12 instead of Crystal Report Version10 in Vs2008

see this post:
Can CR2008 be used with VB6 ?
COM is a deprecated technology. Became deprecated along with Vb 6 not being supported by MS.
Thus .NET or Java are your solutions at this time.
Ludek

Display image in forms & reports developed on windows and deployed on Unix

Hi,
We are upgrading from Forms and reports 6i to forms10g.
We need to insert image in forms and reports. Recompile and deploy on unix server.
So can anyone let me know the exact steps to create jar file containing images, where to place the jar file.
Corresponding folder, file and configuration changes required on windows and unix.
Av.

Hi Frank,
thanks for the link it helped me in understanding how images work for forms.
But my real concern is how this will work in reports?
As we dont have any reportsweb.cfg nor any java path for reports?
Can you help me in understanding how to embed image in reports that will be displayed even after porting the report on unix oas.
Regards,
Av.

Customizing ActiveX Viewer for Crystal Reports 2008

Here's the scenario.
We have reports designed in Crystal Reports 2008, that are deployed on Business Objects 3.1 Infoview. All reports have Parameters for users to choose. All reports are expected to refresh on open.Some are dynamic some are standard static ones. There is an application developed in JAVA that is rendering these reports using the ActiveX viewer.
The users are not comfortable with the way reports look in JAVA viewer. Hence the choices are either HTML viewer or ActiveX viewer.
The application achieves this by making OpenDoc call to the report and using
sViewer=actx
as one of the parameters. Here's the issue that we run into. When users land on the parameter screen, the parameter screen alone Pops Up in a new window. Once all the parameter values are entered and the users clicks OK, the window vanishes and actual report is rendered in the original window.
If we use HTML viewer by setting
sViewer=html
The report Parameter screen is rendered in the main window without popping up. However we do not wish to use HTML viewer because, some of the reports are linked to other reports with OpenDoc calls. i. e. Parent report calls child report with a OpenDoc call. In the HTML viewer, when you click on the link to child report, it opens in same window despite setting
sWindow=new
in that opendoc call. Thereby losing parent report and no way to navigate back to it. This problem does not happen in ActivX viewer.There it seems to obey the command to open in new window.
Lastly you can recreate all this behavior by setting your viewer preferences in Info View settings.
So, here's my questions.
1. Should I use the .Net viewer instead of ActiveX Viewer ? If so, where can I find Syntax for the same ?
2. Can someone point me to documentation on the ActiveX Viewer ? Specifically making it not to Pop Up the Parameter Screen ?
3. Should the Java application use a different method other than Open Doc to cal the reports ? If so where can I get the details ?
Apologies for the long post. I tried to anticipate most of the questions that may arise in your mind. Thanks in advance for the time invested.

Thank you Adam for the help.
I already have the Open Document document you mentioned. Can't seem to search for the KB article in Marketplace. No results found.
Just to clarify, I do not want to avoid the Parameter screen. Its the fact that it Pops Up in ActiveX viewer is the issue. The only thing I want in ActiveX viewer is to make that screen appear in main window just like HTML viewer.
I understand that there is no difference as far as opendoc is concerned between .Net or JAVA. I am looking for the SDK behind the viewers themselves.
To my third question, your answer is what I was looking for. But need a bit clarification.
>
Adam Stone wrote:
> If you do not like the functionality that OpenDocument provides, you could use the SDK to view the reports, but you will likely run into the same issue as you are running into when using the html viewer. The only workaround for that is to set a property on the viewer object in the SDK but it will affect all hyperlinks in the report not just a single one.
By setting Property in SDK for the viewer Object, are you referring to Meta Tag encapsulation such as
<a href= http://infoview.server.com/Infoview/opendoc/openDocument.jsp?iDocID=ABZR3Z&sIDType=CUID&&sType=wid&sRefresh=Y&sWindow=new>Report Title</a>
May be I didn't get your point with setting property. I know there is documentation on Viewer SDK. I just can't seem to find it. I hope it would answer the questions.
Edited by: SAMEER UPADHYE on Oct 6, 2010 5:46 PM

Crystal reports 2008 sp3 : An error has occurred while attempting to load t

Hello,
Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it. If there is a better forum for this question, please let me know or feel free to move it.
We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
Our Environment:
Development Computer (32-bit, WinXP)
VS2008 (fully updated, was not installed with its Crystal Reports feature)
Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
Database Server (64-bit)
"SERVER2" is a Microsoft SQL Server 2008 server, fully updated
Web Server (64-bit)
"SERVER3" is a Microsoft Server 2008 R2 Web server.
We have an application that is installed on the Web server and it pulls data from the database server.
The webpages are accessing the database properly. There is a ShowReport.aspx webpage that has the
CrystalReportsViewer on it. We send parameters and logon information to ShowReport.aspx. ShowReport
works properly on our development computer and the report looks good, but it fails on the web server.
We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
Our application pool on the web server for this application is set to 32-bit mode. When I launch the
application, it works properly with the database and displays data on web pages, but when I try to
view a report on ShowReport, I get the following error message:
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required.
According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed. They are both Crystal Reports 2008 and not .NET. CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3. On our development computer, .ENGINE is 12.0.2000.0 and
the same version is on the web server.
So, I am completely at a loss as to why we are encountering this error. Help, Please!!!
Thank you in advance,
Mike

Hi Mike,
Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
Thank you
Don

Crystal Reports 2008 SP1 Install Error 1402 on Vista 64

I just downloaded and tried to install the Crystal Reports 2008 SP1 and when I try to run the setup I get a error 1402, could not open key error and the service pack rolls back. I also tried to reinstall from my original CD and I not get the same error. I have tried to run the install using the run as administrator and with Norton 360 disabled and I still get the error. How do I correct this problem so I can update and correct my version of Crystal Reports 2008 Pro?

Hi David,
The link above seems to only refer to deploying runtime. I suggest you un-install Crystal Reports, go into the registry and delete all of our keys. Assuming you only have CR 2008 installed and the usual warnings about backing up or exporting your registry before making any changes:
HKEY_CURRENT_USER\Software\Business Objects
And
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
And then download a full build of SP1 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100006556612009E/cr2008v1win_rf.exe
Make sure you do have full Admin rights and check with your IT department to confirm they have not modified the local Administrator profile.
SP1 is DEP aware so it's not required to disable it.
Before you do all of the above You may also want to copy the SP to your local PC rather than running it from a network share point. Network delays can also cause issues like this.
Thank you
Don

Crystal Report 2008 SP2 & InfoView: Custom XML Export doesnt work

Hi,
I have created a Crystal Report .rpt and want to use the custom xml export function to output a custom xml file. For that, I created a custom transformation file (xsl) and imported it into the .rpt . On the client machine, if I open the .rpt with Crystal Reports 2008 SP2, and select to export it using the custom xml output, all runs fine. (under SP1, only half the file was created...)
If I upload the .rpt file to Infoview (server-side: BO Enterprise 3.1, SP2 as well) and schedule it, I can select xml, and then my custom xml as output format, but I am getting the error message u201EUngültige Exportoptionen" (="invalid export options"), in the instance history. No output file is created. I use file system as destination. Other output formats like .pdf and .rpt work fine and files are created.
Ideas:
-Are there any more settings needed on the server (e.g.CMC - Crystal Server Jobs, other Processes, ...) so I can schedule the report and successfully create the custom xml format file as output?
-Do I need to upgrade to a specific SP or FP on server-side so everything runs smooth?
Thanks for your help!

Hi Florian,
I'm having the same problem, have you by any chance found a solution?
Gajus.

Crystal Report 2008 - Cross tab in subreport doesn't expand horizontally

Hello,
i'm migrating all my company's reports from crystal report X to crystal report 2008.
And i'm facing the following issue:
when a sub-report contains a cross-tab that is too large for one page, in crystal report X a second horizontal page is generated, but in Crystal report 2008 the second horizontal page is not visible.
Is it a known bug, is there a patch to install?

Hi Abhilash,
thank you for your answer, but this workarround does not works in my case.
My main report is just a container for multiple subreports and some of them contains crosstab that can grow on several pages horizontally and vertically.
For example i have some crosstab that can span on more than 5 pages vertically and on 2 pages horizontally.
I tried to create an empty cross tab that span on 2 horizontal pages in the main report, and to mask it. That works for the first vertical page of the subreport but only for this one. Moreover if the first page of the crosstab contained in the subreport does not span horizontally, this solution create an unwanted empty page.

Crystal Reports 2008 SP3 Additional parameter values are needed

I recently upgraded to Crystal Reports 2008 SP3, and now when I try an export a report from the Crystal Reports Designer, I get the error "Additional parameter values are needed before this report can be saved or viewed with data. Click 'Ok' to enter the missing values or 'Cancel' to proceed without data". I am trying to export the report to Crystal Reports format. The report is getting data from a MS SQL 2005 stored proc. I tried building a new simple report (just took all the fields in the result set and put them in the details section) using the same stored proc, and get the same error when I try to export.
FYI, before I try to export I always preview the data in the report, so the parameters are defiantly set correctly.
This was working correctly in Crystal Reports 2008 SP2.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

No SAP Datasources or SAP Toolbar in Crystal Reports 2008

I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
- SAP GUI for Windows
Release: 710
Build: 1046700
Patch Level: 12
includes the BW 3.5 AddOn and BI 7 AddOn
Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
I have ensured that I have only one instance of SAPLOGON.ini on my PC.
I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
We are on ECC6 and BW 3.5.
I hope someone can help.

Hi Stratos,
Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
cheers,
John

Crystal Report 2008 Server - Windows AD authentication

We have installed Crystal Report 2008 Server and have created Administrator with Enterprise authentication. Using Administrator login, Windows AD-groups were mapped, none of the user from the defined group is able to login using InforView. Created Administrator using Windows-AD authentication, that user to is not able to login.
When tried LDAP authentication and mapped users, it's not working as well.
What needs to be done here? we need to get it done urgently.
Thanks,
Pradnya

I have a Windows 2008 Standard 32bit Server running CRS2008
I performed a default install with ONLY WACS. I have looked through every possible document I could find to get kerberos working and am still having trouble. The specific error I am getting when trying to logon to the CMC is:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
The AD group is mapped, I have followed every Kerberos setup document to the letter and still nada.
Any help would be greatly appreciated.
Chad

Cristal reports 2008 vs and deploying

Similar Messages

Maybe you are looking for