Critical! After O365 E2013 Hybrid enable - external mail receive stops!

Hi everyone.
This is quite critical, as all our organization inbound e-mail has stopped working!
After enabling Hybrid on Exch2013 / O365, All inbound emails from external domains has stopped working!
- Internal e-mails Works fine.
- Sending to external/internal Works fine.
I am seeing the following error in the Exch2013 event logs for every 3 seconds (and it started as emails stopped/the same time hybrid configuration was completed):
Event ID 36869 - Error - Schannel
"The SSL server credential's certificate does not have a private key information property attached to it. This most often occurs when a certificate is backed up incorrectly and then later restored. This message can also indicate a certificate enrollment
failure."
I hope that some of you can be of urgent assitance?
Thank you in advance!

Hi,
What’s the NDR message?
Try removing and reinstalling the certificate on the HUB server for TLS and see whether the issue persists.
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

Send External Mail Through One Exchange Server Only

Hello,
I'm very stuck on something & new to exchange. I have two Exchange Servers:
MAIL1: Windows Server 2003 & Exchange 2007 SP2
MAIL2: Windows Server 2008 R2 & Exchange 2007 SP3
All accounts are going to move eventually to MAIL2. Until then, I would like any external emails sent, to be sent through MAIL1.
So far all all internal mail can be sent & received, and any external mail received. But I cannot send external mail from mailboxes on MAIL2 (just mine on MAIL2 at the minute). MAIL1 works fine for everything.
Can someone kindly explain what I should do to get all external mail sent through MAIL1?
Thanks,
Stacy

Hi Stacy,
We can just remove mail2 server from the mail2's send connector and add mail1 server to it.
Then we can send mails to outside via mail1.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

External Mail Send after forwarding an item in SBWP

Hi ,
My requirement is that there is a Requistion workflow which send a notification in SBWP
to the first approver and tthen to second approver when first one approves the requistion.At
each step a workflow sends a mail to each approveralso.
Sometimes the requisition is forwarded from one user to another from SBWP, and no mail
is send if it is done from SBWP.
Since i am new to workflow , please provide some way by which we can send an external
mail whenever an item is forwarded from SBWP.
Thanks

Hello,
"It seems you want to send work item to both SBWP and external mail box.
To accomplish the same, go to SO16 transaction code.Under the tab Mail sy.grp, choose the radio button "Send to home addresses of users".
That's all.You are done."
The question is about sending mails, not work items.
Setting SO16 by itself does nothing.
Setting SO16 is just one part of getting mails sent to a SAP user to be sent on to an external address.
regards
Rick Bakker
hanabi technology

Can't send smartform to external mail address

Hi, everyone.
Now, after creating some self-defined smartforms, we want to send its
PDF copy to
our external mail address. From this point, I had some try.
Reference to SAP Library, I make a testing program named 'YPDF_TEST'.
However, one exception always exists when running and error message id
is 'XS806' - means
"No delivery to &, invalid recipient address"
I filled the address with following fields.
[ dev_mail_recipient-logsys = 'CLNT600'.
dev_mail_recipient-objtype = 'RECIPIENT'.
dev_mail_recipient-objkey = '[email protected]'. ]
I just can't understand the real reason why it doesn't work.
Through debugging, I found the error occurs when handling the following
codes
in function "SX_ADDRESS_TO_DEVTYPE".
[ swc_create_object o_recipient 'RECIPIENT' recipient_id-objkey.
swc_get_property o_recipient 'CommunicationType' m_recipient-type.
get_property_longvalue o_recipient m_recipient-address. ]
On the current situation, if can't come over this problem,
we may not build the connection and don't provide information in time.
Failed to send, I yet try another function - added the tail but on earthdidn't get it ~~~
Would you give me some hints or advice ?
Any help is appreciated.
====================
<i>REPORT ypdf_test .
DATA: fm_name TYPE rs38l_fnam.
DATA: my_control_pars TYPE ssfctrlop. "for CONTROL_PARAMETERS
DATA: my_output_info TYPE ssfcrescl. "for JOB_OUTPUT_INFO
DATA: output_options TYPE ssfcompop.
DATA: e_devtype TYPE rspoptype.
DATA: gw_lcprint TYPE ziebsflc001.
DATA: bin_file TYPE xstring,
bin_filesize TYPE i,
ndiv TYPE i, offset TYPE i,
nmod TYPE i.
DATA: BEGIN OF bin_table OCCURS 0,
x TYPE xstring,
END OF bin_table.
DATA: lines LIKE tline OCCURS 0.
DATA: dev_mail_sender LIKE swotobjid, "B20K061818
dev_mail_recipient LIKE swotobjid.
DATA: dev_mail_applobj_tab LIKE swotobjid OCCURS 10 WITH HEADER LINE.
DATA: param LIKE itcpp.
my_control_pars-no_dialog = 'X'.
my_control_pars-getotf = 'X'.
Get genereated function name of Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZDEMO_SMART_FORM_PPF'
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
Get Device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = sy-langu
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
e_devtype = e_devtype
EXCEPTIONS
no_language = 1
language_not_installed = 2
no_devtype_found = 3
system_error = 4
OTHERS = 5 .
IF sy-subrc <> 0.
ENDIF.
output_options-tdprinter = e_devtype.
set needed mail option
my_control_pars-device = 'MAIL'.
dev_mail_sender-logsys = 'CLNT600'.
dev_mail_sender-objtype = 'RECIPIENT'.
dev_mail_sender-objkey = 'CHI_DEV03'.
dev_mail_recipient-logsys = 'CLNT600'.
dev_mail_recipient-objtype = 'RECIPIENT'.
dev_mail_recipient-objkey = '[email protected]'.
CALL FUNCTION fm_name
EXPORTING
control_parameters = my_control_pars
mail_recipient = dev_mail_recipient
mail_sender = dev_mail_sender
output_options = output_options
ip_carrid = 'ID'
ip_connid = '8290'
ip_fldate = sy-datum
ip_bookid = '12345678'
ip_customid = '09876521'
ip_luggweight = 90
ip_wunit = 'KG'
ip_smoker = 'X'
IMPORTING
job_output_info = my_output_info
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Another try ***
*DATA: param LIKE itcpp.
*DATA: BEGIN OF off_obj.
INCLUDE STRUCTURE soodk.
*DATA: END OF off_obj,
ok TYPE c,
msgid TYPE symsgid,
msgno TYPE symsgno,
msgv1 TYPE symsgv,
msgv2 TYPE symsgv,
msgv3 TYPE symsgv,
msgv4 TYPE symsgv.
*DATA: dev_mail_applobj_tab LIKE swotobjid OCCURS 10 WITH HEADER LINE.
*CALL FUNCTION 'CONVERT_OTF_AND_MAIL'
EXPORTING
mailoptions = param
mail_sender = dev_mail_sender
mail_recipient = dev_mail_recipient
IMPORTING
office_objid = off_obj
mail_ok = ok
msgno = msgno
msgid = msgid
msgv1 = msgv1
msgv2 = msgv2
msgv3 = msgv3
msgv4 = msgv4
TABLES
mail_application_object_ids = dev_mail_applobj_tab
otf = my_output_info-otfdata.</i>

Hi,
You can follow a different approach. Send the output of the Smartform to the spool.
You have a Function Module to read the spool and convert it to PDF . Then there is one more function module to attach the PDF and send it as a mail.
You need to configure SMTP in Tcode : SCOT.
Search the forum with emailpdfattachment
You have umpteen postings available.
Pls reward if useful.
Regards,
Laxman Nayak

Adding external mail contacts to a distribution group seems to randomly add the user instead of the mail contact

I've added a external mail contact for all my mailbox users because all the users have other jobs and other external email addresses. Since these users don't normally log on to my domain to get email, I need to create a distribution list with all their
external email addresses. I've scripted the creation of all the external mail contacts, from the mailbox users and I use AD's Notes field to contain the users external address. When using add-DistributionGroupMember and supplying the external mail
contact email address as the "-Member" param, about half of the time the users mailbox user gets added to the group instead of the external contact. I don't see any arguments to tell add-DistributionGroupMember to use only mail contacts.
1) I don't even know how it's finding the mailbox user because I'm supplying an external email address which is only in the external mail contact.
2) Some members of the group are correctly added as external contacts, some are mailbox users.
3) I only want the external mail contacts in the group
If it helps, here's the line that I use to add members to the group. I've tried mail enabling the mail contacts, no help...
Add-DistributionGroupMember–identity“AltEveryone”–member(get-QADuser$_.Name).Notes
Thanks for any help.

You should ask questions like this in the Exchange forum. It is not a scripting question but is a product behavior question.
You cannot add an external contact without first creating the contact first.
¯\_(ツ)_/¯

Extra header lines appearing in payload after singning and encrypting in Mail Receiver adapter PI 7.31

Hi,
We have a mail receiver adapter which is sending out a edi payload as attachment to the external receiver.
When we send the normal .edi file it is ok.
But when we sign and encrypt the payload and send it out, the external customer receiver decrypts and validates the message successfully but when their application tries to read the edi payload it finds the extra header lines as below :
content-id:
<[email protected]>
Content-Disposition: attachment; filename=xxxxxxxx.edi Content-Type:
application/xml
At their end, their application (DataPower) expects the first three characters of the payload
(decrypted payload) to be either UNA or UNB.This is how it validates whether the incoming message is an EDI message.
But it encounters the extra MIME headers in the payload.
Therefore it gets rejected by DataPower which thinks the content is an
unknown message type.
How to suppress the header lines appearing in the payload(after decryption and validation).
Thanks,
Guest

hi,
try content-type as "text/xml"

Enable External Load Balancing error

Hello,
I'm trying to create a DirectAccess farm with 2 external Load balancers (Step 3.1.1 http://technet.microsoft.com/en-us/library/jj134166.aspx)
The first server is configured (Behind a Edge with 2 NICs) and working but when trying to enable External Load Balancing, I immediately receive this error when applying the settings:
Initializing operations before applying configuration
Backing up GPOs...
Updating cluster settings
Retrieving server GPO details...
Opening the server GPO...
Error: The configuration data for this product is corrupt. Contact your support personnel.
Finishing operations after applying configuration
Information: Attempting to roll back the configuration...
The DirectAccess dashboard shows that all services are fine, the DC is available and no errors are logged in the Event Viewer.
I can't find any explanation about a possible corrupted configuration.

Ok... Found the problem... You can't mix Internet IP and LAN IP to create the VIP...

External mail using output types in inbound delivery.

Hi Experts,
I want to send an external mail to vendor after creating inbound delivery. for this i want to use only output types in messages. Can somebody help me step-by-step how to configure the output type to send mail to external ID.
Thanks in advance!
Machindra Jogdand

we can have print out from delivery from header output & item output.
ok now for output ypu need to go to T.code: NACE, Take V2 -shipping and click on output types tab at the top most u will get a output type standard "MAIL"
For the MAIL output type u assign a access sequence of your own.
Maintain condition records in VV2.
Select the output type in delivery
GO to Vl02n enter the delivery no: take extras from the menu and take delivery output header /item enter the output type MAIL.

External Mail Flow not coming into Exchange 2013 Server

We just finished migrating from Exchange 2007 to Exchange 2013 and when I disable a certain receive connector on Exchange 2007 we stop receiving external emails. I have reviewed all of the Exchange 2013 Receive Connectors and everything looks to be fine
but the server does not get mail flow. If anyone could assist with this issue that would be great.
Thanks,
Ryan

Hi,
According to your description, all your inbound mails cannot be received in your Exchange 2013 server after you disable a receive connector in your Exchange 2007 server. If I misunderstand your meaning, please feel free to let me know.
If yes, since your MX record has been configured properly for your Exchange 2013 server, we can begin with checking the A record for the Exchange 2013 server and confirm if all external mails cannot come in your organization. And we can depend on the following
troubleshooting to narrow down the mail flow issue:
1. Check the NDR information if there is NDR.
2. Check Telnet to test the mail flow:
http://technet.microsoft.com/en-us/library/bb123686(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

External mail doesn't come in,

Hi, i have a 10.4.3 tiger server running, everythings works fine exept for the mail server.
I can send and receive localy mail, and i can sent mail to external mail servers but i can't recieve mail from external mail servers.
This is the output of postconf:
Poseidon:/var/imap/user/a root# postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 0
mydestination = $myhostname,localhost.$mydomain,localhost,80.126.131.200,10.0.0.180,10.0.0.171, osxy.nl,mail.osxy.nl
mydomain = osxy.nl
mydomain_fallback = localhost
myhostname = osxy.nl
mynetworks = 127.0.0.1/32,10.0.0.0/24,0.0.0.0/0
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = smtp.xs4all.nl
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdpw_server_securityoptions = cram-md5,login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
Hopefully 1 of you guys can help me, because i had it running but after a crash i can't get it running again.

I was able to send mail to your postmaster account...
See below:
Cinema:~ jj$ telnet mail.osxy.nl smtp
Trying 80.126.131.200...
Connected to mail.osxy.nl.
Escape character is '^]'.
mail from: <[email protected]>
220 osxy.nl ESMTP Postfix
250 Ok
rcpt to: <[email protected]>
250 Ok
data
354 End data with <CR><LF>.<CR><LF>
Subject: Test from outside
250 Ok: queued as DC22B33BE7

External Mail's Sending Via Abap Code

<u>Hello, everyone.</u>
I have a problem with an external mail's sending, I have to solve it very quickly.
I'm tring to send mail to a specific address with an attachment but it doesn't work.
Does any one has some source code that works (with file attached) ?
Thanks in advance,
Rebeka

Hi rebeka,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

How to enable push mail for gmail in iphone 6 plus

how to enable push mail for gmail in iphone 6 plus

Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

Setting multiple receipents (external mail adress) of mail step

I have a workflow which is Purchase order Recejted.
I copied it and trying to send mail to multiple external mail adresses.
I created an element in workflow container. SOXNA-FULLNAME (Multiline).
I created the mail step. But I want to write a method to get the receipent mail adresses and pass it to this element and again pass element to mail step.
But I'm not sure where to write the method, I mean is it should be a step including a task etc.
Thanks for any help

Hello Karri,
I did all the steps you told. Here is the screen shot of workflow;
(The last step is PR Rejected - It is Turkish there)
My question is: What should be the Agents of Get Mail Adresses step ? Because it asks one. I write down the WFINITIATOR as Agent of Get Mail Adresses step but the next step is not triggered until I Execute it in SAP INBOX.
Graphical view of progress is like this;
After I execute it ;
And after this nothing happens, no mail sent to anyone.
I dont want any agent in any step I just want to send mail to the mail adresses I give. Can you help me to fix this ?
Thanks.

Enable E-mail functionality for RFQ/PO.

Hi All,
I have a requirement to enable E-mail functionality to send the PO/RFQ output to the Vendor. Whenever we go to the messages in the PO ME22N or ME23N & click on the out message, we should get a pop up asking to enter the E-mail address.
Please let me know what settings do we need to do?
-Muneer.

Hi,
Purchase order via e-mail in SAP system can be done , there are some configurations and pre-requisites to do as follow:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470
Regards,
Biju K

How to send external mails to the user

Dears,
How to send external mails to the user who creates the sales document (Quotation)
Can you please suggest what modification required in the FM
Thanks,
pinky

You can have a partner function like 'Created by' and use an exit to populate the User ID to this partner function(dont have the system right now but i think this can be done with standard partner detr. procedure also)
Then, create an Output type for that Partner function with transmission medium as 'External Send'. You can use the standard SAP program to trigger the email. To send the actual email after the output is trigerred, the link connection has to be set up be BASIS but if you want to check, then goto SOST and see if the email got trigerred or not.

Critical! After O365 E2013 Hybrid enable - external mail receive stops!

Similar Messages

Maybe you are looking for