Critical error when accessing the team calendar

Hi Experts,
Here I am giving the scenario details below.
1) Employee worked under manager A till 1st of July 2009.
2) During that time employee applied for sick leave from 21st July 2009 to 24th July 2009.
3) On 2nd of July 2009 the employee got transferred to some other orgunit lead by some manager say B.
4) Manager A approved his sick leave after 2nd of July 2009.
5) When manager A was trying to access his team calendar for the month of July 2009, he is getting the critical error saying that NO Read Authorization for the infotype 2001 and subtype 0111 for that particular employee.
6) Manager B was able to access the team calendar for the month July 2009.
So now the employee is moved to new orgunit. So old manager is getting the authorization error for infotype 2001.
I spoke to security folks about this. They told me to find out user exit or BADI to bypass the structural authorization.
Pls let me know how to avoid this issue.
Regards,
Velangini Bandanadham

The employee can request deletion of this approved leave, and apply the leave again with his current manager as approver.
Try this out, if helps

Similar Messages

403 Error when accessing the server

Hi,
I have successfully installed the ABAP WebAS Preview. All the processes start but when I try to access the server on port 8000 or 8100, I got this error message :
Service cannot be reached
What has happened?
URL http://192.168.0.2:8000/ call was terminated because the corresponding service is not available.
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:blackbox_NSP_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
I'm connected to a modem-router at home which behaves as a DHCP server.
I thought it was due to the fact I didn't have a full domain name in my computer name. I have tried to enter LOCALHOST and port 8000 in SE80>Utilities>Settings>Business Server Pages. No way ! Same error.
Thanks in advance for your help.
BTW I'd like to play with BSPs, where should I go to find some code examples ?

this is probably because ICM may not be running. check it thru transaction SMICM and also check in transaction SICF whether the services are active.
try to ping the system using
http://server.xxx.om:port/sap/bc/ping
as far BSP samples and tutorial.
BSP weblogs here at SDN
http://scn.sap.com/community/abap/bsp/content?filterID=content~objecttype~objecttype[blogpost]
and tutorial at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
also check out
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
Regards
Raja

SunCluster 3.2 - Error when accessing the SC management console

Hi,
I have a SC 3.2 with two nodes. I defined a VIP for the both nodes. When accessing to the Web GUI on the VIP, I cannot access to the Systeme Application. When the 1st node is online, the Systeme management is accessible. When switching to the other node, the Systeme application is node accessible. I have the following error : "No application available". However, when connectin with CLI. It appears that everything is OK. Could you please help me.....
I need to access to the SC application when one or the other node is active....
Thanks for your help.

When checking the /var/log/webconsole/console/console_admin_log file, I have the following error:
bash-3.00# more console_admin_log
# ============================================================
# Console configuration log created on Mon, 5 May 2008, 20:13:08
5-May-2008 | 20:13:11 | INFO | Undeployed web app context "SunClusterManager"
for application SunClusterManager
bash-3.00#
Maybe is it the cause of my problem because the file console_admin_log doesn't exist of the node where it's working....????
Thanks for your help.

Error when accessing the web-based portal for SQL Azure

Hi,
when trying to access SQL azure management portal, the following error is thrown:
[MoreThanOneMatch]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=System.Core.dll&Key=MoreThanOneMatch -
Looking at the site in question, the problem seems to be Silverlight related. However, I am unable to debug as suggested since the server is located on Microsoft premises. To rule out a wrong password, I did a reset and ruled out typos by copying username
and password into the field. Furthermore since its not a production database, all IPv4 addresses (range 0.0.0.0-255.255.255.255) are allowed to access the database, so the problem should not be related to ip-based access restrictions. Is this a bug
in the web interface or is the problem sitting in front of the screen?
Regards,
Chris

Hello,
I also meet this issue when connect to SQL database without specify database on the login page. But the error disappear when I specify the database name in the database section, for example, master.It may be a bug in Management Portal of SQL Database.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Error when accessing the "Org unit" link from iview "Who's who"

Hi all,
In our ESS/MSS implementation we have come across to a strange error:
In the master iview u201CWhou2019s whou201D when trying to access the link for the org unit we receive the following error:
Service EMPLOYEE_ORGCHART_SERVICE does not exist.
Indeed the respective service does not exists nor the resources. We have ECC 5.0 and EP 7.0. We were unable so far to find the right (or dedicated) resources/services for this.
Any helps are much appreciated.
Thanks,
Eugen

Hi Eugen,
Probably these threads can help you.
Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.
ESS Who's Who - remove link from Org Unit
Good Luck!
Sandeep Tudumu

Page Not Found error when accessing the Identity server console

Hi,
I have installed the Sun One Portal Server.
when i access the URL for Identity server, i am getting Page not Found exception.
Any suggestions, why this problem could occur.
Regards,
Mukta

First the obvious: Restart the Webserver/Application Server
Did you choose "Configure Later"?
Is amconsole/amserver/... really deployed? You can see this in the Admin web interface of the server.
Do you see anything in the logfiles?
Chris

Getting a java error when accessing the /nwa url

Hi.
We've recently updated our netweaver portal and application server from SPS19 to SPS21.
Now we receive an error message when try to open the url http://<server>/nwa. After entering the credentials we get
500 Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/LogonUtils.decryptURL(Ljava/lang/String;)Ljava/lang/String;
Exception id: [000D600ADD7B003400000283000D007A000484CF7CDC6E88]
Any suggestions?
Thanks.
Ralph.

Hi.
The installation worked without any problems. No error messages during the update process.
The default trace gives
application [logon] Processing HTTP request to servlet [LogonServlet] finished with error. The error is: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/LogonUtils.decryptURL(Ljava/lang/String;)Ljava/lang/String;
at com.sap.security.core.logonadmin.ServletAccessToLogic.sendRedirect(ServletAccessToLogic.java:242)
at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:916)
at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Any suggestions on this?
Thanks.
Ralph.

I can't connect to Internet anymore (WIFI or Ethernet). This was working perfectly before. I don't get a proper IP address from my ADSL box and it seems there is a DNS error when accessing the Internet.

I have an issue with my MacBook pro (MAC OS X 10.8.3) when trying to access Internet. I am behind an ADSL box (Orange). I have a PC on the same LAN which accesses Internet perfectly via the same Box.
On the MAC, I have tried WIFI and Ethernet. And have same issue on both. I have checked the IP address (the ADSL box is a DHCP server) but the MAC doesn't get a proper IP and network mask I tried a manual IP address setup and it doesn't get better. I have setup the DNS servers for my Internet provider, but I get DNS error. I have tried 2 Internet browsers (Chrome and Safari), both have the same issue.
I tried to put my MAC on a different ADSL box (I have 2 acccesses with 2 providers at home) and get the same issue.
I also noticed a havy CPU load on the mDNSResponder process (at least 30%). I have restarted it, but no improvement.
Last, I have repared the permissions.
From those trials, it seems that the problem is on the Mac side. But I am completelly without any new idea, so I need help
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Get an error when accessing the entry from the Backing Map directly

We are using some sample code from Oracle to access Objects associated via KeyAssociation directly from the Backing Map.
Occasionally we get the error posted below. Can someone shed light on what this error means ?
I'm doing a Get on the Backing Map directly.
Thanks,
J
An entry was inserted into the backing map for the partitioned cache "Customerl" that is not owned by this member; the entry will be removed.
ReadWriteBackingMap$5{ReadWriteBackingMap inserted: key=Binary(length=75, value=0x---binary key data removed ----), value=Binary(length=691, value=0x---binary value data removed---)), synthetic}
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.onBackingMapEvent(DistributedCache.CDB:152)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage$PrimaryListener.entryInserted(DistributedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:191)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:164)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
     at com.tangosol.net.cache.ReadWriteBackingMap$InternalMapListener.dispatch(ReadWriteBackingMap.java:2064)
     at com.tangosol.net.cache.ReadWriteBackingMap$InternalMapListener.entryInserted(ReadWriteBackingMap.java:1903)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:191)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:164)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
     at com.tangosol.net.cache.OldCache.dispatchEvent(OldCache.java:1718)
     at com.tangosol.net.cache.OldCache$Entry.onAdd(OldCache.java:1786)
     at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
     at com.tangosol.net.cache.OldCache.put(OldCache.java:253)
     at com.tangosol.net.cache.OldCache.put(OldCache.java:221)
     at com.tangosol.net.cache.ReadWriteBackingMap.get(ReadWriteBackingMap.java:721)
     at

Here is the sample we adapted. We have adapted the code below to our specific Cache. I have highlighted the line that throws the exception, this exception doesnt occur all the time, saw it about 10 times yesterday and 2 times today.
import com.tangosol.net.BackingMapManagerContext;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.CacheService;
import com.tangosol.net.DefaultConfigurableCacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.util.Binary;
import com.tangosol.util.ClassHelper;
import com.tangosol.util.InvocableMap;
import com.tangosol.util.processor.AbstractProcessor;
import java.io.Serializable;
import java.util.Map;
* dimitri
public class Main extends AbstractProcessor
public static class Foo implements Serializable
String m_sFoo;
public String getFoo()
return m_sFoo;
public void setFoo(String sFoo)
m_sFoo = sFoo;
public String toString()
return "Foo[foo=" + m_sFoo + "]";
public static class Bar implements Serializable
String m_sBar;
public String getBar()
return m_sBar;
public void setBar(String sBar)
m_sBar = sBar;
public String toString()
return "Bar[bar=" + m_sBar + "]";
public Object process(InvocableMap.Entry entry)
try
// We are invoked on foo - update it.
Foo foo = (Foo) entry.getValue();
foo.setFoo(foo.getFoo() + " updated");
entry.setValue(foo);
// Now update Bar
Object oStorage = ClassHelper.invoke(entry, "getStorage", null);
CacheService service = (CacheService) ClassHelper.invoke(oStorage, "getService", null);
DefaultConfigurableCacheFactory.Manager bmm =
(DefaultConfigurableCacheFactory.Manager) service.getBackingMapManager();
BackingMapManagerContext ctx = bmm.getContext();
Map mapBack = bmm.getBackingMap("bar");
// Assume that the key is still the same - "test"
Binary binKey = (Binary) ctx.getKeyToInternalConverter().convert(entry.getKey());
Binary binValue = (Binary) mapBack.get(binKey);
// convert value from internal and update
Bar bar = (Bar) ctx.getValueFromInternalConverter().convert(binValue);
bar.setBar(bar.getBar() + " updated");
// update backing map
binValue = (Binary) ctx.getValueToInternalConverter().convert(bar);
mapBack.put(binKey, binValue);
catch (Throwable oops)
throw ensureRuntimeException(oops);
return null;
public static void main(String[] asArg)
try
NamedCache cacheFoo = CacheFactory.getCache("foo");
NamedCache cacheBar = CacheFactory.getCache("bar");
Foo foo = new Foo();
foo.setFoo("initial foo");
cacheFoo.put("test", foo);
Bar bar = new Bar();
bar.setBar("initial bar");
cacheBar.put("test", bar);
System.out.println(cacheFoo.get("test"));
System.out.println(cacheBar.get("test"));
cacheFoo.invoke("test", new Main());
System.out.println(cacheFoo.get("test"));
System.out.println(cacheBar.get("test"));
catch (Throwable oops)
err(oops);
finally
CacheFactory.shutdown();
}

I'm having error when accessing the email applicat...

i have a problem of accessing my email address via the nokia app, when ever i try it always says " application not ready ". i did the factory store and device-up date but nothing happend. im using Asha 201
Moderator's note: We amended the title of this post as we moved it to the appropriate board.

There you go …

WWC-51004 error when accessing the portal default page

An unexpected error occurred: User-Defined Exception (WWC-51004)
The specified user does not exist. (WWC-41406)
Unexpected error encountered in wwsec_api.id_sso (User-Defined Exception) (WWC-41417)
The system failed to retrieve the necessary HTTP request to the Login Server to validate this user. (WWC-41447)

Dear Carlos,
we are facing the same problem, how did you solve?
Best Regards,
Enrico
Edited by: venuto on 14-dic-2010 11.39

Getting run time error when accessing the file from frontend server using F4.....?

Category               ABAP Programming Error
Runtime Errors         CONVT_NO_NUMBER
Except.                CX_SY_CONVERSION_NO_NUMBER
ABAP Program           ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time          26.05.2014 14:28:30
Short Text
     "C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
     Error in the ABAP Application Program
     The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
      it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception has occurred which is explained in more detail below. The
     exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
      in procedure
     "%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated this

HI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
         ID(10),
         BLDAT(10),                             " Document Date
         BUDAT(10),                             " Posting Date
         REF_DOC_NO(16),                        " Material Slip No
         DEL_NOTE(16),                          " delivery note
         MATNR TYPE MSEG-MATNR,                 " Material Number
         ERFMG(13) TYPE C,                      " Quantity
         BWART TYPE RM07M-BWARTWA,              " Movement Type
         SOBKZ(1),                              " Special Stock
         WERKS TYPE RM07M-WERKS,                " Plant
         LGORT TYPE RM07M-LGORT,                " Storage Location
         PS_POSID TYPE PS_POSID,                " WBS Element
         COST_CENTER TYPE KOSTL,                " cost center
         ORDER TYPE AUFNR,                      " order number
         SERNR TYPE RIPW0-SERNR,                " Serial Number
        END OF IT_DATA,
        BEGIN OF IT_HEAD OCCURS 0,
          ID(10),
          BLDAT(10),                            " Document Date
          BUDAT(10),                            " Posting Date
          REF_DOC_NO(16),                       " Reference document number
          "HEADER_TXT(25),                       " Header Text
          BWART TYPE RM07M-BWARTWA,             " Movement Type
        END OF IT_HEAD,
        BEGIN OF IT_ITEM OCCURS 0,
          ID(10),
          "ID1(10),
          WERKS TYPE RM07M-WERKS,               " Plant
          LGORT TYPE RM07M-LGORT,               " Storage Location
          VAL_TYPE TYPE BWTAR_D,
          MATNR TYPE MSEG-MATNR,                " Material Number
          ERFMG(13) TYPE C,                     " Quantity
          CHARG TYPE MSEG-CHARG,                " Batch
          BWTAR TYPE BWTAR_D,
          PS_POSID TYPE PS_POSID,                 " WBS Element
          ERFME TYPE MSEG-ERFME,                  " Unit
          COST_CENTER TYPE KOSTL,                " cost center
          ORDER TYPE AUFNR,                      " order number
          CUSTOMER TYPE EKUNN,                    " Account Number of Customer
          SERNR TYPE RIPW0-SERNR,                 " Serial Number
          AMOUNT_LC TYPE BAPI_EXBWR,
          SOBKZ(1),
        END OF IT_ITEM,
          HEADER   LIKE BAPI2017_GM_HEAD_01,
          CODE     LIKE BAPI2017_GM_CODE,
          ITEMS    LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
          SERIAL   LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
          RETURN   LIKE BAPI2017_GM_HEAD_RET,
          RET      LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
          TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
          IT_TAB   TYPE FILETABLE,
          GD_SUBRC TYPE I,
          L_FILE   TYPE RLGRAP-FILENAME,
          IT_RAW   TYPE TRUXS_T_TEXT_DATA,
          COUNT(2) TYPE N,
          TEXT_C(30).
DATA: DATA     LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
*             p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
   CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
     EXPORTING
       WINDOW_TITLE = 'SELECT FILE'
     CHANGING
       FILE_TABLE   = IT_TAB
       RC           = GD_SUBRC.
   READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
   PERFORM GET_EXCEL_DATA.
   PERFORM GET_HEADER_ITEM.
   PERFORM UPDATE_DATA.
*&      Form GET_EXCEL_DATA
*       text
* --> p1        text
* <-- p2        text
FORM GET_EXCEL_DATA .
   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
     EXPORTING
       INPUT = P_FILE
     IMPORTING
       OUTPUT = L_FILE.
   CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
     EXPORTING
       I_LINE_HEADER        = 'X'
       I_TAB_RAW_DATA       = IT_RAW
       I_FILENAME           = L_FILE
     TABLES
       I_TAB_CONVERTED_DATA = IT_DATA
     EXCEPTIONS
       CONVERSION_FAILED    = 1
       OTHERS               = 2.
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
ENDFORM. " GET_EXCEL_DATA
*&      Form GET_HEADER_ITEM
*       text
* --> p1        text
* <-- p2        text
FORM GET_HEADER_ITEM .
   DATA : FLAG(1).
   LOOP AT IT_DATA.
     CLEAR FLAG.
     IF IT_DATA-ID IS NOT INITIAL.
       AT NEW ID.
         FLAG = 'X'.
       ENDAT.
     ENDIF.
     IF FLAG = 'X'.
       MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
       APPEND IT_HEAD.
     ENDIF.
     MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
     APPEND IT_ITEM.
   ENDLOOP.
   DATA[] = IT_ITEM[].
   IT_TEMP[] = IT_ITEM[].
   IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*&      Form UPDATE_DATA
*       text
* --> p1        text
* <-- p2        text
FORM UPDATE_DATA .
   DATA : COUNT1(10),
          L_QTY TYPE I,
          DAT(10).
   CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
   LOOP AT IT_HEAD.
     ON CHANGE OF IT_HEAD-ID.
       CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
         EXPORTING
           DATE_EXTERNAL       = IT_HEAD-BUDAT
           ACCEPT_INITIAL_DATE = 'X'
         IMPORTING
           DATE_INTERNAL       = HEADER-PSTNG_DATE.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
         EXPORTING
           DATE_EXTERNAL       = IT_HEAD-BLDAT
           ACCEPT_INITIAL_DATE = 'X'
         IMPORTING
           DATE_INTERNAL       = HEADER-DOC_DATE.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       MOVE : '2'                TO HEADER-VER_GR_GI_SLIP,
              'X'                TO HEADER-VER_GR_GI_SLIPX.
*      IF r1 EQ 'X'.
       MOVE '05' TO CODE-GM_CODE.
       HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
       "HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
*      ELSEIF r2 EQ 'X'.
*        MOVE '04' TO code-gm_code.
*      ELSEIF r3 EQ 'X'.
*        MOVE '04' TO code-gm_code.
*      ENDIF.
*      IF p_test = 'X'.
*        MOVE 'X' TO testrun.
*      ENDIF.
     ENDON.
     IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
     DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
     LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
*      ON CHANGE OF it_item-id1.
       COUNT1 = COUNT1 + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
           INPUT = IT_ITEM-MATNR
         IMPORTING
           OUTPUT = ITEMS-MATERIAL.
       MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
              IT_ITEM-LGORT TO ITEMS-STGE_LOC,
*             it_item-lgort1 TO items-move_stloc,
              IT_ITEM-CHARG TO ITEMS-BATCH,
*            IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
              'FRESH' TO ITEMS-VAL_TYPE,
              IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
              IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
              IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
              IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
*            it_item-erfme TO items-entry_uom,
*            it_item-sgtxt TO items-item_text,
*            it_item-exbwr TO items-amount_lc,
              IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
              IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
              "IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
              IT_ITEM-ERFMG TO L_QTY,
              IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
              IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
              IT_ITEM-ORDER TO ITEMS-ORDERID.
*             items-SPEC_MVMT = 'R'.
       CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
         EXPORTING
           INPUT = ITEMS-WBS_ELEM
         IMPORTING
           OUTPUT = ITEMS-WBS_ELEM.
       CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
         EXPORTING
           INPUT = ITEMS-VAL_WBS_ELEM
         IMPORTING
           OUTPUT = ITEMS-VAL_WBS_ELEM.
*      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
*        EXPORTING
*          input = it_item-lifnr
*        IMPORTING
*          output = items-vendor.
       APPEND ITEMS.
*      ENDON.
     ENDLOOP.
     DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
     DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
     DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
     DATA: MAT_ITM TYPE MBLPO,
           SERNP TYPE SERAIL.
     MAT_ITM = '0001'.
     LOOP AT IT_TEMP.
       SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
       IF SERNP IS NOT INITIAL.
         LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
*    MOVE : it_item1-id TO serial-matdoc_itm,
*     MOVE : mat_itm TO serial-matdoc_itm,
           SERIAL-MATDOC_ITM = MAT_ITM .
           SERIAL-SERIALNO   = IT_TEMP1-SERNR.
           APPEND SERIAL.
           CLEAR IT_ITEM1.
         ENDLOOP.
         MAT_ITM = MAT_ITM + 1.
       ENDIF.
       CLEAR IT_TEMP.
     ENDLOOP.
     CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
       EXPORTING
         GOODSMVT_HEADER       = HEADER
         GOODSMVT_CODE         = CODE
         TESTRUN               = TESTRUN
*       GOODSMVT_REF_EWM      =
       IMPORTING
         GOODSMVT_HEADRET      = RETURN
*       MATERIALDOCUMENT      =
*       MATDOCUMENTYEAR       =
       TABLES
         GOODSMVT_ITEM         = ITEMS
         GOODSMVT_SERIALNUMBER = SERIAL
         RETURN                = RET
*       GOODSMVT_SERV_PART_DATA =
*       EXTENSIONIN           =
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT = 'X'
*   IMPORTING
*       RETURN        =
     IF NOT RETURN IS INITIAL.
       WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
     ELSE.
       LOOP AT RET.
         WRITE : RET-TYPE,    RET-MESSAGE.
*      log-index = sy-index.
*      log-matnr = header-material.
*      log-message = ret1-message.
*      APPEND log.
       ENDLOOP.
     ENDIF.
     REFRESH : ITEMS,RET.
     CLEAR : HEADER,RETURN.
     CLEAR: TESTRUN ,
            RETURN,
            ITEMS[],
            SERIAL[],
            RET[],
            HEADER,
            IT_TEMP[] ,
            IT_TEMP1[].
     IT_TEMP[] = DATA[].
     IT_TEMP1[] = DATA[].
   ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema

Silverlight error when accessing the Admin Console

Once logged in to Intune, the system overview screen paints and the website freezes. Once the site recovers I get a Fatal Silverlight error at (0,0): 4008. At that point I can do nothing further. I have tried version 4 and 5 of Silverlight
and IE/Firefox browsers with no success. It doesn't matter what PC I try it on either. It seems to be associated with our login. Any assistance/guidance is greatly appreciated!

I've not seen this issue myself but I've heard of it. See here from May 2014 (it's in German - same problem as yours).
http://social.technet.microsoft.com/Forums/en-US/5f2bfe56-65da-4687-b114-912ca00823d5/silverlight-error-4008-in-windows-intune?forum=wintunede
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Get 400 error when accessing the Source from MySite sharepoint 2013

we retrieving the recent news feed from my site .Sometimes we are getting 400 bad request error.we have used rest json method toretrieve the item from my site?any idea to resolve this issue?

I'm not very familiar with Tuxedo unfortunately.
I recommend that you post here:
Could not get TuxedoConnectionFactory, setting up AP's incorrectly?
You could also start with the code here:
Where to Download weblogic.wtc.jatmi Library/Package
And follow the instructions here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13756.pdf

Error when accessing Java and JVM section

I'm getting the following error when accessing the Java and
JVM section of the CF Administrator:
"Element JDKPATH is undefined in FORM"
I've searched a lot and there's very little on the topic. On
this forum there are two posts and one got no answer, on the other
it was suggested it might be the jvm.config file. I've looked at
mine but I really have no idea what could be wrong. Also, there are
two jvm.config files in my install, one in jrun4/bin and another in
jrun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusion/runtime/bin
folder (I did multiserver installation).
I've already tried a bunch of things and no luck, any help is
appreciated on this.

quote:
Originally posted by:
ke4pym
What is your path? Make sure you're using forward slashes.
ie: d:/java/jdk1.6.0_12/bin/blah/blah/blah
What path are your referring to? My actual PATH environment
variable? Or are you referring to something else. Btw, here's what
my config file looks like right now.
# VM configuration
# Where to find JVM, if {java.home}/jre exists then that JVM
is used
# if not then it must be the path to the JRE itself
java.home=C:/JRun4/jre
# If no java.home is specified a VM is located by looking in
these places in this
# order:
# 1) bin directory for java.dll (windows) or
lib/<ARCH>/libjava.so (unix)
# 2) ../jre
# 3) registry (windows only)
# 4) JAVA_HOME env var plus jre (ie $JAVA_HOME/jre)
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=192m -XX:+UseParallelGC
-Dcoldfusion.rootDir={application.home}/
# commas will be converted to platform specific separator and
the result will be passed
# as -Djava.ext.dirs= to the VM
java.ext.dirs={jre.home}/lib/ext
# where to find shared libraries
java.library.path={application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusi on/lib,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusion/jintegra /bin,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusion/jintegra/b in/international
system.path.first=false
# set the current working directory - useful for Windows to
control
# the default search path used when loading DLLs since it
comes
# before system directory, windows directory and PATH
java.user.dir={application.home}/../lib
# JVM classpath
java.class.path={application.home}/servers/lib,{application.home}/lib

Critical error when accessing the team calendar

Similar Messages

Maybe you are looking for