Critical Error with installation

"Critical errors were found in setup
- You cannot install this product because a conflicting
compoent is already installed.
Please see the Setup log file for details."
I guess I have to wipe something from my hard drive but I'm
not sure what. I don't know what they mean by Setup log file so I
don't know how to check that. This error message has been keeping
me from installing Dreamweaver CS3.

I too hit this error.  I have  a customer that has a current 8.6(2) install, and wants to upgrade to 10.5.  We are doing this on a UCS C260 server.
We were attempting to load this on the 10.5 OVA.  After looking over the thread above, I noted the adapter type change made by manuelmtzdominguez.  I started looking at this, and sure enough, the adapter type is seems to be the root cause. 
The OVA for an 8.6 machine uses an adapter type "flexible", but the adapter type on the 10.5 OVA is using VMXNET3.  On the 10.5 OVA, the only available options are VMXNET3 and E1000.  Flexible isn't an option.
In my case, I'm simply going to install it on the 8.6 OVA, and then use Prime Deployment to run the upgrade to 10.5 (to get everything just right). 
Moral of the story is, I guess, check the adapter types since apparently some options are not supported on older versions. 

Similar Messages

  • HELP! Fatal error with Installation

    I keep getting a fatal error with installation of version 7.6. I've uninstalled and installed it several times with the same problem. I have tried installing a older version again and now I'm getting the same error. Help!!

    Hi Jorge,
    I am sorry to hear that.
    Here are a few things that I suggest you try:
    Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
    If you have Windows Process Activation service installed on the machine, uninstall it.
    Open required RPC ports.
    More information for you:
    Service overview and network port requirements for Windows
    http://support.microsoft.com/kb/832017#method7
    If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
    Regards,
    Amy

  • SunStudio & Mandriva 2010: critical error during installation

    Hello!
    When installing SunStudio 12 upd.1 on Mandriva 2010 x86_64, a critical error is met right after accepting the license agreement. Log is here: http://pastebin.com/49KcCqtF
    What can I do to complete the installation? Thank you.

    SlonoInquisitor wrote:
    Hello!
    When installing SunStudio 12 upd.1 on Mandriva 2010 x86_64, a critical error is met right after accepting the license agreement. Log is here: http://pastebin.com/49KcCqtF
    Yes, something wrong with installer. Probably it has never been tested on Mandriva.
    What can I do to complete the installation? Thank you.Try to download tar file and extract it without installer.
    Thanks.
    Nik

  • Critical Error with Bank Information Process (Personal Information Area)

    Hi All,
    I am experiencing a critical error when I open the Bank Information details in the portal.
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Syntax error in program /1PAPA/FEAT000DTAEL, error key: RFC_ERROR_SYSTEM_FAILURE
    I have read the following threads Error in the Bank Details in the Personal information and Error in Change own data but none have assisted us with our problem.
    We have also looked at SAP Note 1018036 but this only applies to HP14 and we are currently on HP26 (ECC6.0).
    Everyone's help will be much appreciated.
    Thanks in advance.
    Oloy.

    Resolved, but can't remember how - need to close thread to raise new issues.

  • Critical error with data load

    Hello Gurus,
    I was trying to load data ffrom ODS to a Cube using DTP when I got the following error:
    Exceptions in Substep: End Routine - RSBK231
    The database returned a value containing an error
    Do you know what this error message means. It refers to a end routine and I had no syntaxt errors with the endroutine. It also worked fine with previous data loads.
    Any help in this regards is appreciated.
    Thanks
    Rishi

    Hi Rishi,
    There might be some syntactical error in your end routine e.g division by a zero. This is just an example. Try running the DTP in Debug mode (you will get the option under execute tab of DTP) and see what the end routine code is doing. There might be some exception which you need to take care of.
    Thanks..
    Shambhu

  • Critical error with default host

    Hi,
    I am relatively new to Web Logic and think I have made an error within the Web Logic Console with the default host parameter. As a result, I can no longer start up my WLS.
    Is there a way I can edit this parameter outside of the Web Logic Console?
    The error from the logs is below:
    ####<01-May-2012 12:22:30 o'clock BST> <Critical> <WebLogicServer> <AOKEEFF-GB> <AdminServer> <main> <<WLS Kernel>> <> <> <1335871350199> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    java.net.UnknownHostException: http://127.0.0.1
         at java.net.Inet6AddressImpl.lookupAllHostAddr(Native Method)
         at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:850)
         at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1201)
         at java.net.InetAddress.getAllByName0(InetAddress.java:1154)
         at java.net.InetAddress.getAllByName(InetAddress.java:1084)
         at java.net.InetAddress.getAllByName(InetAddress.java:1020)
         at java.net.InetAddress.getByName(InetAddress.java:970)
         at weblogic.rjvm.JVMID.setLocalID(JVMID.java:238)
         at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
         at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Thanks

    Along the lines that Fabian suggested, this is what you can do now.
    Create a new domain and compare the config.xml of that new domain with the existing one you have issues with. This should give you the an indication of the changes that need to be reverted from the existing config.xml.
    And as already suggested, always take a back of the config.xml before you make any changes. :)
    Thanks,
    Patrick

  • Errors with Installation of OER 11.1.1.5

    All
    trying to install OER 11.1.1.5.
    The installation works fine, including Db setup. schema install etc..
    Installing a base domain with the config.sh also works no problem at all
    But when I try to create an OER domain (not extending an existing domain, haven't tried that)
    the domain creation fails with a jython script error.
    I'll get the details and append this post, but I was wondering if this was
    a known problem
    Environment : Oracle Enterprise Linux R5U4 - 32 bit
    On Virtual Box VM 4.08
    WLS 10.3.5
    sun 1.6 jdk
    heres the log output 2011-05-22 20:42:47,915 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /home/u01/Oracle/middleware/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
    2011-05-22 20:42:47,939 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.4.0 [home/u01/Oracle/middleware/wlserver_10.3/common/templates/domains/wls.jar]
    2011-05-22 20:43:12,695 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
    2011-05-22 20:43:12,698 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2011-05-22 20:43:13,449 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.5.0
    2011-05-22 20:43:13,453 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
    2011-05-22 20:43:13,623 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2011-05-22 20:43:13,695 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
    2011-05-22 20:43:13,695 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.5.0
    2011-05-22 20:43:13,696 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
    2011-05-22 20:43:13,724 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
    2011-05-22 20:43:13,734 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
    2011-05-22 20:44:44,248 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
    2011-05-22 20:44:56,840 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
    2011-05-22 20:44:56,843 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
    2011-05-22 20:45:02,869 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
    Traceback (innermost last):
    (no code object) at line 0
    SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
    at org.python.core.parser.fixParseError(Unknown Source)
    at org.python.core.parser.parse(Unknown Source)
    at org.python.core.Py.compile_flags(Unknown Source)
    at org.python.util.PythonInterpreter.execfile(Unknown Source)
    at org.python.util.PythonInterpreter.execfile(Unknown Source)
    at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
    at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
    at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
    at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
    at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
    at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
    Edited by: michael_j_quinn on May 24, 2011 4:48 AM

    Hi Guys
    Is no one using OER ??

  • Error with Installation of SAP R/3 4.6C on Windows 64 Bit

    Hi,
    we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
    DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
    Cannot connect to DB, rc = 8192
    Can some one help me?
    What is the user connecting during the installation?
    Thank you!

    File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
    Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
    You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
    10=DATABASEINSTANCE_NT_MSS
    20=DBCOMMONDBENV_NT_MSS
    30=CALCRAM_NT_MSS
    40=CDSERVERBASE_NT_MSS
    50=OSGROUPSAPLOCAL_NT_IND
    60=OSGROUPSAPLOCALADMIN_NT_IND
    70=OSGROUPSAPGLOBAL_NT_IND
    80=OSUSERSIDADM_NT_IND
    90=OSUSERSIDADMPASSWD_NT_IND
    100=OSUSERSIDADMRIGHTS_NT_IND
    110=DBOSUSERMSSXP_NT_MSS
    120=DBOSUSERMSSXPPASSWD_NT_MSS
    130=GETDBSIZEKEYS_IND_IND
    140=DBBUILDTEMPDB_NT_MSS
    150=DBBUILD_NT_MSS
    160=DBPOSTBUILD_NT_MSS
    170=DBPRELOAD_NT_MSS
    180=DBMULTISCHEMA_NT_MSS
    190=DBDBSLTESTCONNECT_NT_IND
    200=DBR3LOADEXECDUMMY_IND_IND
    210=DBR3LOADEXEC_NT_MSS
    220=DBR3LOADVIEWDUMMY_IND_IND
    230=DBR3LOADVIEW_NT_IND
    240=DBPOSTLOAD_NT_MSS
    250=DBCONFIGURATION_NT_MSS
    260=DBPROCEDURES_NT_MSS
    270=DBR3LICENSECREATE_NT_MSS
    280=DIPGNTAB_NT_IND
    290=EXITMNLSSTARTR3_NT_IND
    300=RFCRSWBOINI_IND_IND
    310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND

  • Problem with running the midlet class (Error with Installation suite )

    hi everyone...
    i have problem with running the midlet class(BluetoothChatMIDlet.java)
    it keep showing me the same kind of error in the output pane of netbeans...
    which is:
    Installing suite from: http://127.0.0.1:49296/Chat.jad
    [WARN] [rms     ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
    i also did some research on this but due to lack of forum that discussing about this,im end up no where..
    from my research i also find out that some of the developer make a changes in class properties..
    where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
    i did that but also didnt work out..
    could any1 teach me how to fix it...
    thanx in advance... :)

    actually, i do my FYP on bluetooth chatting...
    and there will be more than two emulators running at the same time..
    one of my frens said that if u want to run more than one emulator u just simply click on run button..
    and it will appear on the screen..

  • Fatal error with installation of je22 con. arch. beta impl.

              In step 6 it says that classpath must start with connector.jar and
              welogic60J2eeConnector.jar. But if I do that then the following
              fatal error occurs. But if the jar files are after weblogic_sp.jar
              and weblogic.jar then there is no problem with starting the server.
              How can I avoid the error? Thanks.
              <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server> <Unable to
              initialize the server: 'Fatal initialization exception
              Throwable: java.lang.VerifyError: Cannot inherit from final class
              java.lang.VerifyError: Cannot inherit from final class
              at java.lang.ClassLoader.defineClass0(Native Method)
              at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
              at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
              at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
              at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
              at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
              at java.security.AccessController.doPrivileged(Native Method)
              at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
              at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
              at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
              at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
              at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
              5)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
              5)
              at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
              e_WLStub.java:248)
              at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
              at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
              at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
              java:38)
              at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
              at weblogic.Server.main(Server.java:35)
              '>
              

              Sorry for the confusion. As you have already installed wls6.0SP1, you
              can download our JCA beta for wls6.0SP1 from:
              http://developer.bea.com/code/wls.jsp Or directly from:
              http://developer.bea.com/ftp_bin/weblogic60SP1J2eeConnector.zip
              prasen
              Murali wrote:
              >
              > Hi
              >
              > Thanks for the prompt reply.
              > I have once again installed the weblogic600sp1_win.exe (that's
              > the only one available for NT) and the weblogic_sp.jar was not
              > installed (shouldn't it also be with the package). I don't know
              > whether there are any other files which conflict with connector
              > but the problem still exist. I have also wl5.1.0 installed on
              > the same machine. Can both versions be on the same machine?
              >
              > With best regards,
              > murali
              >
              > prasen <[email protected]> wrote:
              > >Looks to me that you are using JCA with weblogicServicePack.
              > >Our JCA for
              > >WeblogicServicePack will be coming out soon. Till then
              > >you should use
              > >our JCA beta with Weblogic6.0(and not with SP).
              > >
              > >prasen
              > >
              > >"N.S. Murali" wrote:
              > >>
              > >> In step 6 it says that classpath must start with connector.jar
              > >and
              > >> welogic60J2eeConnector.jar. But if I do that then the
              > >following
              > >> fatal error occurs. But if the jar files are after weblogic_sp.jar
              > >> and weblogic.jar then there is no problem with starting
              > >the server.
              > >> How can I avoid the error? Thanks.
              > >>
              > >> <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server>
              > ><Unable to
              > >> initialize the server: 'Fatal initialization exception
              > >> Throwable: java.lang.VerifyError: Cannot inherit from
              > >final class
              > >> java.lang.VerifyError: Cannot inherit from final class
              > >> at java.lang.ClassLoader.defineClass0(Native
              > >Method)
              > >> at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
              > >> at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
              > >> at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
              > >> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
              > >> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
              > >> at java.security.AccessController.doPrivileged(Native
              > >Method)
              > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
              > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
              > >> at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
              > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
              > >> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
              > >> at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
              > >> at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
              > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
              > >> 5)
              > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
              > >> 5)
              > >> at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
              > >> e_WLStub.java:248)
              > >> at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
              > >> at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
              > >>
              > >> at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
              > >> java:38)
              > >> at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              > >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
              > >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
              > >> at weblogic.Server.main(Server.java:35)
              > >> '>
              

  • Error With Installation CD (Zen Mic

    Hello,
    I have recently received a Zen Micro. I attempted to load the software on my computer from the Installation CD provided. When my computer reads the CD the Creative logo comes up and then a screen comes up that says to click the arrow button to begin installation. When I click the arrow button after a few seconds a error message comes up saying the following:
    "DemoShield Player has encountered a problem and needs to close. We are sorry for the inconvenience"
    It then goes on to say that they have created a error report, I have chosen not to send the report.
    No matter what I try the error still appears. Any advice?

    I think this is a common problem.
    http://forums.creative.com/creativel...essage.id=2475
    Click. Then press ctrl+F. Type in "DemoShield" and hit enter.

  • Error with installation of elements 11

    I had the trail version of 10 installed, decided to wait and get 11, and it errors every time I try to install.   Any ideas? 10 installed no problem.

    Hi,
    PSE 10 trial should not affect the installation of PSE 11 .
    I am assuming you are getting the error related to Shared technology installtion problem .
    Please restart your system and then install .
    Even it does not solve your problem please try solution under this page.
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
    thanks,
    earth-star

  • Error with installation of EX Edition

    hi
    I am trying to install expresses edition and was successful also. I am able to run sql+ and isql but when i run enterprise database managment tool on the browser it says server not found. i ran emca also and started the service but still i am getting the error. If anyone else has face the problem and know the solution kindly let me know
    regards
    dev

    the java version yes, not the dbconsole that the OP
    was talking aboutGood to know. I only remembered an Oracle session, where they mentioned that XE doesn't come with an "agent" to be addressed by remote OEM ... or was it OMS?
    C.
    Message was edited by:
    cd

  • Error with installation

    When I download any of the updates 11.0-2 to 11.0.0-3, I get an error message saying I can't ope nthe patcher app because it was not downloaded from the Apple App Store.
    Mavricks, AE CS6 version 11 (which won't open ).
    Any clever soul know a workaround for this nonsense?

    Hi,
    I've been trying to patch my CS6 to work with Mavericks for weeks now.
    Spent four hours on the phone and Adobe Connect with Tech support yesterday, I got the impression the guy gave up (told me to reinstall Mavericks and try a clean reinstall, which i did, no go)
    Very annoyed because it seems I've wasted £165 on the upgrade to CS6, nearly a week of labour trying to patch the ^&$*&^ thing, and the result seems to be I have to continue asking my clients to down-save any AE docs to CS5.5 before I can work on them.
    Very disappointed.
    thanks for all the tips anyway!

  • Errors with installation Disc 2

    i tried to reinstall Tiger since it appeared that the OS needed to be reloaded to resolve another problem, which is that the apple bar disappeared. Now when i get to disc 2, it tells me there are errors and I have to try again. I've followed all of the useful advice on this thread, reset the PRAM, etc but still have the same problem after innumerable attempts to reinstall. Yes, I did clean the disc, and before today it was used exactly once.
    http://discussions.apple.com/thread.jspa?messageID=7739310
    Anyone have some suggestions? Plan B is to bring it to the apple store and let them figure it out
    cheers

    Hi pj3,
    Did you not try this one from that link?
    Use the Customize Install option to reduce the Fonts, Printer Drivers, Languages, and Applications to a minimum, so disk 2 never gets asked for.
    Second install disk won't work...
    There've been many reports of this, some had the disks replaced by Apple and it worked, some didn't.
    A workaround is to reduce the number of Languages, Printer, Drivers, Fonts, and APPs until it no longer needs Disk 2 for the install.

Maybe you are looking for