Critical Irish Update needed to solve black and white tv problem on G20!

I recently had trouble with setting up tv on my Qosmio G20, I was pointed in the direction of a black and white problem that affects earlier models. The solution to the problem was to use the g20's drivers and run 2 reg files.
Having done that to no success i tried every irish combination possible, with still black and white, I then tried UK and got colour.
I mucked about with the registration files and found that in the file, there was no irish setting, So when a user puts ireland in as their location they will always get black and white.
Ireland uses the exact same settings for tv as the UK does, However if a person choses UK they will not get irish guides or irish channels to pick from (ireland isnt part of the uk)
i found the settings for the UK -
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\44]
@="United Kingdom"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
Figuring the 44, was the dial code for UK (that took a while to figure) i added a registry entry with exactly the same settings, but with ireland and 353 at the top.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\353]
@="Ireland"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
I now have colour tv under the irish settings in media centre, i also have sound now, where before i didnt. Hopefully the above code will be added to the registry file named ttv2_regdata_20050111.reg that comes as part of the http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm driver fix for the problem..
thanks to jimi in the following post http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.
Hope it helps someone..
laters taters...

I can confirm the problem isnt to do with win dvd creator 2 for toshiba. My registry setting was at 0.
Its bascially a known problem that was fixed, however it wasnt fixed for irish people.
When windows wants to play tv it looks in the registry to find out what settings to use. There are no irish ones. Our signal is technically the same as the UK, so using UK settings fixes the problem, However the UK guide doesnt work for irish channels. For the tv to work in colour windows needs the 353 settings.
I think the guy on this thread was having the exact same problem that is fixed with the registry entry.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2488&tstart=75
This problem will only affect a small amount of users, The fix that comes with the toshiba drivers needs the irish settings added, Then the problem will be solved by updating the drivers.
until then any irish people can fix their black and white tv signal by adding the above registry entrys.
for trouble shooting purposes here is a list of countries where the bug is fixed... If someone complains of black and white tv on the qosmio series, this list can be checked, and if the persons country is absent, it could be the problem. To fix the problem you need to find out their country call code (+353 is ireland, +44 is UK) You also need to know the settings to add, i did this by looking at the UK settings in the file ttv2_regdata_20050111.reg that comes in the "reg" folder that comes for the qosmio tv driver.
here is the list of countries that an update of driver will work for...
"United States"
"Japan"
"Australia"
"Newzealand"
"China"
"Korean"
"United Kingdom"
"German"
"Italia"
"Swiss"
"Netherlands"
"Belguim"
"Luxemburg"
"Spain"
"Portugal"
"Russia"
"Ukraine"
"Azerbaijahn"
"Kazakhstan"
"Saudi Arabia"
"UAE"
"Lebanon"
"Kuwait"
"Egypt"
"Bahrain"
"Qatar"
"Jordan"
"Oman"
"Norway"
"Sweden"
"Denmark"
"Finland"
"Turkey"
"Greece"
"Israel"
"Cyprus"
"Poland"
"Slovakia"
"Czech Republic"
"Hungary"
"South Africa"
"Senegal"
"Mali"
"Kenya"
"Tanzania"
"Romania"
"Slovania"
"Bulgaria"
"Estonia"
"Lithuania"
"Latvia"
"Malta"
"Yugoslavia(Selvia Monteneglo?)"
"Singapore"
"Hong Kong"
"Taiwan"
"Malaysia"
"Thailand"
"India"
"Philippine"
"Indonesia"
hope that helps.

Similar Messages

  • Black and white printing problem on Epson Artisan 50

    When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

    Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
    What I have found by searching is this quote:
    "Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
    Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
    Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

  • Just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

    just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

    Is the iTunes window in FullScreen mode?
    If so, press esc key.

  • Trying to update and my nano screen goes from color to black and white...

    Last time this happened I lost all of the information on my ipod.
    I was trying to get my newly purchased music from itunes to my nano. I couldn't. The help sections told me to update my ipod. I'm currently trying to update with 2006-03-23 and the screen still says "initializing" and actually as I type this the screen that says initializing appears frozen (although I've learned apple stuff is weird because it appears frozen but it's not). How long should this take? Is there something I'm doing wrong? Why does my ipod screen go from color to black and white? Do I need to redo anything? Do I need to reset my nano?
    Please help with the ******** mac user (I've always used Windows and I am lost in the mac world apparently when it comes to ipods)

    Can you get the exact wording for that error? Is it can't mount iPod?
    Also, make sure iTunes is up to date...
    iTunes
    Finally, make sure your iPod's battery is charged up.
    btabz

  • Video camera - Need to shoot in Black and White

    We need to shoot video in black and white, We have tried to shoot in night  mode.  But the result is the colors being brighter and not lighter.  We need to do video coding with these so the colors being too bright is not working out.  any imput on a video camera that will shoot in black and white and has an SD card slot?

    I have internal memory on some of my cameras and I NEVER use it.  It's faster and cheaper to use a USB reader.  Why run down your batteries and go looking for a cable.
    What can you do with $100 savings?  Click on this link...
      http://www.bestbuy.com/site/PNY+-+32GB+Secure+Digi​tal+High+Capacity+(SDHC)+Class+10+Memory+Card/2300​...
    You might even find cheaper SD memory elsewhere.  My local computer dealer is selling 16gb for under $10!
    With the $100 savings you can spend it on a second battery.  Then again, consider spending it on an extended battery so you can record more than 30 minutes.  Unless you plan to use the camera connected to the wall at all times.

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • [SOLVED] xfce+slim, suspend to RAM causes black and white strips

    I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I click the "suspend to disk" (hibernate) button the screen turns black but the backlight is still on, the only way to get out of this state is to do a force shutdown with the button.
    I don't know if this is just an xfce problem, or if slim is also part of the problem, but it doesn't hurt to let you guys know about that as well.
    Reading about this problem somewhere else as a probably graphics driver issue, here's my graphics card:
    NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
    and I installed the Nvidia nouveau driver from here. I didn't see anything on that page about this kind of issue.
    I also tried to add "ck-launch-session dbus-launch" to my .xinitrc file, I knew it probably wasn't the solution but I wanted to try anyways. didn't work.
    I also have 2 gigs of RAM and 3 gigs in swap partition.
    What do you guys think?
    Last edited by Zonqt (2013-01-12 02:37:59)

    I have a slight newbie question that's related to my problem: after installing pm-utils am I supposed to have a file /etc/pm/config.d/modules? I reread the docs on suspend and standby here and the instructions are implying I should already have such a file, (since they say to modify it rather than create it), but I've installed and reinstalled the pm-utils and don't have any file there.
    It's kind of important too, since i'm thinking I should put my graphics driver as one of those suspended modules...
    Edit: one more interesting tid bit, when I use "pm-suspend" in the tty command line (by disabling the slim service and never going to xfce) I suspend fine. I need to have root privileges but I can just use sudo. (this is another reason why it could be a graphics card issue or I guess a privileges issue, hmm)
    Edit2: I just tried to login as root from slim and hitting the suspend button, but got the same issue. So it's likely not a privileges issue. Strange.
    Last edited by Zonqt (2013-01-11 17:10:49)

  • Iphone4s turned to black and white with ios8 update

    just recently i have updated my iphone 4s to ios8 and the screen and all the contants turned black and white.....does anyone know how to fix this problem.....
    I think ios8 is not for iphone 4s....help me

    A reset is holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot, and it will not affect your data. If that doesn't do it, you can try a restore, but I would make an appointment at the Genius Bar of the nearest Apple Store or your Authorized Apple Service Provider. The screen could be going bad.

  • I need to print in black and white

    My printer has a black cartridge and a color cartridge.  Any thing I scan that is in color prints in color.  I need to scan a color document and print it in black and white.  There are no options when I hit print for printing in black and white instead of color.  How do I do that?

    Hi lasers, If you are printing direct from the scanned image try the following. Select print - select options - Printer Properties - Advanced - There will be an option to print in greyscale in this menu. I hope this helps. Please let me know if I can help with anything else. Many Thanks,Francheska   

  • Updated To Mountain lion and since then aperture software is all "black and white"

    Hi Folks,
    Since I have upgraded to Mountain Lion, my Aperture (3.4 now) is having a black and white looking field (all menus and icons are in black and white). Tried to repair but still does not work , argggg
    Thanks
    Cheers !
    G99

    Unfortunately, that is a feature and not a bug.
    It's the new design since Lion - Iphoto already has gone gray before Aperture See for example these links:
    Re: After updating to Aperture 3.3 all my icons appears in Black and white. This includes the inspect button, photo stream button, the Facebook / flicker share button. Could you please help here ?
    How to bring back the color: (for experienced users only)
    Re: Have today loaded the 3.3 up date on Aperture. After the up date the colour of the Menu Bar and all icons showing projects / albums etc are now grey. Any thoughts on how to reestablish the colours.
    There are many more threads on this. Browse a little.
    Regards
    Léonie

  • Pro15-inch with a lion at the bottom of the system, my computer is not always closed machine, has been a black and white, seems to read the disks that thing has been turning away, how do ah (do not want to reload) to help solve it

    pro15-inch with a lion at the bottom of the system, my computer is not always closedmachine, has been a black and white, seems to read the disks that thing has beenturning away, how do ah (do not want to reload) to help solve it

    What are you talking about?

  • Hello!  I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!) Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?

    Hello!
    I need Apple (!!!) headphones for Ipod Shuffle 3! (only apple earphones with remote and mic!!!)
    Tell me, what distinguishes the model are presented in black and white boxes? They may differ in features? Can one model is more modern than the other?
    Thanks in advance!

    Hi Fencer1986,
    I apologize, I'm a bit unclear on your request. If you have questions about headphone compatibility for your iPod shuffle 3rd Gen, you may find the following article helpful:
    iPod shuffle (3rd generation): About headphone compatibility
    http://support.apple.com/kb/ht3472
    Regards,
    - Brenden

  • I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestion

    I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestions?
    MacBook, Mac OS X (10.6.8)

    I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestions?
    MacBook, Mac OS X (10.6.8)

  • PSE8  Black and White scanned pics need editing

    Any suggestions how to retouch an older black & white photo?  I scanned it into PSE8 and it needs some major adjustments.  My last photo editing program had tools for just black and white edits.  Help!

    Thanks Bob for your timely response.  I found my problem was due to choosing
    the "black and white" option for scanning.  Apparently, that is for text.
    The correct option was "grey tones" for scanning black and white photos.

  • FF windows go black and white and everything seems to stop when it is a bit busy. Why is this? Why on a fast quad machine, can FF not keep going? Do I need to adjust settings?

    From time to time FF seems to freeze temporarily and the windows all go black and white. FF will not then respond. After a while (many seconds) the colour comes back to the windows and it responds again.
    I have a fast quad machine so it seems odd that everything needs to stop because something somewhere is not responding as wished.
    It has behaved like this for many versions but I have never found an explanation.

    It's in warranty. Take it in for service to be sure this isn't a hardware problem.

Maybe you are looking for

  • Error in posting

    Hi Error in posting error is Posting period 002 2008 is not open?? how to open posting period?? regards

  • Can't create a Virtual Machine on new host - Error (2915)

    This error is appearing when a Virtual Machine is created from scratch, or from a template. I've tried all of the recommendations I can find. All updates are in place, VMM reports agents are current, server is "OK". VMM Agent is running. Rebooted man

  • Error syncing with Yahoo

    Until a couple of weeks ago everything was fine and I was able to do a sync everyday with my Yahoo calendar and address book....now I get "Yahoo sever is not accessible, try to again in a few minutes:. It has been weeks and I can't sync. I checked fo

  • Oracle instant Client and unixODBC for Linux has Error

    Hi experts, I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xx

  • BI LSO - use of business content: problem and limitation

    Hi, we are working on BI to develop some reports from LSO data. We are using 0HR_LSO_1 and 0HR_LSO_3 for participation and resource reservation and a lot of custom datasources from infotype 1001, 1000, 1042, 5007, and so on. We have met lot of proble