Critical Kernel error while on windows partition, now neither mac or windows will boot help ?

Hi I was on my windows side of my mac when i got the blue-screen-of-death with something saying Critical Kernel Error, weird noises from the speakers and the macbook pro did a hard shut off.
Since then I can no longer boot into the mac or windows side (both are stuck infinitely loading). I ran disk utility on the mac side and I have an "Invalid Node Structure." Which disk utility cannot repair. I do have DiskWarrior on another mac to try and rebuild the mac partition through a firewire connection - i think that is the correct course of action ?
But does this mean my windows partition is likely gone or any idea what went on ? As I am terribly confused that while on my windows side I had an error that messsed up both partitions.
Or what to check for so this hopefully doesnt happen again if it is a hardware problem? My drive smart status is listed as "OK" and I cant seem to run the Apple Hardware test as upon attempting to get into it the laptop just shuts off while loading it, although I read somewhere the Apple Hardware test is no longer preloaded on macbook pros.
The system in question is a 15" macbook pro bought around July 2011.
Thank you,
Wes

Alright I have both my mac side and windows side repaired and functioning fine. Should I still be concerned ? Linc I know you are saying this is a drive malfunction but is there a way I can be sure ? I still cannot run AHT (restart, hold down D), and my laptop shipped with Lion installed so I believe it should run. It just boots into the mac side when I hold D..

Similar Messages

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

I made a windows partition on my mac but now i cant swap back to the mac part so is there any way that i can delete the windows partition whilst running windows 7 so i can go back to the mac part

i made a windows partition on my mac but now i cant swap back to the mac part so is there any way that i can delete the windows partition whilst running windows 7 so i can go back to the mac part

You are telling us you read and tried the normal methods?
Boot Camp or Taskbar. Option on restart. "x" on startup. And none of those work.

FF16 always fails to sync, it always shows "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this."

I'm having this problem since few releases ago, whenever I start FF, it always fails to sync, showing this line on the bottom "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this action". First thought that the prob was incorrect credentials, but I can freely log-in https://account.services.mozilla.com I tried unlinking and linking my device again, it still happens.
I waited thinking that they'll fix this, from a release to another, today updated to the last version and it still happened.
Firefox: ~16.02
Windows 7 Ult SP1
http://img853.imageshack.us/img853/4070/ffsyncprob.png
Awaiting reply,
Thanks.

I am having this problem with FF 19.0.2 on Win 7 Pro. The sequence of events is:
1. Start Firefox. Get the error bar about incorrect account name or password EVERY time. I close the bar. If I wait a while and then ask FF to try again the error bar reappears.
2. Click on preferences from the bar, and get a dialog "Your password was rejected by the server, please update your password." I click "update" and then am prompted for the master password for the security device. I enter that and am presented with an "update password" dialog.
3. Enter my old password and click "update password." Receive error message "Password incorrect, please try again." I click update again and get the message "Your password has been changed."
4. However now Sync no longer seems to be set up. I go through the setup ritual again, and find I am back where I started.
I have cleared cookies, tried everything in safe mode, and unlinked and relinked the computer. I have verified I have the right password entered at [https://account.services.mozilla.com/ https://account.services.mozilla.com/] None of this helped. The problem is still there, even in safe mode.

Insteade of using mac os on macbook pro, i wanted to install windows 8 pro on mac book pro, will that void my warranty

insteade of using mac os on macbook pro, i wanted to install windows 8 pro on mac book pro, will that void my warranty

Installing any OS you want on your machine will not void the warranty. Only making hardware changes other than those listed as "user servicable" by Apple, or negligence will void your warranty.
I will warn you that there might be SMC or EFI udates you will want for your Mac hardware that are only available if you are runnign Mac OS. For this reason, you may want to keep a small partition on your drive which still has Mac OS installed, or at the very least, keep an external HD around to be able to boot Mac OS. Additionally, if you are having hardware issues, like a failing DVD writer, you may have a harder time getting Apple to repair it under warranty if you can not reproduce the error under Mac OS. When I had the DVD writer replaced in my first MacBook Pro, I found the problems trying to write discs under Windows 7, but when the tech could reproduce an error under Mac OS, he quickly accepted it was a hardware problem and not software. Without reproducing it under Mac OS, he admitted that he might not be able to get them to replace the drive.

I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?, I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?

I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,

Try starting in safe mode:
Ciao.

I receive an error while trying to partition my Harddrive back to one.

So I have messed around with using bootcamp and and disk utlity to create partitions for Ubuntu. I decided to erase the extra partition and give all the space back to my macintosh HD. I go to the partition tab in disk utility and drag the macintosh box to fill the whole box and then hit apply. After a few moments I then recieve the error saying:
"Partition failed with the error:
Couldn’t modify partition map because file system verification failed."
I ran a verfiy disk on my macintosh hd and then recieve these errors:
Invalid volume file count
(It should be 545026 instead of 544821)
Invalid volume directory count
(It should be 140857 instead of 140673)
Invalid volume free block count
(It should be 123856639 instead of 123864717)
Volume header needs minor repair
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility.
I then command R while boot and repair the drive. Tried resizing the parition again and same error.
I have spent some time googling what people have done but find this problem occuring with alot of people upgrading to Lion or something. I'm on a 2011-late macbook pro that came with lion.
I have tried things such as doing the Lion restore and booting in command S and typing fsck -fy for a repair. Nothing work.
I am about two hours away from a "genius bar" so fixing this problem on my own is a must.

When disk repair fails, it usually is not a good sign and could mean you ave a failing hardrive. All I can suggest is to back up all your data. My choice would be either SuperDuper or CarbonCopy Cloner
Then do reformat and do a clean install and test.

Partitioned nested table error while dropping one partition

All,
I created a partitioned table which is also a nested table as you can see below. I got FK constraint error while attempting to drop a partition, however, I could not find the FK in order to disable it since it's underlying table emp_list_p which is not visiable to applications. How could I drop the partition in this case?
Thanks,
Jianhui
SQL>desc emp_t
Name Null? Type
ENO NUMBER
ENAME VARCHAR2(30)
SAL NUMBER
SQL>desc emp_list_t
emp_list_t TABLE OF EMP_T
Name Null? Type
ENO NUMBER
ENAME VARCHAR2(30)
SAL NUMBER
SQL>l
1 create table dept_p
2 (dno number,
3 dname varchar2(30),
4 emplist emp_list_t )
5 NESTED TABLE emplist store as emp_list_p
6 partition by range (dno)
7 (
8 partition p1 values less than (2),
9 partition p2 values less than (3)
10* )
SQL>/
Table created.
SQL>insert into dept_p (select * from dept);
2 rows created.
SQL>select * from dept_p;
DNO DNAME
EMPLIST(ENO, ENAME, SAL)
1 HR
EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000))
2 SALES
EMP_LIST_T(EMP_T(3, 'frank', 800))
2 rows selected.
SQL>alter table dept_p drop partition p1;
alter table dept_p drop partition p1
ERROR at line 1:
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
SQL>l
1 select constraint_name, constraint_type, table_name
2 from user_constraints
3 where r_constraint_name=(select constraint_name
4* from user_constraints where table_name='DEPT_P' and constraint_type in ('P','U'))
SQL>/
no rows selected

SQL> create type emp_t as object(
2 ENO NUMBER,
3 ENAME VARCHAR2(30),
4 SAL NUMBER)
5 /
Type created.
SQL> create type emp_list_t as table of emp_t;
2 /
Type created.
SQL> desc emp_list_t
emp_list_t TABLE OF EMP_T
Name                                      Null?    Type
ENO                                                NUMBER
ENAME                                              VARCHAR2(30)
SAL                                                NUMBER
SQL> create table dept_p
2 (dno number,
3 dname varchar2(30),
4 emplist emp_list_t )
5 NESTED TABLE emplist store as emp_list_p
6 partition by range (dno)
7   (
8   partition p1 values less than (2),
9   partition p2 values less than (3)
10   )
11 /
Table created.
SQL> insert into dept_p values(1, 'HR',
2 EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000)));
1 row created.
SQL>
SQL> insert into dept_p values(2, 'SALES',EMP_LIST_T(EMP_T(3, 'frank', 800)));
1 row created.
SQL> select * from dept_p;
       DNO DNAME
EMPLIST(ENO, ENAME, SAL)
         1 HR
EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000))
         2 SALES
EMP_LIST_T(EMP_T(3, 'frank', 800))
SQL> alter table dept_p drop partition p1;
alter table dept_p drop partition p1
ERROR at line 1:
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
SQL> select constraint_name,table_name,constraint_type from user_constraints
2 where table_name = 'DEPT_P';
CONSTRAINT_NAME                TABLE_NAME                     C
SYS_C008224                    DEPT_P                         U
SQL> select index_name from user_constraints
2 where table_name = 'DEPT_P';
INDEX_NAME
SYS_C008224
SQL> select index_name,column_name from user_ind_columns
2 where index_name = 'SYS_C008224';
INDEX_NAME                     COLUMN_NAME
SYS_C008224                    EMPLIST
SQL>
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
If you look closely, there is a unique index on dept_p. Oracle does not advertise it.
One of the options is that you may have to delete the rows in the partition first,
then drop the partition.

Error while creating router partition in 11.2

Hi,
I get the following error while running sdo_router_partition.partition_router. Please help in solving this.
Error starting at line 12 in command:
BEGIN
sdo_router_partition.partition_router;
END;
Error report:
ORA-20000: Oracle Router partitioning failed
ORA-06512: at "MDSYS.SDO_ROUTER_PARTITION", line 1321
ORA-06512: at line 2
20000. 00000 - "%s"
*Cause: The stored procedure 'raise_application_error'
was called which causes this error to be generated.
*Action: Correct the problem as described in the error message or contact
the application administrator or DBA for more information.

You might want to tune PKG_CLIENT_LOWSPEED_TIMEOUT before running "zoneadm install"
For example:
# export PKG_CLIENT_LOWSPEED_TIMEOUT=300

Error while installing HFM 9.3.1 Client on windows 7.

Hello,
I am trying to install and configure HFM 9.3.1 client on windows 7 x64 machine, but getting following two errors while configuring with shared service, in random manner.
1. An Unknown CSS error occurred. Please check that information entered is correct.
2. Registration parameters cannot be validated successfully. Please check that information entered is correct.
I found these entries in configtool_err.log:
(Feb 01, 2013, 05:02:35 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to initialize CSS API
(Feb 01, 2013, 05:02:35 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Feb 05, 2013, 09:16:41 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Error:
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: Cannot configure the system. Please check the configuration. Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from cache.
I am using default admin and password to configure,
I can ping server from windows 7 machine.
I checked and all services are running on servers.
Did i miss something?
What should I do to configure it successfully?
Thanks in advance,

Hi Vivek,
I tried following steps in local POC:
1. Install 9.3.1,
2. Upgrade it to 9.3.3,
3. configure it.
but getting issue with "Server and cluster registration" I am getting error as, "An error occurred while adding Cluster to the list."
Any idea how to resolve it? I am not able to configure HFM 9.3.3 client.
and also I can see *"Web server, Related Content & Smart view provider tabs in configuration utility"*, along with error while opening two of these three tabs *"Failed to obtain IIS version. Please check the IIS installation"*
I found one document on support but it was not much helpful.
*Server Configuration Tabs in the Server and Web Configuration Utility Are Available on Windows 7 Machines with Only Desktop Client Installed. [ID 1367553.1]*
Thanks,

Error while interacting with scanner acrobat 9.0 and windows 7 and user profile

After using Acrobat 9 for years I get a "Error while interacting with scanner". I have uninstalled and reinstalles the drivers for my Epson Expression 1600 scanner and still get the message. I did get it to work by changing to a differ window user account. Is there anyway correct the problem for the orginal user account.
Thank you

Using MSPaint works fine also,......................
As for the question as to whether the update broke I can't honestly remember, I know it worked finr with an old HP scanner I had but as to the version of Acrobat at that time I don;'t recall
Anyway getting fed up with this issue, I de-installed it, rebooted and re-installed.
Ver 9.0.0 says the scanner driver is not installed or connected
Ver 9.2.0 says the same.
Ver 9.3.4 says error while interacting while interacting with scanner.........
The scanner works with MSPaint, its own driver and application.
What is wrong with this Adobe Acrobat Pro 9?

ORA-02266: unique/primary keys - error while using Exchange Partition

Hi All,
While using EXCHANGE PARTITION statement as given below,
ALTER TABLE SOURCE_TABLE EXCHANGE PARTITION PRT_EXCG_PRTN WITH TABLE TARGET_TABLE
we are getting this error,
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
However, there are no tables have foreign keys referring this TARGET_TABLE, we checked this by referring
USER_CONSTRAINTS table, it has only primary key and NOT NULL constraints.
SELECT * FROM USER_CONSTRAINTS WHERE TABLE_NAME like 'TARGET_TABLE';
We are using the following version,
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for IBM/AIX RISC System/6000: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
Is it due to any error in our end or it could be a bug in Oracle and should we go for any patch updation ?
Please guide us to resolve this error as soon as possible, thank you.
Regards,
Deva

*** Duplicate Post ***
Please Ignore.

HT4623 My iphone had an error while updating and is now locked up on the apple screen with the progress bar

Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.

hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.

Critical program error while opening some workbook

Hi all,
We are in BI 7 with suppoprt package 12 and GUi version 710.
Whenever iam trying to to open some workbooks system is showing the mesaage Critical programm error. I checked the trace file also but din t get anything . Th trace file is saying:
BExConnect.Trace3: 0
BExExcelTraceListener.AddTraceListener: Added a tracelistener for Version: 7100.0.461
BExConnect.constructor2: 23.59375
BExMenu.CreateSubMenu1: 0.15625
BExMenu.CreateSubMenu2: 3.75
ListSeparator: ,
openworkbook
GetSystemInformation
SUNI Const: 0
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 0.15625
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 0.15625
CommunicationFactory.GetSystemInformation (Setting init Propties)): 0.15625
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 0.625
RSR_XLS_RFCtrc: 4.0625
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 7.8125
CommunicationFactory.GetSystemInformation (XML Stuff)): 10.9375
CommunicationFactory.GetSystemInformation (Prop Stuff)): 10.9375
CommunicationFactory.GetSystemInformation (Version)): 10.9375
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 10.9375
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 0
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 10.9375
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 2.65625
CommunicationFactory.LogOn: 13.90625
RSR_XLS_RFCtrc: 0
BExThemes.LoadFromBackend: 2.8125
BExConnect.LogOn: 70.46875
OpenWorkbookGetWorkbookId
RSR_XLS_RFCtrc: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
RSR_XLS_RFCtrc: 0
RSR_XLS_RFCtrc: 0.15625
RSR_XLS_RFCtrc: 0.3125
openworkbook
BExConnect.LogOn: 633331433736.094
OpenWorkbookGetWorkbookId
RSR_XLS_RFCtrc: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
RSR_XLS_RFCtrc: 0
openworkbookparam
openworkbook with param
BExConnect.LogOn: 633331433790
OpenWorkbookGetWorkbookId
OpenWorkbookGetTheMimeAndStoreItOnTemp
RSR_XLS_RFCtrc: 1.5625
13/12/2007 11:49:41 AM----
System.ArgumentException: Item has already been added. Key in dictionary: 'WORKBOOK_MODE' Key being added: 'WORKBOOK_MODE'
   at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
   at System.Collections.Hashtable.Add(Object key, Object value)
   at com.sap.bi.et.analyzer.api.BExApplicationProperties.CreateFromDeSer(BExDeSer_Properties[] iPropties)
   at com.sap.bi.et.analyzer.api.BExApplication.CreateFromDeSer(BExDeSer_Page iPage)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
Item has already been added. Key in dictionary: 'WORKBOOK_MODE' Key being added: 'WORKBOOK_MODE'
   at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
   at System.Collections.Hashtable.Add(Object key, Object value)
   at com.sap.bi.et.analyzer.api.BExApplicationProperties.CreateFromDeSer(BExDeSer_Properties[] iPropties)
   at com.sap.bi.et.analyzer.api.BExApplication.CreateFromDeSer(BExDeSer_Page iPage)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
Can naybody help me in this regard as the same workbook is opening in other system..Points will be awarded for the helpful answers..
Thanks in advance..

Niyati,
That hotfix can run only to the 640, even we have the same problem over here. Actually you should not upgarde the front end patch if you want to install. But that hot fix might run or may not run, you may get issues later with the GUI..
All these probles will cause becoz of frontend patch... If you are at patch 27 then you need to unistall and come back to the same patch level as your colleague has... actually i dont know how to unistall that patch.. Or else try out with frontend patch 28...
Hope it helps..
Assign points if it helps
Gattu

Critical Kernel error while on windows partition, now neither mac or windows will boot help ?

Similar Messages

Maybe you are looking for