"Critical program error" in BEx Analyzer due to missing BExCompression

Hello. I saw several posts with a "Critical program error" message in new BEx Analyzer 7.0 when try to run query ir workbook, but have not seen any answers to them.
When I look into the trace file BexAnalyzerTrace_<session_id>.txt (attached) in my temp directory, I see following:
System.IO.FileNotFoundException: File or assembly name BExCompression, or one of its dependencies, was not found.
File name: "BExCompression"
at com.sap.bi.et.analyzer.api.BExApplication.DeSerializeApplication(String iString)
at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
But I cannot find any further reference to BExCompression.
Thanks!
Vitaliy

Hi prakash,
we have installed the SAP GUI 7.10 with patch 5 and all the other mandatory components. while working in the query designer for sometime we used to get message " critical program error occured program needs to close" , we still cant figure out what the reason for this. this keep on occuring even if a new session is open.
please advise us what we need to do and if you have any installation guide for this i appreciate if you can share with us.
mail to : [email protected]
thanking you.

Similar Messages

"Critical Program Error" in BEx 7.0 in GUI 7.10 (MS Excel 2007)

Hi,
I am using MS Office 2007 SAP GUI 7.10.
When I try to run a query in the BEx Analyzer 7.0, a "A critical program error occured. The program has to close. Please refer to the trace for further information." message appears.
This is what i see in my trace file:
System.NullReferenceException: Object variable or With block variable not set.
   at Microsoft.VisualBasic.CompilerServices.Symbols.Container..ctor(Object Instance)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.SetDesignShape(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.Create(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExItemTextElement.Create(BExParameter iParameter)
   at com.sap.bi.et.analyzer.api.BExItem.CreateInternal(BExParameter iParameter, BExApplication iApplication)
   at com.sap.bi.et.analyzer.api.BExItems.CreateItem(BExParameter iParameter)
Object variable or With block variable not set.
   at Microsoft.VisualBasic.CompilerServices.Symbols.Container..ctor(Object Instance)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.SetDesignShape(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExExcelItem.Create(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExItemTextElement.Create(BExParameter iParameter)
   at com.sap.bi.et.analyzer.api.BExItem.CreateInternal(BExParameter iParameter, BExApplication iApplication)
   at com.sap.bi.et.analyzer.api.BExItems.CreateItem(BExParameter iParameter)
Kindly help me with this problem.
Thanks
Si Jie
Edited by: Si Jie Yeow on Oct 24, 2008 10:59 AM

Hello,
Check this thread and follow the steps that are suggested in there:
BEx of GUI 7.10 not working after MS Office upgrade to 2007
Regards,
Jorge Diogo

Critical program error in BEx designer when open the workbook

problem is coming related to Workbook.when i m opening the workbook then busiess explorer giving the error messgae i.e * A critical program error has occured. The program will now terminare.please refer to the trace for further information * kindly please provide the best solution for this problems.

hello , I got the same error while opening a workbook, and I found that this is happening coz I made some changes in Query structure contained into workbook.
So when you are opening and inserting the input variable do following things:
1.Open the workbook and insert the variable, but do not click "OK" just click on "CANCEL",
and your Workbook will display without data .
2.Now go to "Design Mode" reinsert the query by refreshing dataprovider(data analysis grid), and do the changes if you required and exit design mode,
3. Save workbook and now insert the variable values and check the work book will work without any error.
Thanks Hope it will help, coz it helped me.

A critical program error has occurred. BEx Analyzer. Cannot find trace file

I have now spent about 20 hours trying to resolve this issue. I receive the following error message when attempting to open any BEx Query: u201CA critical program error has occurred. The program will now terminate. Please refer to the trace for further information()u201D. Iu2019ve provided a video example of the scenario (couple minutes long): http://www.altnetwork.net/misc/Analyzer%20Critical%20Error.html
I cannot find the trace file in the standard C:\DOCUME1\BaldwiJE\LOCALS1\Temp\BexAnalyzerTrace.txt path. I cannot set/change the path/name of the trace file because the Trace File Name text box is grayed out (disabled) in BEx Analyzer > Global Options (see the above flash video link). I know that I am using the same Business Explorer and GUI build as my colleagues and I am able to login with my ID on their machines and not receive an error. We are using SAP BW 7.01 and I am using Excel 2007. I have entirely reinstalled Microsoft Excel, and the SAP Frontend including Business Explorer and SAP GUI. Iu2019ve monitored using both windows process monitor and windows process explorer but nothing is readily apparent as an issue (glad to share the process information if someone thinks it might help). No relevant event logs in the Windows event viewer.
Per the sapbexc.xla file, my system configuration is as follows:
Computer Name:      DEN-SSI-SYS-L61
File Location:      C:\DOCUME1\BaldwiJE\LOCALS1\Temp\sapBEX_PC_0614_103147.xls
Check done on:      6/14/2011   10:31:47 AM
Excel Version:      Excel 2007 (12.0.6535.5002)
Windows Version:      Windows 2000 (2195) Theme: %SystemRoot%\resources\Themes\Windows Classic.theme
Default Browser:      Internet Explorer (7.0.6000.17093)
SAP GUI:      720 Patch 1

Resolved! It actually seemed to be related to my windows profile. I notice that if a co-worker logged into windows on my machine that he was able to run the same BEx queries that I couldn't. I renamed my profile folder at c:\documents and settings\<myaccountname> to ...<myaccountname.bak>. I did this using a local administrator account on my computer. Then I logged back in to windows using my AD credentials. A new profile was created and then I was able to use BEx Analyzer again.
I also went back and tried to reload everything from my .bak profile into the newly created folder under documents and settings and hoped that I could isolate what specifically was causing the issue. However, even after moving everything over to my newly created profile I could not get the error to generate again. Sorry.
Highly recommend to anyone with the same issue that you confirm that a new profile works by a) having someone else login to your computer who has not already logged in before b) if that works, replace your c:\documents and settings\<myaccountname> folder.
Thanks to all who offered support.
Jerimiah

BEX Critical Program error in Analyzer

Hi,
When Im trying to open a workbook from the Anayser: Im getting the foll error:
A Critical program error occured. Program has to be closed. please refer to trace.
Im trying to open the query from the Favourites as well as Roles.
The same query i was able to view in another system.
System Info:
Microsoft .NET framework 2.0
Microsoft Excel 2003 , SP2
Software Component: SAP_BW
Release : 700
Level : 0013
Highest Support Package : SAPKW70013
Short Desc of SW component : SAP NetWeaver BI 7.0
SAP Logon for Windows : 710 Final Release
File version: 7100.1.3.1029
Build : 919412
Patch Level : 3
Pls let us know if I need to install any other components.
Regards
Syam
Message was edited by:
Syam K

Hi,
I have observed the following now.
I have uninstalled GUI 710 and re-installed it and Bex version was BI Addon 7.X, SP0, Rev 461.
Now, I have installed GUI patch 1 and 2 consecutively and restarted the system.
What I have observed is that the tool bar is not activated in Bex Analyzer and Im not able to open the Workbook. Can you pls advise on the same.
Rgds
Syam

Error with BEx Analyzer to open

Hi,
I am facing with this error message with the BEx Analyzer (Office 2007) when trying to open any query.
" A critical program error occured. The program has to close. Please refer to the trace for further information".
The patch level of GUI is 5(SAP GUI Final Release) and patch level of BEx Analyzer Support Package 0, Revision 461.
I really tried many different options from SAP Notes etc, but did not work. Please let me know if there is anyone faced with this situation or anything that I can do?
Reward points will be assigned.

Hi Kumar,
The critical program error means the frontend installation is not proper.
You need to check the frontend installation as per note 918394 and ensure that all the dlls are green and the frontend patch is latest.You can use GUI 640 with BI 7.0 frontend.
Which front-end version you are using.The frontend patch level is found in the BEx Analyser -> BEx Tool-Bar
-> yellow question mark -> Help -> About => Version <xx> Patch <xx>
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply the latest patch..1600
This should resolve the issue..ensure .net and other prerequisites are installed as per note 877774.
Rgds
Manoj Kumar

Fehler : Critical Program Error

Dear All,
We are facing this issue with couple of users from last 2 weeks.
It came suddenly on their machines
Error is :
Fehler : Critical Program Error
at com.sap.bi.et.analyzer.addin.BExMenu.Create ()
at com.sap.bi.et.analyzer.addin.BExMenu.CreateBExMenu ()
at com.sap.bi.et.analyzer.addin.BExConnect.SetExcel (Object Excel)
This comes when the users tries to access Bex Query and WB through analyzer.
1. We have reinstalled SAP but that is not helping.
2. We have given new laptops to users but that is also not helping for them.
3. There is NO new installation or Security patch added on their Laptop from past few days which might cause this error.
Please respond if you have any idea on this.
Regards,
Den

Hi,
Follow this thread,you might get answer.
Bex CriticalProgramError
Fehler: CriticalProgramError
@AK
Edited by: Ashok KUMAR on Mar 29, 2011 4:46 PM

Workbook -Critical Programe error

Hi Experts,
when we are trying to open a workbook in BI 7 analyzer we are getting the the bellow error message.
"critical Programe error and disconnection from BW Server"
We are at Support pack level 17 and we are using SAP GUI 710 with patch level 8.
Please respond if you have experienced the same.
Thanks
DB

Niyati,
That hotfix can run only to the 640, even we have the same problem over here. Actually you should not upgarde the front end patch if you want to install. But that hot fix might run or may not run, you may get issues later with the GUI..
All these probles will cause becoz of frontend patch... If you are at patch 27 then you need to unistall and come back to the same patch level as your colleague has... actually i dont know how to unistall that patch.. Or else try out with frontend patch 28...
Hope it helps..
Assign points if it helps
Gattu

A critical program error has occured while opening workbook

Dear friends,
A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
"A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
However,i did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
Thankx a lot in advance!!!
regards,
Sandeep Singla

The machine where the workbook is opening has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.7.1038
Build : 967944
Patch Level : 7
and the machine where the critical program error is coming has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.8.1039
Build : 983952
Patch Level : 8
The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
Any help will be appreciated.
Thanks and Regards,
Sandeep Singla

A critical program error occured when running a workbook

Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
Ivan

Hi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers.

Error in BEX Analyzer

Hi,
When i try to execute or open a query with characterstics it works fine but when i execute or open the query with keyfigures then gives me the error critical program error closing the program for further information see the trace
when i go to RSRT & execute the query it is showing me the Keyfigure data
we are in Netweaver 2004s with support pach 710
Thanks
Maya

Hello Maya,
Please record a trace as per the following details and post the results to help you better
You can record a front-end trace as follows:
1.) Start BExAnalyzer
2.) Go To Global Settings
3.) Go to the trace tab
4.) Check "Record Trace"
5.) Close the dialog
6.) Close BExAnalyzer
7.) Reproduce the problem
After the "Critical Program Error" popup appears you find a file
BExAnalyzerTrace.txt in the %temp% folder.
Regards,
Sheik Bilal

Error using BEx Analyzer - tools - 'copy sheet' function

Hello,
We are getting an error using BEx Analyzer, when we execute a query or workbook and select the 'copy sheet' function. The error is:
An error occurred when communicating with the BI Server
As a result of this the system has been disconnected from the BI server.
Exception Condition 'BAD_VALUE_COMBINATION' raised.
We are using BEx Analyzer 7.10.
Thanks very much.
Gayle

Hi
Implement this note first
Note 1086904 - BW 7.0 BEx: Transactions RRMX/RRMXP
in case if nottting works
Run the Same query in RSRT transaction code , see if you get the same error.
if you get the same error.
Go to RSRT give the query name and Generate the query (using generate button in RSRT)
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 31, 2009 5:44 AM

A critical program error has ocurred in workbook after modif structure

Dear all,
I have a Excel Workbook with one query. This query has a structure. I have exchanged a structure for other one. From this moment when I try to modify the workbook or run it, the system returns next message: "A critical program error has ocurred, The program will now terminate. Please refer to the trace for further information".
Does anyone any idea about this issue?
Thanks in advance.
Sebastian

hi,
When I have clicked "design mode" system returns the same error.
Sebastian.

A Critical Program error has occured while Save workbook

A Critical Program error has occured while Save workbook in SAP BI everytime. Anyone can give me solution for this problem.

Hi Gaurav,
Please look at this thread.
A critical program error has occured while opening workbook
Hope this will solve your problem.
Regards,
Javed

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
   Dim lRange As Range
   Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
    onAction = True
    onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
    onAction = True
    Call Sheet4.BUTTON_55_Click
    onAction = False
End If
exit_handler:
    Exit Sub
err_handler:
    MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
    Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

"Critical program error" in BEx Analyzer due to missing BExCompression

Similar Messages

Maybe you are looking for