CRITICAL:  Program Error - iTunes window does not fit properly on my screen...

Hello,
I have just installed the iTunes update and now I have a problem.  I have my task bar at the TOP of my screen, rather than at the bottom, which is more common.  Now, iTunes has written its own window into the area where my task bar would normally reside.  Not only that, but it is UNDER the task bar, so I cannot access it without auto-hiding the task bar.  Even when I do this, and resize the window, the iTunes Window goes back to taking up the full screen, except for the fact that it leaves a blank space at the bottom of the window, presumably for the task bars that are on the bottom.
How can I get this to be fixed, NOW???  I have just decided to start using iTunes regularly, outside of my normal iPhones usage, for music management.  I'm wondering if I should re-think this decision!  Help.
~Antonio

My igoogle homepage started loading off-center. I could hit "refresh" and it would then load properly, but I wanted it to load correctly from launch.
After disabling add-ons (extensions), I discovered that the SKYPE extension was to blame. I uninstalled the extension and now the homepage loads correctly...centered.

Similar Messages

  • My igoogle homepage does not fit properly on my screen

    I use igoogle homepage and the layout does not fit. It is minimized currently to get the "firefox tab" at the top but the left side is only half visible.

    My igoogle homepage started loading off-center. I could hit "refresh" and it would then load properly, but I wanted it to load correctly from launch.
    After disabling add-ons (extensions), I discovered that the SKYPE extension was to blame. I uninstalled the extension and now the homepage loads correctly...centered.

  • ITunes (Windows) does not quit properly

    Closing windows version using "x" at top right corner of screen or selecting Exit from file menu makes iTunes clear the screen, but it's still runnning.
    I have to do a ctrl-alt-del and then manually quit the process tree.
    Otherwise, re-clicking on the iTunes shortcut or even doing a "Start->iTunes" will get you a spinning clock and then nothing on screen.
    Windows task manager will claim it's running, but there is no interface.
    Sometimes Windows shutdown is hung up because a program named (looks like about 20 open boxes but with an iTunes logo) is running, but will not quit.
    itunes Mac on same network connection works flawlessly.
    Any suggestions?
    Win/Mac Mini Windows XP

    Could be antivirus or malware, have you checked your PC for Viruses and ad/spyware? Also try disabling antivirus. you could run a check on windows and see if some files in windows is corrupt by running chkdsk/ error checking.
    Open "My Computer" rightclick on your harddrive, hit properties and select the "tools" tab. under "Error Check" hit check now. you wll get a pop up basicly saying it will run when you reboot or something like that. hit OK and then reboot. the program will run after booting up, and when its done it will load windows.

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • CS5 - Error 22:Window does not have a constructor

    I've been experimenting with some old sccripts on the Photoshop CS5 pre-release and they seem to work fine except any that have a user interface.Scripts that run fine on CS2, CS3 and CS4 throw a "Error 22:Window does not have a constructor" error message. I was wondering if anyone else had noticed this and if they were aware of any changes as regards to scripting with CS5 and also how to correct the issue.
    CJ

    Dear All,
    I have been bothered by this same  Photoshop error 22 when trying to use the Photomerge feature or any  other of the Automate features in CS5.
    My computer is a  Windows 7 32bit machine but this should definitely apply to Windows  64bit machines and possibly the same logic may apply to Mac but I do not  know.
    I didnt find a permanent solution but I did find  a temporary fix which will at least allow you to use the function for  one opening of the program however if you close and reopen photoshop the  problem returns.
    Temporary Fix Instructions:
    1.  Locate the file "Adobe Photoshop CS5 Prefs.psp" on your computer and delete it or move it elsewhere.  (I assume by  doing this you may lose *** of your photoshop preferences but it will  allow you to use photomerge and HDR so you choose)
    2. On Windows this file can be found in the User folder under C:\**USER NAME**\AppData\Roaming\Adobe\Adobe Photoshop CS5\Adobe Photoshop CS5 Settings\ (Replace **USER NAME** with the Windows 7 account user name)
    3.  After deleting this file or temporarily moving it out of that folder  you can then open Photoshop CS5 and use the Photomerge feature as much  as you'd like.
    4. As soon as you close Photoshop CS5 the program automatically makes a new Adobe Photoshop CS5 Prefs.psp file so when you try to reopen the program it will not work again.
    I  hope this may be helpful to some people and I hope that Adobe can fix  this issue, I have not and dont plan on submitting this as a bug report  to Adobe, being that I do not personally own the program (still in 30  day trial) but anyone who would like to, please feel free to do so.

  • PSCS5 Error 22: Window does not have a constructor.

    I am having a problem running scripts in PS CS5.
    When I try to run the load files into stack script, which works fine on CS5 on my laptop running Windows 7 64bit.n (i7 Processor, 4gb Ram)
    I am running the same operating system on my main pc (i7 Processor 6gb ram), and am using the 32bit version of PSCS5.
    For some reason however I get the following error when trying to run the load files into stack script.
    Error 22: Window does not have a constructor.
    Line.388
    ->         var w = new Window(res);
    I have tried trashing my preferences and reinstalling photoshop but neither has worked.
    Any suggestions on how to fix would be welcome.
    Regards
    Robyn

    Something similar has come up in the Mac-Forum:
    http://forums.adobe.com/message/2982064#2982064
    Might not be of use to you, though, but it seems to have been solved somehow …

  • Error 22: Window does not have a constructor.

    Hi
    I am getting the following error message when I try to run scripts in PSE11, including the PSE scripts like PhotoMerge. I have tried reseting my preferences, rebooting my mac, rebuilding the db3 file, and reinstalling the action. None have worked. These actions did work before. Does anyone have any experience or advice to offer on this one please? Thanks, Jo
    "Error 22: Window does not have a constructor.
    Line: 30
    -> var dlgwin = new Window('dialog', 'Supply Tracker',);
    This arises when running the CDW Supply Tracker script, which was working fine.
    thanks in advance, Jo

    I seem to have fixed this by deleting the preferences.  At first holding cmd-opt-shift whilst starting PSE editor was not giving me the delete preferences option, but I found there was a sneaky version of PSE editor running and hiding on my mac, and once I forced it to quit, and restarted the Mac, I was able to use the above way of deleting the preferences. 

  • Error 22: Window does not have a constructor. when opening photomerge . panorama ??????

    Whats up???   Error 22: Window does not have a constructor. when i select photomerge / panorama on my imac.    ( elements 11)

    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    One of the similar threads is found here http://forums.adobe.com/thread/622755 which is for Photoshop but should work for PSE as well.
    Thanks,
    Garry

  • When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    Did you install BC drivers on the Windows side?

  • Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

    Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

    Hi Stephen,
    What version of MS Office are you using?
    Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
    Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
    From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
    The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
    • Outlook.com SMTP server address: smtp.live.com
    • Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com SMTP password': Your Outlook.com password
    • Outlook.com SMTP port: 587
    • Outlook.com SMTP TLS/SSL encryption required: yes
    For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
    The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
    • Outlook.com POP server address: pop3.live.com
    • Outlook.com POP user name: Your full Outlook.com email address (not an alias)
    • Outlook.com POP password: Your Outlook.com password
    • Outlook.com POP port: 995
    • Outlook.com POP TLS/SSL encryption required: yes
    Regards,
    Rave

  • Itunes still does not fit on my screen.  How can I make this happen?

    Itunes does not fit my screen so I cannot even see the scroll bar.  Can I fix this?

    I asked the same question a couple of days ago.  Today I read a similar post and read that there are sync issues with a 5C do two things power down the computer, make sure that no applications are running on the 5C.  When the computer restarts it will connect to the 5C after the drivers install.  At least this worked for me. I am using Windows 7, iOS 7.0.4, and iTunes 11.1.3.8 .

  • Itunes window does not open

    running itunes 8 on 2.4ghz osx 10.5.5 imac.
    when i open itunes the application opens but the window does not nor can i get it to open. when i initially click on itunes to open it the curser blips to the opening egg timer for about 1 quarter second but the window does not open. the menu bar opens and all drop downs appear but no window.

    I had this happen too. go to system preferences and move the dock from it's current position. I found the itunes window was under the dock...

  • ITunes Window does not display correctly

    Hey,
    I've just done the update to 10.6 and now I've started iTunes again and the windows doesn't fit in m y screen... is there a utility or fix for this i already tried removing preferences from my personal directory.
    See picture below for a screengrab
    http://i178.photobucket.com/albums/w251/JajeBlade/Stuff/Schermafbeelding2009-08- 30om161406.png
    Message was edited by: JajeBlade

    Hold the Option key and click the green jelly at top left.

  • Itunes window does not have show menu or import

    Hi I am on home sharing with my daughter, but itunes will not let me drag or import from her itunes account.
    I have checke the help pages, it says to go to the show menu at the bottom on the itunes window ? I don;t have show menu at the bottom could it be somewhere else? or is there a problem with my itunes

    Sally, Funny that you mention this but my mac book pro started doing the same thing after the leopard 10.5.1 update. Has to be a software bug and I have not seen any other post relating to this.
    MV

Maybe you are looking for