CRM 2007 - Employee Work Type
Hi Gurus
When viewing an Employees details in the Account Details of the WEB UI.
In the heade section there is an area call Worked, in this section is a Label "Type" with a Drop Down.
What is this field used for and when do I configure the drop down as it is currently empty.
I could not locate any documentation on this subject.
Many Thanks
Panduranga
Hello Panduranga,
Are you using any HR backend system?
Because as far as I can see, this field is relevant for HR integration scenario only... Kindly check the following method:
CL_BUPA_IL_EMPLOYEE_HEADER~READ
You will see line 241 that this field is retrieved via RFC call to your backend system... so I guess the corresponding value help is retrieved in the R/3 system too. In other words: It is more likely that you cannot you use this field without a connection to HR.
Regards,
Nicolas Busson.
Similar Messages
-
CRM 2007 Upgrade - Component Type is Missing in Structure
Hi,
we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
we implemented sap note 0000817539 & 0000643510, but still no success.
any lead is really appreciated
JDDear JD,
hopefully you have already solved your problem. If not perhaps the following information is helpful:
These Function Modules are created when the Sbdoc is generated
using the report CND_MAST_GEN_TRANSFER_OBJECTS.
Please check if the Sbdoc is generated correctly in your system or not.
You can check this in transaction SBDM.
The Sbdoc name is CNBCRMPRSAP005.
If the Sbdoc is not created correctly please use the report above to
generate and activate it.
In any case if the problem is solved, please close the thread!
Regards, Gerhard
Moderator -
Getting error type RABAX_STATE in CRM 2007 Webclient
Hi,
We have installed CRM 2007 and upgraded the patchlevel of BBPCRM to SP2. After the patch upgrade we are getting type RABAX_STATE error after we log in through Webclient. We get no errors while logging through SAP GUI. Before the upgradation we were successfully able to login through Webclient. The details of error screen is as follows:
Error when processing your request
What has happened?
The URL http://coevhpa4.coekc.com:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CR7 : Syntax error in program CL_BSP_WD_CONTEXT_NODE_TREE===CP .
The error occurred on the application server coevhpa4_CR7_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_ELEMENT~RUNTIME_IS_VALID of program CL_THTMLB_CELLERATOR==========CP
Method: IF_BSP_PAGE_CONTEXT~ELEMENT_PROCESS of program CL_BSP_PAGE_CONTEXT===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CR7 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server coevhpa4_CR7_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server coevhpa4_CR7_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: SUMSENGU -l: E -s: CR7 -i: coevhpa4_CR7_00 -w: 2 -d: 20080422 -t: 021218 -v: RABAX_STATE -e: SYNTAX_ERROR
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Request you to kindly help ASAP. Users are waiting for it...
Thanks and Regards,
Suman SenguptaHi,
Have you resolved the problem ? We have encountered similar problem after patching the
CRM 2007 to latest levels?
Please help....
Thanks & Regards,
Bostjan -
Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows
Hi,
I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
System cannot connect the database?
Here is dev_w0 file contets:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid XCR
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2260
Sun Nov 16 16:56:01 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Nov 16 16:56:06 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ESITV016LAB_XCR_01 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sun Nov 16 16:56:07 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Sun Nov 16 16:56:47 2008
ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:56:57 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Nov 16 14:56:57 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1608 Ended no 1 0 0
1 DIA 3940 Ended no 1 0 0
2 DIA 636 Ended no 1 0 0
3 DIA 3484 Ended no 1 0 0
4 DIA 3504 Ended no 1 0 0
5 DIA 1108 Ended no 1 0 0
6 DIA 3512 Ended no 1 0 0
7 DIA 3592 Ended no 1 0 0
8 DIA 3616 Ended no 1 0 0
9 DIA 3608 Ended no 1 0 0
10 UPD 3368 Ended no 1 0 0
11 ENQ 1388 Ended no 1 0 0
12 BTC 3276 Ended no 1 0 0
13 BTC 1256 Ended no 1 0 0
14 BTC 3400 Ended no 1 0 0
15 SPO 2376 Ended no 1 0 0
16 UP2 3032 Ended no 1 0 0
Dispatcher Queue Statistics Sun Nov 16 14:56:57 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Sun Nov 16 14:56:57 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Nov 16 14:56:57 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:02 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ESITV016LAB_XCR_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4076) (SOFT_KILL)
Stop icman
killing process (3800) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4076 HANDLE:388)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4076 HANDLE:388)
wait for end of icman
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3800 HANDLE:396)
DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01 <)
NiIMyHostName: hostname = 'ESITV016LAB'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Nov 16 16:57:15 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 312 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 312 (pos=2)
SiSelNRemove: removed sock 312
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 312
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c 10421]
Good Bye .....
BR,
KariHi,
here is the right log content:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Nov 17 10:24:39 2008
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M sysno 01
M sid XCR
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2184
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Nov 17 10:24:40 2008
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Nov 17 10:24:41 2008
M ThInit: running on host ESITV016LAB
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Nov 17 10:24:41 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c 327]
BR,
Kari -
CRM 2007 : Diff. Transaction Type = Diff. Configuration
Hi,
I'm working on CRM 2007 Web UI. I want to have a diffrerent configuration for different transaction type with the same business object type.
i.e. service order 1, ZSR1 and service order 2, ZSR2 must have different configuration on the web UI.
Does someone know ?
thanksI solved by myself.
You do this by copying your configuration. While you are copying the configuration you must give as parameters :
1. Your Role Configuration Key (if you are using one)
2. Object Type (e.g. BT116_SRVO)
3. Object Subtype (e.g. ZSR1 or ZSR2)
Then you can configure it diferently.
hope this helps others.. -
Hi,
I want to implement some work flow related activities in CRM 2007. Can I implement this using Guided Procedures in CAF or workflow ? Which is the better way? pls suggest..
Regards,
AjayAjay,
Your question is a little vague as you don't have a business scenario for your workflow related requirements.
I will say that if the workflow process does not involve switching out of CRM and only involves steps in CRM, then traditional workflow will work fine. If you need to do something where the steps involve multiple systems then guided procedures would be a better solution.
Perhaps if you share more of your scenario you will get some better ideas on how to go about it.
Take care,
Stephen -
Business role customizing not working in crm 2007 web client
Can someone tell me what services need to be activated via sicf for business role customizing to work in the Web Client under the Administration component in CRM 2007. I have everything else working in this are eg surveys, document template, fact sheet configuration, view configuration but the business role customizing when selected just opens a blank screen
Thanks in advance
EddieHi Eddie,
The SAP CRM 2007 Master guide suggests enabling all the SICF services in the SAP namespace.
We had some script errors in CRM UI, but once all the SICF services were activated, they simply disappeared.
The IDES demo systems are also set up this way, so you can try doing it.
Regards,
Padma -
CRM_ICWC_TEST parameter not working in CRM 2007
Hi,
In previous CRM versions, we have been able to get the view name to show up in the mouse hover text by adding the CRM_ICWC_TEST parameter with a value of 0X23456789 to our users. In CRM 2007, I am not able to get this to work. Has anyone else been able to?
As always, I promise to reward all useful answers.
Thank you,
JohnHi John,
In CRM 2007, it will be more easier than CRM_ICWC_TEST parameter.
If there is an TEXT box or table grid, you may put cursor in the TEXT box, or select the row of the grid, and press F2, then you will have a popup with all info you needed, more than the view info itself.
For example, in IC Webclient, Service Orders, Overview,
If you put cursor in Description text box, press F2, you will find
Component = ICCMP_BTSHEAD
View = BTSHeader
Something like this.
Then you will be able to display the configuration in
transaction bsp_wd_cmpwb, by enter component, and Display button.
Then expand the view folder, and find the BTSHeader.
CRM 2007 has quite different structure. Thus we might have to do things bit differently.
Hongyan -
Substitute Controller doesn't seem to work in CRM 2007
Hello,
In previous versions of CRM, we were able to copy a controller and view to our own BSP application, and configure the CRM framework to substitute our controller for the standard SAP controller when building the ICWC page. Within CRM 2007, this no longer seems to work. The CRMC_IC_RTFRAMEWORK transaction now contains text for that says "Substitute Controllers for Global Custom Cont." instead of "Controller Substitutes." Does this mean that this feature only works on custom controllers now?
Thank you for any insight you may be able to lend. I promise to reward all useful responses.
Thank you,
Johndid you get my earlier message? Here's what I wrote;
I also meant to add the way the instructor for the course showed how to
write the code
for example; home_btn.addEventListener(Mouse...................) as so
on You mention no period after the btn unless a width or something how
could I change the code to be proper.
and also one for {
content_pg.gotoAndStop(2);
same period example. should there be a space and no period after home_btn?
thanks again for your assistance.
mike
On Wed, Aug 27, 2014 at 7:00 PM, -mikey1969- <[email protected]> -
Dowloding product attributes / set type to Master Data in CRM 2007
We have created set-type and attribute in txn:COMM_ATTRSET.
Created set-type and assign attributes to them,you need to assign set-type to categories in txn:COMM_HIERARCHY by selecting the category.
And then you assign category to a product and hence your set-types are available to that product.
We are maintianing Attribute for COMPETITOR PRODUCT ( MAT_ZCPT as Category Hierarchy ). All Attributes are assigned to Competitor Product and Relationship is maintained with company Product .
What BApi or BAdi shgould be used .
When we are implementing BDC , SAP says from CRM 2007 they are not supporting GUI . Use existing BApi .
But we want to download more than 5000 Products . Please guide .
Regards,
Anup RecheHi Anup,
use the following bapi ;
BAPI_PPR_MAINTAIN:-This method allows the independent maintenance (create/change) of the following objects of Partner/Product Ranges (PPRs):
BAPI_PPR_MAINTAIN_40:-This method allows the independent maintenance (create/change/delete) of the following objects of Partner/Product Ranges (PPRs):
Badi:
PRODUCT_UPDATE2 -Obsolete: Create or Change Product
hope it will useful.
thanks
Hemant ghiya -
Campaign Automation not working in CRM 2007
Hi folks,
I created a Campaign in CRM 2007, saved it and when I click on Campaign Automation button, it just opens up a blank grey screen with an 'x" mark on top left. Can anybody tell me what could be going wrong. I am using IE 8.0 and the SAP GUI with patch level 17.
Thanks in advance for help!!
JohnHi Vivek,
Thanks for your response. Yes the note you provided solved my problem. Thank you.
Hey, I have a similar kind of issue while trying to create a Mail Form.
I search for a particular mail form, after finding it, I select and click on "copy" icon, then it gives me a pop-up where I give the new name and click on "copy" button. Now it takes me to a new Mail Form screen.
My issue is, on this New Mail Form screen when I click on "save" button, I get "error on page" at the left bottom task bar.
And if I try to do anything else on this page, the error is the same and no click works. As a result, I could not save the new Mail Form. Can you advise, what could be the reason for this IE error??
I updated java applets and using IE 8.0. Still the same.
Regards,
John -
Header UI 2007 not working + Time-out CRM 2007
Hello,
We are currently installing CRM 2007 as a standalone. However we encounter 2 problems:
1. De header menu (personalize etc) is not working. Clicking on those links has no effect at all
2. When starting a functionality (e.g. account management -> accounts) we get a time-out after 60 seconds. Probably because SAP is compiling the screen for the first time. How can we adjust the time-out settings?
Thanks!Sander,
The timeouts are controlled by profile parameter settings for the ICM. You can use the parameters listed below to control these settings.
icm/keep_alive_timeout - seconds
icm/conn_timeout - msec
icm/max_timeout_net - msec
icm/min_timeout_mpi - msec
rdisp/plugin_auto_logout - seconds
I would strongly recommend however that you SGEN your entire system before using the new CRM webclient. You still can time out even with the parameters above set to generous values.
Take care,
Stephen -
Authorization restriction for CRM 2007
Dear Experts,
We are in process of defining the authorization matrix for CRM 2007 for end users who will be using Web UI.
Here my requirement is the service orders created by USER1 should not be displayed by USER2 and vice-versa when they do a search in both Web UI and GUI in Tx CRMD_ORDER for service orders.
Please let me know how can I acheive this and what is the auth. object for the same.
Thanks & Regards,
SharathDear babu,
If I understood your request, you want that, only one user will be able to access the document. If you want to do that, this is the answer:
At tcode PFCG you shoud set:
First you must set what type of document will be avaible to the user, in this case Z020.
CRM_ORD_PR: PR_TYPE 'Z020',ACTVT '*'
Next you must set which activities they will be able to do (notice, you must set the same field in the previsou object(
CRM_ACT: ACTVT u2018*u2019
And then you set which partner function or partner category are able to access the document, here is the main point !
In this example I set that only users who has Partner Category (not partner function) Employee Responsible (std partner category 0008) are able to access the document
CRM_ORD_OP: ACTVT '', PARTN_FCT '', PARTN_FCTT '0008'
Here you can notice again field ACTVT, here you will set what user are able to do, "*" means everything, "1" = create, "2" = modify, etc. (I can see the list at PFCG, adding the auth. object to the PFCG profile).
I notice only std partner function or partner category works with this object. I sent a message to sap support, and they confirm that, so if your user has Z partner funcition or category it is not possible to do that.
Summary, your user must be present in the partner list of the document, and they must have a partner function or partner category std. It is possible to set together both values PARTN_FCT and PARTN_FCTT, but I think it is not necessary.
The easy way to do that is, user who will be able to access the document, must be the employee responsible.
This help is very usefull
http://help.sap.com/saphelp_crm60/helpdata/en/4a/b9f63a8ab2c745e10000000a114084/frameset.htm
Regards,
Lalas
ps.: As you should know, only one partner function must have partner category Employee Responsible, in the partner det. procedure, otherwise, you will get error message in your application. -
Sap CRM 2007 Security related issue
Hi All,
I am working on SAP CRM 2007 security.
I have scenario, which we are trying to fix.
There are two users A and B.
A is assigned to role X
B is assigned to role y
Business Partner 123 is created for user A
Business Partner 456 is created for user B
These Business Partners are assigned to Authorization Groups.
See below:
1)Authorization Group (LK01) is assigned to Business Partner --123.
2) Authorization Group (LK02) is assigned to Business Partner --456
3) Authorization groups LK01 is assigin to user A in PFCG role X
4) Authorization groups LK02 is assigin to user B in PFCG role Y
a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
Note:
1) Authorization Groups are assigned to BPs under the Control tab.
2) These Auth Groups are assigned in Authorization Object in PFCG role.
Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
User A can open the Interaction History and edit the Service Order created using the BP 456.
He can Edit the following in Service Order details:
1) General Data Status (from created to complete), Contact person, Sale Rep name.
2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
3) Business Partner.
However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group" which is a
good thing.
I have tried to be precise, please let me know if you require more information.
Regards,
Dave.I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant -
Error while building B2B for CRM 2007
Hi All
I am trying to make few changes in B2B application for CRM 2007.
I have created projects for crmisawebb2bsap.com and crmhomeshrextsap.com
But whenever I try to build anyone of them.
There is a error.
Build log -
Development Component Build (2009-07-28 12:14:18)
Component name: crm/b2b_2
Component vendor: sap.com
SC compartment: sap.com_SAP-CRMAPP_1
Source code location: http://xxx/sap.com_SAP-CRMAPP/dev/inactive/DCs/sap.com/crm/b2b_2/_comp/
DC root folder: C:\Documents and Settings\.dtc\4\DCs\sap.com\crm\b2b_2\_comp\
DC type: J2EE
DC subtype: Enterprise Application
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] ERROR: Check for used DCs failed: Cannot build because used component is broken: sap.com/crm/isa/web/b2b( sap.com_SAP-SHRWEB_1)
[dcmake] Build failed with errors.
Please advice me how to proceed.
Thanks
PratyushDid you find the issue? I'm trying to install binutils and the gcc toolchain on my laptop. I was able to get it to work (randomly) on my desktop a year ago (http://nakedproof.blogspot.com/2012/09/ … linux.html), but the same steps aren't working anymore.
Maybe you are looking for
-
How to change the default login page
Hi All, I got an issue with the login page. I want to display the Chinses as default, but now it's engish. I have changed the ICX: Language to Chinese at the site level, but it seems didn't take effect. And the parameter s_base_lang is still US in th
-
Problems with libclntsh.so.10.1 and PHP/Apache HTTPD
Hello, I've been wrestling with the install of Instant Client/OCI8 with PHP 5.0.4 and Apache HTTPD 2.0.52 on RHEL4 ES. Most recently I've followed the instructions detailed here: http://www.oracle.com/technology/pub/notes/technote_php_instant.html Ap
-
Yellow Spots on iPhone 5 screen
Hi everyone. As you can see from the picture, there's a faint yellow spots on the iPhone screen. The phone was purchased in December but the spots didn't appear until yesterday. I've resetted the phone using iTunes and basically ruled out this is a s
-
Agent cannot change to the requested state from current state
Hi all, I have a new setup using uccx 8 and ccme 8.1 . Everything seems fine exept from randomly agents stuck to a not ready state. When trying to go to a ready state we get the following error "cannot change to the requested state from your current
-
Delete the summarisation run in plant level
we runing the summarisation report from the t.code KKRS. it was fatch the wrong values now i want delete that one please let know the procedure . WIP Process Delete Settlement process delete Order hierarchy Process Delete with t.code any dacuments