CRM 2007 IDES
Hello Gurus
We have just installed IDES version for CRM 2007. Now I am able to access the new web UI as well for SALESPRO and SERVICERO.
But the issue is that when I launch sales transactions from GUI using CRMD_ORDER, I cant open any exisiting docs and get a short dump with following information:-
Error analysis
The following syntax error was found in the program SAPLCRM_CONDITION_COM_OW :
"The data object "CS_ACS_I_COM" has no component called "CLA_VALUE_DIST"
"R_CONTROL", but there is a component called "CLA_VALUE_DISTR_RELEVANCE"
If any one of you have come across this, could you please tell me the solution? I have searched OSS and didnt find anything relevant.
Also how do I know which master data and transactions are set up for use in sales scenarios. I have been trying to figure this out, but so far no progress. Will it is in the documentation CD that came with installation guide for IDES?
Thanks much
Jai
Hi,
We have exactly the same dump after migrating in CRM 2007, using crm_order both crmwebgui and sapgui.
(triggers by function module CRM_CONDITION_COM_INIT_OB)
Could you precise how to regenerate price related to field catalog?
Thanks in Advance.
Thomas
Similar Messages
-
Hi all,
we installed a CRM 2007 IDES-System.
Does anybody know where we can finde informations like:
Demoskripts
Customizing Guides
for the CRM 2007 IDES-System.
I´m sure SAP has configured some scenarios, but i was not able to find documentation for this as a customer.
Helpfull answers will be rewarded.
Thanks a lot
Best regards
ManfredHi Mannif,
There are two ways :
1. Download or order the SAP Best Practice for CRM2007. In the Best Practice, you can look at CRM Customizing and script building block, it is based on CRM IDES.
SAP customers and partners can download SAP Best Practices from the
SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc)
or order via their contracts department. SAP Best Practices are provided free of charge.
All interested parties who are not SAP customers, partners or employees can view the
SAP Best Practices documentation in the SAP Help Portal (http://help.sap.com/bestpractices).
2. There're a demo database in SAP WTS that contains the demo script for CRM2007 IDES.
http://xads.wdf.sap.corp:8000/sap/bc/bsp/sap/zidesinfobase/mainframe.htm
Who can access the Demo Database :
- Every SAP employee has access to the Demo Database.
- Customers or partners only have access when they are using their SAP_ALL User.
Hope this answer help. Please give point if helps. -
VM container error \jkit\jre\bin\cvm\jvm.dll on CRM 2007 IDES
Hello All
While activating the VM container on CRM 2007 IDES by setting following parameter
on instance profile
vmcj/option/ps = 512M
vmcj/enable = on
mcj/option/maxJavaHeap = 200M
vmcj/max_vm_heap_MB = 3672M
the dispatcher gets shutdown with following error.
<ES> 127 blocks reserved for free list.
ES initialized.
ERROR => DlLoadLib: LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
LOCATION SAP-Dispatcher wicomp05_C26_02 on host wicomp05
ERROR Java not available
TIME Mon Mar 10 20:54:27 2008
RELEASE 700
COMPONENT Java VM Container
VERSION 1
RC 11
MODULE vmcjxx.c
LINE 859
DETAIL cannot load library
F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll (rc=-2)
COUNTER 6
ERROR => DpVmcInit: cannot load vm [dpxxvmc.c 196]
DP_FATAL_ERROR => DpSapEnvInit: DpVmcInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
When analyzing the error
LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
It seems like the jvm.dll in the jkit directory is not valid.
LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
As per the Note 901294 it is specified
The jvm.dll library in the $(DIR_EXECUTABLE)\jkit\jre\bin\cvm\ directory was not delivered with kernel patch levels 31 and 32,.
The same problem can also occur generally if you forget to implement the VMC components (cfw and jkit directories) for any kernel patch.
So do you think we need to update the VMC components in jkit directory?. But my kernel patch number is 52 and Support package level 12, so the above note is not applicable for us. Can you guys let me know how we can update the jkit directory or any other steps to fix this jvm.dll issue.
I will reward full points for responsesGuys
Solved the issue. As I said cfw and jkit directories were missing on crm2007ides kernel directory. I downloaded the kernel 7.00 133 and verified that jkit and cfw directories are present and then upgraded the kernel.
Now the instance is starting and VM container is also working
Edited by: Sahad K on Mar 20, 2008 7:05 AM -
Installation problem in CRM 2007 Server
Hi All,
Installation of CRM 2007 IDES giving the trouble at importABAP phase. The installation is going on Windows 2003 server 64 bit, on Oracle 10.2.0.1.0 and J2SDK-1.4.2_17..
It finished 17 steps out of 19, 1 failed and 1 is waiting..
I done some changes, still it is directly going to the failed step(old installation). How can i start from 16th phase of importABAP.
Otherwise is there any way to solve this, I tried from <SID>adm account also still it is giving the problem..
Thanks & Regards,
Sridhar.This is the sapinst.log
INFO 2009-03-05 14:46:30.328
Connection request to guiengine backend by host 192.168.1.124.
INFO 2009-03-05 14:46:38.296
Copied file 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/inifile.8.xml'.
INFO 2009-03-05 14:46:38.359
Copied file 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/inifile.9.xml'.
INFO 2009-03-05 14:46:40.687
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2009-03-05 14:46:57.203
Copied file 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/CRM2007/SYSTEM/ORA/CENTRAL/AS/keydb.5.xml'.
INFO 2009-03-05 14:46:57.375
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0
INFO 2009-03-05 14:47:02.671
Switched to user: crmadm.
INFO 2009-03-05 14:47:02.718
Creating file C:\Program Files\sapinst_instdir\CRM2007\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2009-03-05 14:47:02.734
Switched to user: crmadm.
INFO 2009-03-05 14:47:02.734
Working directory changed to C:\Program Files\sapinst_instdir\CRM2007\SYSTEM\ORA\CENTRAL\AS.
INFO 2009-03-05 14:47:02.750
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs D:\cd1\Export1\EXP1;D:\cd2\Export2\EXP2;D:\cd2\Export2\EXP3;D:\cd2\Export2\EXP4 -installDir "C:\Program Files\sapinst_instdir\CRM2007\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\CRM\SYS\exe\uc\NTAMD64\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2009-03-05 14:47:02.937
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs D:\cd1\Export1\EXP1;D:\cd2\Export2\EXP2;D:\cd2\Export2\EXP3;D:\cd2\Export2\EXP4 -installDir "C:\Program Files\sapinst_instdir\CRM2007\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\CRM\SYS\exe\uc\NTAMD64\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 2. Output:
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Required system resources are missing or not available:
DDL control file 'C:\Program Files\sapinst_instdir\CRM2007\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' does not exist.
ERROR 2009-03-05 14:47:02.937
CJS-30022 Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-03-05 14:47:03.0
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2009-03-05 14:47:22.0
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor". -
SSO from CRM 2007 to ITS of R/3 4.7.
Hi Experts,
We are using CRM 2007 interaction center.
We have provided some links to R/3 transaction using transaction launcher.
Now we need to implement SSO to the R/3 system.
We are using Standalone ITS 6.20 system to connect to R/3 from Interaction Center.
Please help us with configuration steps for SSO.
Is there any way to achieve this without using PAS?
Systems:CRM 2007.
ITS :ITS 620
R/3 :4.7 EE
Please advice.
Thanks,
Adi.Dear Tob,
yeah You are right.
I am using R3 4.7 EE (i am using SAP IDES) and It's Server is 6.20.
so this version does not have Internal ITS ?
Are u suggesting me to go for Standalone ITS then ? Pls give me elaborate reply.
If u have any documents for both the ITS , it wud be a great help if u send those to my mail id. [email protected]
regds
Message was edited by: kanth -
CRM 2007 : Unable to access the BP_HEAD component
Hello,
I'm a basis guy, very new to SAP CRM.
We have been asked to install CRM 2007.
We are able to ping the crm server from transaction sicf.
The users are able to access the webclient, they're able to acess the component "CRM_UI_FRAME"
Therefore, it doesn't seem to be any configuration error.
Afterwards ,we have been asked to activate the component BP_HEAD, but we are unable to do so.
Users are using transaction BSP_WD_CMPWB, then they choose the componenet BP_HEAD.
Then Components/view/BP_HEAD/AccountDetails they choose the confiruation tab.
and there after a while they receive an error message :
+http://xxxxxxxxxxxx.com:1080/sap/bc/bsp/sap/bsp_dlc_frcmp/session_buffered_frame.htm?
sap-client=301&sap-sessioncmd=open&sap-syscmd=nocookie&sap-language=EN&bsp_appl=BP_HEAD&bsp_page=AccountDetails.htm&role_key
=<DEFAULT>&component_usage=<DEFAULT>&object_type=<DEFAULT>&object_sub_type=<DEFAULT>&config_type=
GRID_BASED&config_usage=DEFAULT&display_mode=TRUE&transport_data=&rep_url=/sap/bc/bsp/sap/BP_HEAD/Repository.xml&locked_by=&wb_user=xxxxxxx+
We ve tried to activate all the BP_HEAD* and bsp_dlc_frcmp services in transaction sicf .. but it didn't help.
Any idea woulb be highly appreciated.
Best Regards.Hi Juan82,
please check out the[ license comparison chart |service.sap.com/~form/sapnet?_SHORTKEY=01100035870000700291&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700000953982007]on the SMP.
All the best,
Kerstin -
SAP CRM 2007 - How to Access a Table from one view to another via ABAP BSP
Hi experts, I need your help.
I am working in SAP CRM 2007 developing code modifiying views using transaction "BSP_WD_CMPWB" and my problem is the following:
After the "Account Identification" process I go to "Create Case" and click in "Complaints" option in the navigation bar.
Here there are several views involved, like "General data" and "Parties involved"
"General data" belongs to the component "BT126H_CALL" and the name of the view is "SCDetails.htm"
"Parties involved" belongs to the component "BTPARTNER" and the name of the view is "Partner.htm"
The "Partner.htm" view has a table that is displayed using a "<chtmlb:configTable . . . table = "//BTPartner/Table" instruction.
I need to acces the table "//BTPartner/Table" that belongs to "Partner.htm" in the view "SCDetails.htm" and add data into it.
How can I do that ?
Add the data in the view "Partner.htm" itself is very simple, I am using the "EH_ONINSERT" method but I have not idea how to do that from "SCDetails.htm".
Thanks in advance for your help.
Best Regards.
Exequiel.Hi,
as I understand from your question you would like to add a partner to the complaint document.
The complaint document is a 1Order document and has the root genil node named BTOrder. Using the genil relationships you have to get the BTPartnerSet and then the right Partner Relationship.
You will find a lot of information in the newsgroup on how to do this by doing a search.
But a quick help would be to use the sapgui transaction genil_model_browser, component set ONEORDER and using the tree structure navigate from the BTOrder root node to the Partner set.
Best regards,
Erika -
Hi,
I want to implement some work flow related activities in CRM 2007. Can I implement this using Guided Procedures in CAF or workflow ? Which is the better way? pls suggest..
Regards,
AjayAjay,
Your question is a little vague as you don't have a business scenario for your workflow related requirements.
I will say that if the workflow process does not involve switching out of CRM and only involves steps in CRM, then traditional workflow will work fine. If you need to do something where the steps involve multiple systems then guided procedures would be a better solution.
Perhaps if you share more of your scenario you will get some better ideas on how to go about it.
Take care,
Stephen -
After upgrade to crm 2007 31 issues in genstatus
Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus. Anu idea as to how these can be resolved. i have not been able to find any specific information on oss or in the forums on these specific issues
Thanks in advance
Eddie
Object Name Gen. group Generator Status Type Message text
ATTACHMNT_WR CG GNREP E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
CPSTOCK CG GNREP E F RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
DNL_MAT_BOMS CG GNREP E F RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
DNL_SCE_PROD CG GNREP E F RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
DNL_SCE_DWNL CG GNREP E F RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
MSV_IBA_WRITE CG GNREP E F RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
MSV_COUNTER CG LUTAB E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER CG GNREP E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
PRDCT_OBJECT CG GNREP E F Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
PRDIMAGE_WRITE CG GNREP E F RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
PRDCT_OBJECT CG LUTAB E F Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71 PUBLI E F RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
F000000274CG 669DF721A26C3440B5946C76EA44286D PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
F000000272CG F3CFBBF7F736D844995523584B67E937 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
F000000273CG CDF390E3E874144F8399B0F88E37F9F2 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
S000000053CG C44D26F0331DD511AE6A0800062AF6C0 PUBLI E F RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
S000000040CG B54CE6CE4A1DD5118BC5080006277F8D PUBLI E F RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
S000000052CG 364D26F0331DD511AE6A0800062AF6C0 PUBLI E F RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
S000000224CG 52EFC89F18E418488ED3DE4344181220 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
S000000269CG F18231121882F649AB67D87D78E561E7 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954 PUBLI E F RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001 PUBLI E F RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053 PUBLI E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050 PUBLI E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051 PUBLI E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052 PUBLI E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135 PUBLI E F RO ATTACHMNT_WR: Could not determine generated name of REFTABLEHi Kai/Mike,
Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
- We have to transport customizing from CLNT 000 to other working clients.
But our problem are:
- We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
- If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
Regards,
Vikas -
CRM 4.0 IC webclient to CRM 2007
Hi
Currently we are on CRM 4.0 using IC Webclient for our call centre. Around 30% of development done in BOL layer programming to suit the business requirements.
Now we are planning to upgrade to CRM 7.0 with IC Webclient
Can anybody help us in providing information and precautionary measures to be considered for upgrade.
Regards
Satish KumarHi,
just wanted to stress that even than BOL/ genIL is still compatible it has been significantly increased especially around the advanced and saved searches and some more new features like a generic "text-for-key" support service to facilitate UI development.
The biggest change however that you might experience in the BOL layer is, however, the complete BOL support of all CRM objects including all sub objects, relations and attributes. So the enhancements that you have done in your 4.0 project might not even be necessary anymore unless you've introduced completely new objects. Also fields you added via EEW will be available in the respective BOL objects without manual code effort.
On the UI layer itself you have to be aware that even though the whole CRM 2007 UI is based on the same UI framework as CRM 4.0 IC WebClient, this framweork has been significantly enhanced and supports now also concepts as components (to organize, structure and manage different areas of the CRM application), reuse via components and windows etc. Also there are two new sets of tags: THTMLB (Low level UI controls such as input fields, tables and trees) and CHTMLB. The latter one contains eta tags for configuable views that allow the adjustment of views via the configuration tool, which allows defining fields and arrangement on a form or a table as well as re-labelling.
Also the toolset in general has been heavily enhanced and there's also the concept of modification-free enhancements on the UI layer based on inheritance.
The upgrade will be "technical" meaning that all your stuff will survive but due to the componentization of the UI framework will not run out of the box in the new environment. You will have to "re-do" investments you've done on the UI side - however this should be much easier compared to 4.0 due to configurability of the UI and the improved toolset.
I hope this information helps to get an idea what you can expect.
Edited by: Peter Conrad on Apr 23, 2008 5:09 PM -
Business role customizing not working in crm 2007 web client
Can someone tell me what services need to be activated via sicf for business role customizing to work in the Web Client under the Administration component in CRM 2007. I have everything else working in this are eg surveys, document template, fact sheet configuration, view configuration but the business role customizing when selected just opens a blank screen
Thanks in advance
EddieHi Eddie,
The SAP CRM 2007 Master guide suggests enabling all the SICF services in the SAP namespace.
We had some script errors in CRM UI, but once all the SICF services were activated, they simply disappeared.
The IDES demo systems are also set up this way, so you can try doing it.
Regards,
Padma -
How to open multiple sessions in CRM 2007 WebClient UI
Hi guys,
This simple thing, I am could not figure out. How do I open another session on WebClient UI in CRM 2007.
Can anybody help.
Thanks,
JohnHi Vijayata,
Thank you very much for responding. Yes, now I am able to create another browser where I have to put my user id and password again. However, your answer is very useful.
I have another problem. When I login I see a list of roles and click one of them to go into the home page.
I created my own role. My question is, how do I make my role appear in the existing list of roles.
What I did is, I assigned my role to an Org.Unit. The result is when I login to WebClient UI, it directly takes me to home page of my role.
What I want is, I want my new role to appear among the existing list of roles. I tried many ways, I couldn't figure out. Can you please give idea.
Thanks,
John -
Hello,
We have installed SAP CRM 2007 and are able to create Accounts, Contacts & Opportunities etc from the web browser.
However, we are unable to execute any reports from the browser and are getting following error:
Error loading template 0TPLB_0CSALMC02_Q010_1
Any ideas / suggestions / pointers to resolve this will be highly appreciated.
Regards,
ChanderHello All,
The solution for the BI Reports in CRM 2007 has been found. The solution is as follows
You must assign the default SAP Netweaver BI system (RFC connection) to the logical system CRMBWDEST in transaction BD97. Need to have Graphical server installed also in the BI.
Award points if helpful
Mohid Uddin -
Toolbar in Interaction Center (CRM 2007)
Hi,
I have added few buttons in the toolbar of Interaction Center of CRM 2007. I want now to catch the event, when the user click on those buttons. If I understand it correctly I have to add the new event in the function wsb_handler. How can i find this function? I found the view wsb_icon.htm in the BSP application iccmp_ccs. But how can i navigate to the function wsb_handler to add my new event?
Regards
benyHello Beny,
You may add the action handler in the method ACTION_HANDLER of class CL_CRM_MCM_SESSION. This is a good starting point. In addition, using the debugger to see the call stack to this method also recommended. This will give you an idea how the call flow from the button click to the server side action handler.
Hope this helps.
Best Regards,
Satit Nuchitsiripattara -
Loading Java Applet Failed in CRM 2007 Web Client Marketing
We have recently upgraded our CRM 4.0 sp6 system to CRM 2007. As part of this upgrade we configured the SAP Best Practice Building Blocks. Logging on to the webclient using the user MKT_MAN (assigned business role BP_MKT_MAN) we get an error when trying to run the Marketing Calendar. the error we get is that "Loading Java Applet Failed" the specific applet in question is: Applet com.sap.crm.mkt.calendar.applet.MktCalendar notinited
We have implemented the following SAP notes to try and rectify the issue but with no success:
Note 1177590 - Version 2.0 of Marketing Calendar java applet
Note 1237477 - Marketing Calendar is not displayed, Tensegrity Library
Any ideas as to what can resolve this issue
Thanks in advance
EddieHi Eddie
I have exactly the same problem, using IE 6.0 & JRE 1.4.2_07.
What I have found is that users in my company with the same configuration on their machines, same settings as above can load the Marketing Calendar without issue.
Have loaded the same notes as yourself already.
I have managed to get it to working by switching off my proxy settings entirely. This is fine for testing but of no use for go live.
I have also found that when it does finally load successfully it is incredibly slow in comparison to other functionality within the WEB UI.
Thus far I have logged an OSS Message regarding this matter, could I recommend you do the same, this should encourage SAP that the issue is not isolated.
Good Luck
Arden
Maybe you are looking for
-
Uix two view-objects on one entity-object synchronize
Hi All I want to add some uix pages to an old project using ADF UIX and Business Components. I have an entity object to a table witch about 50 fields. Now I create two view objects due to a better performance. One witch seven attributes for the overw
-
How many times can i use same version
if i purchased a recent version of adobe for my lap top can i use it for my ipad as well and not pay an additional fee?
-
Trying to download itunes keeps saying I don't have apple application support
I am trying to download Itunes to a new computer error message that there is no apple application support!! Any ideas??
-
Inserting widget phatfusion imagemenu
I'm pretty new to dreamweaver but have inserted a few simple widgets on my webpage with no problems. I am now trying to insert "phatfusions imagemenu" http://www.phatfusion.net/ I would like to have my own pictures with menu titles but I can't even g
-
Program Design Problem: Inner Class use verse interacting seperate classes?
i am designing a GUI based program that needs to have 2+ windows that interact with each other. In my original design there were just two windows: the World display, and the tile choser (this is for 2D map editing). Because there were only 2, I made