CRM 2007 - Interactive Reporting Error

Hi Gurus
I am following Best Practice Guide C41 to configure the Interactive Reporting.
In the section titled: Activating Delivered Reports and InfoTypes (CRM)
This configuration is to take part in the CRM Client (Content Client) I received a number of messages of this nature: Source System xxxCLNTyyy is not Active for this BI.
Where xxx = System & yyy = Client Number.
I'm sure it's a basis config mistake but I'm sure I've done everything correctly as per the Guide.
Many Thanks in advance
Panduranga

Anyone know how to solve this?

Similar Messages

  • CRM 2007 Interaction centre : Enhancment deletion causing a Dump error

    Hi,
    To carry out some development I need to delete the existing ehnacement for BuPaCreate page however the enhancment for Bupadetail exist.
    On executing the CRM 2007 Interaction center application Bupasearch page trigger and on pressing the create  button it results in the dump in class CL_CTHMLB_CONFIG_UTILITY.
    Thanks & Rgds
    Sandy

    Hi Sandy,
    Have you already deleted the enhancement, To me it looks that your configuration got corrupted. May be that you had some Z attributes in the enhancement what you have deleted and it is still present in your configuration. Delete the config and try the standard config.
    Check other dependency of the deleted configuration.
    Thanks,
    Vikash.

  • CRM 2007 Interactive OLTP Reports - Showing No Data

    Hi,
    I am using CRM 2007 with in-built BI client and wanted to activate OLTP interactive reports. I have done settings as per C41_BB_ConfigGuide_EN_DE.doc document provided by SAP. But when I am executing these OLTP queries this shows these error .
    1. System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6]
    2. OLAP: General error on BI side.
    And shows no data.
    Please suggest a solution.....
    Best Regards,
    Lokesh Kumar
    Edited by: Lokesh Kumar on Mar 9, 2009 2:59 PM
    Pls reply someone

    Hello Lokesh,
    In SM30 maintain the Table SMOFPARSFA for the PARAMVAL field vaue of your BI interactive client.
    I think it should help.
    Best regards,
    Partha Das

  • CRM Interactive reporting, error while running RSA1

    Hello Experts,
    I had configured CRM 7 with BI 7 system for reporting. Now I am trying to implement CRM interactive reporting using a different client (as reporting client) of the same CRM system.
    While my CRM - BI scenario is working perfect, I am not able to configure the CRM interactive reporting using 2 different clients of the same system, When I am trying to run tx RSA1 from CRM reporting client, I get error "Logical system name has been changed".
    Can anyone help me in this?

    Hi Vicky,
    There must be some error in your logical system assignment.
    I request you to run these reports  Z_OLTP_CONFIG_CHECK ( In CRM Client ) and     Z_OLTP_CONFIG_CHECK_BI( Reporting Client) in order to resolve the errors. These reports will clearly point out the errors.
    Have a look at Note 1263075 - CRM Interactive Reporting Configuration Check for the reports.
    Regards...
    Arup

  • CRM Interactive Report errors

    Hi,
    We followed C41 to configure CRM Interactive reporting. I am still facing two issues.
    1) When I'm trying to run CRM Sales (eg: Closed Opportunities) report from SalesPro role, it is giving me error 'User does not have proper authorizations' although my ID have all authorizations. I am also assigned to Org Structure in Manager Position.
    2) I have added 'Manage Reports' workcenter to SalesPro role and I am trying to create new reports. Here when I select a Business Role in step 1, it is not giving me any Application Areas to select from.
    Could anyone please help me asap?
    Thanks,

    hi dipali ,
    u need to give proper authorisation in reporting client ,pl follow best practice guide to give authorisation to ur id in rep client.
    cheers
    ashutosh

  • Interactive Reporting:Error reading data of InfoProvider /CRMBW/CSAL_C01

    Hi Forum,
    I configured an interactive reporting to read interaction record data.
    When I execute the reporting, I am getting the following error message: 
                 +Error reading the data of InfoProvider /CRMBW/CSAL_C01+
                 +No destination exists to source system YYYCLNT999+
    The RFC mentioned in the error message is not the correct one. But I checked the configuration in RSA1 and the RFC mentioned there is the correct one. So, I think I am missing a customizing that is pointing to the wrong client...
    Any idea ?
    Thanks a lot and best regards.

    Hi,
    first you should check the overall configuration. Go to your CRM client and run transaction /CRMBW/CONFIG_WIZARD. If there are errors or warnings, solve them step by step. The transaction should be self-explaining but may require some expertise (the documentation provided should help, though).
    Best regards

  • CRM 2007 SP03 upgrade error

    We are running CRM 2007 on SP00/ HP-UX/Oracle 10.2.0.2
    While we are trying to apply SP01 support pack files through JSPM we are getting the following message at the bottom of JSPM screen and JSPM hangs from this point onwards:
    Target System of development component u2018dp/dam.xmltranslationu2019/u2019sap.comu2019/u2019MAIN_CRM70VAL_Cu2019/u20191294192u2019/u20190u2019
    reported the following error:
    JSPM logs does not report any error as mentioned above and JSPM does not produce any trace file either.  After displaying the above messages JSPM does not advance any further.
    Then we downloaded SP03 support pack files and  tried with the new set of files. Still facing the same problem.  Did anyone face/resolve this problem?? Please suggest.
    Thanks
    Nagesh Seemakurty

    Friends,
    We could fix the problem finally.  Here is the answer:
    Check SDM logs at ../SDM/program/log/ directory for the log that shows this error message. This log also shows that parameter 'com.sap.cm.share'  is missing from SDM repository.
    There is a note discussing the matter: 965948 Missing deployment variable "com.sap.cm.share".
    Once you set the parameter and restart JSPM everything went OK.
    Hope this helps !!
    Nagesh Seemakurty

  • Interactive reporting : error while refreshing MSSQL data in Workspace

    Hi all,
    I recently work with Hyperion and I am facing an issue that makes me crazy.
    My configuration is simple :
    - 1 win2003 server with Hyperion Interactive Reporting services and workspace installed (both works properly)
    - 1 winXP machine with MS Sql Server 2005
    - My dev PC an winXP with IR studio.
    I created an IR report with a MSSQL query that retrieves data into a Table.
    The report is displayed properly and the data is OK.
    When I refresh the data in IR studio, everything is OK.
    I import the OCE file into the the workspace, following by the BQY file.
    The report is displayed properly in workspace with the correct data.
    I change the data in the MSSQL server and I try to refresh the report in the workspace.
    So, I open the report in the workspace and I click on the refresh button.
    But when I do that, I get an error message.
    I read somewhere that we have to configure the DAS.
    I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    But when I try to add a new connection, I have only 4 choices for the type of database : Essabse, Financial Management, Planning and SAP BW.... No MSSQL Server.
    I hope that anyone among you can help me, but anyway, thanks for reading my post.

    You need to enter DATABASE details in DAS (Data Access Services) by running Service Configurator.
    Then run Remote and Local Service configurator to enter database details.
    ##I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    This is something related to Financial Reporting.
    Hope this helps.
    Regards,
    Manmohan Sharma

  • CRM - BI Interactive Reports in CRM

    Hi,
    I have some questions regarding BI Interactive Reports. Can anyone help me?
    1. Can we access the BI Interactive reports in the CRM client itself through CRM_UI transaction or do we need to login into the   
        BI client separately?
    2. If we don't maintain the users in the Central User Administration, What will be the impact?
    Thanks
    Ravi

    Hi
    1. Can we access the BI Interactive reports in the CRM client itself through CRM_UI transaction or do we need to login into the
    BI client separately?
    Yes you can access BI interactive reports in CRM client itself.
    2. If we don't maintain the users in the Central User Administration, What will be the impact?
    BI reports will not work when the users are not maintained in the central user administration
    Thanks

  • Interactive report errors when trying to query external table.

    I'm trying to create an interactive report against an external table and getting the following error. I see a note in metalink the describes its cause, but I doesn't seem to apply here.
    Query cannot be parsed, please check the syntax of your query. (ORA-06550: line 2, column 17: PLS-00302: component 'ODCIOBJECTLIST' must be declared ORA-06550: line 2, column 13: PL/SQL: Item ignored ORA-06550: line 4, column 18: PLS-00302: component 'ORACLE_LOADER' must be declared ORA-06550: line 4, column 6: PL/SQL: Statement ignored ORA-06550: line 5, column 12: PLS-00320: the declaration of the type of this expression is incomplete or malformed ORA-06550: line 5, column 6: PL/SQL: Statement ignored)
    Metalink Note:437896.1 identifies this same error related to external tables. It says the cause is an object named 'sys' that exist in the user's schema and must be removed. I checked dba_objects and there is no object named 'sys'

    Please ignore thread - operator error. There was an object named sys.

  • Interactive report error when filter

    Hi,
    I'm new to Apex and get the following error when I create an interactive report:
    "Invalid set of rows requested, the source data of the report has been modified.
    reset pagination"
    This error occurs when I scroll through the pages of the report and get to say the third page of data. I then apply a filter to restrict the data returned to less than a page worth of data, click "Go" and get the error.
    I've searched the forum and understand that this is occurring as Apex is still trying to display 3 pages of data when there is only one page worth of data and I know that I somehow need to reset the pagination, but I cannot find a way to do this. I have tried creating a process to reset the pagination, but this does not seem to fire when the "Go" button is clicked on the interactive report search bar.
    I have tried to reproduce this in my online Apex workspace, but it works fine there. I think this is probably down to using version 4.0 online, but my company is still on version 3.1.0.00.32.
    Is this a bug in the version of Apex that I'm using or is there a way that I can reset the pagination on an interactive report (when the "go" button is clicked)?
    thanks
    Adrian

    The best thing is to run the page with debug and see if the reset pagination is firing or not. Its been a long time since I used 3.1.x but I think reset pagination 3.1 works.
    Maybe something to do with the condition on the reset pagination that prevents it from running? Make reset pagination 'unconditional' and see the result.
    Regards,

  • CRM 2007 Provider Order, Error: Business Agreement should be maintained for

    Dear All
    When I am creating provider order in CRM 2007, on saving order it is throwing error A business agreement must be entered for sold-to party XYX
    Diagnosis
    The field "FI-CA active" is not selected for the sold-to party 222 in the business partner record, that is, the payment transactions are processed via the R/3 component. A business agreement must be entered for this process.
    I understand that business agreement will help in linking bp records with FI-CA. But if we dont wish to integrate with FI-CA then how to rectify this error
    Thanks and regards

    One simple way if you want to get rid of this error (mostly for testing purposes/may not be relevant for production system) is
    go to CRM SPRO->MASTER DATA->BUSINESS PARTNER->BUSINESS AGREEMENT->DEFINE BASIC SETTINGS->  (HERE DE-ACTIVATE THE FI-CA INDICATOR).

  • CRM 2007 Account Identificaiton Error

    Hi,
    I am having an error while confirming an account through account identification page, client don't use the install base/install object but when we are trying to confirm the account it is looking for the install base. How can i remove the install base search while confirming the account?
    I can remove the views for install base/object by enhancing the component CRMCMP_BPIDENT, but where can i make the change in ICCMP_BP_DETAIL on eh_onconfirm, i am not able to find where in the code is it looking for the install base for confirming an account.
    could anyone please let me know how can i restrict the code so that it won't look for install base while confiming an account. I am not sure if it can be achieve by technical changes or it can be achieved by functional configuration changes?
    Regards,
    Kamesh Bathla

    Hi,
    I just solve it, there is configuration check available for this in SPRO->CRM->Interaction Center WebClient->Master Data->Define Account Identification Profiles, there you can uncheck the check box under object components.
    Regards,
    Kamesh Bathla

  • Interactive report error

    Hi Guys
    i also have the report restricted to 10000 results per query
    Using the filters i have ruffly 20 options for the columns in the two tables from the view
    When i try and add the first filter for 18 out of the 20 filters it is successful but when i use 2 of the other filters first hand then i get a internet explorer error in the bottom left hand of the page
    Line 2
    Char 14838
    unterminated string constant
    code 0
    URL blahblahblah cant say !
    The crazy thing is if i add another filter say created date and status i can get the filters working
    i noticed also that the message saying "This query returns more then 10,000 rows, please filter your data to ensure complete results." disappears and then i can get the other 2 filers working!
    Any ideas??!!!!

    Guys i found the issue
    i had some data in the 2 columns that were blank instead of NULL
    So i just ran a update statement to set them to NULL. I would advised anyone to watch out for that!
    Cheers

  • XLS download of interactive report - error after upgrade to apex 4.1.1

    Hello!
    When trying to download a certain IR with e.g. 10 columns as XLS, I get the following error in the Excel in Apex 4.1.1:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    If I change it to two columns it works.
    BI Publisher 11.1.1.5.0
    Apex 4.1.1.00.23
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0
    In Apex 4.0.2.00.07 the exact same IR works with any number of columns.
    Any ideas?
    BR Paul

    BR Paul,
    I am experiencing the same issue after upgrading to 4.1.1.00.23 and trying to download pdf via bi pub xmlpserver. Seems if i reduce the columns to what fits on an 8.5X11 page then it works without error. Were you able to find a workaround in 4.1.1? Just trying to save some effort if you already found the solution. I wasn't successful in finding many others with this issue, so i appreciate the post but unfortunately don't have an answer to our problem. I'm using the standard csv download option and this works but of course it isn't going through bi pub.
    thanks,
    Jeff

Maybe you are looking for