CRM 2007 SP03 upgrade error

We are running CRM 2007 on SP00/ HP-UX/Oracle 10.2.0.2
While we are trying to apply SP01 support pack files through JSPM we are getting the following message at the bottom of JSPM screen and JSPM hangs from this point onwards:
Target System of development component u2018dp/dam.xmltranslationu2019/u2019sap.comu2019/u2019MAIN_CRM70VAL_Cu2019/u20191294192u2019/u20190u2019
reported the following error:
JSPM logs does not report any error as mentioned above and JSPM does not produce any trace file either.  After displaying the above messages JSPM does not advance any further.
Then we downloaded SP03 support pack files and  tried with the new set of files. Still facing the same problem.  Did anyone face/resolve this problem?? Please suggest.
Thanks
Nagesh Seemakurty

Friends,
We could fix the problem finally.  Here is the answer:
Check SDM logs at ../SDM/program/log/ directory for the log that shows this error message. This log also shows that parameter 'com.sap.cm.share'  is missing from SDM repository.
There is a note discussing the matter: 965948 Missing deployment variable "com.sap.cm.share".
Once you set the parameter and restart JSPM everything went OK.
Hope this helps !!
Nagesh Seemakurty

Similar Messages

  • CRM 2007 Mediallist + Upgrade Master Guide Required

    Hello All,
    Could any one help me in find out  CRM 2007 Mediallist and Upgrade Master Guide.
    If found pls send me the URL .
    Thanks,
    Prabhakar BR

    Hi
    Get to here:
    https://websmp208.sap-ag.de/crm-inst
    Expand CRM 2007. Select CRM Product
    You should find the documents you're looking for.
    Also lookin CRM Server Components
    Regards
    Arden

  • CRM 2007 Java Upgrade to CRM 7.0 EHP2

    Hi All,
    I performed dual stack split in CRM 2007 with separate DB for ABAP and JAVA. For upgrading CRM 2007 I tried generating solman XML file. For CRM 2007 Java, the target is chosen as CRM 7.0 EhP2, but the Net weaver components are showing the current version 700 SP21. I tried couple of times still NW 7.00 SP21 (current version) only appearing for target in solman. In Abap side, I got NW 7.03 as target for CRM 7.0EHP2 upgrade. Please advise what could be wrong.
    Thanks,
    Kavitha Rajan.

    Ajay_Basis wrote:
    Hi Srikishan,
    >
    > Actually we are having issues with the SAP router and we are unable to calculate the queue for  EHP2 upgrade and hence we can't use EHP Installer upgrade. Could you please confirm if it is not possible using full upgrade (using SapUP) tools?
    >
    >
    > Thanks,
    > Ajay.
    First, you have to use EHPi installer to do this upgrade. Second, for EHP2 upgrade, MOPZ is must because you need stack file that you can get from  MOPZ only.  Also, patches for EHP2, you can get from MOPZ only.
    Thanks
    Sunny

  • CRM 2007 Provider Order, Error: Business Agreement should be maintained for

    Dear All
    When I am creating provider order in CRM 2007, on saving order it is throwing error A business agreement must be entered for sold-to party XYX
    Diagnosis
    The field "FI-CA active" is not selected for the sold-to party 222 in the business partner record, that is, the payment transactions are processed via the R/3 component. A business agreement must be entered for this process.
    I understand that business agreement will help in linking bp records with FI-CA. But if we dont wish to integrate with FI-CA then how to rectify this error
    Thanks and regards

    One simple way if you want to get rid of this error (mostly for testing purposes/may not be relevant for production system) is
    go to CRM SPRO->MASTER DATA->BUSINESS PARTNER->BUSINESS AGREEMENT->DEFINE BASIC SETTINGS->  (HERE DE-ACTIVATE THE FI-CA INDICATOR).

  • Exchange 2003 sp2 to exchange 2007 sp1 upgrade error

    Hi,
    We had Windows 2003 DCs and Exchange 2003 servers. We migrated AD DCs to windows 2008 R2 at parent domain.
    We have one parent domain and 10 child domains in remote sites .3 remote sites have been migrated to windows 2008 R2.
    Now at parent domain I am trying to install exchange 2007 SP1 on a server with windows 2008 R2 SP1. I am facing certain issues:
    1. When I run setup /PrepareSchema on this new exchange server , the organization check fails with error stating that : cannot find at least one DC running windows 2003 SP1 or later in DC=xyx,DC=com. This could be the result of moving DC objects in AD. Check
    that at least one DC running windows server 2003 SP1 or later is located in the "Domian Controllers" OU and rerun setup".
    2. When I try to install exchange server 2007 , I get the following error
    Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported
    by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
    Can any one shed light on this issue.
    Regards
    Syed
    sa

    You cannot install Exchange 2007 SP1 on Windows 2008 R2 SP1 as it is unsupported.
    Only version of Exchange 2007 supported when OS is Windows 2008 R2 or R2 SP1 is Exchange 2007 SP3.
    Where are you installing Exchange ? child or parent domain ?
    2. When I try to install exchange server 2007 , I get the following error "Object
    cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
    Above error indicates that Exchange setup is trying to modify
    a version of an object which might have been created when organization is prepared for Exchange 2010. don't you have exchange 2010 Servers already in your environment ?
    Please give more information about your current email infrastructure
    and whether if you are installing exchange on parent or child domain?
    Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
    question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

  • CRM 2007 Account Identificaiton Error

    Hi,
    I am having an error while confirming an account through account identification page, client don't use the install base/install object but when we are trying to confirm the account it is looking for the install base. How can i remove the install base search while confirming the account?
    I can remove the views for install base/object by enhancing the component CRMCMP_BPIDENT, but where can i make the change in ICCMP_BP_DETAIL on eh_onconfirm, i am not able to find where in the code is it looking for the install base for confirming an account.
    could anyone please let me know how can i restrict the code so that it won't look for install base while confiming an account. I am not sure if it can be achieve by technical changes or it can be achieved by functional configuration changes?
    Regards,
    Kamesh Bathla

    Hi,
    I just solve it, there is configuration check available for this in SPRO->CRM->Interaction Center WebClient->Master Data->Define Account Identification Profiles, there you can uncheck the check box under object components.
    Regards,
    Kamesh Bathla

  • CRM 2007 - Insert an error message

    After to check the consistency of field STRUCT.PROBABILITY I need insert an error message in screen (web client). I created the Enhancement Point in to method GET_PROBABILITY in attribute STRUCT.PROBABILITY.
    How to insert this error message?
    Thanks,
    Daniel

    Hello Daniel,
    I would do this kind of validation in the controller of the view and not the context node by overwriting method DO_FINISH_INPUT. There you would do your check and then add the message by using a message service. Check the methods of the message service for the method which suits you.
      lr_mservice = me->view_manager->get_message_service( ).
            CALL METHOD lr_mservice->add_bapi_messages
              EXPORTING
                it_bapi_messages  = lt_msg
                iv_show_only_once = abap_true.
    Best Regards,
    Yevgen

  • CRM 2007 - Interactive Reporting Error

    Hi Gurus
    I am following Best Practice Guide C41 to configure the Interactive Reporting.
    In the section titled: Activating Delivered Reports and InfoTypes (CRM)
    This configuration is to take part in the CRM Client (Content Client) I received a number of messages of this nature: Source System xxxCLNTyyy is not Active for this BI.
    Where xxx = System & yyy = Client Number.
    I'm sure it's a basis config mistake but I'm sure I've done everything correctly as per the Guide.
    Many Thanks in advance
    Panduranga

    Anyone know how to solve this?

  • Getting error type RABAX_STATE in CRM 2007 Webclient

    Hi,
    We have installed CRM 2007 and upgraded the patchlevel of BBPCRM to SP2. After the patch upgrade we are getting type RABAX_STATE error after we log in through Webclient. We get no errors while logging through SAP GUI. Before the upgradation we were successfully able to login through Webclient. The details of error screen is as follows:
    Error when processing your request
    What has happened?
    The URL http://coevhpa4.coekc.com:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
    Note
    The following error text was processed in the system CR7 : Syntax error in program CL_BSP_WD_CONTEXT_NODE_TREE===CP .
    The error occurred on the application server coevhpa4_CR7_00 and in the work process 2 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_BSP_ELEMENT~RUNTIME_IS_VALID of program CL_THTMLB_CELLERATOR==========CP
    Method: IF_BSP_PAGE_CONTEXT~ELEMENT_PROCESS of program CL_BSP_PAGE_CONTEXT===========CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CR7 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server coevhpa4_CR7_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server coevhpa4_CR7_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 100 -u: SUMSENGU -l: E -s: CR7 -i: coevhpa4_CR7_00 -w: 2 -d: 20080422 -t: 021218 -v: RABAX_STATE -e: SYNTAX_ERROR
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Request you to kindly help ASAP. Users are waiting for it...
    Thanks and Regards,
    Suman Sengupta

    Hi,
    Have you resolved the problem ? We have encountered similar problem after patching the
    CRM 2007 to latest levels?
    Please help....
    Thanks & Regards,
    Bostjan

  • After upgrade to crm 2007 31 issues in genstatus

    Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus.  Anu idea as to how these can be resolved.  i have not been able to find any specific information on oss or in the forums on these specific issues
    Thanks in advance
    Eddie
    Object Name     Gen. group     Generator     Status     Type     Message text
    ATTACHMNT_WR              CG     GNREP          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    CPSTOCK                   CG     GNREP          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    DNL_MAT_BOMS              CG     GNREP          E     F     RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_PROD              CG     GNREP          E     F     RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_DWNL              CG     GNREP          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    MSV_IBA_WRITE             CG     GNREP          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    MSV_COUNTER               CG     LUTAB          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG     GNREP          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    PRDCT_OBJECT              CG     GNREP          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    PRDIMAGE_WRITE            CG     GNREP          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    PRDCT_OBJECT              CG     LUTAB          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71     PUBLI          E     F     RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
    F000000274CG 669DF721A26C3440B5946C76EA44286D     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000053CG C44D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000040CG B54CE6CE4A1DD5118BC5080006277F8D     PUBLI          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    S000000052CG 364D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000224CG 52EFC89F18E418488ED3DE4344181220     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000269CG F18231121882F649AB67D87D78E561E7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954     PUBLI          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001     PUBLI          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE

    Hi Kai/Mike,
    Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
    - We have to transport customizing from CLNT 000 to other working clients.
    But our problem are:
    - We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
    - If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
    I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
    Regards,
    Vikas

  • Java Enging upgrade from CRM 5.0 to CRM 2007

    Hello all,
    we would like to upgrade our CRM 5.0 System to 2007 (MS SQL Server 2005, Windows 2003 X64) and now we have a problem when we want to upgrade the JAVA Engine. I've got an error in Phase READ_AND_CHECK_ADMIN_PASSWORD in Java Prepare programm. A possible reason, says the system, is that the J2EE engine is not started. I must say that we have an ABAP and Java System and there are some ABAP workprocesses in the SAP management console but I cannot see any J2EE processes under "J2EE Process Table". Is that normal? I have no idea. I worked with the system perfectly, therefore I thought that this was not a problem, but now, after this upgrade error I'm not certain any longer. In which cases do we need Java processes anyway? Can/shall I uninstall the java component if we don't need it? If yes, how?
    Thanks for your help.
    Diana

    The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

  • Collision Detection during Upgrade from CRM 4.0 to CRM 2007

    We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
    resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
    When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
    Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
    Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
    Has anyone else experienced these issues
    Regards
    Eddie

    Hi Shankar
    We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list.  The result was that the tile was reverted to the SAP version.
    With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
    Any ideas
    Regards
    Eddie

  • CRM 2007 Upgrade stops at SHADOW_IMPORT_UPG2

    We are in the process of Upgrading CRM 5.0 to CRM 2007.
    In the phase SHADOW_IMPORT_UPG2 stops with error.
    As per the log SHDUPGIMP2.ELG and note 626915 the The index for table COMC_ATTRIBUTE had been recreated.
    After this even the upgarde is not able to continue.
    Thanks in Advance ...
    Regards
    Mathew Thomas
    Log below
    ERROR: 25 errors detected during SHADOW_IMPORT_UPG2.
    ERROR: Operation(s) not completely processed.
           Remaining change requests found in buffer CRD.
           Ignoring aborted import steps will cause severe inconsistencies
           and will likely require a full repeat of the whole upgrade.
           !!! Do not manipulate the import buffer !!!
           Analyze summary error logfile SHDUPGIMP2.ELG
           and remove all error conditions in the way
           it is described in the upgrade manual. Repeat
           this phase until it is error free.
           Additional hints may be given in logfiles
           SLOG700 and /usr/sap/put/log/SAPup.ECO
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    SHADOW IMPORT ERRORS and RETURN CODE in SAPK700TF3.CRD
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    UPGRADEPHASE SHADOW_IMPORT_UPG2
    ...started at 20080904092052
    Reading Parameter File "/usr/sap/put/bin/SHDUPGIMP2.TPP" at 20080904092053
    ...begin processing at 20080904092053
    ...tp-pid 3039
    Reading Parameter File "/usr/sap/put/bin/DEFAULT.TP0" at 20080904092117
    Condition level 1, total => TRUE '#if 3 >= 0' => TRUE
    ..finished at 20080904092118 with status UNRESOLVED REQUESTS IN BUFFER.
    ...begin dialogue at 20080904092118

    Hi Makus,
    Thanks for your reply
    Here is the ls of /usr/sap/put/tmp i have taken just now, looks like noting is happening, Upgrade assistant is running  since last night and it is not going anywhere.
    -rw-rw-rw-   1 devadm     sapsys        2310 Nov 28 11:14 UCMIG_DE.ECO
    -rw-rw-rw-   1 devadm     sapsys        1990 Nov 28 11:16 R3trans.out
    -rw-rw-rw-   1 devadm     sapsys        2302 Nov 28 11:20 ADDON_TR.ECO
    -rw-rw-rw-   1 devadm     sapsys         726 Nov 29 23:22 crshdusr.log
    -rw-rw-rw-   1 devadm     sapsys        3612 Dec  1 11:24 EU_IMTSK.ECO
    -rw-rw----   1 devadm     sapsys         424 Dec  1 13:37 SAPRUPGM.DEV
    -rw-rw-rw-   1 devadm     sapsys        1282 Dec  1 19:30 TP.ECO
    -rw-rw-r--   1 devadm     sapsys         460 Dec  1 19:30 dev_evt
    -rw-rr   1 devadm     sapsys        1084 Dec  2 09:23 dev_sapstart
    -rw-rr   1 devadm     sapsys         159 Dec  2 09:23 dev_shmdiag
    -rw-rw-rw-   1 devadm     sapsys        9151 Dec  2 09:23 dev_rfc
    -rw-rw-rw-   1 devadm     sapsys        2566 Dec  2 10:38 TPAPP.ECO
    -rw-rw-r--   1 devadm     sapsys     13018112 Dec  2 11:11 SAPK700WG7.DEV
    -rw-rw-r--   1 devadm     sapsys         250 Dec  2 21:50 SAPKK700WG1.DEV
    -rw-rw-r--   1 devadm     sapsys     1127757 Dec  2 21:50 SAPK700WG1.DEV
    here is also ps -ef | grep tp
        root  1842     1  0 15:41:51 ?         0:02 /usr/sbin/xntpd
        root  2697  2687  0 15:42:33 ?         0:20 /opt/java1.4/jre/bin/IA64N/java -cp /var/opt/OV/bin/instrumentation:OvSvcDisc.jar:OvBbcHttp.jar:xerces.jar -DOvInstallDir=/opt/
      devadm 28873 28603  0 10:44:20 pts/3     0:00 grep tp
      devadm 16258 11057  0 23:21:07 pts/0     0:02 /usr/sap/put/exe/tp pf=/usr/sap/put/bin/SHDUPGIMP2.TPP put DEV

  • VM container  error   \jkit\jre\bin\cvm\jvm.dll   on CRM 2007 IDES

    Hello All
    While activating the VM container  on CRM 2007 IDES by setting following parameter
    on instance profile
    vmcj/option/ps = 512M
    vmcj/enable = on
    mcj/option/maxJavaHeap = 200M
    vmcj/max_vm_heap_MB = 3672M
    the dispatcher gets shutdown with following error.
    <ES> 127 blocks reserved for free list.
    ES initialized.
    ERROR => DlLoadLib: LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    LOCATION    SAP-Dispatcher wicomp05_C26_02 on host wicomp05
    ERROR       Java not available
    TIME        Mon Mar 10 20:54:27 2008
    RELEASE     700
    COMPONENT   Java VM Container
    VERSION     1
    RC          11
    MODULE      vmcjxx.c
    LINE        859
    DETAIL      cannot load library
                 F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll (rc=-2)
    COUNTER     6
    ERROR => DpVmcInit: cannot load vm [dpxxvmc.c    196]
    DP_FATAL_ERROR => DpSapEnvInit: DpVmcInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    When analyzing the error
    LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    It seems like the jvm.dll in the jkit directory is not valid.
    LoadLibrary(F:\usr\sap\C26\DVEBMGS02\exe\jkit\jre\bin\cvm\jvm.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    As per the  Note 901294 it is specified
    The jvm.dll library in the $(DIR_EXECUTABLE)\jkit\jre\bin\cvm\ directory was not delivered with kernel patch levels 31 and 32,.
    The same problem can also occur generally if you forget to implement the VMC components (cfw and jkit directories) for any kernel patch.
    So do you think we need to update the VMC components in jkit directory?. But my kernel patch number  is   52  and Support package level 12, so the above note is not applicable for us. Can you guys let me know how we can update the jkit directory or any other steps to fix this jvm.dll issue.
    I will reward full points for responses

    Guys
    Solved the issue. As I said cfw and jkit directories were missing on crm2007ides kernel directory. I  downloaded the kernel 7.00 133 and verified that jkit and cfw directories are present and then upgraded the kernel.
    Now the instance is starting and VM container is also working
    Edited by: Sahad K on Mar 20, 2008 7:05 AM

  • Error Message when we create a Service Ticket in SAP CRM 2007

    Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly appreciated.
    An error occurred in system EDIES during account assignment
    Message no. CRM_ORDER_MISC 060
    Diagnosis
    Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
    Transfer Log
    No controlling type could be determined (Notification E IAOM 012)
    No controlling type could be determined (Notification E IAOM 012)
    Regards
    Sathya

    Hi,
    I have looked into your issue.
    For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
    ==> SAP Implementation Guide
    ==> Customer Relationship Management
    ==> Organizational Management
    ==> Cross-System Assignment of Organizational Units
    ==> Assign Billing Units to Service/Sales Organizations
    If the above information is not helpful kindly take a look at note 861116.
    I hope this helps.
    Regards,
    Venkat

Maybe you are looking for

  • The sort key in the master data G/l account and master data customer

    Sort Key Hi All, in the master data (control data) of the G/l account XXXXXX (it's a reconciliation account) I've filled in the sort key the value ZZ1 (XBLNR). Instead, in the master data of a certain customer which has its Reconciliation Account equ

  • Run time error while create Vendor master via MK01

    Dear Experts, when i try to create vendor master by MK01.....system throws run time error as below: "The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught anywhere along the call hierarchy. Since exceptions represent error si

  • DOM Parsing Exception in translator. Dequeuing is failing

    Hi, -> I am working on EDI HIPPA File Protocol. -> My b2b configuration is working. I am getting the payload xml in IP_IN_QUEUE. But ESB with AQAdaptor is failing giving the below Exception. -> ORABPEL-11211 DOM Parsing Exception in translator. DOM p

  • How to validate xml file ?

    I try to validate my xml import file but I can't find proper validation and error message. the source where it originates is a system where also texts can be entered manually which are part of the xml file. I discoverd myself that & and ! are charact

  • Audio limiter was turned off!?! How do I fix it?

    When taping a reception this last week, my audio limiter got turned off and the sound is blasting.  Is there a way to fix this in soundbooth? Obviously, this is something I cannot just re-tape.  Any ideas are appreciated!!