Crm 2007- target group creation

Hi all,
I am not able to view my Graphical Modeler screen in my Webclient.I am getting a blank screen, but no error messages.
Is there any additional settings to make Graphical Modeler active ?
Regads,
Aravind.

Hi Aravind,
Is Java runtime installed in your system ?
The Graphical modeller in 2007 for creation of Target groups is a Java Applet.
Hope this helps you.
Regards,
Vinay

Similar Messages

Automatic Profile Set / Target Group Creation in SAP CRM

Hi,
Need some help on the listed process.
Is there any procedure to create Profile Ser/Target group automatically based on certain criteria? We want to reduce the manual work of Profile/Target group creation for the users.
We are currently using SAP CRM 5.0 and looking at options of creating Target Groups automatically based on infoset. The criteria used to model is below mentioned.
- New Customers & Head Office (They are the customer specific Z-fields in BP Master Data)
- Relationship Data: Has contact person Relationship. This is based on the assignment of Contact person to the BP (i.e. Day when the Relationship assignment done to the respective BP Master Data --> under Relationship tab page.
We are not using Attribute Set (that we assign to Marketing Attribute tab page of BP Master), for your information.
Appreciate, if you could let us know whethe this is possible by Standard feature/ any work around on this.
Kindly do the needful.
Thanks,
Rahul

Hello Rahul,
it is possible to create a target group from an external list as far as i am aware. Maybe have a look at
http://help.sap.com/saphelp_crm50/helpdata/en/57/d7de42777c2978e10000000a155106/frameset.htm
Regards
Mark

Clustering model ..target group creation ...error

Hello All
After i created a Clustered model successfully i went ahead to create a CRM target group and as the last step in the process I selected the Training source of my Clustering Model ,right clicked it and clicked Monitor
The result shows that the CRM target group creation was incorrect.The following screeen shows the error screen.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Please advise.
Thank you
Aditya

Hi naveen
Thank you.How can I check the RFC setting for my CRM system?Has it got anything to do with this problem?I have just started learning SAP BW and CRM.Please suggest.As a matter of fact, this error occured in the BW system.The version of BW system is 3.1 Support Package 6.I could not figure out anything from the error description.Please look at this error screensot.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Thank you
Regards
Aditya

Screen become blank during the Manual Target Group creation

Hi SAP,
In the Marketing Segmentation, there is an option to allow the manual Target Group creation. I have a list of 5000 BP and I upload it via "Import Business Partner". It is just 5krecords and the screen goes blank. We have tried several times and encountering the same thing which there is no enhancement applied. Any idea if there is limit on BP to be uploaded?

Hi Subhashish,
High Volume Segmentation is recommended for segmentation activities for more than 500.000 BPs. In your case Classic Segmentation fits perfectly.
Please read the SAP documentation for more information:
Segmentation - SAP Library
Furthermore since the Import Business Partner functionality is not Java based this cannot be a Java problem.
Do you receive a dump in transaction "st22" after trying the import?
Regards,
Markus

Target Group Creation

Hi Experts
How we create target group on the basis of Net value and Product. which tables required for creation of Infoset.
Our requirement is who are buy the particular product more than xxxxx amount we need to make a target group and send the mails to them. anybody having idea on this issue plz share with me
Help full answer i will give the full points
Regards
sreedhar

Hi Manohar,
You can use below methods
1. Using BI query (BI Cube) :
Create a BI query for the sales orders with value field and BP GUID and create a data source using the BI cube with BP as BP GUID.
2. Using Marketing attribute:
Create a Marketing attribute as Sales Volume (for exp) and update this marketing attribute with the total value of the sales order + exsting value in the marketing attribute which gives the total cumilative value of the sales done so far by that particular BP.
To achieve this you may have use the breakpoint in the sales order and code for the updation of markeing attribute of sold party partner function BP.
Create a data souce using the above attribute set.
We have used 2nd method for our purpose.
Please let me know if you have any further queries.
Reward points if it helps.
Regards,
Madhu

Issue in Target Group creation of contact persons

Hi,
I am working on CRM 5.0. Using the segment builder creating target group to be attached to the campaign.
I have created one target group of organizations with Marketing attributes attached to these BPs.
Using this organizations target group as Master Group I am creating one more target group of contact persons of these organizations (using Contact persons relationship). The issue here is, out of these contact persons I require only those contact persons having interest in classical music. I have maintained this attribute in the BP master data of these contact persons.
While creating the target group of such contacts in segment builder I am using this attribute to filter the data but I am getting all the contacts without any filter applied. My requirement is to only get those contact persons (belonging to the master group of organizations) having interest in classical music. Can anyone suggest how to achieve this?
With regards
Ambar Adhav

Folks,
We have implemented Accounts & Contact Management (BP) in our CRM System. Here the Issue is the Business User Can able to create an Account Successfully from Portal but when he is trying to create Relationship - "Has Contact Person" the following error has got occured -
500 SAP Internal Server Error
Error msg - Inconsistancy between Dictionary Types COMT_BSP_BP_TEL_T AND BAPIADTEL (Type of Termination: RABAX_STATE)
Could you pls help me out and How can i proceed to scan the issue?
Srujan
Edited by: Srujan Kumar on Jan 19, 2008 8:27 AM

Target Group creation & Segmentation

Hi Friends,
Can you tell me the use of the toggle buttons OR/AND WITHIN AN ATTRIBUTE / OR/AND ACROSS ALL ATTRIBUTES below the Attribute Lists in the Segment Builder.
I my Project there is a requirement where the Client wants to use OR & AND CONDITIONS while creating a Target Group.
Thank you,
Rajendran S

Hi Rajendra,
When you have more than one filter to create a target group then use these toggle buttons to set AND / OR conditions between filters of different attributes or different filters of same attribute.
OR/AND WITHIN AN ATTRIBUTE :
If you have two filters with in same attribute, select two filters and while drag and drop the condition you see in toggle button will be set between two filters.
Ex: If Toogle button is set to : OR WITHIN AN ATTRIBUTE
      Attribute : City
      filter1: Havana
      Filter2: Atlanta
select two filters and drag and drop to the work area, then an OR condition will be set between two filters
If Toogle button is set to : AND WITHIN AN ATTRIBUTE
Then the condition between two filters will be AND.
Similar functionality with other toggle button OR/AND ACROSS ALL ATTRIBUTES.
Thanks,
Priyanka

Error in crm 2007 UI account creation

Hello Crm gurus
I came across the following error while working on sap crm ic web client 2007 acoount creation
Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
so any inputs for root cause of this error
points will be allocated
thanks& regards
Anand

Hi Anand,
I assume this error occurs when you press the 'Confirm' button ?
Have you assigned a business transaction profile to your (IC) Business Role, using function profile IC_BT ? It could be that the system does not know which transaction type to use for your interaction record.
Regards
Gert

Creation of Campaign Id and assign Target Group to it.

Hi all,
I am facing a problem in creating a Campaign Id. This is the first time i am working on CRM Marketing Campaign, and i dont know the process of creating a Campaign id for a Target Group created for BP's. Please do help me in providing me any program or link where i can find the sample programs for creation of campaign id, Campaign Element, Profile Set, Target Group, Assigning BP's to Target Group.. I am presently using the below mentioned function modules/BAPI's for creation of Profile Set, Target Group etc.,
For Profile Set Creation:                                         BAPI_PROFILESET_CREATE
For Target Group Creation:                                    BAPI_TARGETGROUP_CREATE
For Assigning Target Group to Campaign:             MKTPL_TGGR_ASSIGN_CREATE
for Campaign Element:                                            MKT_ELEMENT_CREATE
Please provide me complete program to explain the above.
Thanks in Advance,
Nagesh Thanneeru.

hi,
Target group is a group of BP, like a BP list. It's a kind of master data which can be used in business transaction.
And profile set is a base of target group, just like Product Hierachy and Product category. Each target group should belong to a profile set. So create the profile set, before you create target group.
Campaign is a kind of Marketing element of CRM Marketing. In campaign, it need the BP or BP group or Target Group as its campaign objectives. Just like Customer of Sales Order, Vendor of Purchase order.
Campaign can be assigned several target groups or BP or BP groups in it.
So if you want to create campaign and assign target group to it, the steps is:
1. create a profile set by BAPI_PROFILESET_CREATE
2. create target group by BAPI_TARGETGROUP_CREATE, in this calling, you will use the profile set created before.
3. create campaign by MKT_ELEMENT_CREATE
4. assign the target group to your campaign, by MKTPL_TGGR_ASSIGN_CREATEl, the target group comes from step 2, the campaign comes from step 3

CRM target griup creation error

Hello All
After i created a Clustered model successfully i went ahead to create a CRM target group and as the last step in the process I selected the Training source of my Clustering Model ,right clicked it and clicked Monitor
The result shows that the CRM target group creation was incorrect.The following screeen shows the error screen.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Please advise.
Thank you
Aditya

Thnak you ashwin..
These were my steps
1.Created a clustering model
2.checked for inconsistencies and activated both the training model and training source
3.Trained source online
4.Viewed training source results-Value Distribution,Attribute data and Attribute charts and went ahead to create a target gruop
5.Created target group
6.Selected "immediate" and saved .
7.Went back and selected my training source and rightclicked to monitor it
8.The results were as shown in the figure below
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
It flags that as Incorrect target group creation.Please see the figure.
What could be the problem here?
Thank you
Aditya

Can't create target group in graphical modeler

Hi,
I have a problem with the target group creation.
To create the target group I have done the following steps:
1. Go to Marketing -> segment;
2. Create Profile Set; save.
3. Go to Graphical Modeler;
4. Drag&Drop the attributes to the work area;
5. Select Count;
6. Select Build target group -> In Dialog;
7. Save target group;
8. Select u201CBacku201D to go to the Profile Set;
The system doesnu2019t do any error, but when I go to the profile set, in the block Target Groups doesnu2019t appear the target group that I have created.
If i go to the CRMD_MKTTG_TG_T CRM table, my target group is not create.
Can anyone help me, please.
Regards,
Brahmaji

HI
in gui u have to create target group in tcode crmd_mktseg create profile create target group and copy attribute list of existingif needed create filters and go for web ui create profile set and go for graphical modler and take ur attribute list and drag and drop u can split or rejoin merge target groups i think it is use full
abhinav

Passing result list from Contact search to Target group

Hi,
I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
Note: Here the contact structure is different in each component.
Thanks.

Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

Custom Attributes in Target Group

Hi,
we are experiencing an issue during Target group creation: we are unable to see our custom attributes in the Target Group.
We have an Attribute List created by a Custom infoset; the Infoset is based on a custom Table.
When we create a profile Set from this Attribute list, the Target Group is created with the correct records number, but when we look at the Target Group we find there only standard attributes, that are not defined in our Attribute List (they seems all BUT000 fields).
How can we add our custom Field to Target Group Structure?
I've read someone suggests to enahnce CRM_IM_ADD_DATA_BADI BADI: this is the only possible option? there is a way to do it using SPRO transaction?
Thanks and regards,
Francesca

Hi Francesca ,
Thanks for reporting your concern.
When the target group is displayed on the WebUI, the system uses a standard structure crmt_mkttg_genil_tg_i_enhance. The fields available for selection comes from this structure. In this structure there are some 30 user fields provided which can be filled through the badi 'CRM_MKTTG_SEG_MEM_EX'. Using this badi you can display the required Custom details.
Hope this helps.

Personalization (Cross-Selling Rules for Target Group) in E-commerce

Hi,
Could any one suggest solution for the query...
Scenario: Personalized Cross-Selling for Target Group in a Webshop (E-Commerce-B2B Occasional User Scenario). The Cross Selling is to
appear only for Target Group, but the system is prompting the Cross Selling
Rule for both Target Group aswell Global. The Config details are below
mentioned.
1. In Method Schema (11) we maintained Cross Selling Methods for Global as well
as Target Group.
(CRM_MKTPR_PP_CS_GL_READ & CRM_MKTPR_PP_CS_TG_READ).
(I did remove Global Method for testing, but still it is appearing for Global
Target Group)
2. Created Cross Selling rules in CRM for Target Group Target Group & is
Activated.
3. Target Group Modeling done in Segment Builder.
4. Target Group Assignment done in the webshop.
5. Application Administration related tasks (clearing done).
6. Product Catalog Updated Replication is done aswell.
7. Simulation of Product Proposal is done using program
"CRM_MKTPR_PRODUCT_PROPOSAL"
Please suggest me if I miss anything to recommed Cross-Selling rules only to the Target Group.
Thanks in Advance,
D u r g a r a o

Cartweaver
http://www.cartweaver.com/
Web Assist Power Store
http://www.webassist.com/support/ecommerce-options.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Target Group Integration on Cloud for Customer

Hi everyone,
I just need to know if it´s possible to integrate CRM´s Target Groups in Cloud for Customer, i just checked the Integration Guide1405, but no information is displayed. But in Communication´s Arrangement functionality we have a scenario to manage Target Groups, so i understand we can import from CRM as backend in our Cloud for Customer system.
Any idea of how to do it?
Thanks in advance,
Regards

Hi Thierry,
in general the guide refers to opening a ticket in the SuccessFactors support portal to request the ticket. As this is your first implementation you probably don't have a registered user in here.
Question:
Do you have someone else on the project/at the customer to help with the basic implementation of the SuccessFactors Platform? If yes, please ask this person to open a ticket with SuccessFactors support.
If not, then you can also open the ticket directly in C4C and it should be internally routed to the appropriate support contact.
Please note: In addition you will also need to do some basic configuration of the SuccessFactors Platform and SAP Jam. More information about initial steps to access and setup
the SuccessFactors Platform for SAP Jam can be found in the document „Setting up SAP Jam for Integration with other SAP Solutions” included in the package “SAP Best Practice for SAP Cloud for Customer Integration” available at http://service.sap.com/rds-cfc-erp
If you are interested in more information, please check out the respective training offerings for SuccessFactors Platform and SAP Jam available as "Academy Courses".
Hope this helps,
Ingo

Crm 2007- target group creation

Similar Messages

Maybe you are looking for