CRM 2007 Upgrade - Component Type is Missing in Structure

Hi,
we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
we implemented sap note 0000817539 & 0000643510, but still no success.
any lead is really appreciated
JD

Dear JD,
hopefully you have already solved your problem. If not perhaps the following information is helpful:
These Function Modules are created when the Sbdoc is generated
using the report CND_MAST_GEN_TRANSFER_OBJECTS.
Please check if the Sbdoc is generated correctly in your system or not.
You can check this in transaction SBDM.
The Sbdoc name is CNBCRMPRSAP005.
If the Sbdoc is not created correctly please use the report above to
generate and activate it.
In any case if the problem is solved, please close the thread!
Regards, Gerhard
Moderator

Similar Messages

  • CRM 2007 upgrade roadmaps

    Hello there,
    We are planning to upgrade from CRM 4.0 SP7 (on WAS 6.20) to CRM 2007 later in the year. Before this, it is desired to start using the CRM Web Shop (E-Commerce with CRM), which is not in use yet.
    What's the popular opinion on here: upgrade CRM first and then tackle the Online Store - or is there any reason not to implement the Online Store first, ie before upgrading. In other words, how easy is it to migrate a CRM 4.0 Online Store to a CRM 2007 Online Store later on ?
    Also, is there any material available regarding upgrade roadmaps? I don't mean release documentation, but a guide that picks you up on your current CRM/ERP release / Netweaver platform and then tells you which options you have for upgrading.
    Kind regards,
    Michael Koch
    Edited by: Michael Koch on Mar 11, 2008 8:39 PM

    >
    Andrew Findlay wrote:
    > Hi Michael,
    >
    > My suggestion would be to upgrade first as a lot easier - as reducing the workload.  Also it depends on the type of shop as B2C webshop became frameless in 5.0.  Especially with new functionality and screen (HTML) design usually done it will make it easier to upgrade first.  Also with the introduction of NWDI for change management for java and developer studio etc that makes developing ISA easier.
    >
    > Also for your information it is a direct technical upgrade from 4.0 to CRM 2007.
    Thanks for your helpful answer, Andrew.
    I think the web shop scenario we're after would be B2B - any infos on changes and implications for this?
    Also, what do you mean by "direct technical upgrade"? I know that minimum requirement for CRM 2007 is NW 2004s (7.0), is that what you mean?
    Kind regards,
    Michael

  • CRM 2007 Upgrade - Std Comm. Method not visible in "More Fields"

    Hi Gurus
    We recently upgraded from CRM 5.0 to CRM 2007.
    I'm verifying the Identify Account views, when I compare the "More Fields" view between CRM 5.0 and CRM 2007, the "Std Comm. Method field is not there.
    I though I could add this via configuration mode but the only Comm Method field I can find does not have a drop down list associated with it which doesn't make sense.
    Has anyone else had this same issue and how resolved.
    Many Thanks
    Panduranga

    The Comm Type field is supplied but without a drop down list as it did in CRM 5.0
    We have to modify the field to include the drop down.
    A loss in Standard Functionality!!!

  • CRM 2007 Upgrade - IE 7.0 Tabs

    Hi Gurus
    Our client has recently upgraded from CRM 5.0 to CRM 2007
    We are using the IC Webclient
    I have an issue when I confirm the customer:
    When I have IE 7.0 open with only the IC Webclient active, on confirming the customer the Account Info area is correctly populated.
    When I have IE 7.0 open already and then launch the IC Webclient, it appears in a new tab for the current IE 7.0 instance, on confirming the customer the Account Info area is left blank.
    I have not been able to locate any threads or notes on this subject but would imagine this to be a common issue.
    Any guidance gratefully received and rewarded.
    Many Thanks in advance
    Panduranga

    Hi,
    We were also facing similar problem with password. Actually what happens is if session is opened in other  tab of explorer, it reads the cookies of first tab. So problem like this come. I dont think any note/ thread can solve this problem beacuse it is issue of internet explorer and not of SAP CRM.
    Best regards
    Pankaj Kumar

  • CRM 2007 Upgrade stops at SHADOW_IMPORT_UPG2

    We are in the process of Upgrading CRM 5.0 to CRM 2007.
    In the phase SHADOW_IMPORT_UPG2 stops with error.
    As per the log SHDUPGIMP2.ELG and note 626915 the The index for table COMC_ATTRIBUTE had been recreated.
    After this even the upgarde is not able to continue.
    Thanks in Advance ...
    Regards
    Mathew Thomas
    Log below
    ERROR: 25 errors detected during SHADOW_IMPORT_UPG2.
    ERROR: Operation(s) not completely processed.
           Remaining change requests found in buffer CRD.
           Ignoring aborted import steps will cause severe inconsistencies
           and will likely require a full repeat of the whole upgrade.
           !!! Do not manipulate the import buffer !!!
           Analyze summary error logfile SHDUPGIMP2.ELG
           and remove all error conditions in the way
           it is described in the upgrade manual. Repeat
           this phase until it is error free.
           Additional hints may be given in logfiles
           SLOG700 and /usr/sap/put/log/SAPup.ECO
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    SHADOW IMPORT ERRORS and RETURN CODE in SAPK700TF3.CRD
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    UPGRADEPHASE SHADOW_IMPORT_UPG2
    ...started at 20080904092052
    Reading Parameter File "/usr/sap/put/bin/SHDUPGIMP2.TPP" at 20080904092053
    ...begin processing at 20080904092053
    ...tp-pid 3039
    Reading Parameter File "/usr/sap/put/bin/DEFAULT.TP0" at 20080904092117
    Condition level 1, total => TRUE '#if 3 >= 0' => TRUE
    ..finished at 20080904092118 with status UNRESOLVED REQUESTS IN BUFFER.
    ...begin dialogue at 20080904092118

    Hi Makus,
    Thanks for your reply
    Here is the ls of /usr/sap/put/tmp i have taken just now, looks like noting is happening, Upgrade assistant is running  since last night and it is not going anywhere.
    -rw-rw-rw-   1 devadm     sapsys        2310 Nov 28 11:14 UCMIG_DE.ECO
    -rw-rw-rw-   1 devadm     sapsys        1990 Nov 28 11:16 R3trans.out
    -rw-rw-rw-   1 devadm     sapsys        2302 Nov 28 11:20 ADDON_TR.ECO
    -rw-rw-rw-   1 devadm     sapsys         726 Nov 29 23:22 crshdusr.log
    -rw-rw-rw-   1 devadm     sapsys        3612 Dec  1 11:24 EU_IMTSK.ECO
    -rw-rw----   1 devadm     sapsys         424 Dec  1 13:37 SAPRUPGM.DEV
    -rw-rw-rw-   1 devadm     sapsys        1282 Dec  1 19:30 TP.ECO
    -rw-rw-r--   1 devadm     sapsys         460 Dec  1 19:30 dev_evt
    -rw-rr   1 devadm     sapsys        1084 Dec  2 09:23 dev_sapstart
    -rw-rr   1 devadm     sapsys         159 Dec  2 09:23 dev_shmdiag
    -rw-rw-rw-   1 devadm     sapsys        9151 Dec  2 09:23 dev_rfc
    -rw-rw-rw-   1 devadm     sapsys        2566 Dec  2 10:38 TPAPP.ECO
    -rw-rw-r--   1 devadm     sapsys     13018112 Dec  2 11:11 SAPK700WG7.DEV
    -rw-rw-r--   1 devadm     sapsys         250 Dec  2 21:50 SAPKK700WG1.DEV
    -rw-rw-r--   1 devadm     sapsys     1127757 Dec  2 21:50 SAPK700WG1.DEV
    here is also ps -ef | grep tp
        root  1842     1  0 15:41:51 ?         0:02 /usr/sbin/xntpd
        root  2697  2687  0 15:42:33 ?         0:20 /opt/java1.4/jre/bin/IA64N/java -cp /var/opt/OV/bin/instrumentation:OvSvcDisc.jar:OvBbcHttp.jar:xerces.jar -DOvInstallDir=/opt/
      devadm 28873 28603  0 10:44:20 pts/3     0:00 grep tp
      devadm 16258 11057  0 23:21:07 pts/0     0:02 /usr/sap/put/exe/tp pf=/usr/sap/put/bin/SHDUPGIMP2.TPP put DEV

  • CRM 2007 Upgrade - RDDIT006 Phase is failing in Prepare --

    I 'm upgrading from CRM 5.0 to CRM 2007 . One of the phase is failing in modification support in PREPARE (RUN_RDDIT006_PRE) .
    The fix provided by SAP did not work , the phase keeps on failing .
    Looks like this job runs again in actual upgrade . Did someone come across same problem before ??
    Joshua

    This has been resolved . tranport was provided from SAP . its a bug

  • SAP CRM 2007 Upgrade to EHP 1 for CRM 7.0

    Hi all I am doing an upgrade from 2006 to EHP1 CRM for CRM 7.0, to reach the checkpoint I mark the following error:
    This trouble ticket was created by SAPup on 20110826000546
    SAPup broke during phase SUBMOD_EXTENSION_NEW/EHP_INCLUSION in module PREP_EXTENSION / Extension module
    Error Message: Stack inclusion failed: patch level 1 for component ST-PI is too low, destination level is already at 4
    Summary of SAPup:
    SAPehpi Release:     lmt_001
    SAPehpi Version:     40.000
    Start Release:          700
    Target Release:          702
    Summary of host system details:
    SID:               CRP
    Host:               Server005
    MS Host:          Server005
    GW Host:          Server005
    Start Path:          /usr/sap/CRP/DVEBMGS00/exe     
    Kernel Path:          /usr/sap/CRP/DVEBMGS00/exe
    Summary of operating system details:
    OS Type:          AIX
    OS Version:          6.1.0
    Summary of database details:
    Database Type:          db6
    Database Version:     09.07.0001
    Summary of RFC details:
    Host:               server005
    GW Host:          server005
    Client:               000
    Destination:          CRP
    Language:          
    System No.:          00
    How i can solve this?

    Hi Antonio.
    I'm wondering if/how you resolved this issue.  I am currently facing the same problem on an upgrade to EHP1 for CRM 7.
    Thanks,
    //Eric
    Edited by: Eric Roholt on Sep 9, 2011 9:03 PM

  • CRM 2007 - Employee Work Type

    Hi Gurus
    When viewing an Employees details in the Account Details of the WEB UI.
    In the heade section there is an area call Worked, in this section is a Label "Type" with a Drop Down.
    What is this field used for and when do I configure the drop down as it is currently empty.
    I could not locate any documentation on this subject.
    Many Thanks
    Panduranga

    Hello  Panduranga,
    Are you using any HR backend system?
    Because as far as I can see, this field is relevant for HR integration scenario only... Kindly check the following method:
    CL_BUPA_IL_EMPLOYEE_HEADER~READ
    You will see line 241 that this field is retrieved via RFC call to your backend system... so I guess the corresponding value help is retrieved in the R/3 system too. In other words: It is more likely that you cannot you use this field without a connection to HR.
    Regards,
    Nicolas Busson.

  • What is the different between component and component type in extract struc

    Hi All,
    What is the different between component and component type in the Extract Structure?
    I used them, but I never really know the different between them yet.
    Thanks,
    Grace

    The difference between Component and Component Type are:
    Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
    Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

  • After upgrade to crm 2007 31 issues in genstatus

    Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus.  Anu idea as to how these can be resolved.  i have not been able to find any specific information on oss or in the forums on these specific issues
    Thanks in advance
    Eddie
    Object Name     Gen. group     Generator     Status     Type     Message text
    ATTACHMNT_WR              CG     GNREP          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    CPSTOCK                   CG     GNREP          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    DNL_MAT_BOMS              CG     GNREP          E     F     RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_PROD              CG     GNREP          E     F     RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_DWNL              CG     GNREP          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    MSV_IBA_WRITE             CG     GNREP          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    MSV_COUNTER               CG     LUTAB          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG     GNREP          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    PRDCT_OBJECT              CG     GNREP          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    PRDIMAGE_WRITE            CG     GNREP          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    PRDCT_OBJECT              CG     LUTAB          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71     PUBLI          E     F     RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
    F000000274CG 669DF721A26C3440B5946C76EA44286D     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000053CG C44D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000040CG B54CE6CE4A1DD5118BC5080006277F8D     PUBLI          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    S000000052CG 364D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000224CG 52EFC89F18E418488ED3DE4344181220     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000269CG F18231121882F649AB67D87D78E561E7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954     PUBLI          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001     PUBLI          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE

    Hi Kai/Mike,
    Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
    - We have to transport customizing from CLNT 000 to other working clients.
    But our problem are:
    - We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
    - If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
    I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
    Regards,
    Vikas

  • How to create custom component in CRM 2007

    Hi.
    I am new for the CRM 2007 Web UI.
    Here we have CRM_UI_FRAME.
    Like this so many Components are there.
    I want how to create our own component.
    I created it as follows.
    Open the Transaction code bsp_wd_cmpwb.
    Provide Z Name in the Component.
    Zcomponent
    Press Create button.
    Go to Run Time Repository.
    Press Change Mode.
    Create a MODEL as ALL.
    GO to Browser Component Structre.
    Select View.
    Provide View name.
    Create the View.
    Go to view Layout.
    Provide the code like this.
    <%@page language="abap"%>
    <%@ extension name="htmlb" prefix="htmlb"%>
    <%@ extension name="xhtmlb" prefix="xhtmlb"%>
    <%@ extension name="crm_bsp_ic" prefix="crmic"%>
    <%@ extension name="bsp" prefix="bsp"%>
    <cthmlb:overviewFormConfig/>
    Create the context under the context.
    Go to Configuration tab.
    Assigne the Attributes to the Screen.
    GO to the Run Time Repository.
    press change mode.
    Assigne the view name to the Window.
    Save it.
    Test the Componet. But it is not diaply anything on the screen.
    How i will get the data into the web UI.
    Can anybody expalin about this one to me with screen shorts if possible.
    I want add some fields into the web UI. Provide some values into that. Capture the values.
    Navigate the data from one screen to another screen. How it is possible. I did not understand. 
    If i am changing any screens in the pre define component it shows dump.
    So, now i need Custom component with adding of the fields.
    Please give me proper information regarding this one.
    Thank You.
    Krishna. B.

    Hi,
    Try put the htmlb to show a field:
    <thtmlb:label design="LABEL" for="//<context>/<field>" text="<field>"/>
    <thtmlb:inputField  id="<field>" maxlength="31" size="20" value="//<context>/<field>"/>
    In order to get value, you can write a simple code in the event_handler:
    LR_BOL                      type ref to IF_BOL_BO_PROPERTY_ACCESS
    LR_BOL = ME->TYPED_CONTEXT-><context>->COLLECTION_WRAPPER->get_current()
    var1 = LR_BOL->GET_PROPERTY_AS_STRING('FIELD').
    take a look at lr_bol methods so that you can see the set and get methods.
    Regards,
    Renato.

  • Getting error type RABAX_STATE in CRM 2007 Webclient

    Hi,
    We have installed CRM 2007 and upgraded the patchlevel of BBPCRM to SP2. After the patch upgrade we are getting type RABAX_STATE error after we log in through Webclient. We get no errors while logging through SAP GUI. Before the upgradation we were successfully able to login through Webclient. The details of error screen is as follows:
    Error when processing your request
    What has happened?
    The URL http://coevhpa4.coekc.com:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
    Note
    The following error text was processed in the system CR7 : Syntax error in program CL_BSP_WD_CONTEXT_NODE_TREE===CP .
    The error occurred on the application server coevhpa4_CR7_00 and in the work process 2 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_BSP_ELEMENT~RUNTIME_IS_VALID of program CL_THTMLB_CELLERATOR==========CP
    Method: IF_BSP_PAGE_CONTEXT~ELEMENT_PROCESS of program CL_BSP_PAGE_CONTEXT===========CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CR7 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server coevhpa4_CR7_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server coevhpa4_CR7_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 100 -u: SUMSENGU -l: E -s: CR7 -i: coevhpa4_CR7_00 -w: 2 -d: 20080422 -t: 021218 -v: RABAX_STATE -e: SYNTAX_ERROR
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Request you to kindly help ASAP. Users are waiting for it...
    Thanks and Regards,
    Suman Sengupta

    Hi,
    Have you resolved the problem ? We have encountered similar problem after patching the
    CRM 2007 to latest levels?
    Please help....
    Thanks & Regards,
    Bostjan

  • Upgrade from CRM 5.0 to CRM 2007 dublestack

    Hi Group.
    Running JPREPARE for the java stack we get stucked in the step where mounting points are requested ( EXTRACT_ROMS ). The JPREPARE cannot find the correct label or index.
    In the step EXTRACT_ROMS the JPREPARE askes for the mount point of the following DVD Type:
    CRM60_Java 'CRM 6.0 Java DVD'
    DVD_KERNEL 'SAP Kernel 700'
    NW_Java 'NW Java Content DVD
    We copied the DVD's to our iSeries and try to extract from there in a pathes like this:
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033093_CRMJava
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033260_KRN
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033265_NWJava
    Labels ( LABEL.ASC) are the following:
    SAP:JAVA-DVD1:CRM60:SAP CRM 2007 Java DVD:*:D51033093
    SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51033260
    SAP:JAVA-DVD:700SR2:content:*:D51033265
    Since the step checks one by one we initially only specified the kernel DVD, since we know that it is working on iSeries side when running PREPARE for the ABAP stack.
    Does anyone know what labels are expected???
    We also tried to mount the DVD's in the PC running the SDTgui, without any success.
    Best regards,
    Teddy
    ECCO Sko A/S
    Edited by: Teddy L. Andersen on Jun 6, 2008 2:28 PM
    The upgrade process is asking for a mounting point on iSeris. Removing the Windows drive letter Y: solved the issue. The correct mounting point was \BASISDVD\.......

    The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

  • Upgrade to CRM 2007: minumun service pack level for other components

    Hi all,
    I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
    Thanks a lot.

    Hello
    In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
    Best regards
    Gregor

  • Collision Detection during Upgrade from CRM 4.0 to CRM 2007

    We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
    resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
    When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
    Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
    Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
    Has anyone else experienced these issues
    Regards
    Eddie

    Hi Shankar
    We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list.  The result was that the tile was reverted to the SAP version.
    With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
    Any ideas
    Regards
    Eddie

Maybe you are looking for