CRM 2007 Upgrade - RDDIT006 Phase is failing in Prepare --

I 'm upgrading from CRM 5.0 to CRM 2007 . One of the phase is failing in modification support in PREPARE (RUN_RDDIT006_PRE) .
The fix provided by SAP did not work , the phase keeps on failing .
Looks like this job runs again in actual upgrade . Did someone come across same problem before ??
Joshua

This has been resolved . tranport was provided from SAP . its a bug

Similar Messages

  • CRM 2007 Upgrade stops at SHADOW_IMPORT_UPG2

    We are in the process of Upgrading CRM 5.0 to CRM 2007.
    In the phase SHADOW_IMPORT_UPG2 stops with error.
    As per the log SHDUPGIMP2.ELG and note 626915 the The index for table COMC_ATTRIBUTE had been recreated.
    After this even the upgarde is not able to continue.
    Thanks in Advance ...
    Regards
    Mathew Thomas
    Log below
    ERROR: 25 errors detected during SHADOW_IMPORT_UPG2.
    ERROR: Operation(s) not completely processed.
           Remaining change requests found in buffer CRD.
           Ignoring aborted import steps will cause severe inconsistencies
           and will likely require a full repeat of the whole upgrade.
           !!! Do not manipulate the import buffer !!!
           Analyze summary error logfile SHDUPGIMP2.ELG
           and remove all error conditions in the way
           it is described in the upgrade manual. Repeat
           this phase until it is error free.
           Additional hints may be given in logfiles
           SLOG700 and /usr/sap/put/log/SAPup.ECO
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    SHADOW IMPORT ERRORS and RETURN CODE in SAPK700TF3.CRD
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
    UPGRADEPHASE SHADOW_IMPORT_UPG2
    ...started at 20080904092052
    Reading Parameter File "/usr/sap/put/bin/SHDUPGIMP2.TPP" at 20080904092053
    ...begin processing at 20080904092053
    ...tp-pid 3039
    Reading Parameter File "/usr/sap/put/bin/DEFAULT.TP0" at 20080904092117
    Condition level 1, total => TRUE '#if 3 >= 0' => TRUE
    ..finished at 20080904092118 with status UNRESOLVED REQUESTS IN BUFFER.
    ...begin dialogue at 20080904092118

    Hi Makus,
    Thanks for your reply
    Here is the ls of /usr/sap/put/tmp i have taken just now, looks like noting is happening, Upgrade assistant is running  since last night and it is not going anywhere.
    -rw-rw-rw-   1 devadm     sapsys        2310 Nov 28 11:14 UCMIG_DE.ECO
    -rw-rw-rw-   1 devadm     sapsys        1990 Nov 28 11:16 R3trans.out
    -rw-rw-rw-   1 devadm     sapsys        2302 Nov 28 11:20 ADDON_TR.ECO
    -rw-rw-rw-   1 devadm     sapsys         726 Nov 29 23:22 crshdusr.log
    -rw-rw-rw-   1 devadm     sapsys        3612 Dec  1 11:24 EU_IMTSK.ECO
    -rw-rw----   1 devadm     sapsys         424 Dec  1 13:37 SAPRUPGM.DEV
    -rw-rw-rw-   1 devadm     sapsys        1282 Dec  1 19:30 TP.ECO
    -rw-rw-r--   1 devadm     sapsys         460 Dec  1 19:30 dev_evt
    -rw-rr   1 devadm     sapsys        1084 Dec  2 09:23 dev_sapstart
    -rw-rr   1 devadm     sapsys         159 Dec  2 09:23 dev_shmdiag
    -rw-rw-rw-   1 devadm     sapsys        9151 Dec  2 09:23 dev_rfc
    -rw-rw-rw-   1 devadm     sapsys        2566 Dec  2 10:38 TPAPP.ECO
    -rw-rw-r--   1 devadm     sapsys     13018112 Dec  2 11:11 SAPK700WG7.DEV
    -rw-rw-r--   1 devadm     sapsys         250 Dec  2 21:50 SAPKK700WG1.DEV
    -rw-rw-r--   1 devadm     sapsys     1127757 Dec  2 21:50 SAPK700WG1.DEV
    here is also ps -ef | grep tp
        root  1842     1  0 15:41:51 ?         0:02 /usr/sbin/xntpd
        root  2697  2687  0 15:42:33 ?         0:20 /opt/java1.4/jre/bin/IA64N/java -cp /var/opt/OV/bin/instrumentation:OvSvcDisc.jar:OvBbcHttp.jar:xerces.jar -DOvInstallDir=/opt/
      devadm 28873 28603  0 10:44:20 pts/3     0:00 grep tp
      devadm 16258 11057  0 23:21:07 pts/0     0:02 /usr/sap/put/exe/tp pf=/usr/sap/put/bin/SHDUPGIMP2.TPP put DEV

  • CRM 2007 Upgrade - IE 7.0 Tabs

    Hi Gurus
    Our client has recently upgraded from CRM 5.0 to CRM 2007
    We are using the IC Webclient
    I have an issue when I confirm the customer:
    When I have IE 7.0 open with only the IC Webclient active, on confirming the customer the Account Info area is correctly populated.
    When I have IE 7.0 open already and then launch the IC Webclient, it appears in a new tab for the current IE 7.0 instance, on confirming the customer the Account Info area is left blank.
    I have not been able to locate any threads or notes on this subject but would imagine this to be a common issue.
    Any guidance gratefully received and rewarded.
    Many Thanks in advance
    Panduranga

    Hi,
    We were also facing similar problem with password. Actually what happens is if session is opened in other  tab of explorer, it reads the cookies of first tab. So problem like this come. I dont think any note/ thread can solve this problem beacuse it is issue of internet explorer and not of SAP CRM.
    Best regards
    Pankaj Kumar

  • CRM 2007 upgrade roadmaps

    Hello there,
    We are planning to upgrade from CRM 4.0 SP7 (on WAS 6.20) to CRM 2007 later in the year. Before this, it is desired to start using the CRM Web Shop (E-Commerce with CRM), which is not in use yet.
    What's the popular opinion on here: upgrade CRM first and then tackle the Online Store - or is there any reason not to implement the Online Store first, ie before upgrading. In other words, how easy is it to migrate a CRM 4.0 Online Store to a CRM 2007 Online Store later on ?
    Also, is there any material available regarding upgrade roadmaps? I don't mean release documentation, but a guide that picks you up on your current CRM/ERP release / Netweaver platform and then tells you which options you have for upgrading.
    Kind regards,
    Michael Koch
    Edited by: Michael Koch on Mar 11, 2008 8:39 PM

    >
    Andrew Findlay wrote:
    > Hi Michael,
    >
    > My suggestion would be to upgrade first as a lot easier - as reducing the workload.  Also it depends on the type of shop as B2C webshop became frameless in 5.0.  Especially with new functionality and screen (HTML) design usually done it will make it easier to upgrade first.  Also with the introduction of NWDI for change management for java and developer studio etc that makes developing ISA easier.
    >
    > Also for your information it is a direct technical upgrade from 4.0 to CRM 2007.
    Thanks for your helpful answer, Andrew.
    I think the web shop scenario we're after would be B2B - any infos on changes and implications for this?
    Also, what do you mean by "direct technical upgrade"? I know that minimum requirement for CRM 2007 is NW 2004s (7.0), is that what you mean?
    Kind regards,
    Michael

  • CRM 2007 Upgrade - Std Comm. Method not visible in "More Fields"

    Hi Gurus
    We recently upgraded from CRM 5.0 to CRM 2007.
    I'm verifying the Identify Account views, when I compare the "More Fields" view between CRM 5.0 and CRM 2007, the "Std Comm. Method field is not there.
    I though I could add this via configuration mode but the only Comm Method field I can find does not have a drop down list associated with it which doesn't make sense.
    Has anyone else had this same issue and how resolved.
    Many Thanks
    Panduranga

    The Comm Type field is supplied but without a drop down list as it did in CRM 5.0
    We have to modify the field to include the drop down.
    A loss in Standard Functionality!!!

  • What can I do? Every "iPhoto Library Upgrader" I've downloaded fails to prepare the my iPhoto Library, so I can't open iPhoto any more.

    What can I do? Every time I download & run "iPhoto Library Upgrader" it fails to "prepare" the my iPhoto Library, so I can't open iPhoto any more. 
    (My MacOS & iPhoto are the latest versions.) 
    Ever since my last upgrades, every time I try to open iPhoto, a Alert box pops up saying, "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader", and it gives 2 options: a "Learn More" button or "Quit" (iPhoto) button. The "Learn More" button links to Apple's "iPhoto '11: About the Library Upgrader" page (http://support.apple.com/kb/HT5037), but whenever I then download and run that page's linked app, the same thing happens all over again. 
    It does no good to rebuild the iPhoto Library (holding down the command & option keys while reopening iPhoto): the same thing happens. 
    It does no good to use iPhoto Library Manager (http://www.fatcatsoftware.com/iplm/) to rebuild the iPhoto Library, as was suggested elsewhere: the same thing happens.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • SAP CRM 2007 Upgrade to EHP 1 for CRM 7.0

    Hi all I am doing an upgrade from 2006 to EHP1 CRM for CRM 7.0, to reach the checkpoint I mark the following error:
    This trouble ticket was created by SAPup on 20110826000546
    SAPup broke during phase SUBMOD_EXTENSION_NEW/EHP_INCLUSION in module PREP_EXTENSION / Extension module
    Error Message: Stack inclusion failed: patch level 1 for component ST-PI is too low, destination level is already at 4
    Summary of SAPup:
    SAPehpi Release:     lmt_001
    SAPehpi Version:     40.000
    Start Release:          700
    Target Release:          702
    Summary of host system details:
    SID:               CRP
    Host:               Server005
    MS Host:          Server005
    GW Host:          Server005
    Start Path:          /usr/sap/CRP/DVEBMGS00/exe     
    Kernel Path:          /usr/sap/CRP/DVEBMGS00/exe
    Summary of operating system details:
    OS Type:          AIX
    OS Version:          6.1.0
    Summary of database details:
    Database Type:          db6
    Database Version:     09.07.0001
    Summary of RFC details:
    Host:               server005
    GW Host:          server005
    Client:               000
    Destination:          CRP
    Language:          
    System No.:          00
    How i can solve this?

    Hi Antonio.
    I'm wondering if/how you resolved this issue.  I am currently facing the same problem on an upgrade to EHP1 for CRM 7.
    Thanks,
    //Eric
    Edited by: Eric Roholt on Sep 9, 2011 9:03 PM

  • CRM 2007 Upgrade - Component Type is Missing in Structure

    Hi,
    we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
    we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
    we implemented sap note 0000817539 & 0000643510, but still no success.
    any lead is really appreciated
    JD

    Dear JD,
    hopefully you have already solved your problem. If not perhaps the following information is helpful:
    These Function Modules are created when the Sbdoc is generated
    using the report CND_MAST_GEN_TRANSFER_OBJECTS.
    Please check if the Sbdoc is generated correctly in your system or not.
    You can check this in transaction SBDM.
    The Sbdoc name is CNBCRMPRSAP005.
    If the Sbdoc is not created correctly please use the report above to
    generate and activate it.
    In any case if the problem is solved, please close the thread!
    Regards, Gerhard
    Moderator

  • Loading Java Applet Failed in CRM 2007 Web Client Marketing

    We have recently upgraded our CRM 4.0 sp6 system to CRM 2007.  As part of this upgrade we configured the SAP Best Practice Building Blocks.  Logging on to the webclient using the user MKT_MAN (assigned business role BP_MKT_MAN) we get an error when trying to run the Marketing Calendar.  the error we get is that "Loading Java Applet Failed" the specific applet in question is: Applet com.sap.crm.mkt.calendar.applet.MktCalendar notinited
    We have implemented the following SAP notes to try and rectify the issue but with no success:
    Note 1177590 - Version 2.0 of Marketing Calendar java applet
    Note 1237477 - Marketing Calendar is not displayed, Tensegrity Library
    Any ideas as to what can resolve this issue
    Thanks in advance
    Eddie

    Hi Eddie
    I have exactly the same problem, using IE 6.0 & JRE 1.4.2_07.
    What I have found is that users in my company with the same configuration on their machines, same settings as above can load the Marketing Calendar without issue.
    Have loaded the same notes as yourself already.
    I have managed to get it to working by switching off my proxy settings entirely. This is fine for testing but of no use for go live.
    I have also found that when it does finally load successfully it is incredibly slow in comparison to other functionality within the WEB UI.
    Thus far I have logged an OSS Message regarding this matter, could I recommend you do the same, this should encourage SAP that the issue is not isolated.
    Good Luck
    Arden

  • Java Enging upgrade from CRM 5.0 to CRM 2007

    Hello all,
    we would like to upgrade our CRM 5.0 System to 2007 (MS SQL Server 2005, Windows 2003 X64) and now we have a problem when we want to upgrade the JAVA Engine. I've got an error in Phase READ_AND_CHECK_ADMIN_PASSWORD in Java Prepare programm. A possible reason, says the system, is that the J2EE engine is not started. I must say that we have an ABAP and Java System and there are some ABAP workprocesses in the SAP management console but I cannot see any J2EE processes under "J2EE Process Table". Is that normal? I have no idea. I worked with the system perfectly, therefore I thought that this was not a problem, but now, after this upgrade error I'm not certain any longer. In which cases do we need Java processes anyway? Can/shall I uninstall the java component if we don't need it? If yes, how?
    Thanks for your help.
    Diana

    The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

  • Upgrade from CRM 4.0 sp6 to CRM 2007

    We are in the process of upgrading our sandpit from CRM 4.0 sp 6 to CRM 2007 as part of an overall CRM upgrade project.  The technical upgrade phase went fine we now have the sandpit running some of the standard delieved business roles etc.  My question is with respect to my original customizing:
    - what customizing/configuration needs to be redone
    - what needs to be adjusted.
    - what is no longer relevant
      Is there any documentation out there that deals with addressing this topic.  Can anyone share their experiences. 
    We have a number of different Web based interaction centers some dealing with order taking in place in our original installation. 
    Thanks in advance
    Eddie

    Eddie,
    The rule of thumb is the following:
    - All UI based modifications/configurations/enhancements done in the lower release, must be redone in the new release.  Classic example is you removed fields from a screen or added new fields.  You also lose all your UI work done in CRM 40.
    - All non-UI based config/development that is in the business layer of the system should be fine, and may need some minor adjustments, but you should be able to keep this.  You probably though will have to redo some of your IC config as there were functional changes between releases.  I don't think however you will find that the configuration adjustments to take a lot of time
    - The old PCUI/IC webclient and SAP GUI applications(for data entry) are no longer relevant.
    Take care,
    Stephen

  • Upgrade to ERP EhP5 fails in phase RUN_GENPUTTBSHD

    Hi
    We are updating en ERP 604 to 605.
    Phase RUN_GENPUTTBSHD fails during schedule of a batch job.
    A dump is generated with this text:
    Runtime Errors         GEN_PROGRAM_NOT_EXISTS
    Short text:      Program "PUTTB_SHD" does not exist.
    The program could be running from the shadow instance, but from what I can see a shadow instance has not yet been created yet.
    Output from logfiles has been inserted below.
    Anyone facing this kind of error? I have seen at least one similar issue but no solution provided.
    Thanks
    Brgds Tom
    SAPEHPICONSOLE.LOG:
    >> 2011/06/08 11:58:59  START OF PHASE PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD
    Starting of PUTTB_SHD generation in batch (job RS_GENERATE_PUTTB_SHD)
    RSPTBINI.LOG:
    1 ETQ201 Entering upgrade-phase "RUN_GENPUTTBSHD" ("20110608115859")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=ed1
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'PREP_IMPORT/RUN_GENPUTTBSHD'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'RS_GENERATE_PUTTB_SHD'
    2 ETQ399 Arg[1] = 'SAP_TMPLOG'
    2 ETQ399 Arg[2] = 'NO-IGNORE'
    2 ETQ399 Arg[3] = 'RS_GENERATE_PUTTB_SHD\.$(SAPSID)'
    2 ETQ399 Arg[4] = '5'
    2 ETQ399 Arg[5] = 'PUTTB_SHD generation'
    2 ETQ399 Arg[6] = 'RSPTBINI.ELG'
    4 ETQ010 Date & Time: 20110608115859 
    4 ETQ265 Starting report "RS_GENERATE_PUTTB_SHD" with variant "SAP_TMPLOG" in batch
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    2WETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
    2WETQ361 code/exception  : BATCH_SCHEDULING_FAILED
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    2EETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
    2EETQ361 code/exception  : BATCH_SCHEDULING_FAILED
    2EETQ362 key             : BATCH_SCHEDULING_FAILED
    2EETQ364 message         :
    2EETQ399 EXCEPTION BATCH_SCHEDULING_FAILED RAISED
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    2EETG894 Exception "BATCH_SCHEDULING_FAILED" raised, write variant failed with error code -1
    2EETG890 Exception "BATCH_SCHEDULING_FAILED" raised, job scheduling failed with error code -1
    2EETQ261 Start of batchjob "RS_GENERATE_PUTTB_SHD" failed
    1 ETQ207 Executing post-phase DB specific actions.
    4 ETQ010 Date & Time: 20110608120854 
    BATCHCHK_IMP.LOG:
    1 ETQ201 Entering upgrade-phase "BATCHCHK_IMP" ("20110608084941")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=ed1
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'PREP_IMPORT/BATCHCHK_IMP'.
    4 ETQ260 Starting batchjob "RDDIT008"
    4 ETQ010 Date & Time: 20110608084941 
    4 ETQ260 Starting batchjob "RDDIT008"
    4 ETQ230 Starting RFC Login to: System = "ED1", GwHost = "bas01", GwService = "sapgw00"
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
    4 ETQ399 JOBNAME='RDDIT008', REPNAME='RDDIT008', VARNAME='', BATCHHOST='bas01', IV_SCHEDEVER=' '
    4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
    4 ETQ399 Returned JOBCOUNT='08494100'
    4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
    4 ETQ010 Date & Time: 20110608084946 
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ263 Batchjob "RDDIT008" finished successfully
    1 ETQ207 Executing post-phase DB specific actions.
    4 ETQ010 Date & Time: 20110608084946 
    SAPEHPICHK.LOG:
    CURRENTPHASE PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD
    ...started at 20110608103533
    Using phase log file 'RSPTBINI.LOG'.
    ...begin dialogue at 20110608103534
    ...end dialogue at 20110608103537
    ..finished at 20110608103537 with status CALLING PUTTB_SHD generation FAILED.
    Error message set: 'RFC call to SUBST_START_REPORT_IN_BATCH failed with key BATCH_SCHEDULING_FAILED (BATCH_SCHEDULING_FAILED): EXCEPTION BATCH_SCHEDULING_FAILED RAISED'
    ...begin dialogue at 20110608103538

    Hi
    SAP got back with this info:
    This error is caused due to the report RS_GENERATE_PUTTB_SHD being deleted druing the upgrade.
    This is a recently discovered problem with the SAPehpi patch 81.
    and the issue is fixed with the lateset version of SAPehpi.
    It will import the report RS_GENERATE_PUTTB_SHD during TOOLIMPORT.
    To use this version, you have to reset the current EHPI run and start from scratch with the new version
    New version (83) downloaded, reset prepare and the phase was now completed
    Thanks,
    Tom

  • After upgrade to crm 2007 31 issues in genstatus

    Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus.  Anu idea as to how these can be resolved.  i have not been able to find any specific information on oss or in the forums on these specific issues
    Thanks in advance
    Eddie
    Object Name     Gen. group     Generator     Status     Type     Message text
    ATTACHMNT_WR              CG     GNREP          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    CPSTOCK                   CG     GNREP          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    DNL_MAT_BOMS              CG     GNREP          E     F     RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_PROD              CG     GNREP          E     F     RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_DWNL              CG     GNREP          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    MSV_IBA_WRITE             CG     GNREP          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    MSV_COUNTER               CG     LUTAB          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG     GNREP          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    PRDCT_OBJECT              CG     GNREP          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    PRDIMAGE_WRITE            CG     GNREP          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    PRDCT_OBJECT              CG     LUTAB          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71     PUBLI          E     F     RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
    F000000274CG 669DF721A26C3440B5946C76EA44286D     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000053CG C44D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000040CG B54CE6CE4A1DD5118BC5080006277F8D     PUBLI          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    S000000052CG 364D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000224CG 52EFC89F18E418488ED3DE4344181220     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000269CG F18231121882F649AB67D87D78E561E7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954     PUBLI          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001     PUBLI          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE

    Hi Kai/Mike,
    Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
    - We have to transport customizing from CLNT 000 to other working clients.
    But our problem are:
    - We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
    - If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
    I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
    Regards,
    Vikas

  • Functional upgrade 5.0 to CRM 2007/7.0 .

    Could any one tell me what are the minimum customizations/configs needs to be done in CRM 2007/7.0  during upgrade from CRM 5.0 . Becoz some of the functionalities like UI migration can not be done automatically hence  Web Client UI need to be configured manually ,also as there is lot of difference between CRM 2007/7.0 and lot of new functionalites are added in the new version It might require huge amout of functional enhancement efforts are required during of updgrade to CRM 7.0/2007 .
    Could any one tell me what are the mandatory functional migration activties required during upgrade to CRM 7.0 also what are the different customizations/configs required in order to availa better use of the newly introduced functionalities in the latest release .
    Regards,
    Rahul

    Rahul,
    The functional differences between CRM 50 and CRM 2007 have been discussed in this forum several times, please do a search.  In addition the information you are seeking is covered in the release notes for CRM 7.0 which are located here:
    https://service.sap.com/~sapdownload/011000358700001910282008E/RN_CRM_70_01_EN.pdf
    Or under
    http://service.sap.com/releasenotes
    SAP Solutions->SAP CRM-> Release Notes SAP CRM 7.0.
    It is a several hundred page document with all the details you need.
    If you have a more specific question please post it after doing a search here.  I'm going to lock this thread due to the vague nature of your question.
    Thank you,
    Stephen
    CRM Forum Moderator

  • Upgrade to CRM 2007

    Hi All,
    I want to know the steps to upgrade to CRM 2007 from CRM 5.0.
    If you atleast give me the links where I can find the info, that is also fine.
    I need to prepare a document involving the steps and mandatory information to be noted while doing the upgrade.
    Thanks in advance.
    Regards,
    Surendra

    Hi Surendra,
    If it helps, you can get the Upgrade Master Guide document at:
    - http://service.sap.com/instguides
    -> SAP Business Suite Applications
    --> SAP CRM
    ---> SAP CRM 2007
    > CRM Product
    And there you have a link to Upgrade Master Guide SAP CRM 2007.
    Kind regards.

Maybe you are looking for

  • I have a Kernal Task that is eating my memory it a root user

    I upgraded to mavericks and found my mac book pro really sluggish from boot up whenever i try to complete any tasks from using photoshop to safari it takes too long and i get the spinning wheel I spent a whole afternoon with an apple genius who carri

  • Error 2203 installing Adobe Reader. How do I fix?

    Error 2203.Database: C:\Windows\Installer\61cd5.ipi. Cannot open database file. System error -2147287035. I am running Windows 7 and continue to get this error when attempting to install Adobe Reader. I have run the CleanUp tool and removed all previ

  • Hyperion License server info req.

    Hi, can anyone let me know where to get the license server? I am trying to install Hyperion products like 1)shared services 2)Essbase Client services 9.3.1 3)Essase server 9.3.1 4)Essbase administration services9.3.1 5)Planning 9.3.1 6)Planning UI 9.

  • Copy Chart and Legend Together

    Hi, Just tinkering with Numbers. Can anyone advise how to copy a chart and its legend to a new app? I am copying a chart in numbers but when I paste it into Mail the chart-legend is not pasted. I have tried using Cmd to select both objects but no joy

  • Can I filter vocals out with the Equalizer to get karioke-style sound?

    Hiya, I was having a play with the equalizer just now, attempting to filter out vocals so I could sing along without hearing the artist. I couldn't get the settings right, so I'm wondering if anyone here know the best equalizer settings for dumbing d