CRM 2007 Upgrade stops at SHADOW_IMPORT_UPG2

We are in the process of Upgrading CRM 5.0 to CRM 2007.
In the phase SHADOW_IMPORT_UPG2 stops with error.
As per the log SHDUPGIMP2.ELG and note 626915 the The index for table COMC_ATTRIBUTE had been recreated.
After this even the upgarde is not able to continue.
Thanks in Advance ...
Regards
Mathew Thomas
Log below
ERROR: 25 errors detected during SHADOW_IMPORT_UPG2.
ERROR: Operation(s) not completely processed.
       Remaining change requests found in buffer CRD.
       Ignoring aborted import steps will cause severe inconsistencies
       and will likely require a full repeat of the whole upgrade.
       !!! Do not manipulate the import buffer !!!
       Analyze summary error logfile SHDUPGIMP2.ELG
       and remove all error conditions in the way
       it is described in the upgrade manual. Repeat
       this phase until it is error free.
       Additional hints may be given in logfiles
       SLOG700 and /usr/sap/put/log/SAPup.ECO
  LIST OF ERRORS AND RETURN CODES  *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPK700TF3.CRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
UPGRADEPHASE SHADOW_IMPORT_UPG2
...started at 20080904092052
Reading Parameter File "/usr/sap/put/bin/SHDUPGIMP2.TPP" at 20080904092053
...begin processing at 20080904092053
...tp-pid 3039
Reading Parameter File "/usr/sap/put/bin/DEFAULT.TP0" at 20080904092117
Condition level 1, total => TRUE '#if 3 >= 0' => TRUE
..finished at 20080904092118 with status UNRESOLVED REQUESTS IN BUFFER.
...begin dialogue at 20080904092118

Hi Makus,
Thanks for your reply
Here is the ls of /usr/sap/put/tmp i have taken just now, looks like noting is happening, Upgrade assistant is running  since last night and it is not going anywhere.
-rw-rw-rw-   1 devadm     sapsys        2310 Nov 28 11:14 UCMIG_DE.ECO
-rw-rw-rw-   1 devadm     sapsys        1990 Nov 28 11:16 R3trans.out
-rw-rw-rw-   1 devadm     sapsys        2302 Nov 28 11:20 ADDON_TR.ECO
-rw-rw-rw-   1 devadm     sapsys         726 Nov 29 23:22 crshdusr.log
-rw-rw-rw-   1 devadm     sapsys        3612 Dec  1 11:24 EU_IMTSK.ECO
-rw-rw----   1 devadm     sapsys         424 Dec  1 13:37 SAPRUPGM.DEV
-rw-rw-rw-   1 devadm     sapsys        1282 Dec  1 19:30 TP.ECO
-rw-rw-r--   1 devadm     sapsys         460 Dec  1 19:30 dev_evt
-rw-rr   1 devadm     sapsys        1084 Dec  2 09:23 dev_sapstart
-rw-rr   1 devadm     sapsys         159 Dec  2 09:23 dev_shmdiag
-rw-rw-rw-   1 devadm     sapsys        9151 Dec  2 09:23 dev_rfc
-rw-rw-rw-   1 devadm     sapsys        2566 Dec  2 10:38 TPAPP.ECO
-rw-rw-r--   1 devadm     sapsys     13018112 Dec  2 11:11 SAPK700WG7.DEV
-rw-rw-r--   1 devadm     sapsys         250 Dec  2 21:50 SAPKK700WG1.DEV
-rw-rw-r--   1 devadm     sapsys     1127757 Dec  2 21:50 SAPK700WG1.DEV
here is also ps -ef | grep tp
    root  1842     1  0 15:41:51 ?         0:02 /usr/sbin/xntpd
    root  2697  2687  0 15:42:33 ?         0:20 /opt/java1.4/jre/bin/IA64N/java -cp /var/opt/OV/bin/instrumentation:OvSvcDisc.jar:OvBbcHttp.jar:xerces.jar -DOvInstallDir=/opt/
  devadm 28873 28603  0 10:44:20 pts/3     0:00 grep tp
  devadm 16258 11057  0 23:21:07 pts/0     0:02 /usr/sap/put/exe/tp pf=/usr/sap/put/bin/SHDUPGIMP2.TPP put DEV

Similar Messages

  • CRM 2007 Upgrade - IE 7.0 Tabs

    Hi Gurus
    Our client has recently upgraded from CRM 5.0 to CRM 2007
    We are using the IC Webclient
    I have an issue when I confirm the customer:
    When I have IE 7.0 open with only the IC Webclient active, on confirming the customer the Account Info area is correctly populated.
    When I have IE 7.0 open already and then launch the IC Webclient, it appears in a new tab for the current IE 7.0 instance, on confirming the customer the Account Info area is left blank.
    I have not been able to locate any threads or notes on this subject but would imagine this to be a common issue.
    Any guidance gratefully received and rewarded.
    Many Thanks in advance
    Panduranga

    Hi,
    We were also facing similar problem with password. Actually what happens is if session is opened in other  tab of explorer, it reads the cookies of first tab. So problem like this come. I dont think any note/ thread can solve this problem beacuse it is issue of internet explorer and not of SAP CRM.
    Best regards
    Pankaj Kumar

  • CRM 2007 upgrade roadmaps

    Hello there,
    We are planning to upgrade from CRM 4.0 SP7 (on WAS 6.20) to CRM 2007 later in the year. Before this, it is desired to start using the CRM Web Shop (E-Commerce with CRM), which is not in use yet.
    What's the popular opinion on here: upgrade CRM first and then tackle the Online Store - or is there any reason not to implement the Online Store first, ie before upgrading. In other words, how easy is it to migrate a CRM 4.0 Online Store to a CRM 2007 Online Store later on ?
    Also, is there any material available regarding upgrade roadmaps? I don't mean release documentation, but a guide that picks you up on your current CRM/ERP release / Netweaver platform and then tells you which options you have for upgrading.
    Kind regards,
    Michael Koch
    Edited by: Michael Koch on Mar 11, 2008 8:39 PM

    >
    Andrew Findlay wrote:
    > Hi Michael,
    >
    > My suggestion would be to upgrade first as a lot easier - as reducing the workload.  Also it depends on the type of shop as B2C webshop became frameless in 5.0.  Especially with new functionality and screen (HTML) design usually done it will make it easier to upgrade first.  Also with the introduction of NWDI for change management for java and developer studio etc that makes developing ISA easier.
    >
    > Also for your information it is a direct technical upgrade from 4.0 to CRM 2007.
    Thanks for your helpful answer, Andrew.
    I think the web shop scenario we're after would be B2B - any infos on changes and implications for this?
    Also, what do you mean by "direct technical upgrade"? I know that minimum requirement for CRM 2007 is NW 2004s (7.0), is that what you mean?
    Kind regards,
    Michael

  • CRM 2007 Upgrade - Std Comm. Method not visible in "More Fields"

    Hi Gurus
    We recently upgraded from CRM 5.0 to CRM 2007.
    I'm verifying the Identify Account views, when I compare the "More Fields" view between CRM 5.0 and CRM 2007, the "Std Comm. Method field is not there.
    I though I could add this via configuration mode but the only Comm Method field I can find does not have a drop down list associated with it which doesn't make sense.
    Has anyone else had this same issue and how resolved.
    Many Thanks
    Panduranga

    The Comm Type field is supplied but without a drop down list as it did in CRM 5.0
    We have to modify the field to include the drop down.
    A loss in Standard Functionality!!!

  • CRM 2007 Upgrade - RDDIT006 Phase is failing in Prepare --

    I 'm upgrading from CRM 5.0 to CRM 2007 . One of the phase is failing in modification support in PREPARE (RUN_RDDIT006_PRE) .
    The fix provided by SAP did not work , the phase keeps on failing .
    Looks like this job runs again in actual upgrade . Did someone come across same problem before ??
    Joshua

    This has been resolved . tranport was provided from SAP . its a bug

  • SAP CRM 2007 Upgrade to EHP 1 for CRM 7.0

    Hi all I am doing an upgrade from 2006 to EHP1 CRM for CRM 7.0, to reach the checkpoint I mark the following error:
    This trouble ticket was created by SAPup on 20110826000546
    SAPup broke during phase SUBMOD_EXTENSION_NEW/EHP_INCLUSION in module PREP_EXTENSION / Extension module
    Error Message: Stack inclusion failed: patch level 1 for component ST-PI is too low, destination level is already at 4
    Summary of SAPup:
    SAPehpi Release:     lmt_001
    SAPehpi Version:     40.000
    Start Release:          700
    Target Release:          702
    Summary of host system details:
    SID:               CRP
    Host:               Server005
    MS Host:          Server005
    GW Host:          Server005
    Start Path:          /usr/sap/CRP/DVEBMGS00/exe     
    Kernel Path:          /usr/sap/CRP/DVEBMGS00/exe
    Summary of operating system details:
    OS Type:          AIX
    OS Version:          6.1.0
    Summary of database details:
    Database Type:          db6
    Database Version:     09.07.0001
    Summary of RFC details:
    Host:               server005
    GW Host:          server005
    Client:               000
    Destination:          CRP
    Language:          
    System No.:          00
    How i can solve this?

    Hi Antonio.
    I'm wondering if/how you resolved this issue.  I am currently facing the same problem on an upgrade to EHP1 for CRM 7.
    Thanks,
    //Eric
    Edited by: Eric Roholt on Sep 9, 2011 9:03 PM

  • CRM 2007 Upgrade - Component Type is Missing in Structure

    Hi,
    we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
    we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
    we implemented sap note 0000817539 & 0000643510, but still no success.
    any lead is really appreciated
    JD

    Dear JD,
    hopefully you have already solved your problem. If not perhaps the following information is helpful:
    These Function Modules are created when the Sbdoc is generated
    using the report CND_MAST_GEN_TRANSFER_OBJECTS.
    Please check if the Sbdoc is generated correctly in your system or not.
    You can check this in transaction SBDM.
    The Sbdoc name is CNBCRMPRSAP005.
    If the Sbdoc is not created correctly please use the report above to
    generate and activate it.
    In any case if the problem is solved, please close the thread!
    Regards, Gerhard
    Moderator

  • Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows

    Hi,
    I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
    The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running  a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
    Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
    System cannot connect the database?
    Here is dev_w0 file contets:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        XCR
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2260
    Sun Nov 16 16:56:01 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Sun Nov 16 16:56:06 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ESITV016LAB_XCR_01                      <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Sun Nov 16 16:56:07 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Sun Nov 16 16:56:47 2008
    ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:56:57 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sun Nov 16 14:56:57 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     1608 Ended         no      1   0        0                                                                         
    1 DIA     3940 Ended         no      1   0        0                                                                         
    2 DIA      636 Ended         no      1   0        0                                                                         
    3 DIA     3484 Ended         no      1   0        0                                                                         
    4 DIA     3504 Ended         no      1   0        0                                                                         
    5 DIA     1108 Ended         no      1   0        0                                                                         
    6 DIA     3512 Ended         no      1   0        0                                                                         
    7 DIA     3592 Ended         no      1   0        0                                                                         
    8 DIA     3616 Ended         no      1   0        0                                                                         
    9 DIA     3608 Ended         no      1   0        0                                                                         
    10 UPD     3368 Ended         no      1   0        0                                                                         
    11 ENQ     1388 Ended         no      1   0        0                                                                         
    12 BTC     3276 Ended         no      1   0        0                                                                         
    13 BTC     1256 Ended         no      1   0        0                                                                         
    14 BTC     3400 Ended         no      1   0        0                                                                         
    15 SPO     2376 Ended         no      1   0        0                                                                         
    16 UP2     3032 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Sun Nov 16 14:56:57 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Sun Nov 16 14:56:57 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sun Nov 16 14:56:57 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:02 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ESITV016LAB_XCR_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4076) (SOFT_KILL)
    Stop icman
    killing process (3800) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4076  HANDLE:388)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4076  HANDLE:388)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3800  HANDLE:396)
    DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01                      <)
    NiIMyHostName: hostname = 'ESITV016LAB'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sun Nov 16 16:57:15 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 312 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 312 (pos=2)
    SiSelNRemove: removed sock 312
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 312
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c   10421]
    Good Bye .....
    BR,
    Kari

    Hi,
    here is the right log content:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ

    B Mon Nov 17 10:24:39 2008
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M sysno      01
    M sid        XCR
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        2184
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

    M Mon Nov 17 10:24:40 2008
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.

    M Mon Nov 17 10:24:41 2008
    M  ThInit: running on host ESITV016LAB
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]

    M  Info for wp 0

    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Nov 17 10:24:41 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c   327]
    BR,
    Kari

  • After upgrade to crm 2007 31 issues in genstatus

    Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus.  Anu idea as to how these can be resolved.  i have not been able to find any specific information on oss or in the forums on these specific issues
    Thanks in advance
    Eddie
    Object Name     Gen. group     Generator     Status     Type     Message text
    ATTACHMNT_WR              CG     GNREP          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    CPSTOCK                   CG     GNREP          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    DNL_MAT_BOMS              CG     GNREP          E     F     RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_PROD              CG     GNREP          E     F     RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
    DNL_SCE_DWNL              CG     GNREP          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    MSV_IBA_WRITE             CG     GNREP          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    MSV_COUNTER               CG     LUTAB          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG     GNREP          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    PRDCT_OBJECT              CG     GNREP          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    PRDIMAGE_WRITE            CG     GNREP          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    PRDCT_OBJECT              CG     LUTAB          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71     PUBLI          E     F     RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
    F000000274CG 669DF721A26C3440B5946C76EA44286D     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000053CG C44D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000040CG B54CE6CE4A1DD5118BC5080006277F8D     PUBLI          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
    S000000052CG 364D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
    S000000224CG 52EFC89F18E418488ED3DE4344181220     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000269CG F18231121882F649AB67D87D78E561E7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954     PUBLI          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
    SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001     PUBLI          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
    SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
    ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
    ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE

    Hi Kai/Mike,
    Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
    - We have to transport customizing from CLNT 000 to other working clients.
    But our problem are:
    - We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
    - If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
    I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
    Regards,
    Vikas

  • Functional upgrade 5.0 to CRM 2007/7.0 .

    Could any one tell me what are the minimum customizations/configs needs to be done in CRM 2007/7.0  during upgrade from CRM 5.0 . Becoz some of the functionalities like UI migration can not be done automatically hence  Web Client UI need to be configured manually ,also as there is lot of difference between CRM 2007/7.0 and lot of new functionalites are added in the new version It might require huge amout of functional enhancement efforts are required during of updgrade to CRM 7.0/2007 .
    Could any one tell me what are the mandatory functional migration activties required during upgrade to CRM 7.0 also what are the different customizations/configs required in order to availa better use of the newly introduced functionalities in the latest release .
    Regards,
    Rahul

    Rahul,
    The functional differences between CRM 50 and CRM 2007 have been discussed in this forum several times, please do a search.  In addition the information you are seeking is covered in the release notes for CRM 7.0 which are located here:
    https://service.sap.com/~sapdownload/011000358700001910282008E/RN_CRM_70_01_EN.pdf
    Or under
    http://service.sap.com/releasenotes
    SAP Solutions->SAP CRM-> Release Notes SAP CRM 7.0.
    It is a several hundred page document with all the details you need.
    If you have a more specific question please post it after doing a search here.  I'm going to lock this thread due to the vague nature of your question.
    Thank you,
    Stephen
    CRM Forum Moderator

  • Upgrade to CRM 2007

    Hi All,
    I want to know the steps to upgrade to CRM 2007 from CRM 5.0.
    If you atleast give me the links where I can find the info, that is also fine.
    I need to prepare a document involving the steps and mandatory information to be noted while doing the upgrade.
    Thanks in advance.
    Regards,
    Surendra

    Hi Surendra,
    If it helps, you can get the Upgrade Master Guide document at:
    - http://service.sap.com/instguides
    -> SAP Business Suite Applications
    --> SAP CRM
    ---> SAP CRM 2007
    > CRM Product
    And there you have a link to Upgrade Master Guide SAP CRM 2007.
    Kind regards.

  • Upgrade from CRM 5.0 to CRM 2007

    Hi,
    We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
    You will rewarded with the points. Thanks in advance. Please, Its URGENT...
    Cheers,
    Amit

    Amit,
    Based on your reply your work looks like the following:
    1.  Basis teams performs tech upgrade of your dev system
    2.  Security team grants temporary expanded access in dev system to access new UI and new UI tools
    3.  Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
    4.  Dev/Config team adjusts any BADI's built in the previous release
    The data model of CRM has not changed.  If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration.  However if you did not play by the SAP standards you could have more work.
    As far as tracking your project you can use solution manager or build simple project tracking in MS project.
    If you did no coding period, and only configuration.  You should be able to complete all the configuration work in less than two weeks to get the screens as needed.  However that is based on having at least one to two weeks of learning the new UI tool.
    I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
    Take care,
    Stephen

  • Upgrade from CRM 5.0 to CRM 2007 dublestack

    Hi Group.
    Running JPREPARE for the java stack we get stucked in the step where mounting points are requested ( EXTRACT_ROMS ). The JPREPARE cannot find the correct label or index.
    In the step EXTRACT_ROMS the JPREPARE askes for the mount point of the following DVD Type:
    CRM60_Java 'CRM 6.0 Java DVD'
    DVD_KERNEL 'SAP Kernel 700'
    NW_Java 'NW Java Content DVD
    We copied the DVD's to our iSeries and try to extract from there in a pathes like this:
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033093_CRMJava
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033260_KRN
    Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033265_NWJava
    Labels ( LABEL.ASC) are the following:
    SAP:JAVA-DVD1:CRM60:SAP CRM 2007 Java DVD:*:D51033093
    SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51033260
    SAP:JAVA-DVD:700SR2:content:*:D51033265
    Since the step checks one by one we initially only specified the kernel DVD, since we know that it is working on iSeries side when running PREPARE for the ABAP stack.
    Does anyone know what labels are expected???
    We also tried to mount the DVD's in the PC running the SDTgui, without any success.
    Best regards,
    Teddy
    ECCO Sko A/S
    Edited by: Teddy L. Andersen on Jun 6, 2008 2:28 PM
    The upgrade process is asking for a mounting point on iSeris. Removing the Windows drive letter Y: solved the issue. The correct mounting point was \BASISDVD\.......

    The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

  • Upgrade to CRM 2007: minumun service pack level for other components

    Hi all,
    I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
    Thanks a lot.

    Hello
    In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
    Best regards
    Gregor

  • Upgrade from CRM 4.0 sp6 to CRM 2007

    We are in the process of upgrading our sandpit from CRM 4.0 sp 6 to CRM 2007 as part of an overall CRM upgrade project.  The technical upgrade phase went fine we now have the sandpit running some of the standard delieved business roles etc.  My question is with respect to my original customizing:
    - what customizing/configuration needs to be redone
    - what needs to be adjusted.
    - what is no longer relevant
      Is there any documentation out there that deals with addressing this topic.  Can anyone share their experiences. 
    We have a number of different Web based interaction centers some dealing with order taking in place in our original installation. 
    Thanks in advance
    Eddie

    Eddie,
    The rule of thumb is the following:
    - All UI based modifications/configurations/enhancements done in the lower release, must be redone in the new release.  Classic example is you removed fields from a screen or added new fields.  You also lose all your UI work done in CRM 40.
    - All non-UI based config/development that is in the business layer of the system should be fine, and may need some minor adjustments, but you should be able to keep this.  You probably though will have to redo some of your IC config as there were functional changes between releases.  I don't think however you will find that the configuration adjustments to take a lot of time
    - The old PCUI/IC webclient and SAP GUI applications(for data entry) are no longer relevant.
    Take care,
    Stephen

Maybe you are looking for

  • Returning strings from OLE2 Word object (Forms 4.5)

    Below is an example of how to return string and numeric values from OLE2 objects. In this example the OLE2 object is a MS Word document, and I want to fetch all the bookmarks in the Document into a Forms 4.5 Varchar2. To do this I first need to get t

  • ITunes won't recognize iPod nano

    Hey y'all! First of all I would like to say that I searched this, and lots of other forums for the answer to my question, I've tried so many different things, been at it for a couple of hours, and NOTHING works! I'm on my iMac with OSX 10.10.2 and my

  • How do I get to see the lyrics for a song?

    On my old iPod I just pressed the center button in the wheel to get them to view. I tap the screen of my iPod Touch, while a song with lyrics is playing, and nothing appears. Am I doing something wrong?

  • AssertionError when trying to integrate weblogic 10.3.4 with WSO2 ESB 4.6.0

    Hi, I am trying to integrate WSO2 ESB 4.6.0 with weblogic 10.3.4 to use weblogic as a JMS message store. The connection seems to be established at startup according to the console output from the WSO2 ESB. I did create a ConnectionFactory and Queue a

  • Disabled business event subscription but still getting error messages

    We have been getting the issue described in MOS note 1149193.1 (ORA-01403: NO DATA FOUND in oracle.apps.cs.sr.serviceRequest.created On Creating And Updating SRs) - the fix is to disable the subscription against the business event. I have done this i