CRM 2007 with CRM Mobile Infrastructure

We are building a Prototype (Non Production) CRM 2007 with CRM Mobile Infrastructure as an internal project.
Question 1: I wanted to ask, as it is stated that Commstation cannot run on64 Bit Hardware/64 Bit OS hardware and it is not supported by SAP. I was checking the CRM Mobile Installation Guide
https://websmp110.sap-ag.de/~sapdownload/011000358700002090432006E/
and wanted to confirm if there is a possibility of us using one server instance to install the Mobile Repository Server, Mobile Development Workstation, Communication Station (CommStation) all
in one box??
Q2: Secondly, if we were only using mobile infrastructure for CRM scenarios Field Account and Contact Management, Field OpportunityManagement,
and possibly Quotation Management (not the Order Management) will we still need to install a Workgroup Server/Workgroup Client??
Is it also possible to install Mobile Repository Server, Mobile Development Workstation, Communication Station (CommStation) on the actual CRM 2007 server we currently have??
Q3: Can we realize the CRM Mobile scenarios with just three servers?
1 CRM 2007 Server (existing server already deployed with CRM 2007)
1 SAP CRM Mobile Server
1 CommStation Server
Q4: Can we realize these CRM Mobile scenarios Field Account and Contact Management, Field OpportunityManagement, and possibly Quotation Management (not the Order Management), by simply installing Usage Type MI on our CRM 2007 (existing) Server?
Thanks.
James

Hi James,
It is possible to install Comm Station\Repository and MDW on the one machine.
The repository server contains only the db and some tools
But not recommended by SAP.
The prerequisites are that the Development Workstation is installed on a separate machine from teh repository server.
But as you can see in the installation guide, it is possible to install a local repository.
However its recommended to have one central repository and have a dev workstation connect to it.
If you have several developers accessing the same central machine, it would cause problems. Its recommended to have the MAS application
installed on their local machine connecting to the repository.
I would also keep the mobile scenario separate from CRM Online. As you have stated below, the 3 servers would be enough.
You dont need to have the Workgroup for the CRM scenarios you have mentioned.
Rgds, Gervase

Similar Messages

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

Difference between CRM 2007 and CRM 7.0?

Hi Gurus
Whatu2019s the Difference between CRM 2007 and CRM 7.0?
Whatu2019s the Difference between CRM 2007 and CRM 5.0?
Thanks
Kumar

Hi Kumar,
please have a look at this thread:
What are differences between CRM 7.0 and CRM 2007?
Chech out also the CRM Wiki:
http://wiki.sdn.sap.com/wiki/display/CRM/CustomerRelationshipManagement
Kind regards
Hannes

Upgrade from CRM 2007 to CRM 7.0

Hello
I have a quick question regarding upgrade possibility. CRM 2007 was installed with dual stack (ABAP & JAVA). Now SAP does not allow to install dual stack (see note 855534). This is the case for CRM 7.0 With fresh installation we need one system with ABAP and one with JAVA.
The question is : if I have dual stack and what to upgrade to the latest version, what happens? I have found information that for CRM upgrade with dual stack I need files from folder SAP CRM--> SAP CRM 7.0 / NW7.01.
Can we have CRM 7.0 with dual stack ?
Thank you in advance for your help
regards
Rafal

Hello
We are now in the same question.
How do you solve the question?
Upgrade process finished with a dual stack or not?
Thanks and regards
Javier

CRM 2007 vs CRM 52: Account Search - Favorites

Does the functionality exist in CRM 2007 to save "favorite" accounts in the account search application similar to the accounts application in the PCUI in CRM 40/50? I know that you can do saved searches with CRM 52/2007, however can we create lists of favorite accounts directly from the UI.
Our business users heavily use the favorite account feature in the PCUI. If this not present what alternatives besides setting up relationships between the accounts and their employee bupa record and using a saved search for that criteria would I have to simulate this functionality?
I will generously reward points for proposed solutions.
thank you,
Stephen

Stephen,
Actually I'm not aware of limitations around how many search criteria could be save together as the dynamic object queries are stored and the parameters are stored in a xml format.
The Saved search are stored in tables CRMD_SHORTCUT and CRMT_DYN_QUERY. For the short cut one there also exist a _T table for the texts.
If you want to look for multiple IDs as a saved search you could do this in case you do not have a "better" common search criteria e.g. country or region.
I'm not sure what you refer to as a concept with regards to leveraging the relationships.
Hope this helps,
Florian

Login problem with SAP Mobile Infrastructure

Hi
      I have installed SAP WebAS 6.40 SP9 .
i could see SAP Mobile Infrastructure if i use the following URL -
http://<localhost>:50000/me/WebConsole/login
but i am not able to login with any of the SAP WebAS logins it is giving a error.
      I have also installed SAP GUI for windows to which i am able to login using DDIC login of SAP WebAS.
      It will be helpfull if any one can tell me how to check if the entries in the SAP MI login page are correct like the System ,client,system number,language,user and the password.
Thanks and Regards
gopi

Hi Gopi!
To install MI Client on a Desktop PC,look for the setup.exe file in MI folder in the "Netweaver Components" installation DVD,run one of these setup files based on the framework you need(MOBILEENGINE_JSP or MOBILEENGINE_AWT).
<...\MI\MI2.5_SP09\JSP\win32\comp\setup.exe>
<...\MI\MI2.5_SP09\AWT\win32\comp\setup.exe>
Then run MobileEngine.Exe(After installation you will have a shortcut on your desktop),Create a New User to LogOn and then "Goto>>>Settings" and set up the connection parameters to logon.
Refer to the Installation Guide using the link from Jill Elliot.
I donot understand what do you mean by "setting changes after installing the SAP WebAS 6.40 SP 09?"
Thx
Gisk
Message was edited by: Gisk

How to create customer in crm sales with crm 7.0

hi,
can anyone tell me how to create a customer?
i am new to crm. I am learning crm sales
Thanking you
prasad

Hi,
As explained before, go to SALESPRO, SalesPro and SPRO are different.
SALESPRO is a role in UI..make sure that it is added for your login.
go to transaction crm_ui -> SALESPRO business role ->Account Managemnt in the navigation bar -> Accounts -> Corporate Accounts.
Hope this helps!!
Prerna

CRM 2007 Integration with Lotus Notes 8.0 (Groupware Integration)

Hi
We are doing CRM 2007 Integration with Lotus Notes 8.0. So i need your help in this regard.I have the following documents with me.....
a) SAP CRM Groupware Connector Relase 4.0 (Installation Guide)
b) SAP CRM Groupware Connector Relase 4.0 (Administrative Guide)               c) MapBox 4.0 sp 11             &
d) Groupware Integration installation Guide.
We have started with Groupware connector Release 4.0 Installation guide
We stucked at
5.3 Installing Lotus Domino Groupware Connector
Procedure
1. Log on to your host using prepared Groupware Connector's administrative account.
2. Launch setup.exe
3. Click Next on the Welcome screen.
4. Read the text on the Installation Prerequisites screen and check if your computer meets all the software
and hardware requirements. If yes, press Next.
5. Select the type of SAP Groupware Connector you want to install. Check if you want to install instance of
Default Groupware Connector Proxy. Then press Next, wait while setup routine detects required
software.*
Now my questions are....
1. Where will this setup.exe come from?
2. Do we need to install the things in the same mannare listed above a,b,c,d?
3. As we are implementing CRM 2007, i hope we dont need install Mapbox.
Please help me in successfull Integration.
Thanks in Advance,
Ajay.

Hi Peter & Stephen
Thank your very much for quicke replies.
Peter in one of the messages Martin Dauer wrote the following recently on Oct 23 08. , so do you want me to confirm once again before proceeding further.
Re: Link between sap crm 2007 with lotus 8
Posted: Oct 23, 2008 10:30 PM    in response to: Naveen Raju       E-mail this message      Reply
Hi Naveen,
thanks for your detailed description. This is exactly the way how the Client GWI is getting set up. one little remark from my side on the steps.
The user field are not required to be filled if you use Lotus Notes. this is only for the case of MS Outlook where you can start the synch from the OL Screen as well.
The password field is not used with either groupware system. So you leave it blank and with the first replication run you are asked to type (and maybe save) your password. it is there as the application is shared with Mobiel sales as well and therfore we could not get rid of it.
Supported platforms
In general both the server and client GWI were tested with Lotus 8.0 and CRM 7.0.
For server GWI Domino 8 is already supported for greater CRM 5.0, so should work with LD 8.0.
The installation guide for GWI is available here ...
http://help.sap.com/saphelp_crm60/helpdata/en/44/559f3699d908fae10000000a422035/frameset.htm
I case of further issues pls contact me by mail or to this post.
best regards.
Martin
Thanks & Regards
Ajay

View Campaigns for BP outside of Interaction Center CRM 2007 / CRM 7.0

Hi Gurus
When using the Service Professional role for a given BP I would like to know what Campaigns he has been a part of.
It is very easy to view this in the Interaction Centre, but from the Service Professional Role I have not been able to view in CRM 2007.
Does anyone know if this can be doen for CRM 2007 or CRM 7.0
Thanks
Panduranga

anyone able to help with this please?

Help needed in displaying BI Queries, Views in CRM 2007

Hi Friends,
I am working on an upgrade project( CRM 2007 from CRM 5.0). In the earlier system, there are using portal for opportunity management. In portal on clicking Reports workcenter link, they were getting the following options.
Open Query - This gives the list of BI Queries.
Open View - This gives the list of views that are already created.
Save View - This gives the provision to save the view.
Now i need to replicate this functionality in NEW UI(CRM 2007). I am stuck up in how to approach this requirement.
Any pointers on this will be really helpful.
Thanks,
Udaya

Hi,
BI Content is shipped in the delivery version (D version). Before you can work with BI Content objects, you have to copy them from the delivery version (D version) to the active version (A version). This means that you must activate the BI Content.
You can collect the delivered BI Content in the function area BI Content of the Data Warehousing Workbench and copy it to the active version. This ensures that all additional required objects are automatically included, as is the sequence of activation. You can choose whether you want to copy, match, or not install the BI Content objects.
If you do not compare the versions, the delivery version is used and the active customer version is overwritten when you activate the BI Content.
We recommend that you install BI Content objects in the following cases:
After a BI Content release upgrade
An upgrade to a new BI Content release usually contains a large number of new and modified BI Content objects. If you want to use the new and modified BI Content, you have to reinstall the BI Content objects. Refer to the comments in the Release Notes for BI Content documentation for the particular release. They are available on help.sap.com ® SAP NetWeaver ® BI Content. In some cases, we recommend explicitly that you install the A versions of certain objects.
After installing a BI Content support package
Refer to the SAP Notes that are delivered with each Content support package. These SAP Notes contain information on why certain BI Content objects are being redelivered. An overview of the SAP Notes can be found at service.sap.com/bi ® Product Information SAP NetWeaver 7.0 BI ® Support Packages ® BI Business Content.
For More Information Go through the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
Regards,
Marasa.

How to install CRM 2007 on x64?

Hello,
I am trying to install CRM 2007 with SQL Server 2005 on Windows Server 2003 Standard Edition (x64) on a system which has x64 (Quad Core Intel Xeon) type processor. Now while installing i am getting a popup window with the following message:
The JDK installed in directory C:\j2sdk1.4.2_09 does not support the 64 bit data model. Choose a different JDK.
I have checked the http://java.sun.com website and i couldn't find any J2SDK release of 1.4.2 for x64 platform. How do i proceed from here onwards? Please Help.
Thanks and Regards,
Vasu

Hi,
check SAP Note 941595 - Download J2SE 1.4.2 for the x64 platform
for installation document check following
https://websmp208.sap-ag.de/~sapidb/011000358700001181992007E
regards,
kaushal

CRM 2007 Java Upgrade to CRM 7.0 EHP2

Hi All,
I performed dual stack split in CRM 2007 with separate DB for ABAP and JAVA. For upgrading CRM 2007 I tried generating solman XML file. For CRM 2007 Java, the target is chosen as CRM 7.0 EhP2, but the Net weaver components are showing the current version 700 SP21. I tried couple of times still NW 7.00 SP21 (current version) only appearing for target in solman. In Abap side, I got NW 7.03 as target for CRM 7.0EHP2 upgrade. Please advise what could be wrong.
Thanks,
Kavitha Rajan.

Ajay_Basis wrote:
Hi Srikishan,
>
> Actually we are having issues with the SAP router and we are unable to calculate the queue for EHP2 upgrade and hence we can't use EHP Installer upgrade. Could you please confirm if it is not possible using full upgrade (using SapUP) tools?
>
>
> Thanks,
> Ajay.
First, you have to use EHPi installer to do this upgrade. Second, for EHP2 upgrade, MOPZ is must because you need stack file that you can get from MOPZ only. Also, patches for EHP2, you can get from MOPZ only.
Thanks
Sunny

CRM 2007 _ Portal Integration

Hi all,
I have installed and configured CRM 2007 with Portal 7.0 as described in IMG.But still i am getting an error in some portal iviews "CRM and Portal RFC Destination has not been configured Correctly".
Does anybody have any steps for Configuring CRM 2007 and Portal Integration or any Url.
Thanks
Harini

Muralidhar,
I browsed through the notes and i couldnt find any relevant information on EP 7.0 and CRM 2007. I have configured portal (Ep 7.0) with CRM 5.0, BI 7.0, ECC 6.0 and SRM 5.0. Problem i am facing is only specific to CRM 2007 and Portal Integration not an general Portal Problem.
Thanks for the info.
Harini

CRM 2007 Interactive OLTP Reports - Showing No Data

Hi,
I am using CRM 2007 with in-built BI client and wanted to activate OLTP interactive reports. I have done settings as per C41_BB_ConfigGuide_EN_DE.doc document provided by SAP. But when I am executing these OLTP queries this shows these error .
1. System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6]
2. OLAP: General error on BI side.
And shows no data.
Please suggest a solution.....
Best Regards,
Lokesh Kumar
Edited by: Lokesh Kumar on Mar 9, 2009 2:59 PM
Pls reply someone

Hello Lokesh,
In SM30 maintain the Table SMOFPARSFA for the PARAMVAL field vaue of your BI interactive client.
I think it should help.
Best regards,
Partha Das

CRM upgrade with EHP inclusion

Hi All,
We are upgrading CRM 2007 to CRM 7. Both CRM Abap and Java stacks are installed seperately on different servers.
Can we inculde/ combine the CRM upgrade with CRM EHP1 upgrade? How big would be the time effort involved if we go ahead with CRM EHP1?
Thanks,
Antarpreet

Hi Antarpreet ,
Yes you can go straight from CRM 2007 to CRM 7 EHP1 in one step.
The main advantage is that you have the new functionality of EHP1 in a single project instead of upgrading to CRM 7 and then having to start another project to implement EHP1.
The guides are available at
http://service.sap.com/instguides
scroll down to
SAP CRM
on the main window
Select
SAP enhancement package 1 for SAP CRM 7.0
from the left side and click on upgrade for all the details on how to upgrade straight from CRM 2007 to CRM7 EHP1
Best regards,
Paul

CRM 2007 with CRM Mobile Infrastructure

Similar Messages

Maybe you are looking for